From: Mark Overmeer <Mark@Overmeer.net>
To: "Salyzyn, Mark" <mark_salyzyn@adaptec.com>
Cc: linux-scsi@vger.kernel.org
Subject: Re: Adaptec 2810SA problems
Date: Sat, 26 Jun 2004 13:23:28 +0200 [thread overview]
Message-ID: <20040626132327.B31119@speeltuin.ATComputing.nl> (raw)
In-Reply-To: <547AF3BD0F3F0B4CBDC379BAC7E4189FF1D40D@otce2k03.adaptec.com>; from mark_salyzyn@adaptec.com on Fri, Jun 25, 2004 at 08:59:06AM -0400
* Salyzyn, Mark (mark_salyzyn@adaptec.com) [040625 14:52]:
> Your best bet to hone in on the problem is to contact Adaptec Technical
> support, make sure you have your products TSID handy.
I will try that, (but usually as last resort)
> The appears dead message is a result of a failure in the adapter
> identified by performing a sequence of health checks. Finer resolution
> of this failure mode is available in the Adaptec release for this
> driver.
Is there a 2.6.7 driver of Adaptec itself? I thought they only had their
own 2.4.* versions...
> The card's firmware can be updated by using the native Linux cli tool
> supplied with the card.
It's not in the description of the driver software. That always worries
me a little.... The docs are rather unsatisfactory...
--
Thanks for the answer,
MarkOv
------------------------------------------------------------------------
drs Mark A.C.J. Overmeer MARKOV Solutions
Mark@Overmeer.net solutions@overmeer.net
http://Mark.Overmeer.net http://solutions.overmeer.net
next prev parent reply other threads:[~2004-06-26 11:30 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-06-25 12:59 Adaptec 2810SA problems Salyzyn, Mark
2004-06-26 11:23 ` Mark Overmeer [this message]
-- strict thread matches above, loose matches on Subject: below --
2004-06-25 8:47 Mark Overmeer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040626132327.B31119@speeltuin.ATComputing.nl \
--to=mark@overmeer.net \
--cc=linux-scsi@vger.kernel.org \
--cc=mark_salyzyn@adaptec.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).