From: mmzz@stat.unipd.it (Alberto Cammozzo)
To: linux-scsi@vger.kernel.org
Subject: lp8000 and 2.6.18-rc6
Date: Sat, 9 Sep 2006 23:03:39 +0200 [thread overview]
Message-ID: <20060909210339.GB21263@stat.unipd.it> (raw)
Hello,
I have a problem with the Emulex LP8000 lpfc driver:
- the kernel module loads fine and reports 4 luns from the storage
(Clariion 4700), also listed in /proc/scsi/scsi, but
- there is no way to have a SCSI device attached (sdb, sdc, ...), even
runing rescan-scsi-bus. The disks are not listed with fdisk -l.
It's the first time I use this setup... Am I missing something?
Thank you for any help.
Alberto
Uname -a:
Linux novantatre 2.6.18-rc6 #1 SMP Sat Sep 9 09:46:54 CEST 2006 i686 GNU/Linux
lsmod:
Module Size Used by
lpfc 145600 0
scsi_transport_fc 25568 1 lpfc
iscsi_tcp 19808 1
libiscsi 17504 1 iscsi_tcp
scsi_transport_iscsi 23244 3 iscsi_tcp,libiscsi
skge 31312 0
[...]
>From dmesg:
Emulex LightPulse Fibre Channel SCSI driver 8.1.9
Copyright(c) 2004-2006 Emulex. All rights reserved.
PCI: Enabling device 0000:04:01.0 (0158 -> 015b)
ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 52 (level, low) -> IRQ 23
scsi6 : on PCI bus 04 device 08 irq 23
lpfc 0000:04:01.0: 0:1303 Link Up Event x1 received Data: x1 x1 x0 x0
Vendor: DGC Model: Rev: 0850
Type: Direct-Access ANSI SCSI revision: 04
Vendor: DGC Model: Rev: 0850
Type: Direct-Access ANSI SCSI revision: 04
Vendor: DGC Model: Rev: 0850
Type: Direct-Access ANSI SCSI revision: 04
Vendor: DGC Model: Rev: 0850
Type: Direct-Access ANSI SCSI revision: 04
from /proc/scsi/scsi:
Host: scsi6 Channel: 00 Id: 00 Lun: 00
Vendor: DGC Model: Rev: 0850
Type: Direct-Access ANSI SCSI revision: 04
Host: scsi6 Channel: 00 Id: 01 Lun: 00
Vendor: DGC Model: Rev: 0850
Type: Direct-Access ANSI SCSI revision: 04
Host: scsi6 Channel: 00 Id: 02 Lun: 00
Vendor: DGC Model: Rev: 0850
Type: Direct-Access ANSI SCSI revision: 04
Host: scsi6 Channel: 00 Id: 03 Lun: 00
Vendor: DGC Model: Rev: 0850
Type: Direct-Access ANSI SCSI revision: 04
--
Alberto Cammozzo
System/Network Manager
Universita` di Padova -IT
next reply other threads:[~2006-09-09 21:04 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-09-09 21:03 Alberto Cammozzo [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-09-09 21:08 lp8000 and 2.6.18-rc6 Alberto Cammozzo
2006-09-10 13:56 ` Matthew Wilcox
2006-09-10 21:04 ` Alberto Cammozzo
2006-09-11 1:06 ` Douglas Gilbert
2006-09-11 2:17 ` James Bottomley
2006-09-11 9:51 ` Alberto Cammozzo
2006-09-11 12:21 ` James Smart
2006-09-11 16:29 ` Alberto Cammozzo
2006-09-11 6:40 ` Alberto Cammozzo
2006-09-11 17:00 ` James Bottomley
2006-09-12 6:45 ` Alberto Cammozzo
2006-09-13 14:11 ` James Bottomley
2006-09-13 14:44 ` Douglas Gilbert
2006-09-13 15:20 ` James Bottomley
2006-09-13 15:33 ` Patrick Mansfield
2006-09-13 15:37 ` Alberto Cammozzo
2006-09-09 21:01 Alberto Cammozzo
2006-09-10 14:03 ` James Smart
2006-09-10 20:43 ` Alberto Cammozzo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060909210339.GB21263@stat.unipd.it \
--to=mmzz@stat.unipd.it \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox