From: oliver@windfinder.com
To: Matt_Domsch@dell.com, linux-poweredge@dell.com,
linux-scsi@vger.kernel.org
Cc: Thomas Glas <thomas.glas@hanse.net>
Subject: Raid1 on Dell Poweredge with Perc4e/Di Raid Controller running Debian Sarge (3.1)
Date: Thu, 21 Apr 2005 10:30:55 +0200 [thread overview]
Message-ID: <200504211030.56948.oliver@windfinder.com> (raw)
Hello,
I would like to use Raid1 on the Dell Poweredge with Perc4e/Di Raid Controller
and two 2 73 GB drives running Debian Sarge (3.1).
At http://linux.dell.com/storage.shtml I read that the Powerege 2850 Perc4e/Di
requires megaraid2 driver 2.00.3 or higher on 2.4.x kernel. On 2.6.x kernels
(x < 9) there is no driver for these adapters. On 2.6.x (x >= 9) use the
'megaraid_mbox' and 'megaraid_mm' drivers.
Problem: The Debian Installers offers only to install:
- 2.4.x (which seems to be okay for the raid) OR
- 2.6.8 (which would not allow the use of the Raid)
Solution:
Is there a megaraid driver for the 2.6.8 kernel? If so, where?
If not, should I use 2.4.x kernel or try to install a 2.6.9 kernel on Debian
Sarge?
--
Oliver König
Windfinder.com
Knorrstr. 24 Hinterhaus
24106 Kiel
Germany
phone +49 431-8008643
VoIP +49 1801-7775558229
fax +49 431-8008644
Mobile +49 177-4933362
oliver@windfinder.com
www.windfinder.com
_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq
next reply other threads:[~2005-04-21 8:30 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-04-21 8:30 oliver [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-04-22 19:14 Raid1 on Dell Poweredge with Perc4e/Di Raid Controller runnin gDebian Sarge (3.1) Dennis Ruzeski
2005-04-23 10:26 ` Raid1 on Dell Poweredge with Perc4e/Di Raid Controller running Debian " oliver
2005-04-20 11:22 oliver
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200504211030.56948.oliver@windfinder.com \
--to=oliver@windfinder.com \
--cc=Matt_Domsch@dell.com \
--cc=linux-poweredge@dell.com \
--cc=linux-scsi@vger.kernel.org \
--cc=thomas.glas@hanse.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox