From: Joshua Rubin <joshua@rubixlinux.org>
To: 380272@bugs.debian.org
Cc: maximilian attems <maks@sternwelten.at>,
Matthew Wilcox <matthew@wil.cx>,
linux-scsi@vger.kernel.org, Kyle McMartin <kyle@parisc-linux.org>
Subject: Re: Bug#380272: kernel-image-2.6-686-smp: cpqarray module fails to detect arrays
Date: Fri, 18 Aug 2006 11:14:52 -0600 [thread overview]
Message-ID: <200608181114.52739.joshua@rubixlinux.org> (raw)
[-- Attachment #1: Type: text/plain, Size: 6264 bytes --]
Hi Maks,
I tried linux-image-2.6.17-2-686_2.6.17-6_i386.deb from unstable and the
problem still exists there.
I have attached the outputs of "lspci -vv" and "lspci -n".
Thanks,
Joshua Rubin
# lspci -vv
00:00.0 Host bridge: Broadcom CNB20LE Host Bridge (rev 05)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 64, Cache Line Size: 32 bytes
00:00.1 Host bridge: Broadcom CNB20LE Host Bridge (rev 05)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 32 bytes
00:01.0 RAID bus controller: LSI Logic / Symbios Logic 53C1510 (rev 02)
Subsystem: Compaq Computer Corporation Integrated Array Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 192 (7500ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 177
Region 0: I/O ports at 2000 [size=256]
Region 1: Memory at c5000000 (32-bit, non-prefetchable) [size=16M]
Region 2: Memory at c4000000 (32-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at 20000000 [disabled] [size=512K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:03.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC 215IIC
[Mach64 GT IIC] (rev 7a) (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc Rage IIC
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), Cache Line Size: 32 bytes
Region 0: Memory at c2000000 (32-bit, prefetchable) [size=16M]
Region 1: I/O ports at 2400 [size=256]
Region 2: Memory at c3fff000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 20080000 [disabled] [size=128K]
Capabilities: [5c] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.0 System peripheral: Compaq Computer Corporation Advanced System
Management Controller
Subsystem: Compaq Computer Corporation Unknown device b0f3
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 255
Region 0: I/O ports at 1800 [size=256]
Region 1: Memory at c3ffef00 (32-bit, non-prefetchable) [size=256]
00:0f.0 ISA bridge: Broadcom OSB4 South Bridge (rev 4f)
Subsystem: Broadcom OSB4 South Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:0f.1 IDE interface: Broadcom OSB4 IDE Controller (prog-if 8a [Master SecP
PriP])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at 2800 [size=16]
03:04.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100]
(rev 08)
Subsystem: Compaq Computer Corporation NC3163 Fast Ethernet NIC
(embedded, WOL)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 185
Region 0: Memory at c6fff000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 3000 [size=64]
Region 2: Memory at c6e00000 (32-bit, non-prefetchable) [size=1M]
[virtual] Expansion ROM at 20100000 [disabled] [size=1M]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
03:05.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100]
(rev 08)
Subsystem: Compaq Computer Corporation NC3163 Fast Ethernet NIC
(embedded, WOL)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 193
Region 0: Memory at c6dff000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 3040 [size=64]
Region 2: Memory at c6c00000 (32-bit, non-prefetchable) [size=1M]
[virtual] Expansion ROM at 20200000 [disabled] [size=1M]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
# lspci -n
00:00.0 0600: 1166:0009 (rev 05)
00:00.1 0600: 1166:0009 (rev 05)
00:01.0 0104: 1000:0010 (rev 02)
00:03.0 0300: 1002:4756 (rev 7a)
00:04.0 0880: 0e11:a0f0
00:0f.0 0601: 1166:0200 (rev 4f)
00:0f.1 0101: 1166:0211
03:04.0 0200: 8086:1229 (rev 08)
03:05.0 0200: 8086:1229 (rev 08)
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
next reply other threads:[~2006-08-18 17:15 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-08-18 17:14 Joshua Rubin [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-08-18 15:59 Bug#380272: kernel-image-2.6-686-smp: cpqarray module fails to detect arrays Joshua Rubin
2006-08-18 16:39 ` Kyle McMartin
2006-08-18 23:18 ` James Bottomley
2006-08-18 23:28 ` Kyle McMartin
2006-08-19 18:27 ` maximilian attems
2006-08-18 15:05 Joshua Rubin
2006-08-18 16:09 ` maximilian attems
2006-08-18 16:49 ` maximilian attems
2006-08-18 0:12 Joshua Rubin
[not found] <200607281800.59516.joshua@rubixlinux.org>
[not found] ` <200607301140.25691.joshua@rubixlinux.org>
[not found] ` <20060730200559.GO10814@baikonur.stro.at>
[not found] ` <200607301433.02983.joshua@rubixlinux.org>
2006-08-04 18:21 ` maximilian attems
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200608181114.52739.joshua@rubixlinux.org \
--to=joshua@rubixlinux.org \
--cc=380272@bugs.debian.org \
--cc=kyle@parisc-linux.org \
--cc=linux-scsi@vger.kernel.org \
--cc=maks@sternwelten.at \
--cc=matthew@wil.cx \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox