From: domen@coderock.org
To: James.Bottomley@SteelEye.com
Cc: linux-scsi@vger.kernel.org, domen@coderock.org
Subject: [patch 6/7] delete unused file
Date: Wed, 12 Jan 2005 00:23:03 +0100 [thread overview]
Message-ID: <20050111232303.E80BD1F22A@trashy.coderock.org> (raw)
Remove nowhere referenced file. (egrep "filename\." didn't find anything)
Signed-off-by: Domen Puncer <domen@coderock.org>
---
kj/drivers/scsi/dpt/dpt_osdutil.h | 358 --------------------------------------
1 files changed, 358 deletions(-)
diff -L drivers/scsi/dpt/dpt_osdutil.h -puN drivers/scsi/dpt/dpt_osdutil.h~remove_file-drivers_scsi_dpt_dpt_osdutil.h /dev/null
--- kj/drivers/scsi/dpt/dpt_osdutil.h
+++ /dev/null 2005-01-02 23:32:17.000000000 +0100
@@ -1,358 +0,0 @@
-/* BSDI osd_util.h,v 1.8 1998/06/03 19:14:58 karels Exp */
-
-/*
- * Copyright (c) 1996-1999 Distributed Processing Technology Corporation
- * All rights reserved.
- *
- * Redistribution and use in source form, with or without modification, are
- * permitted provided that redistributions of source code must retain the
- * above copyright notice, this list of conditions and the following disclaimer.
- *
- * This software is provided `as is' by Distributed Processing Technology and
- * any express or implied warranties, including, but not limited to, the
- * implied warranties of merchantability and fitness for a particular purpose,
- * are disclaimed. In no event shall Distributed Processing Technology be
- * liable for any direct, indirect, incidental, special, exemplary or
- * consequential damages (including, but not limited to, procurement of
- * substitute goods or services; loss of use, data, or profits; or business
- * interruptions) however caused and on any theory of liability, whether in
- * contract, strict liability, or tort (including negligence or otherwise)
- * arising in any way out of the use of this driver software, even if advised
- * of the possibility of such damage.
- *
- */
-
-#ifndef __OSD_UTIL_H
-#define __OSD_UTIL_H
-
-/*File - OSD_UTIL.H
- ****************************************************************************
- *
- *Description:
- *
- * This file contains defines and function prototypes that are
- *operating system dependent. The resources defined in this file
- *are not specific to any particular application.
- *
- *Copyright Distributed Processing Technology, Corp.
- * 140 Candace Dr.
- * Maitland, Fl. 32751 USA
- * Phone: (407) 830-5522 Fax: (407) 260-5366
- * All Rights Reserved
- *
- *Author: Doug Anderson
- *Date: 1/7/94
- *
- *Editors:
- *
- *Remarks:
- *
- *
- *****************************************************************************/
-
-
-/*Definitions - Defines & Constants ----------------------------------------- */
-
-/*----------------------------- */
-/* Operating system selections: */
-/*----------------------------- */
-
-/*#define _DPT_MSDOS */
-/*#define _DPT_WIN_3X */
-/*#define _DPT_WIN_4X */
-/*#define _DPT_WIN_NT */
-/*#define _DPT_NETWARE */
-/*#define _DPT_OS2 */
-/*#define _DPT_SCO */
-/*#define _DPT_UNIXWARE */
-/*#define _DPT_SOLARIS */
-/*#define _DPT_NEXTSTEP */
-/*#define _DPT_BANYAN */
-
-/*-------------------------------- */
-/* Include the OS specific defines */
-/*-------------------------------- */
-
-/*#define OS_SELECTION From Above List */
-/*#define SEMAPHORE_T ??? */
-/*#define DLL_HANDLE_T ??? */
-
-#if (defined(KERNEL) && (defined(__FreeBSD__) || defined(__bsdi__)))
-# include "i386/isa/dpt_osd_defs.h"
-#else
-# include "osd_defs.h"
-#endif
-
-#ifndef DPT_UNALIGNED
- #define DPT_UNALIGNED
-#endif
-
-#ifndef DPT_EXPORT
- #define DPT_EXPORT
-#endif
-
-#ifndef DPT_IMPORT
- #define DPT_IMPORT
-#endif
-
-#ifndef DPT_RUNTIME_IMPORT
- #define DPT_RUNTIME_IMPORT DPT_IMPORT
-#endif
-
-/*--------------------- */
-/* OS dependent defines */
-/*--------------------- */
-
-#if defined (_DPT_MSDOS) || defined (_DPT_WIN_3X)
- #define _DPT_16_BIT
-#else
- #define _DPT_32_BIT
-#endif
-
-#if defined (_DPT_SCO) || defined (_DPT_UNIXWARE) || defined (_DPT_SOLARIS) || defined (_DPT_AIX) || defined (SNI_MIPS) || defined (_DPT_BSDI) || defined (_DPT_FREE_BSD) || defined(_DPT_LINUX)
- #define _DPT_UNIX
-#endif
-
-#if defined (_DPT_WIN_3x) || defined (_DPT_WIN_4X) || defined (_DPT_WIN_NT) \
- || defined (_DPT_OS2)
- #define _DPT_DLL_SUPPORT
-#endif
-
-#if !defined (_DPT_MSDOS) && !defined (_DPT_WIN_3X) && !defined (_DPT_NETWARE)
- #define _DPT_PREEMPTIVE
-#endif
-
-#if !defined (_DPT_MSDOS) && !defined (_DPT_WIN_3X)
- #define _DPT_MULTI_THREADED
-#endif
-
-#if !defined (_DPT_MSDOS)
- #define _DPT_MULTI_TASKING
-#endif
-
- /* These exist for platforms that */
- /* chunk when accessing mis-aligned */
- /* data */
-#if defined (SNI_MIPS) || defined (_DPT_SOLARIS)
- #if defined (_DPT_BIG_ENDIAN)
- #if !defined (_DPT_STRICT_ALIGN)
- #define _DPT_STRICT_ALIGN
- #endif
- #endif
-#endif
-
- /* Determine if in C or C++ mode */
-#ifdef __cplusplus
- #define _DPT_CPP
-#else
- #define _DPT_C
-#endif
-
-/*-------------------------------------------------------------------*/
-/* Under Solaris the compiler refuses to accept code like: */
-/* { {"DPT"}, 0, NULL .... }, */
-/* and complains about the {"DPT"} part by saying "cannot use { } */
-/* to initialize char*". */
-/* */
-/* By defining these ugly macros we can get around this and also */
-/* not have to copy and #ifdef large sections of code. I know that */
-/* these macros are *really* ugly, but they should help reduce */
-/* maintenance in the long run. */
-/* */
-/*-------------------------------------------------------------------*/
-#if !defined (DPTSQO)
- #if defined (_DPT_SOLARIS)
- #define DPTSQO
- #define DPTSQC
- #else
- #define DPTSQO {
- #define DPTSQC }
- #endif /* solaris */
-#endif /* DPTSQO */
-
-
-/*---------------------- */
-/* OS dependent typedefs */
-/*---------------------- */
-
-#if defined (_DPT_MSDOS) || defined (_DPT_SCO)
- #define BYTE unsigned char
- #define WORD unsigned short
-#endif
-
-#ifndef _DPT_TYPEDEFS
- #define _DPT_TYPEDEFS
- typedef unsigned char uCHAR;
- typedef unsigned short uSHORT;
- typedef unsigned int uINT;
- typedef unsigned long uLONG;
-
- typedef union {
- uCHAR u8[4];
- uSHORT u16[2];
- uLONG u32;
- } access_U;
-#endif
-
-#if !defined (NULL)
- #define NULL 0
-#endif
-
-
-/*Prototypes - function ----------------------------------------------------- */
-
-#ifdef __cplusplus
- extern "C" { /* Declare all these functions as "C" functions */
-#endif
-
-/*------------------------ */
-/* Byte reversal functions */
-/*------------------------ */
-
- /* Reverses the byte ordering of a 2 byte variable */
-#if (!defined(osdSwap2))
- uSHORT osdSwap2(DPT_UNALIGNED uSHORT *);
-#endif // !osdSwap2
-
- /* Reverses the byte ordering of a 4 byte variable and shifts left 8 bits */
-#if (!defined(osdSwap3))
- uLONG osdSwap3(DPT_UNALIGNED uLONG *);
-#endif // !osdSwap3
-
-
-#ifdef _DPT_NETWARE
- #include "novpass.h" /* For DPT_Bswapl() prototype */
- /* Inline the byte swap */
- #ifdef __cplusplus
- inline uLONG osdSwap4(uLONG *inLong) {
- return *inLong = DPT_Bswapl(*inLong);
- }
- #else
- #define osdSwap4(inLong) DPT_Bswapl(inLong)
- #endif // cplusplus
-#else
- /* Reverses the byte ordering of a 4 byte variable */
-# if (!defined(osdSwap4))
- uLONG osdSwap4(DPT_UNALIGNED uLONG *);
-# endif // !osdSwap4
-
- /* The following functions ALWAYS swap regardless of the *
- * presence of DPT_BIG_ENDIAN */
-
- uSHORT trueSwap2(DPT_UNALIGNED uSHORT *);
- uLONG trueSwap4(DPT_UNALIGNED uLONG *);
-
-#endif // netware
-
-
-/*-------------------------------------*
- * Network order swap functions *
- * *
- * These functions/macros will be used *
- * by the structure insert()/extract() *
- * functions. *
- *
- * We will enclose all structure *
- * portability modifications inside *
- * #ifdefs. When we are ready, we *
- * will #define DPT_PORTABLE to begin *
- * using the modifications. *
- *-------------------------------------*/
-uLONG netSwap4(uLONG val);
-
-#if defined (_DPT_BIG_ENDIAN)
-
-// for big-endian we need to swap
-
-#ifndef NET_SWAP_2
-#define NET_SWAP_2(x) (((x) >> 8) | ((x) << 8))
-#endif // NET_SWAP_2
-
-#ifndef NET_SWAP_4
-#define NET_SWAP_4(x) netSwap4((x))
-#endif // NET_SWAP_4
-
-#else
-
-// for little-endian we don't need to do anything
-
-#ifndef NET_SWAP_2
-#define NET_SWAP_2(x) (x)
-#endif // NET_SWAP_2
-
-#ifndef NET_SWAP_4
-#define NET_SWAP_4(x) (x)
-#endif // NET_SWAP_4
-
-#endif // big endian
-
-
-
-/*----------------------------------- */
-/* Run-time loadable module functions */
-/*----------------------------------- */
-
- /* Loads the specified run-time loadable DLL */
-DLL_HANDLE_T osdLoadModule(uCHAR *);
- /* Unloads the specified run-time loadable DLL */
-uSHORT osdUnloadModule(DLL_HANDLE_T);
- /* Returns a pointer to a function inside a run-time loadable DLL */
-void * osdGetFnAddr(DLL_HANDLE_T,uCHAR *);
-
-/*--------------------------------------- */
-/* Mutually exclusive semaphore functions */
-/*--------------------------------------- */
-
- /* Create a named semaphore */
-SEMAPHORE_T osdCreateNamedSemaphore(char *);
- /* Create a mutually exlusive semaphore */
-SEMAPHORE_T osdCreateSemaphore(void);
- /* create an event semaphore */
-SEMAPHORE_T osdCreateEventSemaphore(void);
- /* create a named event semaphore */
-SEMAPHORE_T osdCreateNamedEventSemaphore(char *);
-
- /* Destroy the specified mutually exclusive semaphore object */
-uSHORT osdDestroySemaphore(SEMAPHORE_T);
- /* Request access to the specified mutually exclusive semaphore */
-uLONG osdRequestSemaphore(SEMAPHORE_T,uLONG);
- /* Release access to the specified mutually exclusive semaphore */
-uSHORT osdReleaseSemaphore(SEMAPHORE_T);
- /* wait for a event to happen */
-uLONG osdWaitForEventSemaphore(SEMAPHORE_T, uLONG);
- /* signal an event */
-uLONG osdSignalEventSemaphore(SEMAPHORE_T);
- /* reset the event */
-uLONG osdResetEventSemaphore(SEMAPHORE_T);
-
-/*----------------- */
-/* Thread functions */
-/*----------------- */
-
- /* Releases control to the task switcher in non-preemptive */
- /* multitasking operating systems. */
-void osdSwitchThreads(void);
-
- /* Starts a thread function */
-uLONG osdStartThread(void *,void *);
-
-/* what is my thread id */
-uLONG osdGetThreadID(void);
-
-/* wakes up the specifed thread */
-void osdWakeThread(uLONG);
-
-/* osd sleep for x miliseconds */
-void osdSleep(uLONG);
-
-#define DPT_THREAD_PRIORITY_LOWEST 0x00
-#define DPT_THREAD_PRIORITY_NORMAL 0x01
-#define DPT_THREAD_PRIORITY_HIGHEST 0x02
-
-uCHAR osdSetThreadPriority(uLONG tid, uCHAR priority);
-
-#ifdef __cplusplus
- } /* end the xtern "C" declaration */
-#endif
-
-#endif /* osd_util_h */
_
reply other threads:[~2005-01-11 23:23 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050111232303.E80BD1F22A@trashy.coderock.org \
--to=domen@coderock.org \
--cc=James.Bottomley@SteelEye.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox