[PATCH 2.6.9-rc1] add blacklist attribute indicating no ULD attach

[Jeremy Higdon <jeremy@sgi.com>]

Add blacklist attribute to disable ULD attachment to a lun, and use
that attribute for SGI-branded Engenio UTM luns.

This incorporates input on braces :-)

Signed-off-by: Jeremy Higdon  <jeremy@sgi.com>

diff -Nru a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c
--- a/drivers/scsi/scsi_devinfo.c	2004-09-15 14:21:22 -07:00
+++ b/drivers/scsi/scsi_devinfo.c	2004-09-15 14:21:22 -07:00
@@ -182,6 +182,7 @@
 	{"SGI", "RAID3", "*", BLIST_SPARSELUN},
 	{"SGI", "RAID5", "*", BLIST_SPARSELUN},
 	{"SGI", "TP9100", "*", BLIST_REPORTLUN2},
+	{"SGI", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},
 	{"SMSC", "USB 2 HS-CF", NULL, BLIST_SPARSELUN},
 	{"SONY", "CD-ROM CDU-8001", NULL, BLIST_BORKEN},
 	{"SONY", "TSL", NULL, BLIST_FORCELUN},		/* DDS3 & DDS4 autoloaders */
diff -Nru a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
--- a/drivers/scsi/scsi_scan.c	2004-09-15 14:21:22 -07:00
+++ b/drivers/scsi/scsi_scan.c	2004-09-15 14:21:22 -07:00
@@ -531,7 +531,8 @@
 		 */
 		inq_result[0] = TYPE_ROM;
 		inq_result[1] |= 0x80;	/* removable */
-	}
+	} else if (*bflags & BLIST_NO_ULD_ATTACH)
+		sdev->no_uld_attach = 1;
 
 	switch (sdev->type = (inq_result[0] & 0x1f)) {
 	case TYPE_TAPE:
diff -Nru a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
--- a/drivers/scsi/scsi_sysfs.c	2004-09-15 14:21:22 -07:00
+++ b/drivers/scsi/scsi_sysfs.c	2004-09-15 14:21:22 -07:00
@@ -183,6 +183,8 @@
 static int scsi_bus_match(struct device *dev, struct device_driver *gendrv)
 {
 	struct scsi_device *sdp = to_scsi_device(dev);
+	if (sdp->no_uld_attach)
+		return 0;
 	return (sdp->inq_periph_qual == SCSI_INQ_PQ_CON)? 1: 0;
 }
 
diff -Nru a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
--- a/include/scsi/scsi_device.h	2004-09-15 14:21:22 -07:00
+++ b/include/scsi/scsi_device.h	2004-09-15 14:21:22 -07:00
@@ -106,6 +106,7 @@
 	unsigned use_192_bytes_for_3f:1; /* ask for 192 bytes from page 0x3f */
 	unsigned no_start_on_add:1;	/* do not issue start on add */
 	unsigned allow_restart:1; /* issue START_UNIT in error handler */
+	unsigned no_uld_attach:1; /* disable connecting to upper level drivers */
 
 	unsigned int device_blocked;	/* Device returned QUEUE_FULL. */
 
diff -Nru a/include/scsi/scsi_devinfo.h b/include/scsi/scsi_devinfo.h
--- a/include/scsi/scsi_devinfo.h	2004-09-15 14:21:22 -07:00
+++ b/include/scsi/scsi_devinfo.h	2004-09-15 14:21:22 -07:00
@@ -25,4 +25,5 @@
  					   (if HBA supports more than 8 LUNs) */
 #define BLIST_NOREPORTLUN	0x40000	/* don't try REPORT_LUNS scan (SCSI-3 devs) */
 #define BLIST_NOT_LOCKABLE	0x80000	/* don't use PREVENT-ALLOW commands */
+#define BLIST_NO_ULD_ATTACH	0x100000 /* device is actually for RAID config */
 #endif