From mboxrd@z Thu Jan 1 00:00:00 1970 From: oliver@windfinder.com Subject: Re: Raid1 on Dell Poweredge with Perc4e/Di Raid Controller running Debian Sarge (3.1) Date: Sat, 23 Apr 2005 12:26:03 +0200 Message-ID: <200504231226.04522.oliver@windfinder.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from www.windfinder.de ([81.201.107.60]:18396 "HELO windfinder.com") by vger.kernel.org with SMTP id S261535AbVDWK05 convert rfc822-to-8bit (ORCPT ); Sat, 23 Apr 2005 06:26:57 -0400 In-Reply-To: Content-Disposition: inline Sender: linux-scsi-owner@vger.kernel.org List-Id: linux-scsi@vger.kernel.org To: Dennis Ruzeski , "Ju, Seokmann" , aschultz@warp10.net, Matt_Domsch@dell.com, linux-poweredge@dell.com, linux-scsi@vger.kernel.org Cc: Jonas Kaufmann , Thomas Glas , Sebastian Kamp Hello Denis, this is what I just did cd /usr/src/kernel-image-2.6.8 patch -l < ./megaraid-v2.20.4.6/2.6.8-24.patch cd /boot cp config-2.6.8-24.14-default /usr/src/linux/.config cd /usr/src/linux make oldconfig=20 make make modules_install cp /usr/src/linux/arch/i386/boot/bzImage /boot/vmlinuz-2.6.8 cp System.map /usr/src/linux/System.map /boot/System.map-2.6.8 [Edited /boot/grub/menu.lst] [Added the line megaraid_mbox to /etc/modules.conf Note: there war no e= ntry=20 megaraid2 or similar in this file] server:/boot # mkinitrd -o /boot/initrd.img-2.6.8-1 2.6.8-1 =46atal: =46atal: Module megaraid2 not found. Warning: This failure MAY indicate that your kernel will not boot! but it can also be triggered by needed modules being compiled into the kernel. Any ideas? Please help! Thanks! Regards, Oliver On Friday 22 April 2005 21:14, you wrote: > For that you'll need to edit /etc/modules.conf and change the megarai= d2 > entry to megaraid_mbox. Also, make sure you have the latest version o= f > mkinitrd (to recognize the .ko module extension). > > Good luck, > Dennis > > > > -----Original Message----- > From: linux-poweredge-bounces@dell.com > [mailto:linux-poweredge-bounces@dell.com] On Behalf Of > oliver@windfinder.com Sent: Friday, April 22, 2005 3:08 PM > To: Ju, Seokmann; aschultz@warp10.net; Matt_Domsch@dell.com; > linux-poweredge@dell.com; linux-scsi@vger.kernel.org; Jonas Kaufmann; > Thomas Glas; Sebastian Kamp Subject: Re: Raid1 on Dell Poweredge with > Perc4e/Di Raid Controller runnin gDebian Sarge (3.1) > > Hello Ju, > thanks for your help. I am a total newbie but I managed to compile a = new > kernel with your patch: > > /boot/vmlinuz-2.6.8-1 > > Then I did: > server:/boot # mkinitrd -o /boot/initrd.img-2.6.8-1 2.6.8-1 > Fatal: Module megaraid2 not found. > Warning: This failure MAY indicate that your kernel will not boot! > but it can also be triggered by needed modules being compiled into th= e > kernel. > > Does this mean, that you patch is not working or did I make a mistake= ? > > Best regards, > Oliver > > On Friday 22 April 2005 15:30, you wrote: > > On Thursday, April 21, 2005 4:31 AM, Oliver wrote, > > > > > Is there a megaraid driver for the 2.6.8 kernel? If so, where? > > > > Try attached. It has driver source with one patch file (2.6.8-24.pa= tch). > > Please make sure to apply the patch before compile. > > > > Thank you. > > > > > -----Original Message----- > > > From: oliver@windfinder.com [mailto:oliver@windfinder.com] > > > Sent: Thursday, April 21, 2005 4:31 AM > > > To: Matt_Domsch@dell.com; linux-poweredge@dell.com; > > > linux-scsi@vger.kernel.org > > > Cc: Thomas Glas > > > Subject: Raid1 on Dell Poweredge with Perc4e/Di Raid > > > Controller running Debian Sarge (3.1) > > > > > > Hello, > > > I would like to use Raid1 on the Dell Poweredge with > > > Perc4e/Di Raid Controller > > > and two 2 73 GB drives running Debian Sarge (3.1). > > > > > > At http://linux.dell.com/storage.shtml I read that the > > > Powerege 2850 Perc4e/Di > > > requires megaraid2 driver 2.00.3 or higher on 2.4.x kernel. > > > On 2.6.x kernels > > > (x < 9) there is no driver for these adapters. On 2.6.x (x >=3D > > > 9) use the > > > 'megaraid_mbox' and 'megaraid_mm' drivers. > > > > > > Problem: The Debian Installers offers only to install: > > > > > > - 2.4.x (which seems to be okay for the raid) OR > > > - 2.6.8 (which would not allow the use of the Raid) > > > > > > Solution: > > > Is there a megaraid driver for the 2.6.8 kernel? If so, where? > > > > > > If not, should I use 2.4.x kernel or try to install a 2.6.9 > > > kernel on Debian > > > Sarge? > > > > > > -- > > > Oliver K=F6nig > > > > > > Windfinder.com > > > Knorrstr. 24 Hinterhaus > > > 24106 Kiel > > > Germany > > > phone +49 431-8008643 > > > VoIP +49 1801-7775558229 > > > fax +49 431-8008644 > > > Mobile +49 177-4933362 > > > oliver@windfinder.com > > > www.windfinder.com > > > - > > > To unsubscribe from this list: send the line "unsubscribe > > > linux-scsi" in > > > the body of a message to majordomo@vger.kernel.org > > > More majordomo info at http://vger.kernel.org/majordomo-info.htm= l --=20 Oliver K=F6nig Windfinder.com Knorrstr. 24 Hinterhaus 24106 Kiel Germany phone +49 431-8008643 VoIP +49 1801-7775558229 fax +49 431-8008644 Mobile +49 177-4933362 oliver@windfinder.com www.windfinder.com - To unsubscribe from this list: send the line "unsubscribe linux-scsi" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html