From: Jaco van der Schyff <jvds@netgroup.co.za>
To: Michael Stone <mstone@mathom.us>
Cc: linux-scsi@vger.kernel.org
Subject: Re: aic79xx dumping card state
Date: Fri, 10 Nov 2006 17:01:26 +0200 [thread overview]
Message-ID: <20061110150126.GA8222@npjaco> (raw)
In-Reply-To: <20061110004508.GF2667@mathom.us>
On Thu, Nov 09, 2006 at 07:45:09PM -0500, Michael Stone wrote:
> >>>>>>>>>>>>>>>>>>Dump Card State Begins <<<<<<<<<<<<<<<<<
> scsi2: Dumping Card State at program address 0x3b Mode 0x22
> Card was paused
> INTSTAT[0x0] SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
> SCSISIGI[0x24]:(P_DATAOUT_DT|BSYI) SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x40]:(ENSELO) SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0]
> SEQ_FLAGS[0x0] SEQ_FLAGS2[0x4]:(SELECTOUT_QFROZEN) QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x10]:(SELINGO) SSTAT1[0x0]
> SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x80]:(PACKETIZED) LQOSTAT0[0x0] LQOSTAT1[0x0]
> LQOSTAT2[0x40]
> SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x3 NEXTSCB 0xff00
> qinstart = 90 qinfifonext = 90
> QINFIFO:
> WAITING_TID_QUEUES:
> 0 ( 0x3 )
> Pending list:
> 3 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7] Total 1
I had very similar problems on the aic79xx cards. What you could first
check if QAS is enabled/disabled on both devices, and step the card down
to 160MB/s. I haven't successfully ran any aic79xx Ultra320 card at
Ultra320...
Clock it down and it should be fine...
- Jaco van der Schyff
next prev parent reply other threads:[~2006-11-10 15:01 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-11-10 0:45 aic79xx dumping card state Michael Stone
2006-11-10 15:01 ` Jaco van der Schyff [this message]
2006-11-10 15:39 ` Michael Stone
2006-11-10 17:09 ` Jaco van der Schyff
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20061110150126.GA8222@npjaco \
--to=jvds@netgroup.co.za \
--cc=linux-scsi@vger.kernel.org \
--cc=mstone@mathom.us \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox