From: Nathan Lynch <ntl@pobox.com>
To: linux-kernel@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Subject: slab corruption in block layer during ipr_probe (2.6.15-rc5)
Date: Sun, 11 Dec 2005 14:37:40 -0500 [thread overview]
Message-ID: <20051211193740.GA3180@localhost.localdomain> (raw)
Seeing a flurry of slab corruption messages during ipr probe on a
Power5 system. Been a while since I tested on this box, so I'm not
sure when this started. I'll try to narrow it down in the meantime.
Since the messages are so numerous that the log buffer wraps, I
modified check_poison_obj to dump_stack on the first detection of
corruption and captured the following:
Linux version 2.6.15-rc5-ge4f5c82a (nathanl@zippy) (gcc version 3.3.2) #14 SMP PREEMPT Sun Dec 11 12:30:16 CST 2005
<snip>
ipr: IBM Power RAID SCSI Device Driver version: 2.1.0 (October 31, 2005)
ipr 0001:d0:01.0: Found IOA with IRQ: 167
ipr 0001:d0:01.0: Starting IOA initialization sequence.
ipr 0001:d0:01.0: Adapter firmware version: 020A005C
ipr 0001:d0:01.0: IOA initialized.
scsi0 : IBM 570B Storage Adapter
Slab corruption: start=c000000007650340, len=728
Redzone: 0x5a2cf071/0x5a2cf071.
Last user: [<c000000000227cd8>](.blk_cleanup_queue+0x98/0xd8)
1d0: 6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 00 00 00 00
2b0: 6b 6b 6b 6a 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
Prev obj: start=c000000007650050, len=728
Redzone: 0x5a2cf071/0x5a2cf071.
Last user: [<0000000000000000>](0x0)
000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
Next obj: start=c000000007650630, len=728
Redzone: 0x170fc2a5/0x170fc2a5.
Last user: [<c000000000227e7c>](.blk_alloc_queue_node+0x2c/0x90)
000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Call Trace:
[C00000009FF52E70] [C000000000028464] .show_stack+0x5c/0x1cc (unreliable)
[C00000009FF52F20] [C0000000000A04B4] .check_poison_obj+0x1e0/0x2a8
[C00000009FF52FE0] [C0000000000A2AE4] .cache_alloc_debugcheck_after+0x1b8/0x1d0
[C00000009FF53080] [C0000000000A3528] .kmem_cache_alloc_node+0x21c/0x26c
[C00000009FF53120] [C000000000227E7C] .blk_alloc_queue_node+0x2c/0x90
[C00000009FF531A0] [C000000000227F44] .blk_init_queue_node+0x3c/0x180
[C00000009FF53260] [C000000000227EF4] .blk_init_queue+0x14/0x28
[C00000009FF532E0] [C000000000367FD4] .scsi_alloc_queue+0x30/0x158
[C00000009FF53370] [C000000000368DFC] .scsi_alloc_sdev+0x178/0x298
[C00000009FF53460] [C000000000369EC0] .scsi_probe_and_add_lun+0x2b0/0x2c4
[C00000009FF53530] [C00000000036AB04] .__scsi_scan_target+0x124/0x170
[C00000009FF535E0] [C00000000036AD54] .scsi_scan_channel+0xb0/0xec
[C00000009FF53680] [C00000000036AEB8] .scsi_scan_host_selected+0x128/0x1a4
[C00000009FF53730] [C00000000038F094] .ipr_probe+0x108/0x160
[C00000009FF537D0] [C00000000024A778] .pci_call_probe+0x7c/0xd8
[C00000009FF53860] [C00000000024A84C] .__pci_device_probe+0x78/0x90
[C00000009FF538E0] [C00000000024A89C] .pci_device_probe+0x38/0x70
[C00000009FF53970] [C0000000002BF8B4] .driver_probe_device+0x70/0x124
[C00000009FF53A00] [C0000000002BFB34] .__driver_attach+0xd0/0xe0
[C00000009FF53A90] [C0000000002BEA50] .bus_for_each_dev+0x8c/0xcc
[C00000009FF53B50] [C0000000002BFB6C] .driver_attach+0x28/0x40
[C00000009FF53BD0] [C0000000002BF1C4] .bus_add_driver+0xc8/0x11c
[C00000009FF53C70] [C0000000002C0240] .driver_register+0x70/0x94
[C00000009FF53D30] [C00000000024AD04] .__pci_register_driver+0xa0/0xf8
[C00000009FF53DF0] [C000000000614704] .ipr_init+0x34/0x4c
[C00000009FF53E70] [C0000000005E9B14] .do_initcalls+0x64/0x120
[C00000009FF53F00] [C000000000009328] .init+0x90/0x248
[C00000009FF53F90] [C00000000002D5A0] .kernel_thread+0x4c/0x68
Vendor: IBM Model: VSBPD4E1 U4SCSI Rev: 4770
Type: Enclosure ANSI SCSI revision: 02
Vendor: IBM H0 Model: HUS103036FL3800 Rev: RPQF
Type: Direct-Access ANSI SCSI revision: 04
Vendor: IBM H0 Model: HUS103036FL3800 Rev: RPQF
Type: Direct-Access ANSI SCSI revision: 04
Vendor: IBM H0 Model: HUS103036FL3800 Rev: RPQF
Type: Direct-Access ANSI SCSI revision: 04
Vendor: IBM H0 Model: HUS103036FL3800 Rev: RPQF
Type: Direct-Access ANSI SCSI revision: 04
Vendor: IBM Model: VSBPD4E1 U4SCSI Rev: 4770
Type: Enclosure ANSI SCSI revision: 02
scsi: unknown device type 31
Vendor: IBM Model: 570B001 Rev: 0150
Type: Unknown ANSI SCSI revision: 00
vio_register_driver: driver ibmvscsi registering
libata version 1.20 loaded.
reply other threads:[~2005-12-11 19:37 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20051211193740.GA3180@localhost.localdomain \
--to=ntl@pobox.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox