From mboxrd@z Thu Jan 1 00:00:00 1970 From: Christoph Hellwig Subject: Re: [ADVANSYS] Add basic highmem/DMA support Date: Wed, 23 Jun 2004 15:13:35 +0100 Sender: linux-scsi-owner@vger.kernel.org Message-ID: <20040623141335.GA23365@infradead.org> References: <20040508003906.GA26338@gondor.apana.org.au> <20040519103800.GA9891@gondor.apana.org.au> <1086026538.2004.7.camel@mulgrave> <40D69F56.2000307@torque.net> <1087828082.1797.17.camel@mulgrave> <40D924A5.5020705@torque.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from [213.146.154.40] ([213.146.154.40]:17303 "EHLO pentafluge.infradead.org") by vger.kernel.org with ESMTP id S265135AbUFWONq (ORCPT ); Wed, 23 Jun 2004 10:13:46 -0400 Content-Disposition: inline In-Reply-To: <40D924A5.5020705@torque.net> List-Id: linux-scsi@vger.kernel.org To: Douglas Gilbert Cc: James Bottomley , Herbert Xu , Gene Heskett , SCSI Mailing List There were actually two patches to advansys in that timeframe. Although it's much more likely that the dma api patch is the culprit can you test with the compat code cleanup patch below reversed?: # This is a BitKeeper generated diff -Nru style patch. # # ChangeSet # 2004/06/04 09:13:16-05:00 hch@lst.de # [PATCH] kill dead compat code in advansys # # I actually wanted to fix up the check_region usage there but got lost # in the mess. Let's start by kicking out the 2.2 compat and using scsi # layer constants instead of their own redefinitions first. # # Signed-off-by: James Bottomley # # drivers/scsi/advansys.c # 2004/06/04 06:19:50-05:00 hch@lst.de +119 -508 # kill dead compat code in advansys # diff -Nru a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c --- a/drivers/scsi/advansys.c 2004-06-23 07:12:13 -07:00 +++ b/drivers/scsi/advansys.c 2004-06-23 07:12:13 -07:00 @@ -756,27 +756,6 @@ */ - -/* - * --- Linux Version - */ - -#ifndef LINUX_VERSION_CODE -#include -#endif /* LINUX_VERSION_CODE */ - -/* Convert Linux Version, Patch-level, Sub-level to LINUX_VERSION_CODE. */ -#define ASC_LINUX_VERSION(V, P, S) (((V) * 65536) + ((P) * 256) + (S)) -#define ASC_LINUX_KERNEL22 (LINUX_VERSION_CODE < ASC_LINUX_VERSION(2,4,0)) -#define ASC_LINUX_KERNEL24 (LINUX_VERSION_CODE >= ASC_LINUX_VERSION(2,4,0)) - -/* Driver supported only in version 2.2 and version >= 2.4. */ -#if LINUX_VERSION_CODE < ASC_LINUX_VERSION(2,2,0) || \ - (LINUX_VERSION_CODE > ASC_LINUX_VERSION(2,3,0) && \ - LINUX_VERSION_CODE < ASC_LINUX_VERSION(2,4,0)) -#error "AdvanSys driver supported only in 2.2 and 2.4 or greater kernels." -#endif - /* * --- Linux Include Files */ @@ -875,9 +854,6 @@ typedef unsigned char uchar; -#ifndef NULL -#define NULL (0) -#endif #ifndef TRUE #define TRUE (1) #endif @@ -987,49 +963,6 @@ #define ASC_MIN_SENSE_LEN 14 #define ASC_MAX_CDB_LEN 12 #define ASC_SCSI_RESET_HOLD_TIME_US 60 -#define SCSICMD_TestUnitReady 0x00 -#define SCSICMD_Rewind 0x01 -#define SCSICMD_Rezero 0x01 -#define SCSICMD_RequestSense 0x03 -#define SCSICMD_Format 0x04 -#define SCSICMD_FormatUnit 0x04 -#define SCSICMD_Read6 0x08 -#define SCSICMD_Write6 0x0A -#define SCSICMD_Seek6 0x0B -#define SCSICMD_Inquiry 0x12 -#define SCSICMD_Verify6 0x13 -#define SCSICMD_ModeSelect6 0x15 -#define SCSICMD_ModeSense6 0x1A -#define SCSICMD_StartStopUnit 0x1B -#define SCSICMD_LoadUnloadTape 0x1B -#define SCSICMD_ReadCapacity 0x25 -#define SCSICMD_Read10 0x28 -#define SCSICMD_Write10 0x2A -#define SCSICMD_Seek10 0x2B -#define SCSICMD_Erase10 0x2C -#define SCSICMD_WriteAndVerify10 0x2E -#define SCSICMD_Verify10 0x2F -#define SCSICMD_WriteBuffer 0x3B -#define SCSICMD_ReadBuffer 0x3C -#define SCSICMD_ReadLong 0x3E -#define SCSICMD_WriteLong 0x3F -#define SCSICMD_ReadTOC 0x43 -#define SCSICMD_ReadHeader 0x44 -#define SCSICMD_ModeSelect10 0x55 -#define SCSICMD_ModeSense10 0x5A - -/* Inquiry Data Peripheral Device Types */ -#define SCSI_TYPE_DASD 0x00 -#define SCSI_TYPE_SASD 0x01 -#define SCSI_TYPE_PRN 0x02 -#define SCSI_TYPE_PROC 0x03 -#define SCSI_TYPE_WORM 0x04 -#define SCSI_TYPE_CDROM 0x05 -#define SCSI_TYPE_SCANNER 0x06 -#define SCSI_TYPE_OPTMEM 0x07 -#define SCSI_TYPE_MED_CHG 0x08 -#define SCSI_TYPE_COMM 0x09 -#define SCSI_TYPE_UNKNOWN 0x1F #define ADV_INQ_CLOCKING_ST_ONLY 0x0 #define ADV_INQ_CLOCKING_DT_ONLY 0x1 @@ -1048,36 +981,11 @@ #define ASC_SCSIDIR_T2H 0x08 #define ASC_SCSIDIR_H2T 0x10 #define ASC_SCSIDIR_NODATA 0x18 -#define SCSI_SENKEY_NO_SENSE 0x00 -#define SCSI_SENKEY_UNDEFINED 0x01 -#define SCSI_SENKEY_NOT_READY 0x02 -#define SCSI_SENKEY_MEDIUM_ERR 0x03 -#define SCSI_SENKEY_HW_ERR 0x04 -#define SCSI_SENKEY_ILLEGAL 0x05 -#define SCSI_SENKEY_ATTENTION 0x06 -#define SCSI_SENKEY_PROTECTED 0x07 -#define SCSI_SENKEY_BLANK 0x08 -#define SCSI_SENKEY_V_UNIQUE 0x09 -#define SCSI_SENKEY_CPY_ABORT 0x0A -#define SCSI_SENKEY_ABORT 0x0B -#define SCSI_SENKEY_EQUAL 0x0C -#define SCSI_SENKEY_VOL_OVERFLOW 0x0D -#define SCSI_SENKEY_MISCOMP 0x0E -#define SCSI_SENKEY_RESERVED 0x0F #define SCSI_ASC_NOMEDIA 0x3A #define ASC_SRB_HOST(x) ((uchar)((uchar)(x) >> 4)) #define ASC_SRB_TID(x) ((uchar)((uchar)(x) & (uchar)0x0F)) #define ASC_SRB_LUN(x) ((uchar)((uint)(x) >> 13)) #define PUT_CDB1(x) ((uchar)((uint)(x) >> 8)) -#define SS_GOOD 0x00 -#define SS_CHK_CONDITION 0x02 -#define SS_CONDITION_MET 0x04 -#define SS_TARGET_BUSY 0x08 -#define SS_INTERMID 0x10 -#define SS_INTERMID_COND_MET 0x14 -#define SS_RSERV_CONFLICT 0x18 -#define SS_CMD_TERMINATED 0x22 -#define SS_QUEUE_FULL 0x28 #define MS_CMD_DONE 0x00 #define MS_EXTEND 0x01 #define MS_SDTR_LEN 0x03 @@ -1086,26 +994,6 @@ #define MS_WDTR_CODE 0x03 #define MS_MDP_LEN 0x05 #define MS_MDP_CODE 0x00 -#define M1_SAVE_DATA_PTR 0x02 -#define M1_RESTORE_PTRS 0x03 -#define M1_DISCONNECT 0x04 -#define M1_INIT_DETECTED_ERR 0x05 -#define M1_ABORT 0x06 -#define M1_MSG_REJECT 0x07 -#define M1_NO_OP 0x08 -#define M1_MSG_PARITY_ERR 0x09 -#define M1_LINK_CMD_DONE 0x0A -#define M1_LINK_CMD_DONE_WFLAG 0x0B -#define M1_BUS_DVC_RESET 0x0C -#define M1_ABORT_TAG 0x0D -#define M1_CLR_QUEUE 0x0E -#define M1_INIT_RECOVERY 0x0F -#define M1_RELEASE_RECOVERY 0x10 -#define M1_KILL_IO_PROC 0x11 -#define M2_QTAG_MSG_SIMPLE 0x20 -#define M2_QTAG_MSG_HEAD 0x21 -#define M2_QTAG_MSG_ORDERED 0x22 -#define M2_IGNORE_WIDE_RESIDUE 0x23 /* * Inquiry data structure and bitfield macros @@ -3582,19 +3470,6 @@ #define NO_ISA_DMA 0xff /* No ISA DMA Channel Used */ -/* - * If the Linux kernel version supports freeing initialization code - * and data after loading, define macros for this purpose. These macros - * are not used when the driver is built as a module, cf. linux/init.h. - */ -#if ASC_LINUX_KERNEL24 -#define ASC_INITFUNC(type, func) type __init func -#elif ASC_LINUX_KERNEL22 -#define ASC_INITFUNC(type, func) __initfunc(type func) -#endif -#define ASC_INITDATA __initdata -#define ASC_INIT __init - #define ASC_INFO_SIZE 128 /* advansys_info() line size */ #ifdef CONFIG_PROC_FS @@ -3611,8 +3486,6 @@ } \ cp += len; \ } - -#define ASC_MIN(a, b) (((a) < (b)) ? (a) : (b)) #endif /* CONFIG_PROC_FS */ /* Asc Library return codes */ @@ -3686,53 +3559,6 @@ /* Return non-zero, if the queue is empty. */ #define ASC_QUEUE_EMPTY(ascq) ((ascq)->q_tidmask == 0) -/* PCI configuration declarations */ - -#define PCI_BASE_CLASS_PREDEFINED 0x00 -#define PCI_BASE_CLASS_MASS_STORAGE 0x01 -#define PCI_BASE_CLASS_NETWORK 0x02 -#define PCI_BASE_CLASS_DISPLAY 0x03 -#define PCI_BASE_CLASS_MULTIMEDIA 0x04 -#define PCI_BASE_CLASS_MEMORY_CONTROLLER 0x05 -#define PCI_BASE_CLASS_BRIDGE_DEVICE 0x06 - -/* MASS STORAGE */ -#define PCI_SUB_CLASS_SCSI_CONTROLLER 0x00 -#define PCI_SUB_CLASS_IDE_CONTROLLER 0x01 -#define PCI_SUB_CLASS_FLOPPY_DISK_CONTROLLER 0x02 -#define PCI_SUB_CLASS_IPI_BUS_CONTROLLER 0x03 -#define PCI_SUB_CLASS_OTHER_MASS_CONTROLLER 0x80 - -/* NETWORK CONTROLLER */ -#define PCI_SUB_CLASS_ETHERNET_CONTROLLER 0x00 -#define PCI_SUB_CLASS_TOKEN_RING_CONTROLLER 0x01 -#define PCI_SUB_CLASS_FDDI_CONTROLLER 0x02 -#define PCI_SUB_CLASS_OTHER_NETWORK_CONTROLLER 0x80 - -/* DISPLAY CONTROLLER */ -#define PCI_SUB_CLASS_VGA_CONTROLLER 0x00 -#define PCI_SUB_CLASS_XGA_CONTROLLER 0x01 -#define PCI_SUB_CLASS_OTHER_DISPLAY_CONTROLLER 0x80 - -/* MULTIMEDIA CONTROLLER */ -#define PCI_SUB_CLASS_VIDEO_DEVICE 0x00 -#define PCI_SUB_CLASS_AUDIO_DEVICE 0x01 -#define PCI_SUB_CLASS_OTHER_MULTIMEDIA_DEVICE 0x80 - -/* MEMORY CONTROLLER */ -#define PCI_SUB_CLASS_RAM_CONTROLLER 0x00 -#define PCI_SUB_CLASS_FLASH_CONTROLLER 0x01 -#define PCI_SUB_CLASS_OTHER_MEMORY_CONTROLLER 0x80 - -/* BRIDGE CONTROLLER */ -#define PCI_SUB_CLASS_HOST_BRIDGE_CONTROLLER 0x00 -#define PCI_SUB_CLASS_ISA_BRIDGE_CONTROLLER 0x01 -#define PCI_SUB_CLASS_EISA_BRIDGE_CONTROLLER 0x02 -#define PCI_SUB_CLASS_MC_BRIDGE_CONTROLLER 0x03 -#define PCI_SUB_CLASS_PCI_TO_PCI_BRIDGE_CONTROLLER 0x04 -#define PCI_SUB_CLASS_PCMCIA_BRIDGE_CONTROLLER 0x05 -#define PCI_SUB_CLASS_OTHER_BRIDGE_CONTROLLER 0x80 - #define PCI_MAX_SLOT 0x1F #define PCI_MAX_BUS 0xFF #define PCI_IOADDRESS_MASK 0xFFFE @@ -3745,25 +3571,6 @@ #define ASC_PCI_DEVICE_ID_2500 0x2500 /* ASC-38C0800 */ #define ASC_PCI_DEVICE_ID_2700 0x2700 /* ASC-38C1600 */ -/* PCI IO Port Addresses to generate special cycle */ - -#define PCI_CONFIG_ADDRESS_MECH1 0x0CF8 -#define PCI_CONFIG_DATA_MECH1 0x0CFC - -#define PCI_CONFIG_FORWARD_REGISTER 0x0CFA /* 0=type 0; 1=type 1; */ - -#define PCI_CONFIG_BUS_NUMBER_MASK 0x00FF0000 -#define PCI_CONFIG_DEVICE_FUNCTION_MASK 0x0000FF00 -#define PCI_CONFIG_REGISTER_NUMBER_MASK 0x000000F8 - -#define PCI_DEVICE_FOUND 0x0000 -#define PCI_DEVICE_NOT_FOUND 0xffff - -#define SUBCLASS_OFFSET 0x0A -#define CLASSCODE_OFFSET 0x0B -#define VENDORID_OFFSET 0x00 -#define DEVICEID_OFFSET 0x02 - #ifndef ADVANSYS_STATS #define ASC_STATS(shp, counter) #define ASC_STATS_ADD(shp, counter, count) @@ -4146,19 +3953,6 @@ /* Note: All driver global data should be initialized. */ -#if ASC_LINUX_KERNEL22 -#ifdef CONFIG_PROC_FS -struct proc_dir_entry proc_scsi_advansys = -{ - PROC_SCSI_ADVANSYS, /* unsigned short low_ino */ - 8, /* unsigned short namelen */ - "advansys", /* const char *name */ - S_IFDIR | S_IRUGO | S_IXUGO, /* mode_t mode */ - 2 /* nlink_t nlink */ -}; -#endif /* CONFIG_PROC_FS */ -#endif /* ASC_LINUX_KERNEL22 */ - /* Number of boards detected in system. */ STATIC int asc_board_count = 0; STATIC struct Scsi_Host *asc_host[ASC_NUM_BOARD_SUPPORTED] = { 0 }; @@ -4173,7 +3967,7 @@ STATIC ASC_SG_HEAD asc_sg_head = { 0 }; /* List of supported bus types. */ -STATIC ushort asc_bus[ASC_NUM_BUS] ASC_INITDATA = { +STATIC ushort asc_bus[ASC_NUM_BUS] __initdata = { ASC_IS_ISA, ASC_IS_VL, ASC_IS_EISA, @@ -4506,10 +4300,8 @@ * it must not call SCSI mid-level functions including scsi_malloc() * and scsi_free(). */ -ASC_INITFUNC( -int, +int __init advansys_detect(Scsi_Host_Template *tpnt) -) { static int detect_called = ASC_FALSE; int iop; @@ -4552,12 +4344,6 @@ ASC_DBG(1, "advansys_detect: begin\n"); -#if ASC_LINUX_KERNEL24 - tpnt->proc_name = "advansys"; -#elif ASC_LINUX_KERNEL22 - tpnt->proc_dir = &proc_scsi_advansys; -#endif - asc_board_count = 0; /* @@ -4683,13 +4469,9 @@ NULL) { pci_device_id_cnt++; } else { -#if ASC_LINUX_KERNEL24 if (pci_enable_device(pci_devp) == 0) { pci_devicep[pci_card_cnt_max++] = pci_devp; } -#elif ASC_LINUX_KERNEL22 - pci_devicep[pci_card_cnt_max++] = pci_devp; -#endif } } @@ -4726,11 +4508,7 @@ ASC_DBG2(2, "advansys_detect: devfn %d, bus number %d\n", pci_devp->devfn, pci_devp->bus->number); -#if ASC_LINUX_KERNEL24 iop = pci_resource_start(pci_devp, 0); -#elif ASC_LINUX_KERNEL22 - iop = pci_devp->base_address[0] & PCI_IOADDRESS_MASK; -#endif ASC_DBG2(1, "advansys_detect: vendorID %X, deviceID %X\n", pci_devp->vendor, pci_devp->device); @@ -4854,11 +4632,7 @@ iolen = ADV_38C1600_IOLEN; } #ifdef CONFIG_PCI -#if ASC_LINUX_KERNEL24 pci_memory_address = pci_resource_start(pci_devp, 1); -#elif ASC_LINUX_KERNEL22 - pci_memory_address = pci_devp->base_address[1]; -#endif ASC_DBG1(1, "advansys_detect: pci_memory_address: 0x%lx\n", (ulong) pci_memory_address); if ((boardp->ioremap_addr = @@ -5326,11 +5100,7 @@ /* BIOS start address. */ if (ASC_NARROW_BOARD(boardp)) { -#if ASC_LINUX_KERNEL24 shp->base = -#elif ASC_LINUX_KERNEL22 - shp->base = (char *) -#endif ((ulong) AscGetChipBiosAddress( asc_dvc_varp->iop_base, asc_dvc_varp->bus_type)); @@ -5365,11 +5135,7 @@ * Convert x86 realmode code segment to a linear * address by shifting left 4. */ - shp->base = -#if ASC_LINUX_KERNEL22 - (char *) -#endif - ((ulong) boardp->bios_codeseg << 4); + shp->base = ((ulong) boardp->bios_codeseg << 4); } else { shp->base = 0; } @@ -5390,7 +5156,6 @@ ASC_DBG2(2, "advansys_detect: request_region port 0x%lx, len 0x%x\n", (ulong) shp->io_port, boardp->asc_n_io_port); -#if ASC_LINUX_KERNEL24 if (request_region(shp->io_port, boardp->asc_n_io_port, "advansys") == NULL) { ASC_PRINT3( @@ -5403,9 +5168,6 @@ asc_board_count--; continue; } -#elif ASC_LINUX_KERNEL22 - request_region(shp->io_port, boardp->asc_n_io_port, "advansys"); -#endif /* Register DMA Channel for Narrow boards. */ shp->dma_channel = NO_ISA_DMA; /* Default to no ISA DMA. */ @@ -6154,10 +5916,8 @@ * ints[2] - second argument * ... */ -ASC_INITFUNC( -void, +void __init advansys_setup(char *str, int *ints) -) { int i; @@ -6687,9 +6447,9 @@ */ if ((boardp->dvc_var.asc_dvc_var.cur_dvc_qng[scp->device->id] > 0) && (boardp->reqcnt[scp->device->id] % 255) == 0) { - asc_scsi_q.q2.tag_code = M2_QTAG_MSG_ORDERED; + asc_scsi_q.q2.tag_code = MSG_ORDERED_TAG; } else { - asc_scsi_q.q2.tag_code = M2_QTAG_MSG_SIMPLE; + asc_scsi_q.q2.tag_code = MSG_SIMPLE_TAG; } /* @@ -7123,14 +6883,13 @@ * If an INQUIRY command completed successfully, then call * the AscInquiryHandling() function to set-up the device. */ - if (scp->cmnd[0] == SCSICMD_Inquiry && scp->device->lun == 0 && + if (scp->cmnd[0] == INQUIRY && scp->device->lun == 0 && (scp->request_bufflen - qdonep->remain_bytes) >= 8) { AscInquiryHandling(asc_dvc_varp, scp->device->id & 0x7, (ASC_SCSI_INQUIRY *) scp->request_buffer); } -#if ASC_LINUX_KERNEL24 /* * Check for an underrun condition. * @@ -7143,15 +6902,14 @@ (unsigned) qdonep->remain_bytes); scp->resid = qdonep->remain_bytes; } -#endif break; case QD_WITH_ERROR: ASC_DBG(2, "asc_isr_callback: QD_WITH_ERROR\n"); switch (qdonep->d3.host_stat) { case QHSTA_NO_ERROR: - if (qdonep->d3.scsi_stat == SS_CHK_CONDITION) { - ASC_DBG(2, "asc_isr_callback: SS_CHK_CONDITION\n"); + if (qdonep->d3.scsi_stat == SAM_STAT_CHECK_CONDITION) { + ASC_DBG(2, "asc_isr_callback: SAM_STAT_CHECK_CONDITION\n"); ASC_DBG_PRT_SENSE(2, scp->sense_buffer, sizeof(scp->sense_buffer)); /* @@ -7229,9 +6987,7 @@ Scsi_Cmnd *scp; struct Scsi_Host *shp; int i; -#if ASC_LINUX_KERNEL24 ADV_DCNT resid_cnt; -#endif ASC_DBG2(1, "adv_isr_callback: adv_dvc_varp 0x%lx, scsiqp 0x%lx\n", @@ -7314,7 +7070,6 @@ ASC_DBG(2, "adv_isr_callback: QD_NO_ERROR\n"); scp->result = 0; -#if ASC_LINUX_KERNEL24 /* * Check for an underrun condition. * @@ -7328,15 +7083,14 @@ (ulong) resid_cnt); scp->resid = resid_cnt; } -#endif break; case QD_WITH_ERROR: ASC_DBG(2, "adv_isr_callback: QD_WITH_ERROR\n"); switch (scsiqp->host_status) { case QHSTA_NO_ERROR: - if (scsiqp->scsi_status == SS_CHK_CONDITION) { - ASC_DBG(2, "adv_isr_callback: SS_CHK_CONDITION\n"); + if (scsiqp->scsi_status == SAM_STAT_CHECK_CONDITION) { + ASC_DBG(2, "adv_isr_callback: SAM_STAT_CHECK_CONDITION\n"); ASC_DBG_PRT_SENSE(2, scp->sense_buffer, sizeof(scp->sense_buffer)); /* @@ -8902,7 +8656,7 @@ (unsigned) offset, (unsigned) advoffset, cplen); if (offset <= advoffset) { /* Read offset below current offset, copy everything. */ - cnt = ASC_MIN(cplen, leftlen); + cnt = min(cplen, leftlen); ASC_DBG3(2, "asc_proc_copy: curbuf 0x%lx, cp 0x%lx, cnt %d\n", (ulong) curbuf, (ulong) cp, cnt); memcpy(curbuf, cp, cnt); @@ -8910,7 +8664,7 @@ /* Read offset within current range, partial copy. */ cnt = (advoffset + cplen) - offset; cp = (cp + cplen) - cnt; - cnt = ASC_MIN(cnt, leftlen); + cnt = min(cnt, leftlen); ASC_DBG3(2, "asc_proc_copy: curbuf 0x%lx, cp 0x%lx, cnt %d\n", (ulong) curbuf, (ulong) cp, cnt); memcpy(curbuf, cp, cnt); @@ -8943,7 +8697,7 @@ (void) printk(s); ret = 0; } else { - ret = ASC_MIN(buflen, ret); + ret = min(buflen, ret); memcpy(buf, s, ret); } va_end(args); @@ -9046,12 +8800,10 @@ /* * Read a PCI configuration byte. */ -ASC_INITFUNC( -STATIC uchar, +STATIC uchar __init DvcReadPCIConfigByte( ASC_DVC_VAR *asc_dvc, ushort offset) -) { #ifdef CONFIG_PCI uchar byte_data; @@ -9065,13 +8817,11 @@ /* * Write a PCI configuration byte. */ -ASC_INITFUNC( -STATIC void, +STATIC void __init DvcWritePCIConfigByte( ASC_DVC_VAR *asc_dvc, ushort offset, uchar byte_data) -) { #ifdef CONFIG_PCI pci_write_config_byte(to_pci_dev(asc_dvc->cfg->dev), offset, byte_data); @@ -9082,13 +8832,10 @@ * Return the BIOS address of the adapter at the specified * I/O port and with the specified bus type. */ -ASC_INITFUNC( -STATIC ushort, +STATIC ushort __init AscGetChipBiosAddress( PortAddr iop_base, - ushort bus_type -) -) + ushort bus_type) { ushort cfg_lsw; ushort bios_addr; @@ -9163,12 +8910,10 @@ /* * Read a PCI configuration byte. */ -ASC_INITFUNC( -STATIC uchar, +STATIC uchar __init DvcAdvReadPCIConfigByte( ADV_DVC_VAR *asc_dvc, ushort offset) -) { #ifdef CONFIG_PCI uchar byte_data; @@ -9182,13 +8927,11 @@ /* * Write a PCI configuration byte. */ -ASC_INITFUNC( -STATIC void, +STATIC void __init DvcAdvWritePCIConfigByte( ADV_DVC_VAR *asc_dvc, ushort offset, uchar byte_data) -) { #ifdef CONFIG_PCI pci_write_config_byte(to_pci_dev(asc_dvc->cfg->dev), offset, byte_data); @@ -9402,16 +9145,6 @@ s->host_busy, s->host_no, (unsigned) s->last_reset); -#if ASC_LINUX_KERNEL24 - printk( -" hostt 0x%lx\n", - (ulong) s->hostt); -#elif ASC_LINUX_KERNEL22 - printk( -" host_queue 0x%lx, hostt 0x%lx, block 0x%lx,\n", - (ulong) s->host_queue, (ulong) s->hostt, (ulong) s->block); -#endif - printk( " base 0x%lx, io_port 0x%lx, n_io_port %u, irq 0x%x,\n", (ulong) s->base, (ulong) s->io_port, s->n_io_port, s->irq); @@ -9448,11 +9181,9 @@ asc_prt_hex(" CDB", s->cmnd, s->cmd_len); -#if ASC_LINUX_KERNEL24 printk ( "sc_data_direction %u, resid %d\n", s->sc_data_direction, s->resid); -#endif printk( " use_sg %u, sglist_len %u, abort_reason 0x%x\n", @@ -9467,15 +9198,9 @@ " timeout_per_command %d, timeout_total %d, timeout %d\n", s->timeout_per_command, s->timeout_total, s->timeout); -#if ASC_LINUX_KERNEL24 printk( " internal_timeout %u, flags %u\n", s->internal_timeout, s->flags); -#elif ASC_LINUX_KERNEL22 - printk( -" internal_timeout %u, flags %u, this_count %d\n", - s->internal_timeout, s->flags,s->this_count); -#endif printk( " scsi_done 0x%lx, done 0x%lx, host_scribble 0x%lx, result 0x%x\n", @@ -9832,12 +9557,9 @@ * --- Asc Library Functions */ -ASC_INITFUNC( -STATIC ushort, +STATIC ushort __init AscGetEisaChipCfg( - PortAddr iop_base -) -) + PortAddr iop_base) { PortAddr eisa_cfg_iop; @@ -9846,13 +9568,11 @@ return (inpw(eisa_cfg_iop)); } -ASC_INITFUNC( -STATIC uchar, +STATIC uchar __init AscSetChipScsiID( PortAddr iop_base, uchar new_host_id ) -) { ushort cfg_lsw; @@ -9866,12 +9586,9 @@ return (AscGetChipScsiID(iop_base)); } -ASC_INITFUNC( -STATIC uchar, +STATIC uchar __init AscGetChipScsiCtrl( - PortAddr iop_base -) -) + PortAddr iop_base) { uchar sc; @@ -9881,13 +9598,11 @@ return (sc); } -ASC_INITFUNC( -STATIC uchar, +STATIC uchar __init AscGetChipVersion( PortAddr iop_base, ushort bus_type ) -) { if ((bus_type & ASC_IS_EISA) != 0) { PortAddr eisa_iop; @@ -9900,12 +9615,9 @@ return (AscGetChipVerNo(iop_base)); } -ASC_INITFUNC( -STATIC ushort, +STATIC ushort __init AscGetChipBusType( - PortAddr iop_base -) -) + PortAddr iop_base) { ushort chip_ver; @@ -9985,22 +9697,19 @@ return (0); } -STATIC PortAddr _asc_def_iop_base[ASC_IOADR_TABLE_MAX_IX] ASC_INITDATA = +STATIC PortAddr _asc_def_iop_base[ASC_IOADR_TABLE_MAX_IX] __initdata = { 0x100, ASC_IOADR_1, 0x120, ASC_IOADR_2, 0x140, ASC_IOADR_3, ASC_IOADR_4, ASC_IOADR_5, ASC_IOADR_6, ASC_IOADR_7, ASC_IOADR_8 }; #ifdef CONFIG_ISA -STATIC uchar _isa_pnp_inited ASC_INITDATA = 0; +STATIC uchar _isa_pnp_inited __initdata = 0; -ASC_INITFUNC( -STATIC PortAddr, +STATIC PortAddr __init AscSearchIOPortAddr( PortAddr iop_beg, - ushort bus_type -) -) + ushort bus_type) { if (bus_type & ASC_IS_VL) { while ((iop_beg = AscSearchIOPortAddr11(iop_beg)) != 0) { @@ -10031,12 +9740,10 @@ return (0); } -ASC_INITFUNC( -STATIC PortAddr, +STATIC PortAddr __init AscSearchIOPortAddr11( PortAddr s_addr ) -) { int i; PortAddr iop_base; @@ -10062,11 +9769,8 @@ return (0); } -ASC_INITFUNC( -STATIC void, -AscSetISAPNPWaitForKey( - void) -) +STATIC void __init +AscSetISAPNPWaitForKey(void) { outp(ASC_ISA_PNP_PORT_ADDR, 0x02); outp(ASC_ISA_PNP_PORT_WRITE, 0x02); @@ -10074,25 +9778,20 @@ } #endif /* CONFIG_ISA */ -ASC_INITFUNC( -STATIC void, +STATIC void __init AscToggleIRQAct( PortAddr iop_base ) -) { AscSetChipStatus(iop_base, CIW_IRQ_ACT); AscSetChipStatus(iop_base, 0); return; } -ASC_INITFUNC( -STATIC uchar, +STATIC uchar __init AscGetChipIRQ( PortAddr iop_base, - ushort bus_type -) -) + ushort bus_type) { ushort cfg_lsw; uchar chip_irq; @@ -10122,14 +9821,11 @@ return ((uchar) (chip_irq + ASC_MIN_IRQ_NO)); } -ASC_INITFUNC( -STATIC uchar, +STATIC uchar __init AscSetChipIRQ( PortAddr iop_base, uchar irq_no, - ushort bus_type -) -) + ushort bus_type) { ushort cfg_lsw; @@ -10164,12 +9860,9 @@ } #ifdef CONFIG_ISA -ASC_INITFUNC( -STATIC void, +STATIC void __init AscEnableIsaDma( - uchar dma_channel -) -) + uchar dma_channel) { if (dma_channel < 4) { outp(0x000B, (ushort) (0xC0 | dma_channel)); @@ -10330,7 +10023,7 @@ return (0); } else { - ext_msg.msg_type = M1_MSG_REJECT; + ext_msg.msg_type = MESSAGE_REJECT; AscMemWordCopyPtrToLram(iop_base, ASCV_MSGOUT_BEG, (uchar *) &ext_msg, @@ -10430,7 +10123,7 @@ (ushort) ASCV_SCSIBUSY_B, scsi_busy); asc_dvc->queue_full_or_busy |= target_id; - if (scsi_status == SS_QUEUE_FULL) { + if (scsi_status == SAM_STAT_TASK_SET_FULL) { if (cur_dvc_qng > ASC_MIN_TAGGED_CMD) { cur_dvc_qng -= 1; asc_dvc->max_dvc_qng[tid_no] = cur_dvc_qng; @@ -10777,7 +10470,7 @@ } else { if ((AscReadLramByte(iop_base, (ushort) (q_addr + (ushort) ASC_SCSIQ_CDB_BEG)) == - SCSICMD_StartStopUnit)) { + START_STOP)) { asc_dvc->unit_not_ready &= ~target_id; if (scsiq->d3.done_stat != QD_NO_ERROR) { asc_dvc->start_motor &= ~target_id; @@ -11050,14 +10743,14 @@ #define ASC_SYN_OFFSET_ONE_DISABLE_LIST 16 STATIC uchar _syn_offset_one_disable_cmd[ASC_SYN_OFFSET_ONE_DISABLE_LIST] = { - SCSICMD_Inquiry, - SCSICMD_RequestSense, - SCSICMD_ReadCapacity, - SCSICMD_ReadTOC, - SCSICMD_ModeSelect6, - SCSICMD_ModeSense6, - SCSICMD_ModeSelect10, - SCSICMD_ModeSense10, + INQUIRY, + REQUEST_SENSE, + READ_CAPACITY, + READ_TOC, + MODE_SELECT, + MODE_SENSE, + MODE_SELECT_10, + MODE_SENSE_10, 0xFF, 0xFF, 0xFF, @@ -11110,7 +10803,7 @@ target_ix = scsiq->q2.target_ix; tid_no = ASC_TIX_TO_TID(target_ix); n_q_required = 1; - if (scsiq->cdbptr[0] == SCSICMD_RequestSense) { + if (scsiq->cdbptr[0] == REQUEST_SENSE) { if ((asc_dvc->init_sdtr & scsiq->q1.target_id) != 0) { asc_dvc->sdtr_done &= ~scsiq->q1.target_id; sdtr_data = AscGetMCodeInitSDTRAtID(iop_base, tid_no); @@ -11179,7 +10872,7 @@ } } if (disable_syn_offset_one_fix) { - scsiq->q2.tag_code &= ~M2_QTAG_MSG_SIMPLE; + scsiq->q2.tag_code &= ~MSG_SIMPLE_TAG; scsiq->q2.tag_code |= (ASC_TAG_FLAG_DISABLE_ASYN_USE_SYN_FIX | ASC_TAG_FLAG_DISABLE_DISCONNECT); } else { @@ -11188,8 +10881,8 @@ if ((scsiq->q1.cntl & QC_SG_HEAD) != 0) { if (asc_dvc->bug_fix_cntl) { if (asc_dvc->bug_fix_cntl & ASC_BUG_FIX_IF_NOT_DWB) { - if ((scsi_cmd == SCSICMD_Read6) || - (scsi_cmd == SCSICMD_Read10)) { + if ((scsi_cmd == READ_6) || + (scsi_cmd == READ_10)) { addr = (ADV_PADDR) le32_to_cpu( sg_head->sg_list[sg_entry_cnt_minus_one].addr) + @@ -11238,8 +10931,8 @@ } else { if (asc_dvc->bug_fix_cntl) { if (asc_dvc->bug_fix_cntl & ASC_BUG_FIX_IF_NOT_DWB) { - if ((scsi_cmd == SCSICMD_Read6) || - (scsi_cmd == SCSICMD_Read10)) { + if ((scsi_cmd == READ_6) || + (scsi_cmd == READ_10)) { addr = le32_to_cpu(scsiq->q1.data_addr) + le32_to_cpu(scsiq->q1.data_cnt); extra_bytes = (uchar) ((ushort) addr & 0x0003); @@ -11410,7 +11103,7 @@ } q_addr = ASC_QNO_TO_QADDR(q_no); if ((scsiq->q1.target_id & asc_dvc->use_tagged_qng) == 0) { - scsiq->q2.tag_code &= ~M2_QTAG_MSG_SIMPLE; + scsiq->q2.tag_code &= ~MSG_SIMPLE_TAG ; } scsiq->q1.status = QS_FREE; AscMemWordCopyPtrToLram(iop_base, @@ -11907,12 +11600,9 @@ } #ifdef CONFIG_ISA -ASC_INITFUNC( -STATIC ASC_DCNT, +STATIC ASC_DCNT __init AscGetEisaProductID( - PortAddr iop_base -) -) + PortAddr iop_base) { PortAddr eisa_iop; ushort product_id_high, product_id_low; @@ -11926,12 +11616,9 @@ return (product_id); } -ASC_INITFUNC( -STATIC PortAddr, +STATIC PortAddr __init AscSearchIOPortAddrEISA( - PortAddr iop_base -) -) + PortAddr iop_base) { ASC_DCNT eisa_product_id; @@ -12125,12 +11812,9 @@ return (AscIsChipHalted(iop_base)); } -ASC_INITFUNC( -STATIC ASC_DCNT, +STATIC ASC_DCNT __init AscGetMaxDmaCount( - ushort bus_type -) -) + ushort bus_type) { if (bus_type & ASC_IS_ISA) return (ASC_MAX_ISA_DMA_COUNT); @@ -12140,12 +11824,9 @@ } #ifdef CONFIG_ISA -ASC_INITFUNC( -STATIC ushort, +STATIC ushort __init AscGetIsaDmaChannel( - PortAddr iop_base -) -) + PortAddr iop_base) { ushort channel; @@ -12157,13 +11838,10 @@ return (channel + 4); } -ASC_INITFUNC( -STATIC ushort, +STATIC ushort __init AscSetIsaDmaChannel( PortAddr iop_base, - ushort dma_channel -) -) + ushort dma_channel) { ushort cfg_lsw; uchar value; @@ -12181,13 +11859,10 @@ return (0); } -ASC_INITFUNC( -STATIC uchar, +STATIC uchar __init AscSetIsaDmaSpeed( PortAddr iop_base, - uchar speed_value -) -) + uchar speed_value) { speed_value &= 0x07; AscSetBank(iop_base, 1); @@ -12196,12 +11871,10 @@ return (AscGetIsaDmaSpeed(iop_base)); } -ASC_INITFUNC( -STATIC uchar, +STATIC uchar __init AscGetIsaDmaSpeed( PortAddr iop_base ) -) { uchar speed_value; @@ -12213,12 +11886,10 @@ } #endif /* CONFIG_ISA */ -ASC_INITFUNC( -STATIC ushort, +STATIC ushort __init AscReadPCIConfigWord( ASC_DVC_VAR *asc_dvc, ushort pci_config_offset) -) { uchar lsb, msb; @@ -12227,12 +11898,10 @@ return ((ushort) ((msb << 8) | lsb)); } -ASC_INITFUNC( -STATIC ushort, +STATIC ushort __init AscInitGetConfig( ASC_DVC_VAR *asc_dvc ) -) { ushort warn_code; PortAddr iop_base; @@ -12312,12 +11981,10 @@ return(warn_code); } -ASC_INITFUNC( -STATIC ushort, +STATIC ushort __init AscInitSetConfig( ASC_DVC_VAR *asc_dvc ) -) { ushort warn_code = 0; @@ -12333,12 +12000,10 @@ return (warn_code); } -ASC_INITFUNC( -STATIC ushort, +STATIC ushort __init AscInitFromAscDvcVar( ASC_DVC_VAR *asc_dvc ) -) { PortAddr iop_base; ushort cfg_msw; @@ -12438,12 +12103,9 @@ return (warn_code); } -ASC_INITFUNC( -STATIC ushort, +STATIC ushort __init AscInitAscDvcVar( - ASC_DVC_VAR *asc_dvc -) -) + ASC_DVC_VAR *asc_dvc) { int i; PortAddr iop_base; @@ -12553,12 +12215,8 @@ return (warn_code); } -ASC_INITFUNC( -STATIC ushort, -AscInitFromEEP( - ASC_DVC_VAR *asc_dvc -) -) +STATIC ushort __init +AscInitFromEEP(ASC_DVC_VAR *asc_dvc) { ASCEEP_CONFIG eep_config_buf; ASCEEP_CONFIG *eep_config; @@ -12774,12 +12432,9 @@ return (warn_code); } -ASC_INITFUNC( -STATIC int, +STATIC int __init AscTestExternalLram( - ASC_DVC_VAR *asc_dvc -) -) + ASC_DVC_VAR *asc_dvc) { PortAddr iop_base; ushort q_addr; @@ -12801,13 +12456,11 @@ return (sta); } -ASC_INITFUNC( -STATIC int, +STATIC int __init AscWriteEEPCmdReg( PortAddr iop_base, uchar cmd_reg ) -) { uchar read_back; int retry; @@ -12826,13 +12479,11 @@ } } -ASC_INITFUNC( -STATIC int, +STATIC int __init AscWriteEEPDataReg( PortAddr iop_base, ushort data_reg ) -) { ushort read_back; int retry; @@ -12851,35 +12502,24 @@ } } -ASC_INITFUNC( -STATIC void, -AscWaitEEPRead( - void -) -) +STATIC void __init +AscWaitEEPRead(void) { DvcSleepMilliSecond(1); return; } -ASC_INITFUNC( -STATIC void, -AscWaitEEPWrite( - void -) -) +STATIC void __init +AscWaitEEPWrite(void) { DvcSleepMilliSecond(20); return; } -ASC_INITFUNC( -STATIC ushort, +STATIC ushort __init AscReadEEPWord( PortAddr iop_base, - uchar addr -) -) + uchar addr) { ushort read_wval; uchar cmd_reg; @@ -12894,14 +12534,11 @@ return (read_wval); } -ASC_INITFUNC( -STATIC ushort, +STATIC ushort __init AscWriteEEPWord( PortAddr iop_base, uchar addr, - ushort word_val -) -) + ushort word_val) { ushort read_wval; @@ -12921,13 +12558,10 @@ return (read_wval); } -ASC_INITFUNC( -STATIC ushort, +STATIC ushort __init AscGetEEPConfig( PortAddr iop_base, - ASCEEP_CONFIG * cfg_buf, ushort bus_type -) -) + ASCEEP_CONFIG * cfg_buf, ushort bus_type) { ushort wval; ushort sum; @@ -12973,13 +12607,10 @@ return (sum); } -ASC_INITFUNC( -STATIC int, +STATIC int __init AscSetEEPConfigOnce( PortAddr iop_base, - ASCEEP_CONFIG * cfg_buf, ushort bus_type -) -) + ASCEEP_CONFIG * cfg_buf, ushort bus_type) { int n_error; ushort *wbuf; @@ -13071,13 +12702,11 @@ return (n_error); } -ASC_INITFUNC( -STATIC int, +STATIC int __init AscSetEEPConfig( PortAddr iop_base, ASCEEP_CONFIG * cfg_buf, ushort bus_type ) -) { int retry; int n_error; @@ -13111,17 +12740,17 @@ { if (!(asc_dvc->init_sdtr & tid_bits)) { - if ((dvc_type == SCSI_TYPE_CDROM) && + if ((dvc_type == TYPE_ROM) && (AscCompareString((uchar *) inq->vendor_id, (uchar *) "HP ", 3) == 0)) { asc_dvc->pci_fix_asyn_xfer_always |= tid_bits; } asc_dvc->pci_fix_asyn_xfer |= tid_bits; - if ((dvc_type == SCSI_TYPE_PROC) || - (dvc_type == SCSI_TYPE_SCANNER) || - (dvc_type == SCSI_TYPE_CDROM) || - (dvc_type == SCSI_TYPE_SASD)) + if ((dvc_type == TYPE_PROCESSOR) || + (dvc_type == TYPE_SCANNER) || + (dvc_type == TYPE_ROM) || + (dvc_type == TYPE_TAPE)) { asc_dvc->pci_fix_asyn_xfer &= ~tid_bits; } @@ -14515,7 +14144,7 @@ * unswapped on big-endian platforms. */ STATIC ADVEEP_3550_CONFIG -Default_3550_EEPROM_Config ASC_INITDATA = { +Default_3550_EEPROM_Config __initdata = { ADV_EEPROM_BIOS_ENABLE, /* cfg_lsw */ 0x0000, /* cfg_msw */ 0xFFFF, /* disc_enable */ @@ -14553,7 +14182,7 @@ }; STATIC ADVEEP_3550_CONFIG -ADVEEP_3550_Config_Field_IsChar ASC_INITDATA = { +ADVEEP_3550_Config_Field_IsChar __initdata = { 0, /* cfg_lsw */ 0, /* cfg_msw */ 0, /* -disc_enable */ @@ -14591,7 +14220,7 @@ }; STATIC ADVEEP_38C0800_CONFIG -Default_38C0800_EEPROM_Config ASC_INITDATA = { +Default_38C0800_EEPROM_Config __initdata = { ADV_EEPROM_BIOS_ENABLE, /* 00 cfg_lsw */ 0x0000, /* 01 cfg_msw */ 0xFFFF, /* 02 disc_enable */ @@ -14656,7 +14285,7 @@ }; STATIC ADVEEP_38C0800_CONFIG -ADVEEP_38C0800_Config_Field_IsChar ASC_INITDATA = { +ADVEEP_38C0800_Config_Field_IsChar __initdata = { 0, /* 00 cfg_lsw */ 0, /* 01 cfg_msw */ 0, /* 02 disc_enable */ @@ -14721,7 +14350,7 @@ }; STATIC ADVEEP_38C1600_CONFIG -Default_38C1600_EEPROM_Config ASC_INITDATA = { +Default_38C1600_EEPROM_Config __initdata = { ADV_EEPROM_BIOS_ENABLE, /* 00 cfg_lsw */ 0x0000, /* 01 cfg_msw */ 0xFFFF, /* 02 disc_enable */ @@ -14786,7 +14415,7 @@ }; STATIC ADVEEP_38C1600_CONFIG -ADVEEP_38C1600_Config_Field_IsChar ASC_INITDATA = { +ADVEEP_38C1600_Config_Field_IsChar __initdata = { 0, /* 00 cfg_lsw */ 0, /* 01 cfg_msw */ 0, /* 02 disc_enable */ @@ -14858,10 +14487,8 @@ * For a non-fatal error return a warning code. If there are no warnings * then 0 is returned. */ -ASC_INITFUNC( -STATIC int, +STATIC int __init AdvInitGetConfig(ADV_DVC_VAR *asc_dvc) -) { ushort warn_code; AdvPortAddr iop_base; @@ -16845,10 +16472,8 @@ * * Note: Chip is stopped on entry. */ -ASC_INITFUNC( -STATIC int, +STATIC int __init AdvInitFrom3550EEP(ADV_DVC_VAR *asc_dvc) -) { AdvPortAddr iop_base; ushort warn_code; @@ -17019,10 +16644,8 @@ * * Note: Chip is stopped on entry. */ -ASC_INITFUNC( -STATIC int, +STATIC int __init AdvInitFrom38C0800EEP(ADV_DVC_VAR *asc_dvc) -) { AdvPortAddr iop_base; ushort warn_code; @@ -17254,10 +16877,8 @@ * * Note: Chip is stopped on entry. */ -ASC_INITFUNC( -STATIC int, +STATIC int __init AdvInitFrom38C1600EEP(ADV_DVC_VAR *asc_dvc) -) { AdvPortAddr iop_base; ushort warn_code; @@ -17522,10 +17143,8 @@ * * Return a checksum based on the EEPROM configuration read. */ -ASC_INITFUNC( -STATIC ushort, +STATIC ushort __init AdvGet3550EEPConfig(AdvPortAddr iop_base, ADVEEP_3550_CONFIG *cfg_buf) -) { ushort wval, chksum; ushort *wbuf; @@ -17570,11 +17189,9 @@ * * Return a checksum based on the EEPROM configuration read. */ -ASC_INITFUNC( -STATIC ushort, +STATIC ushort __init AdvGet38C0800EEPConfig(AdvPortAddr iop_base, ADVEEP_38C0800_CONFIG *cfg_buf) -) { ushort wval, chksum; ushort *wbuf; @@ -17619,11 +17236,9 @@ * * Return a checksum based on the EEPROM configuration read. */ -ASC_INITFUNC( -STATIC ushort, +STATIC ushort __init AdvGet38C1600EEPConfig(AdvPortAddr iop_base, ADVEEP_38C1600_CONFIG *cfg_buf) -) { ushort wval, chksum; ushort *wbuf; @@ -17666,10 +17281,8 @@ /* * Read the EEPROM from specified location */ -ASC_INITFUNC( -STATIC ushort, +STATIC ushort __init AdvReadEEPWord(AdvPortAddr iop_base, int eep_word_addr) -) { AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_READ | eep_word_addr); @@ -17680,10 +17293,8 @@ /* * Wait for EEPROM command to complete */ -ASC_INITFUNC( -STATIC void, +STATIC void __init AdvWaitEEPCmd(AdvPortAddr iop_base) -) { int eep_delay_ms; @@ -18335,7 +17946,7 @@ * the device, otherwise may erroneously set *_able bits. */ if (scsiq->done_status == QD_NO_ERROR && - scsiq->cdb[0] == SCSICMD_Inquiry && + scsiq->cdb[0] == INQUIRY && scsiq->target_lun == 0 && (scsiq->cdb[1] & ADV_INQ_RTN_VPD_AND_CMDDT) == ADV_INQ_RTN_STD_INQUIRY_DATA)