From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ravikiran G Thirumalai Subject: Re: adp94xx driver for 2.6.13? Date: Wed, 31 Aug 2005 17:38:00 -0700 Message-ID: <20050901003800.GA3666@localhost.localdomain> References: <20050831053318.GA3556@localhost.localdomain> <1125518912.4617.41.camel@mulgrave> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from serv01.siteground.net ([70.85.91.68]:41358 "EHLO serv01.siteground.net") by vger.kernel.org with ESMTP id S965008AbVIAAh3 (ORCPT ); Wed, 31 Aug 2005 20:37:29 -0400 Content-Disposition: inline In-Reply-To: <1125518912.4617.41.camel@mulgrave> Sender: linux-scsi-owner@vger.kernel.org List-Id: linux-scsi@vger.kernel.org To: James Bottomley Cc: SCSI Mailing List On Wed, Aug 31, 2005 at 04:08:32PM -0400, James Bottomley wrote: > On Tue, 2005-08-30 at 22:33 -0700, Ravikiran G Thirumalai wrote: > > Are drivers/sources available for Adaptec's AIC-94XX SAS controllers > > someplace? I am trying to run 2.6.13 on a x460. Any pointers to the latest > > driver sources appreciated. > > There is no driver source for Adaptec SATA hardware. You need to get > the latest binary drivers from Adaptec support. Someone from adaptec had posted the sources to linux-scsi some time back, but unfortunately, it is a humongous 27 patch patchset, with some malformed patches. Also one of the patches is missing (#6 ,or the patch numbering was bad). So I was wondering if folks from adaptec or other people stuck with this adapter could point me to the sources, if it is available... Thanks, Kiran