From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?iso-8859-1?Q?Rog=E9rio?= Brito Subject: Re: changes to ieee1394/sbp2 outside of linux1394.org Date: Sat, 16 Jul 2005 13:42:02 -0300 Message-ID: <20050716164202.GA3846@ime.usp.br> References: <1120926901.5008.12.camel@mulgrave> <200507091656.j69GuP5Y028863@einhorn.in-berlin.de> <20050715005309.GB14816@ime.usp.br> <20050715014312.GI13229@phunnypharm.org> <20050715155332.GA3954@ime.usp.br> <20050715172854.GJ13229@phunnypharm.org> <20050715185034.GA3903@ime.usp.br> <20050715205741.GN13229@phunnypharm.org> <20050716014225.GA9733@ime.usp.br> <20050716155637.GA22044@phunnypharm.org> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from smtpout1.uol.com.br ([200.221.4.192]:37026 "EHLO smtp.uol.com.br") by vger.kernel.org with ESMTP id S261662AbVGPQmH (ORCPT ); Sat, 16 Jul 2005 12:42:07 -0400 Received: from dumont.rtb.ath.cx (unknown [200.221.104.251]) by scorpion1.uol.com.br (Postfix) with ESMTP id 88E937F15 for ; Sat, 16 Jul 2005 13:42:03 -0300 (BRT) Content-Disposition: inline In-Reply-To: <20050716155637.GA22044@phunnypharm.org> Sender: linux-scsi-owner@vger.kernel.org List-Id: linux-scsi@vger.kernel.org To: Ben Collins Cc: Stefan Richter , linux-scsi@vger.kernel.org, linux1394-devel@lists.sourceforge.net, James.Bottomley@SteelEye.com, arjan@infradead.org Hi, Ben, Stefan and co. On Jul 16 2005, Ben Collins wrote: > From your last dmesg, it appears that things are in fact working. >=20 > Are you sure that you just don't need to do modprobe sd_mod? You are right. I just modprobe'd sd_mod by hand and the device was recognized: - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -= - - ieee1394: Initialized config rom entry `ip1394' ohci1394: $Rev: 1313 $ Ben Collins PCI: Found IRQ 5 for device 0000:00:0a.0 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=3D[5] MMIO=3D[db800000-db= 8007ff] Max Packet=3D[2048] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011066645555ead] eth1394: $Rev: 1312 $ Ben Collins eth1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 eth1: link up, 10Mbps, half-duplex, lpa 0x0000 ieee1394: Node added: ID:BUS[0-00:1023] GUID[0050c501e00010e8] ieee1394: Node changed: 0-00:1023 -> 0-01:1023 SCSI subsystem initialized sbp2: $Rev: 1311 $ Ben Collins scsi0 : SCSI emulation for IEEE-1394 SBP-2 Devices ieee1394: sbp2: Logged into SBP-2 device ieee1394: Node 0-00:1023: Max speed [S400] - Max payload [2048] Vendor: ST316002 Model: 1A Rev: 3.06 Type: Unknown ANSI SCSI revision: 06 SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sda: drive cache: write back SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sda: drive cache: write back sda: [mac] sda1 sda2 sda3 sda4 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -= - - I had to load sd_mod by hand, though. The hotplug scripts didn't load i= t this time. Hope this helps, Rog=E9rio. --=20 Rog=E9rio Brito : rbrito@ime.usp.br : http://www.ime.usp.br/~rbrito Homepage of the algorithms package : http://algorithms.berlios.de Homepage on freshmeat: http://freshmeat.net/projects/algorithms/ - To unsubscribe from this list: send the line "unsubscribe linux-scsi" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html