Re: 2.6.18-mm2

Matthew Wilcox
2006-09-29T14:39:51Z

On Fri, Sep 29, 2006 at 03:57:38PM +0200, J.A. Magall??n wrote:
> aic7xxx oopses on boot:
>
> PCI: Setting latency timer of device 0000:00:0e.0 to 64
> IRQ handler type mismatch for IRQ 0

Of course, this isn't a scsi problem, it's a peecee hardware problem.
Or maybe a PCI subsystem problem. But it's clearly not aic7xxx's fault.

> PCI: Cannot allocate resource region 0 of device 0000:00:0e.0

That's not good. Might be part of the problem.

> PCI: Enabling device 0000:00:0e.0 (0000 -> 0003)
> PCI: No IRQ known for interrupt pin A of device 0000:00:0e.0. Probably buggy MP table.

This is the direct problem. You've got no irq.