From: oliver@windfinder.com
To: "Ju, Seokmann" <sju@lsil.com>,
aschultz@warp10.net, Matt_Domsch@dell.com,
linux-poweredge@dell.com, linux-scsi@vger.kernel.org,
Jonas Kaufmann <me@j0nes.de>, Thomas Glas <thomas.glas@hanse.net>,
Sebastian Kamp <sebastian.kamp@ottogroup.com>
Subject: Re: Raid1 on Dell Poweredge with Perc4e/Di Raid Controller runnin g Debian Sarge (3.1)
Date: Fri, 22 Apr 2005 21:07:49 +0200 [thread overview]
Message-ID: <200504222107.50290.oliver@windfinder.com> (raw)
In-Reply-To: <0E3FA95632D6D047BA649F95DAB60E5703662801@exa-atlanta>
Hello Ju,
thanks for your help. I am a total newbie but I managed to compile a new
kernel with your patch:
/boot/vmlinuz-2.6.8-1
Then I did:
server:/boot # mkinitrd -o /boot/initrd.img-2.6.8-1 2.6.8-1
Fatal: Module megaraid2 not found.
Warning: This failure MAY indicate that your kernel will not boot!
but it can also be triggered by needed modules being compiled into the kernel.
Does this mean, that you patch is not working or did I make a mistake?
Best regards,
Oliver
On Friday 22 April 2005 15:30, you wrote:
> On Thursday, April 21, 2005 4:31 AM, Oliver wrote,
>
> > Is there a megaraid driver for the 2.6.8 kernel? If so, where?
>
> Try attached. It has driver source with one patch file (2.6.8-24.patch).
> Please make sure to apply the patch before compile.
>
> Thank you.
>
> > -----Original Message-----
> > From: oliver@windfinder.com [mailto:oliver@windfinder.com]
> > Sent: Thursday, April 21, 2005 4:31 AM
> > To: Matt_Domsch@dell.com; linux-poweredge@dell.com;
> > linux-scsi@vger.kernel.org
> > Cc: Thomas Glas
> > Subject: Raid1 on Dell Poweredge with Perc4e/Di Raid
> > Controller running Debian Sarge (3.1)
> >
> > Hello,
> > I would like to use Raid1 on the Dell Poweredge with
> > Perc4e/Di Raid Controller
> > and two 2 73 GB drives running Debian Sarge (3.1).
> >
> > At http://linux.dell.com/storage.shtml I read that the
> > Powerege 2850 Perc4e/Di
> > requires megaraid2 driver 2.00.3 or higher on 2.4.x kernel.
> > On 2.6.x kernels
> > (x < 9) there is no driver for these adapters. On 2.6.x (x >=
> > 9) use the
> > 'megaraid_mbox' and 'megaraid_mm' drivers.
> >
> > Problem: The Debian Installers offers only to install:
> >
> > - 2.4.x (which seems to be okay for the raid) OR
> > - 2.6.8 (which would not allow the use of the Raid)
> >
> > Solution:
> > Is there a megaraid driver for the 2.6.8 kernel? If so, where?
> >
> > If not, should I use 2.4.x kernel or try to install a 2.6.9
> > kernel on Debian
> > Sarge?
> >
> > --
> > Oliver König
> >
> > Windfinder.com
> > Knorrstr. 24 Hinterhaus
> > 24106 Kiel
> > Germany
> > phone +49 431-8008643
> > VoIP +49 1801-7775558229
> > fax +49 431-8008644
> > Mobile +49 177-4933362
> > oliver@windfinder.com
> > www.windfinder.com
> > -
> > To unsubscribe from this list: send the line "unsubscribe
> > linux-scsi" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Oliver König
Windfinder.com
Knorrstr. 24 Hinterhaus
24106 Kiel
Germany
phone +49 431-8008643
VoIP +49 1801-7775558229
fax +49 431-8008644
Mobile +49 177-4933362
oliver@windfinder.com
www.windfinder.com
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
parent reply other threads:[~2005-04-22 19:08 UTC|newest]
Thread overview: expand[flat|nested] mbox.gz Atom feed
[parent not found: <0E3FA95632D6D047BA649F95DAB60E5703662801@exa-atlanta>]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200504222107.50290.oliver@windfinder.com \
--to=oliver@windfinder.com \
--cc=Matt_Domsch@dell.com \
--cc=aschultz@warp10.net \
--cc=linux-poweredge@dell.com \
--cc=linux-scsi@vger.kernel.org \
--cc=me@j0nes.de \
--cc=sebastian.kamp@ottogroup.com \
--cc=sju@lsil.com \
--cc=thomas.glas@hanse.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox