From: Olaf Hering <olh@suse.de>
To: linux-scsi@vger.kernel.org
Subject: 2.6.11rc2 prints disksize twice
Date: Mon, 31 Jan 2005 13:15:37 +0100 [thread overview]
Message-ID: <20050131121537.GA32111@suse.de> (raw)
I think its not a functional problem,
but parts of the disk detection is printed twice.
...
SCSI device sdc: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sdc: drive cache: write through
SCSI device sdc: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sdc: drive cache: write through
...
Loading sym0: <1010-66> rev 0x1 at pci 0000:41:01.0 irq 103
kernel/drivers/ssym0: No NVRAM, ID 7, Fast-80, LVD, parity checking
csi/scsi_mod.ko
Loading kernel/drivers/scsi/sdsym0: SCSI BUS has been reset.
_mod.ko
Loadingscsi0 : sym-2.1.18n
kernel/drivers/scsi/sr_mod.ko
Loading kernel/drivers/scsi/scsi_transport_spi.ko
Loading kernel/drivers/scsi/sym53c8xx_2/sym53c8xx.ko
sym0:8: FAST-40 WIDE SCSI 80.0 MB/s ST (25.0 ns, offset 31)
Vendor: IBM Model: IC35L036UCDY10-0 Rev: S28C
Type: Direct-Access ANSI SCSI revision: 03
sym0:8:0: tagged command queuing enabled, command queue depth 16.
target0:0:8: Beginning Domain Validation
sym0:8: asynchronous.
sym0:8: wide asynchronous.
sym0:8: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
target0:0:8: Ending Domain Validation
SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sda: drive cache: write through
SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sda: drive cache: write through
sda: sda2 sda3 sda4
Attached scsi disk sda at scsi0, channel 0, id 8, lun 0
sym0:9: FAST-40 WIDE SCSI 80.0 MB/s ST (25.0 ns, offset 31)
Vendor: IBM Model: IC35L036UCDY10-0 Rev: S28C
Type: Direct-Access ANSI SCSI revision: 03
sym0:9:0: tagged command queuing enabled, command queue depth 16.
target0:0:9: Beginning Domain Validation
sym0:9: asynchronous.
sym0:9: wide asynchronous.
sym0:9: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
target0:0:9: Ending Domain Validation
SCSI device sdb: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sdb: drive cache: write through
SCSI device sdb: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sdb: drive cache: write through
sdb: sdb1 sdb2 sdb3
Attached scsi disk sdb at scsi0, channel 0, id 9, lun 0
sym0:10: FAST-40 WIDE SCSI 80.0 MB/s ST (25.0 ns, offset 31)
Vendor: IBM Model: IC35L036UCDY10-0 Rev: S28C
Type: Direct-Access ANSI SCSI revision: 03
sym0:10:0: tagged command queuing enabled, command queue depth 16.
target0:0:10: Beginning Domain Validation
sym0:10: asynchronous.
sym0:10: wide asynchronous.
sym0:10: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
target0:0:10: Ending Domain Validation
SCSI device sdc: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sdc: drive cache: write through
SCSI device sdc: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sdc: drive cache: write through
sdc: sdc1 sdc2 sdc3
Attached scsi disk sdc at scsi0, channel 0, id 10, lun 0
Vendor: IBM Model: HSBPD4E PU3SCSI Rev: 0016
Type: Enclosure ANSI SCSI revision: 02
target0:0:15: Beginning Domain Validation
target0:0:15: Ending Domain Validation
sym1: <1010-66> rev 0x1 at pci 0000:41:01.1 irq 104
sym1: No NVRAM, ID 7, Fast-80, LVD, parity checking
sym1: SCSI BUS has been reset.
scsi1 : sym-2.1.18n
next reply other threads:[~2005-01-31 12:15 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-31 12:15 Olaf Hering [this message]
2005-01-31 17:05 ` 2.6.11rc2 prints disksize twice Patrick Mansfield
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050131121537.GA32111@suse.de \
--to=olh@suse.de \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).