From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arkadiusz Miskiewicz Subject: Re: qlogic 2312 problems on 2.6.16.22, 2.6.18rc4 Date: Wed, 16 Aug 2006 23:10:26 +0200 Message-ID: <200608162310.26541.arekm@pld-linux.org> References: <200608140946.50411.arekm@pld-linux.org> <200608151429.09082.arekm@pld-linux.org> <20060816181445.GU3674@andrew-vasquezs-computer.local> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-2 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from outgoing3.smtp.agnat.pl ([193.239.44.85]:54740 "EHLO outgoing3.smtp.agnat.pl") by vger.kernel.org with ESMTP id S932228AbWHPVKi convert rfc822-to-8bit (ORCPT ); Wed, 16 Aug 2006 17:10:38 -0400 In-Reply-To: <20060816181445.GU3674@andrew-vasquezs-computer.local> Content-Disposition: inline Sender: linux-scsi-owner@vger.kernel.org List-Id: linux-scsi@vger.kernel.org To: Andrew Vasquez Cc: linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org On Wednesday 16 August 2006 20:14, Andrew Vasquez wrote: > > Everything works fine on 32-bit dual xeon machine with card inserte= d into > > PCI slot. Here in new dual core opteron machine the card sits in PC= I-X > > slot. It's Thunder K8SRE S2891 mainboard, Transport GT24 B2891 1U > > barebone, Tyan M2075 riser card, 2 x Opteron 270, 6GB ram. > > Have you ruled out motherboard/memory issues? We've run 23xx and 24x= x > boards on a variety of AMD64 motherboards with more than 4GB of > memory. Not exactly. I have three such servers (the same board, cpu, ram). One of these has PCI-E scsi raid controller and works without any probl= em.=20 Second one (which I'm using for testing) has Adaptec SCSI controller=20 in Tyan specific TARRO slot (which afaik sits on the same PCI-X bus as = PCI-X slot). I had an array on that adaptec for some time and there were no problems= =2E The second one also got own qlogic 2312 card. Third machine has other qlogic 2312 card and I tried it two times, too - the same issues observed. So mainboards and memory should be fine but I guess there is possibilit= y that PCI-X slot is somehow broken there. I'll test that in several week= s (unfortunately I have no physical access to these now) by putting some typical scsi controller into that pci-x slot. > > Note that booting with 32-bit kernel (which works fine on Xeon syst= em) > > doesn't cure the problem on Opteron system. Booting 64bit 2.6.18rc4 > > kernel with mem=3D3G also doesn't fix anything. > > Hmm... Can you send your dmesg output post boot and driver load? dmesg and lspci -vvv attached. There is one thing that worries me: QLogic QLA2340 -=20 ISP2312: PCI-X (133 MHz) @ 0000:09:08.0 hdma+, host#=3D0, fw=3D3.03.2= 0 IPX Why it's showing 133MHz here?=20 Tyan manual ftp://ftp.tyan.com/manuals/m_s2891_100.pdf says on page 4 ,,One PCI-X 100MHz slot (PCI-X B)''. Hm, while looking at that manual I see that on page 13 it says ,,one pc= i-x 100MHz device''. Maybe that's the problem since I didn't remove Adaptec TARO controller.= I should be able to get this tested again without adaptec sooner than several weeks. Maybe = I misunderstand what documentation says here. Anyway still don't know why driver displays 133Mhz while manual says ab= out 100MHz one pci-x slot. > > /t is on tmpfs, /dev/sda2 in on FC array. Reading the same data sev= eral > > times and I get different md5sum results each time, see below. > > > > How I can track where corruption occurs? I started dd'ing text file onto /dev/sda2, then back to tmpfs and diffi= ng these. Corruption is one byte, several not corrupted bytes and again one corrupted byte. = Some regular pattern. > > Regards, > Andrew Vasquez Bootdata ok (command line is initrd=3D/initrd-test.gz init=3D/linuxrc r= oot=3D/dev/ram0 ramdisk_size=3D54000 console=3Dtty0 console=3DttyS0,115= 200n81 panic=3D60 BOOT_IMAGE=3Dvmlinuz-test ip=3D192.168.0.127:192.168.= 0.1:192.168.0.1:255.255.255.0 ) Linux version 2.6.18-rc4-dirty (root@db01new) (gcc version 3.3.6 (PLD L= inux)) #7 Wed Aug 16 22:43:23 CEST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009c400 (usable) BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ff90000 (usable) BIOS-e820: 000000007ff90000 - 000000007ff99000 (ACPI data) BIOS-e820: 000000007ff99000 - 0000000080000000 (ACPI NVS) BIOS-e820: 0000000080000000 - 00000000bff80000 (usable) BIOS-e820: 00000000bff80000 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000e8000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 00000001c0000000 (usable) DMI present. ACPI: RSDP (v000 PTLTD ) @ 0x0000000000= 0f7040 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x000000= 007ff95407 ACPI: FADT (v001 NVIDIA CK8S 0x06040000 PTL_ 0x000f4240) @ 0x000000= 007ff98d72 ACPI: SRAT (v001 AMD HAMMER 0x06040000 AMD 0x00000001) @ 0x000000= 007ff98de6 ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0x000000= 007ff98ef6 ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x000000= 007ff98f46 ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x000000= 007ff98fd8 ACPI: DSDT (v001 NVIDIA CK8 0x06040000 MSFT 0x0100000e) @ 0x000000= 0000000000 On node 0 totalpages: 1545657 DMA zone: 2161 pages, LIFO batch:0 DMA32 zone: 767816 pages, LIFO batch:31 Normal zone: 775680 pages, LIFO batch:31 Nvidia board detected. Ignoring ACPI timer override. ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:1 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 15:1 APIC version 16 WARNING: NR_CPUS limit of 1 reached. Processor ignored. ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) Processor #2 15:1 APIC version 16 WARNING: NR_CPUS limit of 1 reached. Processor ignored. ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) Processor #3 15:1 APIC version 16 WARNING: NR_CPUS limit of 1 reached. Processor ignored. ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x05] address[0xdf200000] gsi_base[24]) IOAPIC[1]: apic_id 5, version 17, address 0xdf200000, GSI 24-27 ACPI: IOAPIC (id[0x06] address[0xdf201000] gsi_base[28]) IOAPIC[2]: apic_id 6, version 17, address 0xdf201000, GSI 28-31 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) Built 1 zonelists. Total pages: 1545657 Kernel command line: initrd=3D/initrd-test.gz init=3D/linuxrc root=3D/d= ev/ram0 ramdisk_size=3D54000 console=3Dtty0 console=3DttyS0,115200n81 p= anic=3D60 BOOT_IMAGE=3Dvmlinuz-test ip=3D192.168.0.127:192.168.0.1:192.= 168.0.1:255.255.255.0=20 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. time.c: Detected 2009.273 MHz processor. Console: colour VGA+ 80x25 Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molna= r =2E.. MAX_LOCKDEP_SUBCLASSES: 8 =2E.. MAX_LOCK_DEPTH: 30 =2E.. MAX_LOCKDEP_KEYS: 2048 =2E.. CLASSHASH_SIZE: 1024 =2E.. MAX_LOCKDEP_ENTRIES: 8192 =2E.. MAX_LOCKDEP_CHAINS: 8192 =2E.. CHAINHASH_SIZE: 4096 memory used by lock dependency info: 1120 kB per task-struct memory footprint: 1680 bytes Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Checking aperture... CPU 0: aperture @ c0000000 size 256 MB CPU 1: aperture @ c0000000 size 256 MB Memory: 6168496k/7340032k available (2114k kernel code, 121284k reserve= d, 1130k data, 192k init) Calibrating delay using timer specific routine.. 4021.70 BogoMIPS (lpj=3D= 8043410) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Dual Core AMD Opteron(tm) Processor 270 stepping 02 ACPI: Core revision 20060707 Using local APIC timer interrupts. result 12557973 Detected 12.557 MHz APIC timer. testing NMI watchdog ... OK. checking if image is initramfs...it isn't (no cpio magic); looks like a= n initrd =46reeing initrd memory: 780k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Boot video device is 0000:01:07.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19) *0 ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19) *0 ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19) *0 ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [LSI1] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Root Bridge [PCI2] (0000:08) PCI: Probing PCI hardware (bus 08) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.G0PA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.G0PB._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 15 devices PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=3Drouteirq". If it helps, post= a report PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ c0000000 size 262144 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 256MB of IOMMU area in the AGP aperture pnp: 00:08: ioport range 0x8000-0x807f could not be reserved pnp: 00:08: ioport range 0x8080-0x80ff has been reserved pnp: 00:08: ioport range 0x8400-0x847f has been reserved pnp: 00:08: ioport range 0x8480-0x84ff has been reserved pnp: 00:08: ioport range 0x8800-0x887f has been reserved pnp: 00:08: ioport range 0x8880-0x88ff has been reserved pnp: 00:08: ioport range 0x5000-0x503f has been reserved pnp: 00:08: ioport range 0x5040-0x507f has been reserved PCI: Bridge: 0000:00:09.0 IO window: 2000-2fff MEM window: dd100000-deffffff PREFETCH window: c2000000-c20fffff PCI: Bridge: 0000:00:0e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 PCI: Bridge: 0000:08:0a.0 IO window: 3000-3fff MEM window: df300000-df3fffff PREFETCH window: c2100000-c21fffff PCI: Bridge: 0000:08:0b.0 IO window: disabled. MEM window: df400000-df4fffff PREFETCH window: disabled. NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 32768 (order: 9, 2359296 bytes) TCP bind hash table entries: 16384 (order: 8, 1310720 bytes) TCP: Hash tables configured (established 32768 bind 16384) TCP reno registered Simple Boot Flag at 0x36 set to 0x1 audit: initializing netlink socket (disabled) audit(1155768349.728:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for subordinate bus. PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for subordinate bus. PCI: Setting latency timer of device 0000:00:0e.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enable= d serial8250: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq =3D 3) is a 16550A 00:02: ttyS1 at I/O 0x2f8 (irq =3D 3) is a 16550A 00:03: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 54000K size 1024 blocksize PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S1 S4 S5) IP-Config: No network devices available. RAMDISK: Compressed image found at block 0 VFS: Mounted root (romfs filesystem) readonly. =46reeing unused kernel memory: 192k freed tg3.c:v3.64 (July 31, 2006) GSI 16 sharing vector 0xC1 and IRQ 16 ACPI: PCI Interrupt 0000:0a:09.0[A] -> GSI 28 (level, low) -> IRQ 193 eth0: Tigon3 [partno(BCM95704) rev 2003 PHY(5704)] (PCIX:133MHz:64-bit)= 10/100/1000BaseT Ethernet 00:e0:81:33:5e:ae eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TS= Ocap[0]=20 eth0: dma_rwctrl[769f4000] dma_mask[64-bit] GSI 17 sharing vector 0xC9 and IRQ 17 ACPI: PCI Interrupt 0000:0a:09.1[B] -> GSI 29 (level, low) -> IRQ 201 eth1: Tigon3 [partno(BCM95704) rev 2003 PHY(5704)] (PCIX:133MHz:64-bit)= 10/100/1000BaseT Ethernet 00:e0:81:33:5e:af eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TS= Ocap[1]=20 eth1: dma_rwctrl[769f4000] dma_mask[64-bit] PM: Writing back config space on device 0000:0a:09.0 at offset 3 (was 8= 04000, writing 804010) PM: Writing back config space on device 0000:0a:09.0 at offset 2 (was 2= 000000, writing 2000003) PM: Writing back config space on device 0000:0a:09.0 at offset 1 (was 2= b00000, writing 2b00106) tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is off for TX and off for RX. NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present SCSI subsystem initialized QLogic Fibre Channel HBA Driver GSI 18 sharing vector 0xD1 and IRQ 18 ACPI: PCI Interrupt 0000:09:08.0[A] -> GSI 24 (level, low) -> IRQ 209 qla2xxx 0000:09:08.0: Found an ISP2312, irq 209, iobase 0xffffc20000004= 000 qla2xxx 0000:09:08.0: Configuring PCI space... qla2xxx 0000:09:08.0: Configure NVRAM parameters... qla2xxx 0000:09:08.0: Verifying loaded RISC code... scsi(0): **** Load RISC code **** scsi(0): Verifying Checksum of loaded RISC code. scsi(0): Checksum OK, start firmware. qla2xxx 0000:09:08.0: Allocated (412 KB) for firmware dump... scsi(0): Issue init firmware. scsi(0): Asynchronous LIP RESET (f7f7). qla2xxx 0000:09:08.0: LIP reset occured (f7f7). qla2xxx 0000:09:08.0: Waiting for LIP to complete... scsi(0): Asynchronous P2P MODE received. scsi(0): Asynchronous LOOP UP (2 Gbps). qla2xxx 0000:09:08.0: LOOP UP detected (2 Gbps). scsi(0): Asynchronous PORT UPDATE. scsi(0): Port database changed ffff 0006 0000. scsi(0): F/W Ready - OK=20 scsi(0): fw_state=3D3 curr time=3Dffff0467. qla2xxx 0000:09:08.0: Topology - (F_Port), Host Loop address 0xffff scsi(0): Configure loop -- dpc flags =3D0x4080040 scsi(0): RSCN queue entry[0] =3D [00/000000]. scsi(0): device_resync: rscn overflow. scsi(0): RFT_ID exiting normally. scsi(0): RFF_ID exiting normally. scsi(0): RNN_ID exiting normally. scsi(0): RSNN_NN exiting normally. scsi(0): Asynchronous PORT UPDATE ignored 0000/0006/bd92. scsi(0): GID_PT entry - nn 500508b300917e50 pn 500508b300917e51 portid=3D= 010000. scsi(0): GID_PT entry - nn 200000e08b8051d6 pn 210000e08b8051d6 portid=3D= 010100. scsi(0): GID_PT entry - nn 200000e08b950428 pn 210000e08b950428 portid=3D= 010200. scsi(0): device wrap (010200) scsi(0): Trying Fabric Login w/loop id 0x0081 for port 010000. scsi(0): Trying Fabric Login w/loop id 0x0082 for port 010100. qla2x00_mailbox_command(0): **** FAILED. mbx0=3D4007, mbx1=3D0, mbx2=3D= 100, cmd=3D6f **** qla2x00_login_fabric(0): failed=3D102 mb[0]=3D4007 mb[1]=3D0 mb[2]=3D10= 0. =46abric Login: port in use - next loop id=3D0x0000, port Id=3D010100. scsi(0): Trying Fabric Login w/loop id 0x0000 for port 010100. scsi(0): LOOP READY DEBUG: detect hba 0 at address =3D ffff8101bd9807e0 scsi0 : qla2xxx qla2xxx 0000:09:08.0:=20 QLogic Fibre Channel HBA Driver: 8.01.05-k3 QLogic QLA2340 -=20 ISP2312: PCI-X (133 MHz) @ 0000:09:08.0 hdma+, host#=3D0, fw=3D3.03.2= 0 IPX Vendor: COMPAQ Model: MSA1000 Rev: 4.96 Type: RAID ANSI SCSI revision: 04 Vendor: COMPAQ Model: MSA1000 VOLUME Rev: 4.96 Type: Direct-Access ANSI SCSI revision: 04 Vendor: COMPAQ Model: MSA1000 VOLUME Rev: 4.96 Type: Direct-Access ANSI SCSI revision: 04 scsi(0): Asynchronous PORT UPDATE ignored 0001/0006/bd92. scsi(0): Asynchronous PORT UPDATE ignored 0001/0007/bd92. scsi(0): Asynchronous PORT UPDATE ignored 0001/0004/bd92. SCSI device sda: 513790830 512-byte hdwr sectors (263061 MB) sda: Write Protect is off sda: Mode Sense: 83 00 00 08 SCSI device sda: drive cache: write back SCSI device sda: 513790830 512-byte hdwr sectors (263061 MB) sda: Write Protect is off sda: Mode Sense: 83 00 00 08 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sd 0:0:0:2: Attached scsi disk sda SCSI device sdb: 1381590 512-byte hdwr sectors (707 MB) sdb: Write Protect is off sdb: Mode Sense: 83 00 00 08 SCSI device sdb: drive cache: write back SCSI device sdb: 1381590 512-byte hdwr sectors (707 MB) sdb: Write Protect is off sdb: Mode Sense: 83 00 00 08 SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 sdb: p2 exceeds device capacity sd 0:0:0:4: Attached scsi disk sdb 00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (= rev a3) Subsystem: Tyan Computer Unknown device 2891 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- St= epping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=3Dfast >TAbort- SERR- TAbort- SERR- 00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2) Subsystem: Tyan Computer Unknown device 2891 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- St= epping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=3Dfast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- 00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog= -if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- St= epping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA PME(D0+,D1+,D2+,D3hot+,D= 3cold+) Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=3D0/1 En= able+ Address: 00000000fee00000 Data: 40b9 Capabilities: [58] HyperTransport: MSI Mapping Capabilities: [80] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <512ns, L1 <4us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s, Port 0 Link: Latency L0s <512ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x16 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 0, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]= HyperTransport Technology Configuration Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- St= epping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [a0] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=3D133MHz Status: Dev=3D08:0a.0 64bit+ 133MHz+ SCD- USC- SCO- SRD- Upstream: Capacity=3D14 CommitmentLimit=3D65535 Downstream: Capacity=3D2 CommitmentLimit=3D65535 Capabilities: [b8] HyperTransport: Interrupt Discovery and Configurati= on Capabilities: [c0] HyperTransport: Slave or Primary Interface !!! Possibly incomplete decoding Command: BaseUnitID=3D10 UnitCnt=3D2 MastHost- DefDir- Link Control 0: CFlE- CST- CFE- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [a0] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=3D133MHz Status: Dev=3D08:0b.0 64bit+ 133MHz+ SCD- USC- SCO- SRD- Upstream: Capacity=3D14 CommitmentLimit=3D65535 Downstream: Capacity=3D2 CommitmentLimit=3D65535 Capabilities: [b8] HyperTransport: Interrupt Discovery and Configurati= on 08:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01= ) (prog-if 10 [IO-APIC]) Subsystem: Tyan Computer Unknown device 2891 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- St= epping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR-