From: Andrew Vasquez <andrew.vasquez@qlogic.com>
To: James Bottomley <James.Bottomley@SteelEye.com>,
Linux-SCSI Mailing List <linux-scsi@vger.kernel.org>
Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>
Subject: [PATCH 6/11] qla2xxx: Add ISP24xx IOCB manipulation routines.
Date: Mon, 13 Jun 2005 22:32:07 -0700 (PDT) [thread overview]
Message-ID: <20050614053207.12127.3402.sendpatchset@plap.qlogic.com> (raw)
In-Reply-To: <20050614053136.12127.506.sendpatchset@plap.qlogic.com>
Add ISP24xx IOCB manipulation routines.
Add appropriate glue-code for ISP24xx support while
manipulting IOCB packets. Add an ISP24xx specific
'start_scsi' routine due to command-type-7 layout
changes.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
---
drivers/scsi/qla2xxx/qla_gbl.h | 1
drivers/scsi/qla2xxx/qla_iocb.c | 346 +++++++++++++++++++++++++++++++++++++--
2 files changed, 333 insertions(+), 14 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -85,6 +85,7 @@ extern uint16_t qla2x00_calc_iocbs_64(ui
extern void qla2x00_build_scsi_iocbs_32(srb_t *, cmd_entry_t *, uint16_t);
extern void qla2x00_build_scsi_iocbs_64(srb_t *, cmd_entry_t *, uint16_t);
extern int qla2x00_start_scsi(srb_t *sp);
+extern int qla24xx_start_scsi(srb_t *sp);
int qla2x00_marker(scsi_qla_host_t *, uint16_t, uint16_t, uint8_t);
int __qla2x00_marker(scsi_qla_host_t *, uint16_t, uint16_t, uint8_t);
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -468,29 +468,37 @@ queuing_error:
*
* Returns non-zero if a failure occured, else zero.
*/
-int
+int
__qla2x00_marker(scsi_qla_host_t *ha, uint16_t loop_id, uint16_t lun,
uint8_t type)
{
- mrk_entry_t *pkt;
+ mrk_entry_t *mrk;
+ struct mrk_entry_24xx *mrk24;
- pkt = (mrk_entry_t *)qla2x00_req_pkt(ha);
- if (pkt == NULL) {
- DEBUG2_3(printk("%s(): **** FAILED ****\n", __func__));
+ mrk24 = NULL;
+ mrk = (mrk_entry_t *)qla2x00_req_pkt(ha);
+ if (mrk == NULL) {
+ DEBUG2_3(printk("%s(%ld): failed to allocate Marker IOCB.\n",
+ __func__, ha->host_no));
return (QLA_FUNCTION_FAILED);
}
- pkt->entry_type = MARKER_TYPE;
- pkt->modifier = type;
-
+ mrk->entry_type = MARKER_TYPE;
+ mrk->modifier = type;
if (type != MK_SYNC_ALL) {
- pkt->lun = cpu_to_le16(lun);
- SET_TARGET_ID(ha, pkt->target, loop_id);
+ if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
+ mrk24 = (struct mrk_entry_24xx *) mrk;
+ mrk24->nport_handle = cpu_to_le16(loop_id);
+ mrk24->lun[1] = LSB(lun);
+ mrk24->lun[2] = MSB(lun);
+ } else {
+ SET_TARGET_ID(ha, mrk->target, loop_id);
+ mrk->lun = cpu_to_le16(lun);
+ }
}
wmb();
- /* Issue command to ISP */
qla2x00_isp_cmd(ha);
return (QLA_SUCCESS);
@@ -522,6 +530,8 @@ static request_t *
qla2x00_req_pkt(scsi_qla_host_t *ha)
{
device_reg_t __iomem *reg = ha->iobase;
+ struct device_reg_24xx __iomem *reg24 =
+ (struct device_reg_24xx __iomem *) ha->iobase;
request_t *pkt = NULL;
uint16_t cnt;
uint32_t *dword_ptr;
@@ -532,7 +542,11 @@ qla2x00_req_pkt(scsi_qla_host_t *ha)
for (timer = HZ; timer; timer--) {
if ((req_cnt + 2) >= ha->req_q_cnt) {
/* Calculate number of free request entries. */
- cnt = qla2x00_debounce_register(ISP_REQ_Q_OUT(ha, reg));
+ if (IS_QLA24XX(ha) || IS_QLA25XX(ha))
+ cnt = (uint16_t)RD_REG_DWORD(®24->req_q_out);
+ else
+ cnt = qla2x00_debounce_register(
+ ISP_REQ_Q_OUT(ha, reg));
if (ha->req_ring_index < cnt)
ha->req_q_cnt = cnt - ha->req_ring_index;
else
@@ -601,6 +615,310 @@ qla2x00_isp_cmd(scsi_qla_host_t *ha)
ha->request_ring_ptr++;
/* Set chip new ring index. */
- WRT_REG_WORD(ISP_REQ_Q_IN(ha, reg), ha->req_ring_index);
- RD_REG_WORD_RELAXED(ISP_REQ_Q_IN(ha, reg)); /* PCI Posting. */
+ if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
+ struct device_reg_24xx __iomem *reg24 =
+ (struct device_reg_24xx __iomem *) ha->iobase;
+ WRT_REG_DWORD(®24->req_q_in, ha->req_ring_index);
+ RD_REG_DWORD_RELAXED(®24->req_q_in); /* PCI Posting. */
+ } else {
+ WRT_REG_WORD(ISP_REQ_Q_IN(ha, reg), ha->req_ring_index);
+ RD_REG_WORD_RELAXED(ISP_REQ_Q_IN(ha, reg)); /* PCI Posting. */
+ }
+
+}
+
+//
+// ISP24xx
+//
+
+/*****************************************************************************/
+/* qla_iocb.c additions */
+/*****************************************************************************/
+
+/**
+ * qla24xx_calc_iocbs() - Determine number of Command Type 3 and
+ * Continuation Type 1 IOCBs to allocate.
+ *
+ * @dsds: number of data segment decriptors needed
+ *
+ * Returns the number of IOCB entries needed to store @dsds.
+ */
+static inline uint16_t
+qla24xx_calc_iocbs(uint16_t dsds)
+{
+ uint16_t iocbs;
+
+ iocbs = 1;
+ if (dsds > 1) {
+ iocbs += (dsds - 1) / 5;
+ if ((dsds - 1) % 5)
+ iocbs++;
+ }
+ return iocbs;
+}
+
+/**
+ * qla24xx_build_scsi_iocbs() - Build IOCB command utilizing Command Type 7
+ * IOCB types.
+ *
+ * @sp: SRB command to process
+ * @cmd_pkt: Command type 3 IOCB
+ * @tot_dsds: Total number of segments to transfer
+ */
+static inline void
+qla24xx_build_scsi_iocbs(srb_t *sp, struct cmd_type_7 *cmd_pkt,
+ uint16_t tot_dsds)
+{
+ uint16_t avail_dsds;
+ uint32_t *cur_dsd;
+ scsi_qla_host_t *ha;
+ struct scsi_cmnd *cmd;
+
+ cmd = sp->cmd;
+
+ /* Update entry type to indicate Command Type 3 IOCB */
+ *((uint32_t *)(&cmd_pkt->entry_type)) =
+ __constant_cpu_to_le32(COMMAND_TYPE_7);
+
+ /* No data transfer */
+ if (cmd->request_bufflen == 0 || cmd->sc_data_direction == DMA_NONE) {
+ cmd_pkt->byte_count = __constant_cpu_to_le32(0);
+ return;
+ }
+
+ ha = sp->ha;
+
+ /* Set transfer direction */
+ if (cmd->sc_data_direction == DMA_TO_DEVICE)
+ cmd_pkt->task_mgmt_flags =
+ __constant_cpu_to_le16(TMF_WRITE_DATA);
+ else if (cmd->sc_data_direction == DMA_FROM_DEVICE)
+ cmd_pkt->task_mgmt_flags =
+ __constant_cpu_to_le16(TMF_READ_DATA);
+
+ /* One DSD is available in the Command Type 3 IOCB */
+ avail_dsds = 1;
+ cur_dsd = (uint32_t *)&cmd_pkt->dseg_0_address;
+
+ /* Load data segments */
+ if (cmd->use_sg != 0) {
+ struct scatterlist *cur_seg;
+ struct scatterlist *end_seg;
+
+ cur_seg = (struct scatterlist *)cmd->request_buffer;
+ end_seg = cur_seg + tot_dsds;
+ while (cur_seg < end_seg) {
+ dma_addr_t sle_dma;
+ cont_a64_entry_t *cont_pkt;
+
+ /* Allocate additional continuation packets? */
+ if (avail_dsds == 0) {
+ /*
+ * Five DSDs are available in the Continuation
+ * Type 1 IOCB.
+ */
+ cont_pkt = qla2x00_prep_cont_type1_iocb(ha);
+ cur_dsd = (uint32_t *)cont_pkt->dseg_0_address;
+ avail_dsds = 5;
+ }
+
+ sle_dma = sg_dma_address(cur_seg);
+ *cur_dsd++ = cpu_to_le32(LSD(sle_dma));
+ *cur_dsd++ = cpu_to_le32(MSD(sle_dma));
+ *cur_dsd++ = cpu_to_le32(sg_dma_len(cur_seg));
+ avail_dsds--;
+
+ cur_seg++;
+ }
+ } else {
+ *cur_dsd++ = cpu_to_le32(LSD(sp->dma_handle));
+ *cur_dsd++ = cpu_to_le32(MSD(sp->dma_handle));
+ *cur_dsd++ = cpu_to_le32(cmd->request_bufflen);
+ }
+}
+
+
+/**
+ * qla24xx_start_scsi() - Send a SCSI command to the ISP
+ * @sp: command to send to the ISP
+ *
+ * Returns non-zero if a failure occured, else zero.
+ */
+int
+qla24xx_start_scsi(srb_t *sp)
+{
+ int ret;
+ unsigned long flags;
+ scsi_qla_host_t *ha;
+ struct scsi_cmnd *cmd;
+ uint32_t *clr_ptr;
+ uint32_t index;
+ uint32_t handle;
+ struct cmd_type_7 *cmd_pkt;
+ uint32_t timeout;
+ struct scatterlist *sg;
+ uint16_t cnt;
+ uint16_t req_cnt;
+ uint16_t tot_dsds;
+ struct device_reg_24xx __iomem *reg;
+ char tag[2];
+
+ /* Setup device pointers. */
+ ret = 0;
+ ha = sp->ha;
+ reg = (struct device_reg_24xx __iomem *)ha->iobase;
+ cmd = sp->cmd;
+ /* So we know we haven't pci_map'ed anything yet */
+ tot_dsds = 0;
+
+ /* Send marker if required */
+ if (ha->marker_needed != 0) {
+ if (qla2x00_marker(ha, 0, 0, MK_SYNC_ALL) != QLA_SUCCESS) {
+ return QLA_FUNCTION_FAILED;
+ }
+ ha->marker_needed = 0;
+ }
+
+ /* Acquire ring specific lock */
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+
+ /* Check for room in outstanding command list. */
+ handle = ha->current_outstanding_cmd;
+ for (index = 1; index < MAX_OUTSTANDING_COMMANDS; index++) {
+ handle++;
+ if (handle == MAX_OUTSTANDING_COMMANDS)
+ handle = 1;
+ if (ha->outstanding_cmds[handle] == 0)
+ break;
+ }
+ if (index == MAX_OUTSTANDING_COMMANDS)
+ goto queuing_error;
+
+ /* Map the sg table so we have an accurate count of sg entries needed */
+ if (cmd->use_sg) {
+ sg = (struct scatterlist *) cmd->request_buffer;
+ tot_dsds = pci_map_sg(ha->pdev, sg, cmd->use_sg,
+ cmd->sc_data_direction);
+ if (tot_dsds == 0)
+ goto queuing_error;
+ } else if (cmd->request_bufflen) {
+ dma_addr_t req_dma;
+
+ req_dma = pci_map_single(ha->pdev, cmd->request_buffer,
+ cmd->request_bufflen, cmd->sc_data_direction);
+ if (dma_mapping_error(req_dma))
+ goto queuing_error;
+
+ sp->dma_handle = req_dma;
+ tot_dsds = 1;
+ }
+
+ req_cnt = qla24xx_calc_iocbs(tot_dsds);
+ if (ha->req_q_cnt < (req_cnt + 2)) {
+ cnt = (uint16_t)RD_REG_DWORD_RELAXED(®->req_q_out);
+ if (ha->req_ring_index < cnt)
+ ha->req_q_cnt = cnt - ha->req_ring_index;
+ else
+ ha->req_q_cnt = ha->request_q_length -
+ (ha->req_ring_index - cnt);
+ }
+ if (ha->req_q_cnt < (req_cnt + 2)) {
+ if (cmd->use_sg)
+ pci_unmap_sg(ha->pdev, sg, cmd->use_sg,
+ cmd->sc_data_direction);
+ goto queuing_error;
+ }
+
+ /* Build command packet. */
+ ha->current_outstanding_cmd = handle;
+ ha->outstanding_cmds[handle] = sp;
+ sp->ha = ha;
+ sp->cmd->host_scribble = (unsigned char *)(unsigned long)handle;
+ ha->req_q_cnt -= req_cnt;
+
+ cmd_pkt = (struct cmd_type_7 *)ha->request_ring_ptr;
+ cmd_pkt->handle = handle;
+
+ /* Zero out remaining portion of packet. */
+ clr_ptr = (uint32_t *)cmd_pkt + 2;
+ memset(clr_ptr, 0, REQUEST_ENTRY_SIZE - 8);
+
+ cmd_pkt->nport_handle = cpu_to_le16(sp->fcport->loop_id);
+ cmd_pkt->port_id[0] = sp->fcport->d_id.b.al_pa;
+ cmd_pkt->port_id[1] = sp->fcport->d_id.b.area;
+ cmd_pkt->port_id[2] = sp->fcport->d_id.b.domain;
+
+ /* Update timeout. */
+ timeout = (uint32_t)(cmd->timeout_per_command / HZ);
+ if (timeout > FW_MAX_TIMEOUT)
+ cmd_pkt->timeout =
+ __constant_cpu_to_le16(FW_MAX_TIMEOUT);
+ else if (timeout > 25)
+ cmd_pkt->timeout = cpu_to_le16((uint16_t)timeout -
+ (5 + QLA_CMD_TIMER_DELTA));
+ else
+ cmd_pkt->timeout = cpu_to_le16((uint16_t)timeout);
+
+ cmd_pkt->dseg_count = cpu_to_le16(tot_dsds);
+
+ /* Set LUN number*/
+ cmd_pkt->lun[1] = LSB(sp->cmd->device->lun);
+ cmd_pkt->lun[2] = MSB(sp->cmd->device->lun);
+
+ /* Update tagged queuing modifier -- default is TSK_SIMPLE (0). */
+ if (scsi_populate_tag_msg(cmd, tag)) {
+ switch (tag[0]) {
+ case MSG_HEAD_TAG:
+ cmd_pkt->task = TSK_HEAD_OF_QUEUE;
+ break;
+ case MSG_ORDERED_TAG:
+ cmd_pkt->task = TSK_ORDERED;
+ break;
+ }
+ }
+
+ /* Load SCSI command packet. */
+ memcpy(cmd_pkt->fcp_cdb, cmd->cmnd, cmd->cmd_len);
+ host_to_fcp_swap(cmd_pkt->fcp_cdb, sizeof(cmd_pkt->fcp_cdb));
+
+ cmd_pkt->byte_count = cpu_to_le32((uint32_t)cmd->request_bufflen);
+
+ /* Build IOCB segments */
+ qla24xx_build_scsi_iocbs(sp, cmd_pkt, tot_dsds);
+
+ /* Set total data segment count. */
+ cmd_pkt->entry_count = (uint8_t)req_cnt;
+
+ wmb();
+
+ /* Adjust ring index. */
+ ha->req_ring_index++;
+ if (ha->req_ring_index == ha->request_q_length) {
+ ha->req_ring_index = 0;
+ ha->request_ring_ptr = ha->request_ring;
+ } else
+ ha->request_ring_ptr++;
+
+ sp->flags |= SRB_DMA_VALID;
+ sp->state = SRB_ACTIVE_STATE;
+
+ /* Set chip new ring index. */
+ WRT_REG_DWORD(®->req_q_in, ha->req_ring_index);
+ RD_REG_DWORD_RELAXED(®->req_q_in); /* PCI Posting. */
+
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+ return QLA_SUCCESS;
+
+queuing_error:
+ if (cmd->use_sg && tot_dsds) {
+ sg = (struct scatterlist *) cmd->request_buffer;
+ pci_unmap_sg(ha->pdev, sg, cmd->use_sg,
+ cmd->sc_data_direction);
+ } else if (tot_dsds) {
+ pci_unmap_single(ha->pdev, sp->dma_handle,
+ cmd->request_bufflen, cmd->sc_data_direction);
+ }
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+ return QLA_FUNCTION_FAILED;
}
------------
--
Andrew Vasquez
next prev parent reply other threads:[~2005-06-14 5:32 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-06-14 5:31 [PATCH 0/11] qla2xxx: Add ISP24xx support Andrew Vasquez
2005-06-14 5:31 ` [PATCH 1/11] qla2xxx: Add ISP24xx definitions Andrew Vasquez
2005-06-14 21:50 ` Christoph Hellwig
2005-06-21 18:23 ` Andrew Vasquez
2005-06-14 5:31 ` [PATCH 2/11] qla2xxx: Add ISP24xx diagnostic routines Andrew Vasquez
2005-06-14 5:31 ` [PATCH 3/11] qla2xxx: Generalize SNS generic-services routines Andrew Vasquez
2005-06-14 21:50 ` Christoph Hellwig
2005-06-14 5:31 ` [PATCH 4/11] qla2xxx: Add MBX command routines for ISP24xx support Andrew Vasquez
2005-06-14 21:50 ` Christoph Hellwig
2005-06-14 5:32 ` [PATCH 5/11] qla2xxx: Add ISP24xx flash-manipulation routines Andrew Vasquez
2005-06-14 5:32 ` Andrew Vasquez [this message]
2005-06-14 21:50 ` [PATCH 6/11] qla2xxx: Add ISP24xx IOCB manipulation routines Christoph Hellwig
2005-06-14 5:32 ` [PATCH 7/11] qla2xxx: ISP24xx ISR routines Andrew Vasquez
2005-06-14 5:32 ` [PATCH 8/11] qla2xxx: Final glue-code for ISP24xx Andrew Vasquez
2005-06-14 21:50 ` Christoph Hellwig
2005-06-14 5:32 ` [PATCH 9/11] qla2xxx: NVRAM id-list updates Andrew Vasquez
2005-06-14 5:32 ` [PATCH 10/11] qla2xxx: Code scrubbing Andrew Vasquez
2005-06-14 5:32 ` [PATCH 11/11] qla2xxx: Firmware updates Andrew Vasquez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050614053207.12127.3402.sendpatchset@plap.qlogic.com \
--to=andrew.vasquez@qlogic.com \
--cc=James.Bottomley@SteelEye.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox