From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Berder Subject: Problem with megaraid and PERC3/dc on a poweredge 6450 Date: Wed, 5 Jan 2005 17:50:01 +0100 Message-ID: <20050105175001.35e6d09e@gibson> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="Multipart=_Wed__5_Jan_2005_17_50_01_+0100_Y4pCvrFCHROfMem+" Return-path: Received: from postcard.dih.oleane.net ([213.56.0.19]:35592 "EHLO postcard.dih.oleane.net") by vger.kernel.org with ESMTP id S262481AbVAEQt5 (ORCPT ); Wed, 5 Jan 2005 11:49:57 -0500 Received: from VirusWall (localhost [127.0.0.1]) by postcard.dih.oleane.net with ESMTP id j05Gnuo8008085 for ; Wed, 5 Jan 2005 17:49:56 +0100 Received: from gibson (gibson.dih.oleane.net [213.56.0.209]) by postcard.dih.oleane.net (8.12.2.0918/8.12.2/8.12-FT) with SMTP id j05GnqXf008068 for ; Wed, 5 Jan 2005 17:49:52 +0100 Sender: linux-scsi-owner@vger.kernel.org List-Id: linux-scsi@vger.kernel.org To: linux-scsi@vger.kernel.org This is a multi-part message in MIME format. --Multipart=_Wed__5_Jan_2005_17_50_01_+0100_Y4pCvrFCHROfMem+ Content-Type: text/plain; charset=ISO-8859-15 Content-Transfer-Encoding: quoted-printable Hi all, I got some strange problems with the megaraid driver under linux. The box I'm running is a dell poweredge 6450 with a PERC3/DC raid controller and Adaptec AIC-7899P controllers. I got 2x36GB (RAID1) scsi hdd inside the box an 13x36GB (RAID5) in a dell hdd bay, debian sarge is the system. I got various problems : - I found a debian install iso on the linux.dell;com site to install the box. It's a 2.4.28 kernel, and the box is working fine with this kernel. When I switch to a 2.4.28 kernel based on the configuration file provided with the install kernel and removing some useless things, adding netfilter, the box boots but hdds got really poor performances : brucelee:~/src# hdparm -t -T /dev/sda /dev/sdb /dev/sda: Timing cached reads: 724 MB in 2.00 seconds =3D 362.00 MB/sec Timing buffered disk reads: 12 MB in 3.56 seconds =3D 3.37 MB/sec /dev/sdb: Timing cached reads: 668 MB in 2.00 seconds =3D 334.00 MB/sec Timing buffered disk reads: 12 MB in 3.19 seconds =3D 3.76 MB/sec - When I compile a 2.6.10 kernel, I got 2 problems, first when I use the megaraid legacy I get a kernel panic during boot with something about "data cache" before. When I use the new megaraid (megaraid_mm and megaraid_mbox) during the kernel scsi probe it says that some command hangs and timeouts, then it does a lot of timeouts... lspci and dmesg attached --=20 #=3D- Stefan Berder tel : 6 14 80 -=3D# #=3D- Ing=E9nieur syst=E8me et r=E9seau 01 53 95 14 80 -=3D# #=3D- TRANSPAC / DO-DAE-ADMG mail : sbe@oleane.net -=3D# #=3D- /(bb|[^b]{2})/ stefan.berder@francetelecom.com -=3D# --Multipart=_Wed__5_Jan_2005_17_50_01_+0100_Y4pCvrFCHROfMem+ Content-Type: text/plain; name="lspci.txt" Content-Disposition: attachment; filename="lspci.txt" Content-Transfer-Encoding: 7bit brucelee:~/src# lspci -vx 0000:00:00.0 Host bridge: ServerWorks CNB20HE Host Bridge (rev 21) Flags: fast devsel 00: 66 11 08 00 00 00 00 00 21 00 00 06 08 20 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000:00:00.1 Host bridge: ServerWorks CNB20HE Host Bridge (rev 01) Flags: bus master, medium devsel, latency 32 00: 66 11 08 00 47 01 00 22 01 00 00 06 08 20 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00 0000:00:00.2 Host bridge: ServerWorks CNB20HE Host Bridge Flags: medium devsel 00: 66 11 06 00 42 01 00 22 00 00 00 06 08 20 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000:00:00.3 Host bridge: ServerWorks CNB20HE Host Bridge Flags: medium devsel 00: 66 11 06 00 42 01 00 22 00 00 00 06 08 20 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000:00:04.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC (rev 7a) (prog-if 00 [VGA]) Subsystem: Dell: Unknown device 00a2 Flags: bus master, VGA palette snoop, stepping, medium devsel, latency 32 Memory at fc000000 (32-bit, prefetchable) [size=16M] I/O ports at ec00 [size=256] Memory at fbeff000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at [disabled] [size=128K] Capabilities: [5c] Power Management version 1 00: 02 10 59 47 a7 00 90 02 7a 00 00 03 08 20 00 00 10: 08 00 00 fc 01 ec 00 00 00 f0 ef fb 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 a2 00 30: 00 00 00 00 5c 00 00 00 00 00 00 00 ff 00 08 00 0000:00:05.0 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01) Subsystem: Dell: Unknown device 00a2 Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17 BIST result: 00 I/O ports at e800 [disabled] [size=256] Memory at fbefe000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at fbf00000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 00: 05 90 cf 00 16 01 b0 02 01 00 00 01 08 20 80 80 10: 01 e8 00 00 04 e0 ef fb 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 a2 00 30: 00 00 f0 fb dc 00 00 00 00 00 00 00 0b 01 28 19 0000:00:05.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01) Subsystem: Dell: Unknown device 00a2 Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18 BIST result: 00 I/O ports at e400 [disabled] [size=256] Memory at fbefd000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at fbf00000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 00: 05 90 cf 00 16 01 b0 02 01 00 00 01 08 20 80 80 10: 01 e4 00 00 04 d0 ef fb 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 a2 00 30: 00 00 f0 fb dc 00 00 00 00 00 00 00 0a 02 28 19 0000:00:07.0 System peripheral: American Megatrends Inc. MegaRAC (rev 04) Subsystem: American Megatrends Inc. Dell Remote Assistant Card 2 Flags: bus master, medium devsel, latency 32, IRQ 21 BIST result: 00 I/O ports at e080 [size=128] Memory at fbefc000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at fbf00000 [disabled] [size=16K] 00: 1e 10 63 90 17 01 00 02 04 00 80 08 08 20 00 80 10: 81 e0 00 00 00 c0 ef fb 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 1e 10 67 07 30: 00 00 f0 fb 00 00 00 00 00 00 00 00 05 01 00 00 0000:00:08.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08) Subsystem: Dell PowerEdge 2550 Flags: bus master, medium devsel, latency 32, IRQ 26 Memory at fbefb000 (32-bit, non-prefetchable) [size=4K] I/O ports at e040 [size=64] Memory at fbd00000 (32-bit, non-prefetchable) [size=1M] Capabilities: [dc] Power Management version 2 00: 86 80 29 12 17 01 90 02 08 00 00 02 08 20 00 00 10: 00 b0 ef fb 41 e0 00 00 00 00 d0 fb 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 9b 00 30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 08 38 0000:00:0f.0 ISA bridge: ServerWorks OSB4 South Bridge (rev 50) Subsystem: ServerWorks OSB4 South Bridge Flags: bus master, medium devsel, latency 0 00: 66 11 00 02 07 00 00 02 50 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 66 11 00 02 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000:00:0f.1 IDE interface: ServerWorks OSB4 IDE Controller (prog-if 8a [Master SecP PriP]) Flags: bus master, medium devsel, latency 64 I/O ports at 08b0 [size=16] 00: 66 11 11 02 05 00 00 02 00 8a 01 01 00 40 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: b1 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000:00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev 04) (prog-if 10 [OHCI]) Subsystem: ServerWorks OSB4/CSB5 OHCI USB Controller Flags: bus master, medium devsel, latency 32, IRQ 31 Memory at fbefa000 (32-bit, non-prefetchable) [size=4K] 00: 66 11 20 02 17 01 80 02 04 10 03 0c 08 20 80 00 10: 00 a0 ef fb 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 66 11 20 02 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 50 0000:03:09.0 PCI bridge: Digital Equipment Corporation DECchip 21154 (rev 05) (prog-if 00 [Normal decode]) Flags: bus master, 66MHz, medium devsel, latency 32 Bus: primary=03, secondary=04, subordinate=05, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: faa00000-facfffff Prefetchable memory behind bridge: 00000000f0000000-00000000f7f00000 Capabilities: [dc] Power Management version 1 00: 11 10 26 00 07 01 b0 02 05 00 04 06 00 20 01 00 10: 00 00 00 00 00 00 00 00 03 04 05 20 c1 c1 80 22 20: a0 fa c0 fa 01 f0 f1 f7 00 00 00 00 00 00 00 00 30: 00 00 00 00 dc 00 00 00 00 00 00 00 00 00 06 00 0000:03:0a.0 PCI bridge: Intel Corp. 21154 PCI-to-PCI Bridge (prog-if 00 [Normal decode]) Flags: bus master, 66MHz, medium devsel, latency 32 Bus: primary=03, secondary=06, subordinate=07, sec-latency=32 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fa700000-fa9fffff Prefetchable memory behind bridge: 00000000e8000000-00000000eff00000 Capabilities: [dc] Power Management version 1 00: 86 80 54 b1 07 01 b0 02 00 00 04 06 00 20 01 00 10: 00 00 00 00 00 00 00 00 03 06 07 20 b1 b1 80 22 20: 70 fa 90 fa 01 e8 f1 ef 00 00 00 00 00 00 00 00 30: 00 00 00 00 dc 00 00 00 00 00 00 00 00 00 06 00 0000:03:0b.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08) Subsystem: Intel Corp. EtherExpress PRO/100+ Server Adapter (PILA8470B) Flags: bus master, medium devsel, latency 32, IRQ 25 Memory at fa5ff000 (32-bit, non-prefetchable) [size=4K] I/O ports at acc0 [size=64] Memory at fa400000 (32-bit, non-prefetchable) [size=1M] Capabilities: [dc] Power Management version 2 00: 86 80 29 12 17 01 90 02 08 00 00 02 08 20 00 00 10: 00 f0 5f fa c1 ac 00 00 00 00 40 fa 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 0c 10 30: 00 00 00 00 dc 00 00 00 00 00 00 00 05 01 08 38 0000:04:00.0 PCI bridge: Digital Equipment Corporation DECchip 21154 (rev 05) (prog-if 00 [Normal decode]) Flags: bus master, medium devsel, latency 32 Bus: primary=04, secondary=05, subordinate=05, sec-latency=32 Memory behind bridge: fac00000-facfffff Prefetchable memory behind bridge: 00000000f0000000-00000000f7f00000 Capabilities: [dc] Power Management version 1 00: 11 10 26 00 07 01 90 02 05 00 04 06 00 20 01 00 10: 00 00 00 00 00 00 00 00 04 05 05 20 f1 01 80 22 20: c0 fa c0 fa 01 f0 f1 f7 00 00 00 00 00 00 00 00 30: 00 00 00 00 dc 00 00 00 00 00 00 00 00 00 06 00 0000:04:01.0 SCSI storage controller: QLogic Corp. ISP12160 Dual Channel Ultra3 SCSI Processor (rev 06) Subsystem: American Megatrends Inc. QLA12160 on AMI MegaRAID Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 27 I/O ports at cc00 [size=256] Memory at faaff000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at fab00000 [disabled] [size=128K] Capabilities: [44] Power Management version 1 00: 77 10 16 12 17 01 b0 02 06 00 00 01 08 20 00 00 10: 01 cc 00 00 00 f0 af fa 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 1e 10 93 84 30: 00 00 b0 fa 44 00 00 00 00 00 00 00 0b 01 40 00 0000:05:00.0 RAID bus controller: American Megatrends Inc. MegaRAID (rev 20) Subsystem: Dell PowerEdge RAID Controller 3/DC Flags: bus master, medium devsel, latency 32, IRQ 23 Memory at f0000000 (32-bit, prefetchable) [size=128M] Expansion ROM at fac00000 [disabled] [size=32K] Capabilities: [80] Power Management version 2 00: 1e 10 60 19 16 01 90 02 20 00 04 01 08 20 00 00 10: 08 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 93 04 30: 00 00 c0 fa 80 00 00 00 00 00 00 00 0a 01 00 00 0000:06:00.0 PCI bridge: Intel Corp. 21154 PCI-to-PCI Bridge (prog-if 00 [Normal decode]) Flags: bus master, medium devsel, latency 32 Bus: primary=06, secondary=07, subordinate=07, sec-latency=32 Memory behind bridge: fa900000-fa9fffff Prefetchable memory behind bridge: 00000000e8000000-00000000eff00000 Capabilities: [dc] Power Management version 1 00: 86 80 54 b1 07 01 90 02 00 00 04 06 00 20 01 00 10: 00 00 00 00 00 00 00 00 06 07 07 20 f1 01 80 22 20: 90 fa 90 fa 01 e8 f1 ef 00 00 00 00 00 00 00 00 30: 00 00 00 00 dc 00 00 00 00 00 00 00 00 00 06 00 0000:06:01.0 SCSI storage controller: QLogic Corp. ISP12160 Dual Channel Ultra3 SCSI Processor (rev 06) Subsystem: American Megatrends Inc. QLA12160 on AMI MegaRAID Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 28 I/O ports at bc00 [size=256] Memory at fa7ff000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at fa800000 [disabled] [size=128K] Capabilities: [44] Power Management version 1 00: 77 10 16 12 17 01 b0 02 06 00 00 01 08 20 00 00 10: 01 bc 00 00 00 f0 7f fa 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 1e 10 93 84 30: 00 00 80 fa 44 00 00 00 00 00 00 00 05 01 40 00 0000:07:00.0 RAID bus controller: American Megatrends Inc. MegaRAID (rev 20) Subsystem: Dell PowerEdge RAID Controller 3/DC Flags: bus master, medium devsel, latency 32, IRQ 24 Memory at e8000000 (32-bit, prefetchable) [size=128M] Expansion ROM at fa900000 [disabled] [size=32K] Capabilities: [80] Power Management version 2 00: 1e 10 60 19 16 01 90 02 20 00 04 01 08 20 00 00 10: 08 00 00 e8 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 93 04 30: 00 00 90 fa 80 00 00 00 00 00 00 00 0b 01 00 00 --Multipart=_Wed__5_Jan_2005_17_50_01_+0100_Y4pCvrFCHROfMem+ Content-Type: text/plain; name="dmesg.txt" Content-Disposition: attachment; filename="dmesg.txt" Content-Transfer-Encoding: 7bit brucelee:~/src# dmesg Linux version 2.4.28-bruce2.4 (root@brucelee) (gcc version 3.3.4 (Debian 1:3.3.4-13)) #1 SMP Wed Jan 5 13:39:01 CET 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 000000003fffe000 (usable) BIOS-e820: 000000003fffe000 - 0000000040000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000fe710 hm, page 000fe000 reserved twice. hm, page 000ff000 reserved twice. hm, page 000f0000 reserved twice. On node 0 totalpages: 262142 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 32766 pages. ACPI: RSDP (v000 DELL ) @ 0x000fdcb0 ACPI: RSDT (v001 DELL PE6450 0x00000002 MSFT 0x0100000a) @ 0x000fdcc4 ACPI: FADT (v001 DELL PE6450 0x00000002 MSFT 0x0100000a) @ 0x000fdcf0 ACPI: MADT (v001 DELL PE6450 0x00000002 MSFT 0x0100000a) @ 0x000fdd64 ACPI: DSDT (v001 DELL PE6450 0x00000002 MSFT 0x0100000a) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 Pentium(tm) Pro APIC version 17 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled) Processor #0 Pentium(tm) Pro APIC version 17 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: DELL Product ID: POWEREDGE A2 APIC at: 0xFEE00000 I/O APIC #2 Version 17 at 0xFEC00000. I/O APIC #3 Version 17 at 0xFEC01000. Enabling APIC mode: Flat. Using 2 I/O APICs Processors: 2 Kernel command line: auto BOOT_IMAGE=Linux ro root=802 Initializing CPU#0 Detected 699.336 MHz processor. Console: colour VGA+ 80x50 Calibrating delay loop... 1395.91 BogoMIPS Memory: 1032112k/1048568k available (2290k kernel code, 16072k reserved, 758k data, 132k init, 131064k highmem) Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode cache hash table entries: 65536 (order: 7, 524288 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 65536 (order: 6, 262144 bytes) Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 1024K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 1024K Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU0: Intel Pentium III (Cascades) stepping 01 per-CPU timeslice cutoff: 2923.06 usecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000040 ESR value after enabling vector: 00000000 Booting processor 1/0 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 1395.91 BogoMIPS CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 1024K Intel machine check reporting enabled on CPU#1. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU1: Intel Pentium III (Cascades) stepping 01 Total of 2 processors activated (2791.83 BogoMIPS). ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. Setting 3 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 3 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-2, 2-5, 2-10, 2-11, 2-13 not connected. ..TIMER: vector=0x31 pin1=-1 pin2=0 ...trying to set up timer (IRQ0) through the 8259A ... ..... (found pin 0) ...works. number of MP IRQ sources: 48. number of IO-APIC #2 registers: 16. number of IO-APIC #3 registers: 16. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 003 03 0 0 0 0 0 1 1 31 01 003 03 0 0 0 0 0 1 1 39 02 000 00 1 0 0 0 0 0 0 00 03 003 03 0 0 0 0 0 1 1 41 04 003 03 0 0 0 0 0 1 1 49 05 000 00 1 0 0 0 0 0 0 00 06 003 03 0 0 0 0 0 1 1 51 07 003 03 0 0 0 0 0 1 1 59 08 003 03 0 0 0 0 0 1 1 61 09 003 03 0 0 0 0 0 1 1 69 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 003 03 0 0 0 0 0 1 1 71 0d 000 00 1 0 0 0 0 0 0 00 0e 003 03 0 0 0 0 0 1 1 79 0f 003 03 0 0 0 0 0 1 1 81 IO APIC #3...... .... register #00: 03000000 ....... : physical APIC id: 03 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 0D000000 ....... : arbitration: 0D .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 003 03 1 1 0 1 0 1 1 89 01 003 03 1 1 0 1 0 1 1 91 02 003 03 1 1 0 1 0 1 1 99 03 003 03 1 1 0 1 0 1 1 A1 04 003 03 1 1 0 1 0 1 1 A9 05 003 03 1 1 0 1 0 1 1 B1 06 003 03 1 1 0 1 0 1 1 B9 07 003 03 1 1 0 1 0 1 1 C1 08 003 03 1 1 0 1 0 1 1 C9 09 003 03 1 1 0 1 0 1 1 D1 0a 003 03 1 1 0 1 0 1 1 D9 0b 003 03 1 1 0 1 0 1 1 E1 0c 003 03 1 1 0 1 0 1 1 E9 0d 003 03 1 1 0 1 0 1 1 32 0e 003 03 1 1 0 1 0 1 1 3A 0f 003 03 1 1 0 1 0 1 1 42 IRQ to pin mappings: IRQ0 -> 0:0 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ12 -> 0:12 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 1:0 IRQ17 -> 1:1 IRQ18 -> 1:2 IRQ19 -> 1:3 IRQ20 -> 1:4 IRQ21 -> 1:5 IRQ22 -> 1:6 IRQ23 -> 1:7 IRQ24 -> 1:8 IRQ25 -> 1:9 IRQ26 -> 1:10 IRQ27 -> 1:11 IRQ28 -> 1:12 IRQ29 -> 1:13 IRQ30 -> 1:14 IRQ31 -> 1:15 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 699.2856 MHz. ..... host bus clock speed is 99.8976 MHz. cpu: 0, clocks: 998976, slice: 332992 CPU0 cpu: 1, clocks: 998976, slice: 332992 CPU1 checking TSC synchronization across CPUs: passed. Waiting on wait_init_idle (map = 0x2) All processors have done init_idle PCI: PCI BIOS revision 2.10 entry at 0xfc7ee, last bus=16 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Discovered primary peer bus 03 [IRQ] PCI: Discovered primary peer bus 10 [IRQ] PCI: Using IRQ router ServerWorks [1166/0200] at 00:0f.0 PCI->APIC IRQ transform: (B0,I5,P0) -> 17 PCI->APIC IRQ transform: (B0,I5,P1) -> 18 PCI->APIC IRQ transform: (B0,I7,P0) -> 21 PCI->APIC IRQ transform: (B0,I8,P0) -> 26 PCI->APIC IRQ transform: (B0,I15,P0) -> 31 PCI->APIC IRQ transform: (B3,I11,P0) -> 25 PCI->APIC IRQ transform: (B4,I1,P0) -> 27 PCI->APIC IRQ transform: (B5,I0,P0) -> 23 PCI->APIC IRQ transform: (B6,I1,P0) -> 28 PCI->APIC IRQ transform: (B7,I0,P0) -> 24 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd allocated 32 pages and 32 bhs reserved for the highmem bounces Journalled Block Device driver loaded Installing knfsd (copyright (C) 1996 okir@monad.swb.de). pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) HP CISS Driver (v 2.4.52) Intel(R) PRO/100 Network Driver - version 2.3.43-k1 Copyright (c) 2004 Intel Corporation e100: selftest OK. e100: eth0: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled cpu cycle saver enabled e100: selftest OK. e100: eth1: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled cpu cycle saver enabled Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 941M agpgart: no supported devices found. [drm] Initialized tdfx 1.0.0 20010216 on minor 0 [drm] Initialized radeon 1.7.0 20020828 on minor 1 [drm:drm_init] *ERROR* Cannot initialize the agpgart module. Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SvrWks OSB4: IDE controller at PCI slot 00:0f.1 SvrWks OSB4: chipset revision 0 SvrWks OSB4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x08b0-0x08b7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x08b8-0x08bf, BIOS settings: hdc:pio, hdd:pio hda: TEAC CD-ROM CD-224E, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: attached ide-cdrom driver. hda: ATAPI 24X CD-ROM drive, 128kB Cache, (U)DMA Uniform CD-ROM driver Revision: 3.12 SCSI subsystem driver Revision: 1.00 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs megaraid: v2.10.3 (Release Date: Thu Apr 8 16:16:05 EDT 2004) megaraid: found 0x101e:0x1960:bus 5:slot 0:func 0 scsi2:Found MegaRAID controller at 0xf8808000, IRQ:23 megaraid: [1.57:3.13] detected 2 logical drives. megaraid: channel[0] is raid. megaraid: channel[1] is raid. megaraid: found 0x101e:0x1960:bus 7:slot 0:func 0 scsi3:Found MegaRAID controller at 0xf880a000, IRQ:24 megaraid: [161J:3.17] detected 0 logical drives. megaraid: channel[0] is raid. megaraid: channel[1] is raid. megaraid: Cluster driver, initiator id:14 scsi2 : LSI Logic MegaRAID 1.57 254 commands 16 targs 5 chans 7 luns scsi3 : LSI Logic MegaRAID 161J 254 commands 16 targs 5 chans 7 luns scsi2: scanning scsi channel 0 for logical drives. Vendor: MegaRAID Model: LD0 RAID1 34678R Rev: 1.57 Type: Direct-Access ANSI SCSI revision: 02 Vendor: MegaRAID Model: LD1 RAID5 46780R Rev: 1.57 Type: Direct-Access ANSI SCSI revision: 02 scsi2: scanning scsi channel 1 for logical drives. scsi2: scanning scsi channel 2 for logical drives. scsi2: scanning scsi channel 4 [P0] for physical devices. Vendor: DELL Model: 1x4 U2W SCSI BP Rev: 1.27 Type: Processor ANSI SCSI revision: 02 scsi2: scanning scsi channel 5 [P1] for physical devices. Vendor: Dell Model: 12 BAY U2W CU Rev: 0209 Type: Processor ANSI SCSI revision: 03 Vendor: Dell Model: 12 BAY U2W CU Rev: 0209 Type: Processor ANSI SCSI revision: 03 Vendor: Dell Model: 12 BAY U2W CU Rev: 0209 Type: Processor ANSI SCSI revision: 03 Vendor: Dell Model: 12 BAY U2W CU Rev: 0209 Type: Processor ANSI SCSI revision: 03 Vendor: Dell Model: 12 BAY U2W CU Rev: 0209 Type: Processor ANSI SCSI revision: 03 Vendor: Dell Model: 12 BAY U2W CU Rev: 0209 Type: Processor ANSI SCSI revision: 03 Vendor: Dell Model: 12 BAY U2W CU Rev: 0209 Type: Processor ANSI SCSI revision: 03 scsi3: scanning scsi channel 0 for logical drives. scsi3: scanning scsi channel 1 for logical drives. scsi3: scanning scsi channel 2 for logical drives. scsi3: scanning scsi channel 4 [P0] for physical devices. scsi3: scanning scsi channel 5 [P1] for physical devices. Attached scsi disk sda at scsi2, channel 0, id 0, lun 0 Attached scsi disk sdb at scsi2, channel 0, id 1, lun 0 SCSI device sda: 71020544 512-byte hdwr sectors (36363 MB) Partition check: sda: sda1 sda2 SCSI device sdb: 710205440 512-byte hdwr sectors (363625 MB) sdb: sdb1 es1371: version v0.32 time 13:43:04 Jan 5 2005 Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] usb.c: registered new driver usbdevfs usb.c: registered new driver hub host/usb-ohci.c: USB OHCI at membase 0xf880c000, IRQ 31 host/usb-ohci.c: usb-00:0f.2, ServerWorks OSB4/CSB5 OHCI USB Controller usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) ip_conntrack version 2.1 (8191 buckets, 65528 max) - 152 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller ds: no socket drivers loaded! kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 132k freed Adding Swap: 1000424k swap-space (priority -1) EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,2), internal journal hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hda: drive_cmd: error=0x04Aborted Command e100: eth0 NIC Link is Up 100 Mbps Full duplex --Multipart=_Wed__5_Jan_2005_17_50_01_+0100_Y4pCvrFCHROfMem+--