Re: Bug#380272: kernel-image-2.6-686-smp: cpqarray module fails to detect arrays

[maximilian attems <maks@sternwelten.at>]

hello joshua,

thanks for your followups,
had time again to look at your bug report.

the trouble is quite shown in the troublesome dmesg and
in the working cat /proc/modules.

On Sun, 30 Jul 2006, Joshua Rubin wrote:

> I just tried installing etch with the beta2 installer. This system loaded the 
> floppy module before the cpqarray module, yet could not find the arrays 
> either. Still, the sarge system upgraded to etch works fine with the floppy 
> module loaded in the initramfs.

adding the floppy seems to kick sym53c8xx at loading later:

> ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 19 (level, low) -> IRQ 177
> sym53c8xx 0000:00:01.0: device not supported
> ACPI: PCI interrupt for device 0000:00:01.0 disabled
> Compaq SMART2 Driver (v 2.6.0)
> cpqarray: Device 0x10 has been found at bus 0 dev 1 func 0
> ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 19 (level, low) -> IRQ 177
> cpqarray: Finding drives on ida0<4>cpqarray ida0: idaSendPciCmd Timeout out,

see sym53c8xx disables your interrupt for cpqarray.
try my theory and use instead of floppy:
echo cpqarray > /etc/initramfs-tools/modules
regenerate initramfs with update-initramfs -u.
plese post the resulting dmesg.

adding linux-scsi and Matthew Wilcox to cc.


best regards

-- 
maks