public inbox for linux-scsi@vger.kernel.org
 help / color / mirror / Atom feed
From: Matthew Wilcox <willy@debian.org>
To: "Vladimir G. Ivanovic" <vladimir@acm.org>
Cc: Mike Anderson <andmike@us.ibm.com>, Olaf Hering <olh@suse.de>,
	James Bottomley <James.Bottomley@SteelEye.com>,
	willy@debian.org, SCSI Mailing List <linux-scsi@vger.kernel.org>,
	Anton Blanchard <anton@samba.org>
Subject: Re: [PATCH] fix sym2 negotiation
Date: Tue, 24 Aug 2004 21:50:39 +0100	[thread overview]
Message-ID: <20040824205039.GC16196@parcelfarce.linux.theplanet.co.uk> (raw)
In-Reply-To: <200408242048.i7OKmtRQ002174@bach.leonora.org>

On Tue, Aug 24, 2004 at 01:48:55PM -0700, Vladimir G. Ivanovic wrote:
> I don't know what an ACARD is, but I have similar issues when I boot my
> SMP system (ASUS CUV4X-DLS).
> 
>    kernel: VFS: Mounted root (ext2 filesystem).
>    kernel: SCSI subsystem initialized
>    kernel: ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 177
>    kernel: sym0: <1010-33> rev 0x1 at pci 0000:00:08.0 irq 177
>    kernel: sym0: using 64 bit DMA addressing
>    kernel: sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
>    kernel: sym0: open drain IRQ line driver, using on-chip SRAM
>    kernel: sym0: using LOAD/STORE-based firmware.
>    kernel: sym0: handling phase mismatch from SCRIPTS.
>    kernel: sym0: SCSI BUS has been reset.
>    kernel: scsi0 : sym-2.1.18j
>    kernel:   Vendor: QUANTUM   Model: ATLAS10K3_18_WLS  Rev: 020K
>    kernel:   Type:   Direct-Access                      ANSI SCSI revision: 03
>    kernel: sym0:6:0: tagged command queuing enabled, command queue depth 16.
>    kernel: scsi(0:0:6:0): Beginning Domain Validation
>    kernel: sym0:6: wide asynchronous.
>    kernel: sym0:6: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 62)
>    kernel: scsi(0:0:6:0): Ending Domain Validation
>    kernel: SCSI device sda: 35916548 512-byte hdwr sectors (18389 MB)
>    kernel: SCSI device sda: drive cache: write back
>    kernel:  sda: sda1 sda2 sda3 sda4
>    kernel: Attached scsi disk sda at scsi0, channel 0, id 6, lun 0
>    kernel: ACPI: PCI interrupt 0000:00:08.1[B] -> GSI 16 (level, low) -> IRQ 185

Erm, I see no sign of any problem in this log.  You negotiated to 160MB/s.

-- 
"Next the statesmen will invent cheap lies, putting the blame upon 
the nation that is attacked, and every man will be glad of those
conscience-soothing falsities, and will diligently study them, and refuse
to examine any refutations of them; and thus he will by and by convince 
himself that the war is just, and will thank God for the better sleep 
he enjoys after this process of grotesque self-deception." -- Mark Twain

  reply	other threads:[~2004-08-24 20:50 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-08-21 18:37 [PATCH] fix sym2 negotiation James Bottomley
2004-08-22 17:32 ` Matthias Andree
2004-08-22 18:03   ` James Bottomley
2004-08-24 13:29 ` Olaf Hering
2004-08-24 20:39   ` Mike Anderson
2004-08-24 20:48     ` Vladimir G. Ivanovic
2004-08-24 20:50       ` Matthew Wilcox [this message]
2004-08-24 21:39         ` Vladimir G. Ivanovic
2004-08-24 22:12           ` Matthew Wilcox
2004-08-25  0:48             ` Vladimir G. Ivanovic
2004-08-24 20:51     ` Olaf Hering
2004-08-25  6:57       ` Mike Anderson
2004-08-25  9:25         ` Olaf Hering
2004-08-25 11:58           ` Matthew Wilcox
2004-08-25 12:09             ` Olaf Hering
2004-08-25 12:11             ` Anton Blanchard
2004-08-25 13:43               ` Doug Maxey
2004-08-25 13:23             ` James Bottomley
2004-08-25 19:13               ` Mike Anderson
2004-08-27 16:54 ` Kai Makisara

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20040824205039.GC16196@parcelfarce.linux.theplanet.co.uk \
    --to=willy@debian.org \
    --cc=James.Bottomley@SteelEye.com \
    --cc=andmike@us.ibm.com \
    --cc=anton@samba.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=olh@suse.de \
    --cc=vladimir@acm.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox