From mboxrd@z Thu Jan 1 00:00:00 1970 From: Joshua Rubin Subject: Bug#380272: kernel-image-2.6-686-smp: cpqarray module fails to detect arrays Date: Fri, 18 Aug 2006 09:05:53 -0600 Message-ID: <200608180905.53645.joshua@rubixlinux.org> Mime-Version: 1.0 Content-Type: multipart/signed; boundary="nextPart1403443.dxuAH4CN2Z"; protocol="application/pgp-signature"; micalg=pgp-sha1 Content-Transfer-Encoding: 7bit Return-path: Received: from 70-89-161-115-Joshua-Rubin-co.hfc.comcastbusiness.net ([70.89.161.115]:20897 "EHLO smokescreen.cybertron.cc") by vger.kernel.org with ESMTP id S1030475AbWHRPGj (ORCPT ); Fri, 18 Aug 2006 11:06:39 -0400 Sender: linux-scsi-owner@vger.kernel.org List-Id: linux-scsi@vger.kernel.org To: 380272@bugs.debian.org Cc: maximilian attems , Matthew Wilcox , linux-scsi@vger.kernel.org --nextPart1403443.dxuAH4CN2Z Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Hi Maks, I can confirm that removing floppy from /etc/initramfs-tools/modules (which= =20 still causes a non-bootable system) and inserting cpqarray (which is the on= ly=20 uncommented module in /etc/initramfs-tools/modules) does in fact allow the= =20 system to boot. I have attached the dmesg and lsmod. Thanks again, Joshua Rubin Begin dmesg: ____________________________________ Linux version 2.6.16-2-686-smp (Debian 2.6.16-17) (waldi@debian.org) (gcc=20 version 4.0.4 20060630 (prerelease) (Debian 4.0.3-4)) #1 SMP Sat Jul 15=20 22:33:00 UTC 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fffc000 (usable) BIOS-e820: 000000000fffc000 - 0000000010000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 255MB LOWMEM available. found SMP MP-table at 000f4ff0 On node 0 totalpages: 65532 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 61436 pages, LIFO batch:15 HighMem zone: 0 pages, LIFO batch:0 DMI 2.3 present. ACPI: RSDP (v000 COMPAQ ) @ 0x000f4f90 ACPI: RSDT (v001 COMPAQ MICRO 0x00000002 =D2=04 0x0000162e) @ 0x0fffc000 ACPI: FADT (v001 COMPAQ MICRO 0x00000002 =D2=04 0x0000162e) @ 0x0fffc040 ACPI: MADT (v001 COMPAQ 00000083 0x00000002 0x00000000) @ 0x0fffc100 ACPI: SSDT (v001 COMPAQ SSDT 0x00000001 MSFT 0x0100000b) @ 0x0ffff800 ACPI: DSDT (v001 COMPAQ DSDT 0x00000001 MSFT 0x0100000b) @ 0x00000000 ACPI: PM-Timer IO Port: 0x240 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:8 APIC version 17 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) Processor #3 6:8 APIC version 17 ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-34 ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 20000000 (gap: 10000000:eec00000) Built 1 zonelists Kernel command line: root=3D/dev/ida/c0d0p1 ro=20 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 1024 (order: 10, 16384 bytes) Detected 997.113 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 251936k/262128k available (1505k kernel code, 9532k reserved, 545k= =20 data, 176k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 2003.87 BogoMIPS=20 (lpj=3D4007752) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000=20 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 00000= 000=20 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000=20 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. CPU0: Intel Pentium III (Coppermine) stepping 06 Booting processor 1/0 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 1993.85 BogoMIPS=20 (lpj=3D3987713) CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000=20 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 00000= 000=20 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000=20 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Pentium III (Coppermine) stepping 06 Total of 2 processors activated (3997.73 BogoMIPS). ENABLING IO-APIC IRQs =2E.TIMER: vector=3D0x31 apic1=3D0 pin1=3D0 apic2=3D-1 pin2=3D-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=3D4000 checking if image is initramfs... it is =46reeing initrd memory: 4287k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf0094, last bus=3D3 PCI: Using configuration type 1 mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:03.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Root Bridge [PCI1] (0000:03) PCI: Probing PCI hardware (bus 03) ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT] ACPI: PCI Interrupt Link [FAKE] (IRQs) *0, disabled. ACPI: PCI Interrupt Link [INA0] (IRQs 5 10 11 15) *0, disabled. ACPI: PCI Interrupt Link [INA1] (IRQs 5 10 11 15) *0, disabled. ACPI: PCI Interrupt Link [ITR0] (IRQs 5 10 11 15) *0, disabled. ACPI: PCI Interrupt Link [ITR1] (IRQs 5 *10 11 15) ACPI: PCI Interrupt Link [ITR2] (IRQs 5 10 11 15) *0, disabled. ACPI: PCI Interrupt Link [ITR3] (IRQs 5 10 11 15) *7 ACPI: PCI Interrupt Link [ITR4] (IRQs 5 10 *11 15) ACPI: PCI Interrupt Link [INB0] (IRQs 5 10 11 15) *0, disabled. ACPI: PCI Interrupt Link [INB1] (IRQs 5 10 11 15) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 10 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=3Drouteirq". If it helps, post a r= eport PCI: Device 0000:00:00.0 not found by BIOS PCI: Device 0000:00:00.1 not found by BIOS PCI: Device 0000:00:0f.0 not found by BIOS pnp: 00:01: ioport range 0xf50-0xf58 has been reserved audit: initializing netlink socket (disabled) audit(1155913049.052:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 Using IPI No-Shortcut mode ACPI wakeup devices:=20 ACPI: (supports S0 S4 S5) =46reeing unused kernel memory: 176k freed input: AT Translated Set 2 keyboard as /class/input/input0 Compaq SMART2 Driver (v 2.6.0) cpqarray: Device 0x10 has been found at bus 0 dev 1 func 0 ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 19 (level, low) -> IRQ 177 cpqarray: Finding drives on ida0 (Integrated Array) cpqarray ida/c0d0: blksz=3D512 nr_blks=3D17756160 cpqarray: Starting firmware's background processing ida/c0d0: p1 p2 < p5 p6 p7 p8 p9 > ACPI: Thermal Zone [THM0] (8 C) e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 17 (level, low) -> IRQ 185 e100: eth0: e100_probe: addr 0xc6fff000, irq 185, MAC addr 00:02:A5:8A:13:A8 ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 24 (level, low) -> IRQ 193 e100: eth1: e100_probe: addr 0xc6dff000, irq 193, MAC addr 00:02:A5:8A:13:A6 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=3D= xx SvrWks OSB4: IDE controller at PCI slot 0000:00:0f.1 SvrWks OSB4: chipset revision 0 SvrWks OSB4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x2800-0x2807, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x2808-0x280f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... Probing IDE interface ide1... hdc: CD-224E, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hdc: ATAPI 24X CD-ROM drive, 512kB Cache Uniform CD-ROM driver Revision: 3.20 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. =46loppy drive(s): fd0 is 1.44M =46DC 0 is a National Semiconductor PC87306 input: PC Speaker as /class/input/input1 Linux agpgart interface v0.101 (c) Dave Jones agpgart: unable to determine aperture size. agpgart: agp_backend_initialize() failed. agpgart-serverworks: probe of 0000:00:00.0 failed with error -22 agpgart: unable to determine aperture size. agpgart: agp_backend_initialize() failed. agpgart-serverworks: probe of 0000:00:00.1 failed with error -22 piix4_smbus 0000:00:0f.0: Found 0000:00:0f.0 device piix4_smbus 0000:00:0f.0: SMB base address uninitialized - upgrade BIOS or = use=20 force_addr=3D0xaddr Adding 473876k swap on /dev/ida/c0d0p7. Priority:-1 extents:1 across:47387= 6k EXT3 FS on ida/c0d0p1, internal journal Probing IDE interface ide0... device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3 FS on ida/c0d0p9, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on ida/c0d0p8, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on ida/c0d0p5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on ida/c0d0p6, internal journal EXT3-fs: mounted filesystem with ordered data mode. e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present ____________________________________ End dmesg Begin lsmod: ____________________________________ Module Size Used by ipv6 229184 16=20 nfs 193108 1=20 lockd 54952 2 nfs nfs_acl 3488 1 nfs sunrpc 136420 4 nfs,lockd,nfs_acl dm_mod 49204 0=20 ide_generic 1344 0 [permanent] ide_disk 14816 0=20 i2c_piix4 8368 0=20 i2c_core 19840 1 i2c_piix4 evdev 8992 0=20 sworks_agp 8832 0=20 psmouse 34696 0=20 agpgart 29864 1 sworks_agp pcspkr 3460 0=20 serio_raw 6916 0=20 floppy 57200 0=20 ext3 118152 5=20 jbd 51412 1 ext3 mbcache 8292 1 ext3 ide_cd 35936 0=20 cdrom 32304 1 ide_cd serverworks 8264 0 [permanent] generic 4388 0 [permanent] ide_core 113868 5=20 ide_generic,ide_disk,ide_cd,serverworks,generic e100 32356 0=20 mii 5280 1 e100 thermal 13288 0=20 processor 25896 1 thermal fan 4676 0=20 cpqarray 20868 7=20 ____________________________________ End lsmod --nextPart1403443.dxuAH4CN2Z Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (GNU/Linux) iD8DBQBE5ddRkKWMTL7MAq4RAqUpAKCR3X28I9OARiK53HMb9fhTflE9UACfUdbv D5HTjcu+vYyeSZldHgl0lrA= =QR6D -----END PGP SIGNATURE----- --nextPart1403443.dxuAH4CN2Z--