Re: AIC7xxx on 2.6.18

Re: AIC7xxx on 2.6.18

[Andrew Morton]

(switched mailing lists)

On Sun, 28 Jan 2007 14:46:20 -0500
Wakko Warner <wakko@animx.eu.org> wrote:

> I have 2 machine that oops with these cards.
> 
> 1) The bios has the option to enable/disable option roms on individual PCI
> slots.  I have an AHA-39160 and an AHA-2940U/UW (dual channel).  If I
> disable option roms, the driver oopses when accessing the 2nd card.
> 
> I can get the oops if really needed as I don't like rebooting this machine.
> 
> 2) I have an AHA-39160 with Apple/Mac firmware.  When attempting to use it
> on a PC, the driver oopses presumably because the card wasn't initialized or
> something.  I realize this is probably not a supported configuration, but I
> don't believe that it should be oopsing.
> 
> I can get the oops for this one if it'll help.

Yes, getting the oops traces will help, thanks.  And confirmation on a more
recent kernel would be good.

Re: AIC7xxx on 2.6.18

[James Bottomley]

On Sun, 2007-01-28 at 16:24 -0800, Andrew Morton wrote:
> Yes, getting the oops traces will help, thanks.  And confirmation on a more
> recent kernel would be good.

Yes, this would be useful, thanks, definitely for the first oops (mixed
U160 and U cards).

I'd be curious to know what the problem with the OF card is, although
the only way to get them to work is to have the driver post the card,
which we don't have the documentation to make happen.

James

Re: AIC7xxx on 2.6.18

[Wakko Warner]

NOTE: I am not on the linux-scsi list, keep me in CC.

Andrew Morton wrote:
> On Sun, 28 Jan 2007 14:46:20 -0500
> Wakko Warner <wakko@animx.eu.org> wrote:
> 
> > I have 2 machine that oops with these cards.
> > 
> > 1) The bios has the option to enable/disable option roms on individual PCI
> > slots.  I have an AHA-39160 and an AHA-2940U/UW (dual channel).  If I
> > disable option roms, the driver oopses when accessing the 2nd card.
> > 
> > I can get the oops if really needed as I don't like rebooting this machine.
> > 
> > 2) I have an AHA-39160 with Apple/Mac firmware.  When attempting to use it
> > on a PC, the driver oopses presumably because the card wasn't initialized or
> > something.  I realize this is probably not a supported configuration, but I
> > don't believe that it should be oopsing.
> > 
> > I can get the oops for this one if it'll help.
> 
> Yes, getting the oops traces will help, thanks.  And confirmation on a more
> recent kernel would be good.

I tested with a 2.6.20-rc6 kernel and the MAC 39160 card.  There was no oops
and I was able to access the 2 disks.  This was on a different PC though. 
I'll try it again on the original PC.

Should I try 2.6.19 as well?

-- 
 Lab tests show that use of micro$oft causes cancer in lab animals
 Got Gas???

Re: AIC7xxx on 2.6.18

[Andrew Morton]

On Tue, 30 Jan 2007 07:18:20 -0500
Wakko Warner <wakko@animx.eu.org> wrote:

> NOTE: I am not on the linux-scsi list, keep me in CC.
> 
> Andrew Morton wrote:
> > On Sun, 28 Jan 2007 14:46:20 -0500
> > Wakko Warner <wakko@animx.eu.org> wrote:
> > 
> > > I have 2 machine that oops with these cards.
> > > 
> > > 1) The bios has the option to enable/disable option roms on individual PCI
> > > slots.  I have an AHA-39160 and an AHA-2940U/UW (dual channel).  If I
> > > disable option roms, the driver oopses when accessing the 2nd card.
> > > 
> > > I can get the oops if really needed as I don't like rebooting this machine.
> > > 
> > > 2) I have an AHA-39160 with Apple/Mac firmware.  When attempting to use it
> > > on a PC, the driver oopses presumably because the card wasn't initialized or
> > > something.  I realize this is probably not a supported configuration, but I
> > > don't believe that it should be oopsing.
> > > 
> > > I can get the oops for this one if it'll help.
> > 
> > Yes, getting the oops traces will help, thanks.  And confirmation on a more
> > recent kernel would be good.
> 
> I tested with a 2.6.20-rc6 kernel and the MAC 39160 card.  There was no oops
> and I was able to access the 2 disks.  This was on a different PC though. 
> I'll try it again on the original PC.

Thanks.

> Should I try 2.6.19 as well?

There's not a lot of point in doing so.  If/when we come up with a
2.6.20-rc6 fix we'll know whether it is applicable to 2.6.19.x.

Re: AIC7xxx on 2.6.18

[Wakko Warner]

NOTE: I am not on the linux-scsi list, keep me in CC.

Andrew Morton wrote:
> On Tue, 30 Jan 2007 07:18:20 -0500
> Wakko Warner <wakko@animx.eu.org> wrote:
> > Andrew Morton wrote:
> > > Yes, getting the oops traces will help, thanks.  And confirmation on a more
> > > recent kernel would be good.
> > 
> > I tested with a 2.6.20-rc6 kernel and the MAC 39160 card.  There was no oops
> > and I was able to access the 2 disks.  This was on a different PC though. 
> > I'll try it again on the original PC.
> 
> Thanks.

The PC was a completely different PC when I tried it that time.  This time,
I tried it on a similar PC (same motherboard model, but not the exact same
machine).  I had no problems with 2.6.18.  I looked a little close and I
noticed that the original machine was actually overclocked.  I did the same
to the machine that works and it is now not working.  So the problem with
the mac card seems to be the overclocking.  I completely forgotten about it
since it was a test machine anyway.

So this just leaves the problem I've experienced on the machine with the PC
u160 and the u/uw dual card.

> > Should I try 2.6.19 as well?
> 
> There's not a lot of point in doing so.  If/when we come up with a
> 2.6.20-rc6 fix we'll know whether it is applicable to 2.6.19.x.

I'll try 2.6.19 on the machine with the 2 scsi cards with the option roms
disabled.  I'd rather not run a -rc kernel on this machine.

-- 
 Lab tests show that use of micro$oft causes cancer in lab animals
 Got Gas???

Re: AIC7xxx on 2.6.18

[Wakko Warner]

Andrew Morton wrote:
> Yes, getting the oops traces will help, thanks.  And confirmation on a more
> recent kernel would be good.

Here's what I get.  I used netconsole so whatever was logged prior to it
starting was lost.

The PC is a suprtmicro x5da8 with an onboard dual channel AHA-39320 u320
controller.  I have a dual channel AHA-39160 u160 and a dual channel
AHA-2940U/UW (ch0/internal is wide/narrow, ch1/externel is narrow).

I thought it was because I had option roms turned off, but when I turned
them on, it still has problems.  What's odd is the fact that if I boot with
init=/bin/sh, modprobe aic7xxx, it works fine and I can exec init and it
works fine.

I have the logs when it failes and when it works, see below.

The console log when it fails:
------------------------------------------------------------------------------
[   22.802262]         <Adaptec 3960D Ultra160 SCSI adapter>
[   22.802264]         aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
[   22.802265] 
[   25.040283] scsi 2:0:0:0: Direct-Access     SEAGATE  SX150176LC       BA12 PQ: 0 ANSI: 2
[   25.040359] scsi2:A:0:0: Tagged Queuing enabled.  Depth 32
[   25.040449]  target2:0:0: Beginning Domain Validation
[   25.045753]  target2:0:0: wide asynchronous
[   25.049768]  target2:0:0: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 15)
[   25.053043]  target2:0:0: Domain Validation skipping write tests
[   25.053089]  target2:0:0: Ending Domain Validation
[   25.057249] SCSI device sdd: 97693755 512-byte hdwr sectors (50019 MB)
[   25.059872] sdd: Write Protect is off
[   25.062420] SCSI device sdd: drive cache: write through w/ FUA
[   25.063275] SCSI device sdd: 97693755 512-byte hdwr sectors (50019 MB)
[   25.065868] sdd: Write Protect is off
[   25.068853] SCSI device sdd: drive cache: write through w/ FUA
[   25.068915]  sdd: unknown partition table
[   25.084327] sd 2:0:0:0: Attached scsi disk sdd
[   25.094681] scsi 2:0:1:0: Direct-Access     SEAGATE  SX150176LC       BA08 PQ: 0 ANSI: 2
[   25.094768] scsi2:A:1:0: Tagged Queuing enabled.  Depth 32
[   25.094867]  target2:0:1: Beginning Domain Validation
[   25.100679]  target2:0:1: wide asynchronous
[   25.105894]  target2:0:1: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 15)
[   25.110233]  target2:0:1: Domain Validation skipping write tests
[   25.110312]  target2:0:1: Ending Domain Validation
[   25.125724] SCSI device sde: 97693755 512-byte hdwr sectors (50019 MB)
[   25.133748] sde: Write Protect is off
[   25.136491] SCSI device sde: drive cache: write through w/ FUA
[   25.137521] SCSI device sde: 97693755 512-byte hdwr sectors (50019 MB)
[   25.140189] sde: Write Protect is off
[   25.142882] SCSI device sde: drive cache: write through w/ FUA
[   25.142960]  sde: unknown partition table
[   25.165486] sd 2:0:1:0: Attached scsi disk sde
[   25.172022] scsi 2:0:2:0: Direct-Access     SEAGATE  SX150176LC       BA08 PQ: 0 ANSI: 2
[   25.172116] scsi2:A:2:0: Tagged Queuing enabled.  Depth 32
[   25.172222]  target2:0:2: Beginning Domain Validation
[   25.178504]  target2:0:2: wide asynchronous
[   25.189460]  target2:0:2: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 15)
[   25.193309]  target2:0:2: Domain Validation skipping write tests
[   25.193407]  target2:0:2: Ending Domain Validation
[   25.203341] SCSI device sdf: 97693755 512-byte hdwr sectors (50019 MB)
[   25.205673] sdf: Write Protect is off
[   25.208401] SCSI device sdf: drive cache: write through w/ FUA
[   25.209368] SCSI device sdf: 97693755 512-byte hdwr sectors (50019 MB)
[   25.212067] sdf: Write Protect is off
[   25.214866] SCSI device sdf: drive cache: write through w/ FUA
[   25.214965]  sdf: unknown partition table
[   25.233725] sd 2:0:2:0: Attached scsi disk sdf
[   25.243892] scsi 2:0:3:0: Direct-Access     SEAGATE  SX150176LC       BA12 PQ: 0 ANSI: 2
[   25.243991] scsi2:A:3:0: Tagged Queuing enabled.  Depth 32
[   25.244106]  target2:0:3: Beginning Domain Validation
[   25.249550]  target2:0:3: wide asynchronous
[   25.253758]  target2:0:3: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 15)
[   25.257254]  target2:0:3: Domain Validation skipping write tests
[   25.257342]  target2:0:3: Ending Domain Validation
[   25.264705] SCSI device sdg: 97693755 512-byte hdwr sectors (50019 MB)
[   25.269670] sdg: Write Protect is off
[   25.272365] SCSI device sdg: drive cache: write through w/ FUA
[   25.273277] SCSI device sdg: 97693755 512-byte hdwr sectors (50019 MB)
[   25.275906] sdg: Write Protect is off
[   25.278531] SCSI device sdg: drive cache: write through w/ FUA
[   25.278614]  sdg: unknown partition table
[   25.297553] sd 2:0:3:0: Attached scsi disk sdg
[   25.306920] scsi 2:0:4:0: Direct-Access     SEAGATE  SX150176LC       BA12 PQ: 0 ANSI: 2
[   25.307062] scsi2:A:4:0: Tagged Queuing enabled.  Depth 32
[   25.307176]  target2:0:4: Beginning Domain Validation
[   25.312696]  target2:0:4: wide asynchronous
[   25.316827]  target2:0:4: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 15)
[   25.320227]  target2:0:4: Domain Validation skipping write tests
[   25.320297]  target2:0:4: Ending Domain Validation
[   25.324299] SCSI device sdh: 97693755 512-byte hdwr sectors (50019 MB)
[   25.329720] sdh: Write Protect is off
[   25.332454] SCSI device sdh: drive cache: write through w/ FUA
[   25.333429] SCSI device sdh: 97693755 512-byte hdwr sectors (50019 MB)
[   25.336077] sdh: Write Protect is off
[   25.338771] SCSI device sdh: drive cache: write through w/ FUA
[   25.338869]  sdh: unknown partition table
[   25.359104] sd 2:0:4:0: Attached scsi disk sdh
[   27.442022] scsi 2:0:14:0: Processor         SYMBIOS  SYM2000          2    PQ: 0 ANSI: 2
[   27.442146]  target2:0:14: Beginning Domain Validation
[   27.442620]  target2:0:14: Ending Domain Validation
[   27.715907] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 49 (level, low) -> IRQ 20
[   28.932735] scsi3 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[   28.932738]         <Adaptec 3960D Ultra160 SCSI adapter>
[   28.932739]         aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
[   28.932741] 
[   31.144275] scsi 3:0:0:0: Direct-Access     SEAGATE  SX150176LC       BA08 PQ: 0 ANSI: 2
[   31.144349] scsi3:A:0:0: Tagged Queuing enabled.  Depth 32
[   31.144435]  target3:0:0: Beginning Domain Validation
[   31.149771]  target3:0:0: wide asynchronous
[   31.153811]  target3:0:0: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 15)
[   31.157108]  target3:0:0: Domain Validation skipping write tests
[   31.157155]  target3:0:0: Ending Domain Validation
[   31.165001] SCSI device sdi: 97693755 512-byte hdwr sectors (50019 MB)
[   31.167386] sdi: Write Protect is off
[   31.170053] SCSI device sdi: drive cache: write through w/ FUA
[   31.171047] SCSI device sdi: 97693755 512-byte hdwr sectors (50019 MB)
[   31.173749] sdi: Write Protect is off
[   31.177502] SCSI device sdi: drive cache: write through w/ FUA
[   31.177578]  sdi: unknown partition table
[   31.195213] sd 3:0:0:0: Attached scsi disk sdi
[   31.206853] scsi 3:0:1:0: Direct-Access     SEAGATE  SX150176LC       BA08 PQ: 0 ANSI: 2
[   31.206931] scsi3:A:1:0: Tagged Queuing enabled.  Depth 32
[   31.207036]  target3:0:1: Beginning Domain Validation
[   31.223265]  target3:0:1: wide asynchronous
[   31.227425]  target3:0:1: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 15)
[   31.230835]  target3:0:1: Domain Validation skipping write tests
[   31.230904]  target3:0:1: Ending Domain Validation
[   31.234601] SCSI device sdj: 97693755 512-byte hdwr sectors (50019 MB)
[   31.236894] sdj: Write Protect is off
[   31.239667] SCSI device sdj: drive cache: write through w/ FUA
[   31.240835] SCSI device sdj: 97693755 512-byte hdwr sectors (50019 MB)
[   31.243557] sdj: Write Protect is off
[   31.249531] SCSI device sdj: drive cache: write through w/ FUA
[   31.249610]  sdj: unknown partition table
[   31.270734] sd 3:0:1:0: Attached scsi disk sdj
[   31.283528] scsi 3:0:2:0: Direct-Access     SEAGATE  SX150176LC       BA08 PQ: 0 ANSI: 2
[   31.284432] scsi3:A:2:0: Tagged Queuing enabled.  Depth 32
[   31.284547]  target3:0:2: Beginning Domain Validation
[   31.298487]  target3:0:2: wide asynchronous
[   31.305033]  target3:0:2: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 15)
[   31.308464]  target3:0:2: Domain Validation skipping write tests
[   31.308533]  target3:0:2: Ending Domain Validation
[   31.316184] SCSI device sdk: 97693755 512-byte hdwr sectors (50019 MB)
[   31.319338] sdk: Write Protect is off
[   31.322105] SCSI device sdk: drive cache: write through w/ FUA
[   31.323146] SCSI device sdk: 97693755 512-byte hdwr sectors (50019 MB)
[   31.325842] sdk: Write Protect is off
[   31.329005] SCSI device sdk: drive cache: write through w/ FUA
[   31.329102]  sdk: unknown partition table
[   31.349209] sd 3:0:2:0: Attached scsi disk sdk
[   31.359122] scsi 3:0:3:0: Direct-Access     SEAGATE  SX150176LC       BA08 PQ: 0 ANSI: 2
[   31.359242] scsi3:A:3:0: Tagged Queuing enabled.  Depth 32
[   31.359417]  target3:0:3: Beginning Domain Validation
[   31.365700]  target3:0:3: wide asynchronous
[   31.370023]  target3:0:3: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 15)
[   31.373668]  target3:0:3: Domain Validation skipping write tests
[   31.373734]  target3:0:3: Ending Domain Validation
[   31.385119] SCSI device sdl: 97693755 512-byte hdwr sectors (50019 MB)
[   31.387365] sdl: Write Protect is off
[   31.390054] SCSI device sdl: drive cache: write through w/ FUA
[   31.392132] SCSI device sdl: 97693755 512-byte hdwr sectors (50019 MB)
[   31.394836] sdl: Write Protect is off
[   31.398006] SCSI device sdl: drive cache: write through w/ FUA
[   31.398108]  sdl: unknown partition table
[   31.420194] sd 3:0:3:0: Attached scsi disk sdl
[   31.434188] scsi 3:0:4:0: Direct-Access     SEAGATE  SX150176LC       BA08 PQ: 0 ANSI: 2
[   31.434308] scsi3:A:4:0: Tagged Queuing enabled.  Depth 32
[   31.434469]  target3:0:4: Beginning Domain Validation
[   31.439914]  target3:0:4: wide asynchronous
[   31.444090]  target3:0:4: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 15)
[   31.447536]  target3:0:4: Domain Validation skipping write tests
[   31.447606]  target3:0:4: Ending Domain Validation
[   31.450531] SCSI device sdm: 97693755 512-byte hdwr sectors (50019 MB)
[   31.452756] sdm: Write Protect is off
[   31.455505] SCSI device sdm: drive cache: write through w/ FUA
[   31.456542] SCSI device sdm: 97693755 512-byte hdwr sectors (50019 MB)
[   31.459668] sdm: Write Protect is off
[   31.462448] SCSI device sdm: drive cache: write through w/ FUA
[   31.462545]  sdm: unknown partition table
[   31.478519] sd 3:0:4:0: Attached scsi disk sdm
[   33.542811] scsi 3:0:14:0: Processor         SYMBIOS  SYM2000          2    PQ: 0 ANSI: 2
[   33.542942]  target3:0:14: Beginning Domain Validation
[   33.543501]  target3:0:14: Ending Domain Validation
[   33.831621] ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 16 (level, low) -> IRQ 21
[   34.847248] scsi4 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[   34.847251]         <Adaptec 2940/DUAL Ultra SCSI adapter>
[   34.847252]         aic7895: Ultra Wide Channel A, SCSI Id=7, 32/253 SCBs
[   34.847253] 
[   35.396894] scsi 4:0:2:0: CD-ROM            PLEXTOR  CD-ROM PX-40TS   1.11 PQ: 0 ANSI: 2
[   35.397007]  target4:0:2: Beginning Domain Validation
[   35.403496]  target4:0:2: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 15)
[   35.408906]  target4:0:2: Domain Validation skipping write tests
[   35.408972]  target4:0:2: Ending Domain Validation
[   35.427265] scsi 4:0:3:0: CD-ROM            PLEXTOR  CD-R   PX-W4012S 1.01 PQ: 0 ANSI: 2
[   35.427407]  target4:0:3: Beginning Domain Validation
[   35.429785]  target4:0:3: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 15)
[   35.434272]  target4:0:3: Domain Validation skipping write tests
[   35.434336]  target4:0:3: Ending Domain Validation
[   35.457701] scsi 4:0:4:0: CD-ROM            NAKAMICH MJ-5.16S         1.07 PQ: 0 ANSI: 2
[   35.457864]  target4:0:4: Beginning Domain Validation
[   35.474212]  target4:0:4: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
[   35.483112]  target4:0:4: Domain Validation skipping write tests
[   35.483187]  target4:0:4: Ending Domain Validation
[   35.489845] scsi 4:0:4:1: CD-ROM            NAKAMICH MJ-5.16S         1.07 PQ: 0 ANSI: 2
[   35.489970]  target4:0:4: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
[   35.504490] scsi 4:0:4:2: CD-ROM            NAKAMICH MJ-5.16S         1.07 PQ: 0 ANSI: 2
[   35.504630]  target4:0:4: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
[   35.531322] scsi 4:0:4:3: CD-ROM            NAKAMICH MJ-5.16S         1.07 PQ: 0 ANSI: 2
[   35.531457]  target4:0:4: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
[   35.543143] scsi 4:0:4:4: CD-ROM            NAKAMICH MJ-5.16S         1.07 PQ: 0 ANSI: 2
[   35.543272]  target4:0:4: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
[   35.645497] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[   35.645566] Uniform CD-ROM driver Revision: 3.20
[   37.736693] scsi 4:0:5:0: CD-ROM            YAMAHA   CRW8424S         1.0d PQ: 0 ANSI: 2
[   37.736778]  target4:0:5: Beginning Domain Validation
[   37.755233]  target4:0:5: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 15)
[   37.764863]  target4:0:5: Domain Validation skipping write tests
[   37.764910]  target4:0:5: Ending Domain Validation
[   40.154122] ACPI: PCI Interrupt 0000:05:01.1[B] -> GSI 17 (level, low) -> IRQ 22
[   40.158190] scsi4: PCI error Interrupt at seqaddr = 0x1bb
[   40.158261] scsi4: Signaled a Target Abort
[   40.158777] sr1: scsi-1 drive
[   40.159611] scsi4:A:3:0: ahc_intr - referenced scb not valid during seqint 0x71 scb(255)
[   40.159719] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
[   40.159720] scsi4: Dumping Card State in Message-in phase, at SEQADDR 0x1bb
[   40.159838] Card was paused
[   40.159888] ACCUM = 0x0, SINDEX = 0x71, DINDEX = 0xe4, ARG_2 = 0x0
[   40.159940] HCNT = 0x8 SCBPTR = 0x0
[   40.159993] SCSISIGI[0xe6]:(REQI|BSYI|MSGI|IOI|CDI) 
[   40.160298] ERROR[0x40]:(PCIERRSTAT) SCSIBUSL[0x0] 
[   40.160534] LASTPHASE[0xe0]:(MSGI|IOI|CDI) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI) 
[   40.160914] SBLKCTL[0x2]:(SELWIDE) SCSIRATE[0xf]:(SXFR_ULTRA2) 
[   40.161187] SEQCTL[0x10]:(FASTMODE) SEQ_FLAGS[0x0] 
[   40.161420] SSTAT0[0x6]:(SPIORDY|SDONE) SSTAT1[0x3]:(REQINIT|PHASECHG) 
[   40.161742] SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] 
[   40.162003] SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO) 
[   40.162271] SXFRCTL0[0xa8]:(SPIOEN|FAST20|DFON) 
[   40.162504] DFCNTRL[0x4]:(DIRECTION) DFSTATUS[0x65]:(FIFOEMP|DFTHRESH|FIFOQWDEMP|DFCACHETH) 
[   40.162870] STACK: 0x114 0x0 0x179 0x18f
[   40.163058] SCB count = 4
[   40.163142] Kernel NEXTQSCB = 3
[   40.163188] Card NEXTQSCB = 3
[   40.163233] QINFIFO entries: 
[   40.163322] Waiting Queue entries: 
[   40.163408] Disconnected Queue entries: 
[   40.163491] QOUTFIFO entries: 
[   40.163582] Sequencer Free SCB List: 1 
[   40.163712] Sequencer SCB Info: 
[   40.163761]   0 SCB_CONTROL[0xff]:(DISCONNECTED|ULTRAENB|MK_MESSAGE|TAG_ENB|DISCENB|TARGET_SCB|SCB_TAG_TYPE) 
[   40.164330] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
[   40.164623] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
[   40.164911]   1 SCB_CONTROL[0xff]:(DISCONNECTED|ULTRAENB|MK_MESSAGE|TAG_ENB|DISCENB|TARGET_SCB|SCB_TAG_TYPE) 
[   40.165430] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
[   40.165698] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
[   40.165971]   2 SCB_CONTROL[0xff]:(DISCONNECTED|ULTRAENB|MK_MESSAGE|TAG_ENB|DISCENB|TARGET_SCB|SCB_TAG_TYPE) 
[   40.166476] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
[   40.166724] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
[   40.166949]   3 SCB_CONTROL[0xff]:(DISCONNECTED|ULTRAENB|MK_MESSAGE|TAG_ENB|DISCENB|TARGET_SCB|SCB_TAG_TYPE) 
[   40.167435] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
[   40.167683] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
[   40.167927]   4 SCB_CONTROL[0xff]:(DISCONNECTED|ULTRAENB|MK_MESSAGE|TAG_ENB|DISCENB|TARGET_SCB|SCB_TAG_TYPE) 
[   40.168435] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
[   40.168708] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
[   40.168971]   5 SCB_CONTROL[0xff]:(DISCONNECTED|ULTRAENB|MK_MESSAGE|TAG_ENB|DISCENB|TARGET_SCB|SCB_TAG_TYPE) 
[   40.169556] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
[   40.170055] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
[   40.170290]   6 SCB_CONTROL[0xff]:(DISCONNECTED|ULTRAENB|MK_MESSAGE|TAG_ENB|DISCENB|TARGET_SCB|SCB_TAG_TYPE) 
[   40.170775] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
[   40.171011] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
[   40.171236]   7 SCB_CONTROL[0xff]:(DISCONNECTED|ULTRAENB|MK_MESSAGE|TAG_ENB|DISCENB|TARGET_SCB|SCB_TAG_TYPE) 
[   40.171695] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
[   40.171921] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
[   40.172139]   8 SCB_CONTROL[0xff]:(DISCONNECTED|ULTRAENB|MK_MESSAGE|TAG_ENB|DISCENB|TARGET_SCB|SCB_TAG_TYPE) 
[   40.172592] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
[   40.172815] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
[   40.173034]   9 SCB_CONTROL[0xff]:(DISCONNECTED|ULTRAENB|MK_MESSAGE|TAG_ENB|DISCENB|TARGET_SCB|SCB_TAG_TYPE) 
[   40.173487] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
[   40.173711] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
[   40.173946]  10 SCB_CONTROL[0xff]:(DISCONNECTED|ULTRAENB|MK_MESSAGE|TAG_ENB|DISCENB|TARGET_SCB|SCB_TAG_TYPE) 
[   40.174403] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
[   40.174626] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
[   40.174847]  11 SCB_CONTROL[0xff]:(DISCONNECTED|ULTRAENB|MK_MESSAGE|TAG_ENB|DISCENB|TARGET_SCB|SCB_TAG_TYPE) 
[   40.175299] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
[   40.175524] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
[   40.175747]  12 SCB_CONTROL[0xff]:(DISCONNECTED|ULTRAENB|MK_MESSAGE|TAG_ENB|DISCENB|TARGET_SCB|SCB_TAG_TYPE) 
[   40.177129] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
[   40.177392] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
[   40.177622]  13 SCB_CONTROL[0xff]:(DISCONNECTED|ULTRAENB|MK_MESSAGE|TAG_ENB|DISCENB|TARGET_SCB|SCB_TAG_TYPE) 
[   40.178111] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
[   40.178337] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
[   40.178551]  14 SCB_CONTROL[0xff]:(DISCONNECTED|ULTRAENB|MK_MESSAGE|TAG_ENB|DISCENB|TARGET_SCB|SCB_TAG_TYPE) 
[   40.179026] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
[   40.179268] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
[   40.179491]  15 SCB_CONTROL[0xff]:(DISCONNECTED|ULTRAENB|MK_MESSAGE|TAG_ENB|DISCENB|TARGET_SCB|SCB_TAG_TYPE) 
[   40.180118] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
[   40.180329] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
[   40.180536]  16 SCB_CONTROL[0xff]:(DISCONNECTED|ULTRAENB|MK_MESSAGE|TAG_ENB|DISCENB|TARGET_SCB|SCB_TAG_TYPE) 
[   40.180963] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
[   40.181174] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
[   40.181381]  17 SCB_CONTROL[0xff]:(DISCONNECTED|ULTRAENB|MK_MESSAGE|TAG_ENB|DISCENB|TARGET_SCB|SCB_TAG_TYPE) 
[   40.181808] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) 
[   40.182023] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 
[   40.182229]  18 SCB_CONTROL[0xff]:(DISCONNECTED|ULTRAENB|MK_MESSAGE|TAG_ENB|DISCENB|TARGET_SCB|SCB_TAG_TYPE) 
[   40.182657] SCB_SCSIID[0xff][   40.195507]  [<c011b69d>] [   40.195587]  [<f8859af4>] ahc_handle_seqint+0x16af/0x2bea [aic7xxx]
[   40.195679]  [<f883323e>] e1000_unmap_and_free_tx_resource+0x14/0x22 [e1000]
[   40.195768]  [<f88348fe>] e1000_clean_tx_irq+0x68/0x259 [e1000]
[   40.195855]  [<f8866d28>] ahc_linux_isr+0x22c/0x247 [aic7xxx]
[   40.195943]  [<c013a18d>] handle_IRQ_event+0x31/0x5a
[   40.196025]  [<c013b5c2>] handle_fasteoi_irq+0x73/0xbd
[   40.196105]  [<c013b54f>] handle_fasteoi_irq+0x0/0xbd
[   40.196185]  [<c01059ff>] do_IRQ+0x83/0xe4
[   40.196267]  [<c010397a>] common_interrupt+0x1a/0x20
[   40.196348]  [<f885da4f>] ahc_read_seeprom+0x23c/0x36e [aic7xxx]
[   40.196435]  [<f885fe51>] ahc_pci_config+0x4ce/0x17c3 [aic7xxx]
[   40.196521]  [<c010e400>] mp_register_gsi+0xe8/0x1ca
[   40.196600]  [<c0256f51>] pci_conf1_read+0x85/0xc4
[   40.196682]  [<c025847d>] pci_read+0x3d/0x41
[   40.196763]  [<c01c74a1>] pci_bus_read_config_byte+0x5d/0x65
[   40.196845]  [<f886829c>] ahc_linux_pci_dev_probe+0xec/0x1e1 [aic7xxx]
[   40.196934]  [<c0190960>] sysfs_dirent_exist+0x47/0x72
[   40.197015]  [<c019178d>] sysfs_create_link+0x75/0x180
[   40.197225]  [<c01cbd32>] pci_match_device+0x1e/0xd2
[   40.197305]  [<c0209199>] get_device+0x1b/0x24
[   40.197385]  [<c01cbe60>] pci_device_probe+0x51/0x6d
[   40.197465]  [<c020b795>] really_probe+0x33/0xe2
[   40.197545]  [<c020b96e>] __driver_attach+0x0/0x8f
[   40.197626]  [<c020b9fb>] __driver_attach+0x8d/0x8f
[   40.197705]  [<c020acbc>] bus_for_each_dev+0x58/0x77
[   40.197785]  [<c020b695>] driver_attach+0x26/0x2a
[   40.197866]  [<c020b96e>] __driver_attach+0x0/0x8f
[   40.197947]  [<c020b086>] bus_add_driver+0x6c/0x1ab
[   40.198026]  [<c020bba4>] driver_register+0x5e/0x95
[   40.198106]  [<c01cc018>] __pci_register_driver+0x8a/0xb2
[   40.198187]  [<f88681ac>] ahc_linux_pci_init+0x17/0x1b [aic7xxx]
[   40.198274]  [<f881618e>] ahc_linux_init+0x18e/0x3b7 [aic7xxx]
[   40.198359]  [<c0139a63>] __stop_machine_run+0x87/0xaf
[   40.198439]  [<c02bc3da>] wait_for_completion+0x93/0x9a
[   40.198522]  [<c0136f56>] sys_init_module+0x14c/0x1c56
[   40.198606]  [<c0102ff3>] syscall_call+0x7/0xb
[   40.198686]  =======================

When it works (Full dmesg):
------------------------------------------------------------------------------
[    0.000000] Linux version 2.6.19 (root@(none)) (gcc version 4.1.2
20061115 (prerelease) (Debian 4.1.1-21)) #2 SMP PREEMPT Fri Feb 2 13:58:34
EST 2007
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009b400 (usable)
[    0.000000]  BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003ff70000 (usable)
[    0.000000]  BIOS-e820: 000000003ff70000 - 000000003ff78000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003ff78000 - 000000003ff80000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] 127MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f61f0
[    0.000000] Entering add_active_range(0, 0, 262000) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   262000
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   262000
[    0.000000] On node 0 totalpages: 262000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 254 pages used for memmap
[    0.000000]   HighMem zone: 32370 pages, LIFO batch:7
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP (v000 PTLTD                                 ) @
0x000f6180
[    0.000000] ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000)
@ 0x3ff73fb9
[    0.000000] ACPI: FADT (v001 INTEL  PLACER   0x06040000 PTL  0x00000008)
@ 0x3ff77e78
[    0.000000] ACPI: MADT (v001 PTLTD    APIC   0x06040000  LTP 0x00000000)
@ 0x3ff77eec
[    0.000000] ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001)
@ 0x3ff77f88
[    0.000000] ACPI: SPCR (v001 PTLTD  $UCRTBL$ 0x06040000 PTL  0x00000001)
@ 0x3ff77fb0
[    0.000000] ACPI: DSDT (v001  INTEL   PLACER 0x06040000 MSFT 0x0100000e)
@ 0x00000000
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:2 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
[    0.000000] Processor #6 15:2 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1 15:2 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
[    0.000000] Processor #7 15:2 APIC version 20
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
0-23
[    0.000000] ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI
24-47
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec80100] gsi_base[48])
[    0.000000] IOAPIC[2]: apic_id 4, version 32, address 0xfec80100, GSI
48-71
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 3 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 50000000 (gap:
40000000:bec00000)
[    0.000000] Detected 2666.062 MHz processor.
[   55.250445] Built 1 zonelists.  Total pages: 259954
[   55.250448] Kernel command line: root=/dev/sda1 init=/bin/sh
[   55.250621] mapped APIC to ffffd000 (fee00000)
[   55.250624] mapped IOAPIC to ffffc000 (fec00000)
[   55.250626] mapped IOAPIC to ffffb000 (fec80000)
[   55.250629] mapped IOAPIC to ffffa000 (fec80100)
[   55.250632] Enabling fast FPU save and restore... done.
[   55.250635] Enabling unmasked SIMD FPU exception support... done.
[   55.250639] Initializing CPU#0
[   55.250736] CPU 0 irqstacks, hard=c03af000 soft=c03ab000
[   55.250739] PID hash table entries: 4096 (order: 12, 16384 bytes)
[   55.251850] Console: colour VGA+ 80x25
[   55.254826] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[   55.255566] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[   55.280544] Memory: 1035056k/1048000k available (1787k kernel code,
12304k reserved, 697k data, 208k init, 130496k highmem)
[   55.280613] virtual kernel memory layout:
[   55.280614]     fixmap  : 0xfff83000 - 0xfffff000   ( 496 kB)
[   55.280615]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   55.280616]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   55.280617]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   55.280618]       .init : 0xc0372000 - 0xc03a6000   ( 208 kB)
[   55.280619]       .data : 0xc02bed2f - 0xc036d434   ( 697 kB)
[   55.280620]       .text : 0xc0100000 - 0xc02bed2f   (1787 kB)
[   55.280963] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[   55.358716] Calibrating delay using timer specific routine.. 5336.07
BogoMIPS (lpj=10672156)
[   55.358857] Mount-cache hash table entries: 512
[   55.359038] CPU: After generic identify, caps: bfebfbff 00000000 00000000
00000000 00004400 00000000 00000000
[   55.359050] CPU: Trace cache: 12K uops, L1 D cache: 8K
[   55.359128] CPU: L2 cache: 512K
[   55.359171] CPU: Physical Processor ID: 0
[   55.359215] CPU: After all inits, caps: bfebfbff 00000000 00000000
00000080 00004400 00000000 00000000
[   55.359223] Intel machine check architecture supported.
[   55.359270] Intel machine check reporting enabled on CPU#0.
[   55.359316] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
[   55.359362] CPU0: Thermal monitoring enabled
[   55.359425] Checking 'hlt' instruction... OK.
[   55.374998] Freeing SMP alternatives: 12k freed
[   55.375043] ACPI: Core revision 20060707
[   55.379527] CPU0: Intel(R) Xeon(TM) CPU 2.66GHz stepping 05
[   55.379658] Booting processor 1/1 eip 2000
[   55.379703] CPU 1 irqstacks, hard=c03b0000 soft=c03ac000
[   55.390041] Initializing CPU#1
[   55.470689] Calibrating delay using timer specific routine.. 5332.22
BogoMIPS (lpj=10664440)
[   55.470698] CPU: After generic identify, caps: bfebfbff 00000000 00000000
00000000 00004400 00000000 00000000
[   55.470709] CPU: Trace cache: 12K uops, L1 D cache: 8K
[   55.470712] CPU: L2 cache: 512K
[   55.470714] CPU: Physical Processor ID: 0
[   55.470716] CPU: After all inits, caps: bfebfbff 00000000 00000000
00000080 00004400 00000000 00000000
[   55.470724] Intel machine check architecture supported.
[   55.470730] Intel machine check reporting enabled on CPU#1.
[   55.470733] CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
[   55.470736] CPU1: Thermal monitoring enabled
[   55.470907] CPU1: Intel(R) Xeon(TM) CPU 2.66GHz stepping 05
[   55.471437] Booting processor 2/6 eip 2000
[   55.471483] CPU 2 irqstacks, hard=c03b1000 soft=c03ad000
[   55.482063] Initializing CPU#2
[   55.562668] Calibrating delay using timer specific routine.. 5332.23
BogoMIPS (lpj=10664471)
[   55.562676] CPU: After generic identify, caps: bfebfbff 00000000 00000000
00000000 00004400 00000000 00000000
[   55.562684] CPU: Trace cache: 12K uops, L1 D cache: 8K
[   55.562687] CPU: L2 cache: 512K
[   55.562688] CPU: Physical Processor ID: 3
[   55.562690] CPU: After all inits, caps: bfebfbff 00000000 00000000
00000080 00004400 00000000 00000000
[   55.562696] Intel machine check architecture supported.
[   55.562701] Intel machine check reporting enabled on CPU#2.
[   55.562703] CPU2: Intel P4/Xeon Extended MCE MSRs (12) available
[   55.562706] CPU2: Thermal monitoring enabled
[   55.562917] CPU2: Intel(R) Xeon(TM) CPU 2.66GHz stepping 05
[   55.563430] Booting processor 3/7 eip 2000
[   55.563475] CPU 3 irqstacks, hard=c03b2000 soft=c03ae000
[   55.573716] Initializing CPU#3
[   55.654647] Calibrating delay using timer specific routine.. 5332.30
BogoMIPS (lpj=10664613)
[   55.654656] CPU: After generic identify, caps: bfebfbff 00000000 00000000
00000000 00004400 00000000 00000000
[   55.654667] CPU: Trace cache: 12K uops, L1 D cache: 8K
[   55.654670] CPU: L2 cache: 512K
[   55.654672] CPU: Physical Processor ID: 3
[   55.654674] CPU: After all inits, caps: bfebfbff 00000000 00000000
00000080 00004400 00000000 00000000
[   55.654681] Intel machine check architecture supported.
[   55.654687] Intel machine check reporting enabled on CPU#3.
[   55.654690] CPU3: Intel P4/Xeon Extended MCE MSRs (12) available
[   55.654694] CPU3: Thermal monitoring enabled
[   55.654822] CPU3: Intel(R) Xeon(TM) CPU 2.66GHz stepping 05
[   55.655331] Total of 4 processors activated (21332.84 BogoMIPS).
[   55.655667] ENABLING IO-APIC IRQs
[   55.655888] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   55.802622] checking TSC synchronization across 4 CPUs: passed.
[    0.011955] Brought up 4 CPUs
[    0.111712] migration_cost=81
[    0.112311] NET: Registered protocol family 16
[    0.112440] ACPI: bus type pci registered
[    0.116387] PCI: PCI BIOS revision 2.10 entry at 0xfd8e5, last bus=5
[    0.116433] PCI: Using configuration type 1
[    0.116477] Setting up standard PCI resources
[    0.138385] ACPI: Interpreter enabled
[    0.138432] ACPI: Using IOAPIC for interrupt routing
[    0.138963] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.139012] PCI: Probing PCI hardware (bus 00)
[    0.142048] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[    0.142097] PCI quirk: region 1180-11bf claimed by ICH4 GPIO
[    0.142190] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[    0.142427] Boot video device is 0000:01:00.0
[    0.143401] PCI: Transparent bridge - 0000:00:1e.0
[    0.143475] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.148826] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 10 *11 14 15)
[    0.149298] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 10 *11 14 15)
[    0.149762] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 11 14 15) *5
[    0.150259] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *10 11 14 15)
[    0.150729] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 *11 14 15)
[    0.151201] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 *11 14 15)
[    0.151672] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 11 14 15) *0,
disabled.
[    0.152260] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 10 *11 14 15)
[    0.154636] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICH4._PRT]
[    0.155489] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HLB_.P64A._PRT]
[    0.155843] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HLB_.P64B._PRT]
[    0.156625] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    0.156982] SCSI subsystem initialized
[    0.157066] PCI: Using ACPI for IRQ routing
[    0.157111] PCI: If a device doesn't work, try "pci=routeirq".  If it
helps, post a report
[    0.208710] PCI: Bridge: 0000:00:01.0
[    0.208756]   IO window: 3000-3fff
[    0.208800]   MEM window: d0100000-d01fffff
[    0.208845]   PREFETCH window: e8000000-f7ffffff
[    0.208895] PCI: Bridge: 0000:02:1d.0
[    0.208939]   IO window: 4000-4fff
[    0.208985]   MEM window: d0300000-d03fffff
[    0.209031]   PREFETCH window: 50000000-500fffff
[    0.209079] PCI: Bridge: 0000:02:1f.0
[    0.209122]   IO window: 5000-5fff
[    0.209168]   MEM window: d0400000-d04fffff
[    0.209213]   PREFETCH window: 50100000-501fffff
[    0.209260] PCI: Bridge: 0000:00:02.0
[    0.209303]   IO window: 4000-5fff
[    0.209347]   MEM window: d0200000-d04fffff
[    0.209392]   PREFETCH window: 50000000-501fffff
[    0.209438] PCI: Bridge: 0000:00:1e.0
[    0.209482]   IO window: 6000-6fff
[    0.209528]   MEM window: d0500000-d05fffff
[    0.209574]   PREFETCH window: 50200000-502fffff
[    0.209652] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    0.209693] NET: Registered protocol family 2
[    0.247969] IP route cache hash table entries: 32768 (order: 5, 131072
bytes)
[    0.248250] TCP established hash table entries: 131072 (order: 8, 1572864
bytes)
[    0.250005] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[    0.251093] TCP: Hash tables configured (established 131072 bind 65536)
[    0.251144] TCP reno registered
[    0.251391] Simple Boot Flag at 0x36 set to 0x1
[    0.251493] Machine check exception polling timer started.
[    0.251858] highmem bounce pool size: 64 pages
[    0.252182] io scheduler noop registered
[    0.252259] io scheduler deadline registered (default)
[    0.252605] ACPI: Power Button (FF) [PWRF]
[    0.252680] ACPI: Power Button (CM) [PWRB]
[    0.255428] ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 32 (level, low) ->
IRQ 16
[    1.375658] scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
[    1.375660]         <Adaptec AIC7902 Ultra320 SCSI adapter>
[    1.375661]         aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X
101-133Mhz, 512 SCBs
[    1.375662] 
[    1.388245] scsi 0:0:0:0: Direct-Access     SEAGATE  ST34572W
0876 PQ: 0 ANSI: 2
[    1.388304]  target0:0:0: asynchronous
[    1.388347] scsi0:A:0:0: Tagged Queuing enabled.  Depth 32
[    1.388432]  target0:0:0: Beginning Domain Validation
[    1.402919]  target0:0:0: wide asynchronous
[    1.413551]  target0:0:0: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset
15)
[    1.423495]  target0:0:0: Domain Validation skipping write tests
[    1.423541]  target0:0:0: Ending Domain Validation
[    1.436046] scsi 0:0:1:0: Direct-Access     QUANTUM  QM39100TD-SW
N491 PQ: 0 ANSI: 2
[    1.436102]  target0:0:1: asynchronous
[    1.436145] scsi0:A:1:0: Tagged Queuing enabled.  Depth 32
[    1.436226]  target0:0:1: Beginning Domain Validation
[    1.440886]  target0:0:1: wide asynchronous
[    1.444053]  target0:0:1: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset
31)
[    1.446464]  target0:0:1: Domain Validation skipping write tests
[    1.446509]  target0:0:1: Ending Domain Validation
[    2.996166] scsi 0:0:9:0: Direct-Access     QUANTUM  QM39100TD-SW
N491 PQ: 0 ANSI: 2
[    2.996224]  target0:0:9: asynchronous
[    2.996267] scsi0:A:9:0: Tagged Queuing enabled.  Depth 32
[    2.996347]  target0:0:9: Beginning Domain Validation
[    3.000824]  target0:0:9: wide asynchronous
[    3.004197]  target0:0:9: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset
31)
[    3.006565]  target0:0:9: Domain Validation skipping write tests
[    3.006610]  target0:0:9: Ending Domain Validation
[    4.550696] ACPI: PCI Interrupt 0000:04:03.1[B] -> GSI 33 (level, low) ->
IRQ 17
[    5.670712] scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
[    5.670714]         <Adaptec AIC7902 Ultra320 SCSI adapter>
[    5.670715]         aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X
101-133Mhz, 512 SCBs
[    5.670717] 
[   11.839403] scsi 1:0:13:0: CD-ROM            HL-DT-ST DVDRAM GSA-4160B
A300 PQ: 0 ANSI: 2
[   11.839462]  target1:0:13: asynchronous
[   11.839513]  target1:0:13: Beginning Domain Validation
[   11.855350]  target1:0:13: wide asynchronous
[   11.866981]  target1:0:13: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset
14)
[   11.878231]  target1:0:13: Domain Validation skipping write tests
[   11.878277]  target1:0:13: Ending Domain Validation
[   12.404878] SCSI device sda: 8888924 512-byte hdwr sectors (4551 MB)
[   12.408854] sda: Write Protect is off
[   12.408898] sda: Mode Sense: 9f 00 10 08
[   12.413080] SCSI device sda: drive cache: write back w/ FUA
[   12.415659] SCSI device sda: 8888924 512-byte hdwr sectors (4551 MB)
[   12.419610] sda: Write Protect is off
[   12.419653] sda: Mode Sense: 9f 00 10 08
[   12.423836] SCSI device sda: drive cache: write back w/ FUA
[   12.423881]  sda: sda1 sda2
[   12.440659] sd 0:0:0:0: Attached scsi disk sda
[   12.443705] SCSI device sdb: 17783250 512-byte hdwr sectors (9105 MB)
[   12.445824] sdb: Write Protect is off
[   12.445867] sdb: Mode Sense: e1 00 10 08
[   12.447628] SCSI device sdb: drive cache: write back w/ FUA
[   12.448400] SCSI device sdb: 17783250 512-byte hdwr sectors (9105 MB)
[   12.450768] sdb: Write Protect is off
[   12.450812] sdb: Mode Sense: e1 00 10 08
[   12.452574] SCSI device sdb: drive cache: write back w/ FUA
[   12.452619]  sdb: unknown partition table
[   12.453154] sd 0:0:1:0: Attached scsi disk sdb
[   12.456197] SCSI device sdc: 17783250 512-byte hdwr sectors (9105 MB)
[   12.458370] sdc: Write Protect is off
[   12.458413] sdc: Mode Sense: e1 00 10 08
[   12.460217] SCSI device sdc: drive cache: write back w/ FUA
[   12.460980] SCSI device sdc: 17783250 512-byte hdwr sectors (9105 MB)
[   12.463098] sdc: Write Protect is off
[   12.463141] sdc: Mode Sense: e1 00 10 08
[   12.464899] SCSI device sdc: drive cache: write back w/ FUA
[   12.464944]  sdc: unknown partition table
[   12.465467] sd 0:0:9:0: Attached scsi disk sdc
[   12.467860] serio: i8042 KBD port at 0x60,0x64 irq 1
[   12.467908] serio: i8042 AUX port at 0x60,0x64 irq 12
[   12.468036] mice: PS/2 mouse device common for all mice
[   12.468223] input: PC Speaker as /class/input/input0
[   12.488053] input: AT Translated Set 2 keyboard as /class/input/input1
[   12.653197] TCP cubic registered
[   12.653248] NET: Registered protocol family 1
[   12.653350] Starting balanced_irq
[   12.653408] Using IPI Shortcut mode
[   12.657074] Time: tsc clocksource has been installed.
[   12.759066] EXT3-fs: INFO: recovery required on readonly filesystem.
[   12.759114] EXT3-fs: write access will be enabled during recovery.
[   13.300716] kjournald starting.  Commit interval 5 seconds
[   13.300732] EXT3-fs: recovery complete.
[   13.322667] EXT3-fs: mounted filesystem with ordered data mode.
[   13.322769] VFS: Mounted root (ext3 filesystem) readonly.
[   13.323025] Freeing unused kernel memory: 208k freed
[   18.236341] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 48 (level, low) ->
IRQ 18
[   19.447683] scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[   19.447686]         <Adaptec 3960D Ultra160 SCSI adapter>
[   19.447688]         aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253
SCBs
[   19.447689] 
[   21.687533] scsi 2:0:0:0: Direct-Access     SEAGATE  SX150176LC
BA12 PQ: 0 ANSI: 2
[   21.687601] scsi2:A:0:0: Tagged Queuing enabled.  Depth 32
[   21.687690]  target2:0:0: Beginning Domain Validation
[   21.692983]  target2:0:0: wide asynchronous
[   21.696996]  target2:0:0: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset
15)
[   21.700265]  target2:0:0: Domain Validation skipping write tests
[   21.700311]  target2:0:0: Ending Domain Validation
[   21.707201] SCSI device sdd: 97693755 512-byte hdwr sectors (50019 MB)
[   21.709832] sdd: Write Protect is off
[   21.709889] sdd: Mode Sense: cb 00 10 08
[   21.712379] SCSI device sdd: drive cache: write through w/ FUA
[   21.713240] SCSI device sdd: 97693755 512-byte hdwr sectors (50019 MB)
[   21.715834] sdd: Write Protect is off
[   21.715880] sdd: Mode Sense: cb 00 10 08
[   21.718353] SCSI device sdd: drive cache: write through w/ FUA
[   21.718401]  sdd: unknown partition table
[   21.742790] sd 2:0:0:0: Attached scsi disk sdd
[   21.752477] scsi 2:0:1:0: Direct-Access     SEAGATE  SX150176LC
BA08 PQ: 0 ANSI: 2
[   21.752548] scsi2:A:1:0: Tagged Queuing enabled.  Depth 32
[   21.752653]  target2:0:1: Beginning Domain Validation
[   21.762443]  target2:0:1: wide asynchronous
[   21.767231]  target2:0:1: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset
15)
[   21.771093]  target2:0:1: Domain Validation skipping write tests
[   21.771143]  target2:0:1: Ending Domain Validation
[   21.775329] SCSI device sde: 97693755 512-byte hdwr sectors (50019 MB)
[   21.777516] sde: Write Protect is off
[   21.777564] sde: Mode Sense: cb 00 10 08
[   21.780113] SCSI device sde: drive cache: write through w/ FUA
[   21.781010] SCSI device sde: 97693755 512-byte hdwr sectors (50019 MB)
[   21.783747] sde: Write Protect is off
[   21.783809] sde: Mode Sense: cb 00 10 08
[   21.786377] SCSI device sde: drive cache: write through w/ FUA
[   21.786428]  sde: unknown partition table
[   21.805915] sd 2:0:1:0: Attached scsi disk sde
[   21.817669] scsi 2:0:2:0: Direct-Access     SEAGATE  SX150176LC
BA08 PQ: 0 ANSI: 2
[   21.817758] scsi2:A:2:0: Tagged Queuing enabled.  Depth 32
[   21.817857]  target2:0:2: Beginning Domain Validation
[   21.823531]  target2:0:2: wide asynchronous
[   21.829319]  target2:0:2: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset
15)
[   21.832716]  target2:0:2: Domain Validation skipping write tests
[   21.832768]  target2:0:2: Ending Domain Validation
[   21.838742] SCSI device sdf: 97693755 512-byte hdwr sectors (50019 MB)
[   21.844503] sdf: Write Protect is off
[   21.844562] sdf: Mode Sense: cb 00 10 08
[   21.848184] SCSI device sdf: drive cache: write through w/ FUA
[   21.849129] SCSI device sdf: 97693755 512-byte hdwr sectors (50019 MB)
[   21.851754] sdf: Write Protect is off
[   21.851798] sdf: Mode Sense: cb 00 10 08
[   21.854339] SCSI device sdf: drive cache: write through w/ FUA
[   21.854388]  sdf: unknown partition table
[   21.871229] sd 2:0:2:0: Attached scsi disk sdf
[   21.883201] scsi 2:0:3:0: Direct-Access     SEAGATE  SX150176LC
BA12 PQ: 0 ANSI: 2
[   21.883286] scsi2:A:3:0: Tagged Queuing enabled.  Depth 32
[   21.883401]  target2:0:3: Beginning Domain Validation
[   21.888902]  target2:0:3: wide asynchronous
[   21.893187]  target2:0:3: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset
15)
[   21.896573]  target2:0:3: Domain Validation skipping write tests
[   21.896623]  target2:0:3: Ending Domain Validation
[   21.907010] SCSI device sdg: 97693755 512-byte hdwr sectors (50019 MB)
[   21.909659] sdg: Write Protect is off
[   21.909716] sdg: Mode Sense: cb 00 10 08
[   21.912238] SCSI device sdg: drive cache: write through w/ FUA
[   21.913085] SCSI device sdg: 97693755 512-byte hdwr sectors (50019 MB)
[   21.915738] sdg: Write Protect is off
[   21.915827] sdg: Mode Sense: cb 00 10 08
[   21.918391] SCSI device sdg: drive cache: write through w/ FUA
[   21.918444]  sdg: unknown partition table
[   21.936874] sd 2:0:3:0: Attached scsi disk sdg
[   21.942181] scsi 2:0:4:0: Direct-Access     SEAGATE  SX150176LC
BA12 PQ: 0 ANSI: 2
[   21.942279] scsi2:A:4:0: Tagged Queuing enabled.  Depth 32
[   21.942398]  target2:0:4: Beginning Domain Validation
[   21.948010]  target2:0:4: wide asynchronous
[   21.952283]  target2:0:4: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset
15)
[   21.955659]  target2:0:4: Domain Validation skipping write tests
[   21.955724]  target2:0:4: Ending Domain Validation
[   21.961746] SCSI device sdh: 97693755 512-byte hdwr sectors (50019 MB)
[   21.964417] sdh: Write Protect is off
[   21.964490] sdh: Mode Sense: cb 00 10 08
[   21.967099] SCSI device sdh: drive cache: write through w/ FUA
[   21.968045] SCSI device sdh: 97693755 512-byte hdwr sectors (50019 MB)
[   21.970696] sdh: Write Protect is off
[   21.970765] sdh: Mode Sense: cb 00 10 08
[   21.973339] SCSI device sdh: drive cache: write through w/ FUA
[   21.973412]  sdh: unknown partition table
[   21.991326] sd 2:0:4:0: Attached scsi disk sdh
[   24.078966] scsi 2:0:14:0: Processor         SYMBIOS  SYM2000          2
PQ: 0 ANSI: 2
[   24.079058]  target2:0:14: Beginning Domain Validation
[   24.079519]  target2:0:14: Ending Domain Validation
[   24.354730] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 49 (level, low) ->
IRQ 19
[   25.566346] scsi3 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[   25.566349]         <Adaptec 3960D Ultra160 SCSI adapter>
[   25.566350]         aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253
SCBs
[   25.566352] 
[   27.781555] scsi 3:0:0:0: Direct-Access     SEAGATE  SX150176LC
BA08 PQ: 0 ANSI: 2
[   27.781623] scsi3:A:0:0: Tagged Queuing enabled.  Depth 32
[   27.781711]  target3:0:0: Beginning Domain Validation
[   27.787035]  target3:0:0: wide asynchronous
[   27.791300]  target3:0:0: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset
15)
[   27.794607]  target3:0:0: Domain Validation skipping write tests
[   27.794653]  target3:0:0: Ending Domain Validation
[   27.804053] SCSI device sdi: 97693755 512-byte hdwr sectors (50019 MB)
[   27.806283] sdi: Write Protect is off
[   27.806344] sdi: Mode Sense: cb 00 10 08
[   27.808916] SCSI device sdi: drive cache: write through w/ FUA
[   27.809872] SCSI device sdi: 97693755 512-byte hdwr sectors (50019 MB)
[   27.816625] sdi: Write Protect is off
[   27.816689] sdi: Mode Sense: cb 00 10 08
[   27.819272] SCSI device sdi: drive cache: write through w/ FUA
[   27.819325]  sdi: unknown partition table
[   27.841870] sd 3:0:0:0: Attached scsi disk sdi
[   27.852720] scsi 3:0:1:0: Direct-Access     SEAGATE  SX150176LC
BA08 PQ: 0 ANSI: 2
[   27.852809] scsi3:A:1:0: Tagged Queuing enabled.  Depth 32
[   27.852916]  target3:0:1: Beginning Domain Validation
[   27.866711]  target3:0:1: wide asynchronous
[   27.871821]  target3:0:1: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset
15)
[   27.875135]  target3:0:1: Domain Validation skipping write tests
[   27.875181]  target3:0:1: Ending Domain Validation
[   27.890022] SCSI device sdj: 97693755 512-byte hdwr sectors (50019 MB)
[   27.892268] sdj: Write Protect is off
[   27.892323] sdj: Mode Sense: cb 00 10 08
[   27.895199] SCSI device sdj: drive cache: write through w/ FUA
[   27.896112] SCSI device sdj: 97693755 512-byte hdwr sectors (50019 MB)
[   27.898787] sdj: Write Protect is off
[   27.898850] sdj: Mode Sense: cb 00 10 08
[   27.901454] SCSI device sdj: drive cache: write through w/ FUA
[   27.901506]  sdj: unknown partition table
[   27.921451] sd 3:0:1:0: Attached scsi disk sdj
[   27.931099] scsi 3:0:2:0: Direct-Access     SEAGATE  SX150176LC
BA08 PQ: 0 ANSI: 2
[   27.931193] scsi3:A:2:0: Tagged Queuing enabled.  Depth 32
[   27.931326]  target3:0:2: Beginning Domain Validation
[   27.937886]  target3:0:2: wide asynchronous
[   27.942743]  target3:0:2: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset
15)
[   27.946112]  target3:0:2: Domain Validation skipping write tests
[   27.946165]  target3:0:2: Ending Domain Validation
[   27.954710] SCSI device sdk: 97693755 512-byte hdwr sectors (50019 MB)
[   27.956961] sdk: Write Protect is off
[   27.957016] sdk: Mode Sense: cb 00 10 08
[   27.959621] SCSI device sdk: drive cache: write through w/ FUA
[   27.960671] SCSI device sdk: 97693755 512-byte hdwr sectors (50019 MB)
[   27.963366] sdk: Write Protect is off
[   27.963421] sdk: Mode Sense: cb 00 10 08
[   27.965999] SCSI device sdk: drive cache: write through w/ FUA
[   27.966055]  sdk: unknown partition table
[   27.989870] sd 3:0:2:0: Attached scsi disk sdk
[   27.998923] scsi 3:0:3:0: Direct-Access     SEAGATE  SX150176LC
BA08 PQ: 0 ANSI: 2
[   27.999020] scsi3:A:3:0: Tagged Queuing enabled.  Depth 32
[   27.999141]  target3:0:3: Beginning Domain Validation
[   28.008953]  target3:0:3: wide asynchronous
[   28.013204]  target3:0:3: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset
15)
[   28.016557]  target3:0:3: Domain Validation skipping write tests
[   28.016608]  target3:0:3: Ending Domain Validation
[   28.019765] SCSI device sdl: 97693755 512-byte hdwr sectors (50019 MB)
[   28.021960] sdl: Write Protect is off
[   28.022020] sdl: Mode Sense: cb 00 10 08
[   28.027129] SCSI device sdl: drive cache: write through w/ FUA
[   28.028045] SCSI device sdl: 97693755 512-byte hdwr sectors (50019 MB)
[   28.030768] sdl: Write Protect is off
[   28.030832] sdl: Mode Sense: cb 00 10 08
[   28.033415] SCSI device sdl: drive cache: write through w/ FUA
[   28.033475]  sdl: unknown partition table
[   28.049196] sd 3:0:3:0: Attached scsi disk sdl
[   28.054520] scsi 3:0:4:0: Direct-Access     SEAGATE  SX150176LC
BA08 PQ: 0 ANSI: 2
[   28.054619] scsi3:A:4:0: Tagged Queuing enabled.  Depth 32
[   28.054740]  target3:0:4: Beginning Domain Validation
[   28.060309]  target3:0:4: wide asynchronous
[   28.064449]  target3:0:4: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset
15)
[   28.067829]  target3:0:4: Domain Validation skipping write tests
[   28.067881]  target3:0:4: Ending Domain Validation
[   28.072728] SCSI device sdm: 97693755 512-byte hdwr sectors (50019 MB)
[   28.074966] sdm: Write Protect is off
[   28.075031] sdm: Mode Sense: cb 00 10 08
[   28.077684] SCSI device sdm: drive cache: write through w/ FUA
[   28.078732] SCSI device sdm: 97693755 512-byte hdwr sectors (50019 MB)
[   28.081455] sdm: Write Protect is off
[   28.081523] sdm: Mode Sense: cb 00 10 08
[   28.084151] SCSI device sdm: drive cache: write through w/ FUA
[   28.084213]  sdm: unknown partition table
[   28.100025] sd 3:0:4:0: Attached scsi disk sdm
[   30.158852] scsi 3:0:14:0: Processor         SYMBIOS  SYM2000          2
PQ: 0 ANSI: 2
[   30.158933]  target3:0:14: Beginning Domain Validation
[   30.159346]  target3:0:14: Ending Domain Validation
[   30.450736] ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 16 (level, low) ->
IRQ 20
[   31.461045] scsi4 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[   31.461048]         <Adaptec 2940/DUAL Ultra SCSI adapter>
[   31.461050]         aic7895: Ultra Wide Channel A, SCSI Id=7, 32/253 SCBs
[   31.461051] 
[   32.009752] scsi 4:0:2:0: CD-ROM            PLEXTOR  CD-ROM PX-40TS
1.11 PQ: 0 ANSI: 2
[   32.009882]  target4:0:2: Beginning Domain Validation
[   32.014686]  target4:0:2: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 15)
[   32.017640]  target4:0:2: Domain Validation skipping write tests
[   32.017695]  target4:0:2: Ending Domain Validation
[   32.040376] scsi 4:0:3:0: CD-ROM            PLEXTOR  CD-R   PX-W4012S
1.01 PQ: 0 ANSI: 2
[   32.040472]  target4:0:3: Beginning Domain Validation
[   32.042879]  target4:0:3: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 15)
[   32.044431]  target4:0:3: Domain Validation skipping write tests
[   32.044490]  target4:0:3: Ending Domain Validation
[   32.062090] scsi 4:0:4:0: CD-ROM            NAKAMICH MJ-5.16S
1.07 PQ: 0 ANSI: 2
[   32.062204]  target4:0:4: Beginning Domain Validation
[   32.067703]  target4:0:4: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
[   32.070777]  target4:0:4: Domain Validation skipping write tests
[   32.070829]  target4:0:4: Ending Domain Validation
[   32.080961] scsi 4:0:4:1: CD-ROM            NAKAMICH MJ-5.16S
1.07 PQ: 0 ANSI: 2
[   32.081055]  target4:0:4: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
[   32.094088] scsi 4:0:4:2: CD-ROM            NAKAMICH MJ-5.16S
1.07 PQ: 0 ANSI: 2
[   32.094181]  target4:0:4: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
[   32.106980] scsi 4:0:4:3: CD-ROM            NAKAMICH MJ-5.16S
1.07 PQ: 0 ANSI: 2
[   32.107102]  target4:0:4: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
[   32.118312] scsi 4:0:4:4: CD-ROM            NAKAMICH MJ-5.16S
1.07 PQ: 0 ANSI: 2
[   32.118423]  target4:0:4: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
[   32.139326] scsi 4:0:5:0: CD-ROM            YAMAHA   CRW8424S
1.0d PQ: 0 ANSI: 2
[   32.139474]  target4:0:5: Beginning Domain Validation
[   32.155331]  target4:0:5: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 15)
[   32.165552]  target4:0:5: Domain Validation skipping write tests
[   32.165619]  target4:0:5: Ending Domain Validation
[   34.542463] ACPI: PCI Interrupt 0000:05:01.1[B] -> GSI 17 (level, low) ->
IRQ 21
[   35.552159] scsi5 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[   35.552162]         <Adaptec 2940/DUAL Ultra SCSI adapter>
[   35.552164]         aic7895: Ultra Single Channel B, SCSI Id=7, 32/253
SCBs
[   35.552165] 
[   50.252880] EXT3 FS on sda1, internal journal
[   53.188367] Intel(R) PRO/1000 Network Driver - version 7.2.9-k4
[   53.188445] Copyright (c) 1999-2006 Intel Corporation.
[   53.192470] ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 54 (level, low) ->
IRQ 22
[   53.466611] e1000: 0000:03:03.0: e1000_probe: (PCI:66MHz:64-bit)
00:30:48:73:b9:cb
[   53.501760] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network
Connection
[   53.598803] netconsole: local port 4321
[   53.598866] netconsole: local IP 192.168.2.7
[   53.598914] netconsole: interface eth0
[   53.598960] netconsole: remote port 1234
[   53.599006] netconsole: remote IP 192.168.2.15
[   53.599056] netconsole: remote ethernet address 00:10:5a:21:9b:be
[   53.599109] netconsole: device eth0 not up yet, forcing it
[   56.591864] e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full
Duplex
[   56.626868] netconsole: network logging started
[   56.681017] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) ->
IRQ 21
[   57.359779] md: raid1 personality registered for level 1
[   57.417471] raid5: automatically using best checksumming function:
pIII_sse
[   57.434914]    pIII_sse  :  3305.000 MB/sec
[   57.434984] raid5: using function: pIII_sse (3305.000 MB/sec)
[   57.546953] raid6: int32x1    618 MB/s
[   57.614927] raid6: int32x2    719 MB/s
[   57.682892] raid6: int32x4    668 MB/s
[   57.750965] raid6: int32x8    473 MB/s
[   57.818833] raid6: mmxx1     2047 MB/s
[   57.886818] raid6: mmxx2     2630 MB/s
[   57.954817] raid6: sse1x1    1136 MB/s
[   58.022806] raid6: sse1x2    1062 MB/s
[   58.090768] raid6: sse2x1    2041 MB/s
[   58.158748] raid6: sse2x2    2911 MB/s
[   58.158793] raid6: using algorithm sse2x2 (2911 MB/s)
[   58.158842] md: raid6 personality registered for level 6
[   58.158888] md: raid5 personality registered for level 5
[   58.158934] md: raid4 personality registered for level 4
[   59.173609] device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised:
dm-devel@redhat.com
[   61.357392] md: bind<sdd>
[   61.373439] md: bind<sde>
[   61.387336] md: bind<sdf>
[   61.402219] md: bind<sdg>
[   61.407919] md: bind<sdh>
[   61.423371] md: bind<sdi>
[   61.441688] md: bind<sdj>
[   61.461825] md: bind<sdk>
[   61.465305] md: bind<sdl>
[   61.482296] md: bind<sdm>
[   61.492627] raid5: device sdm operational as raid disk 9
[   61.492684] raid5: device sdl operational as raid disk 8
[   61.492730] raid5: device sdk operational as raid disk 7
[   61.492776] raid5: device sdj operational as raid disk 6
[   61.492822] raid5: device sdi operational as raid disk 5
[   61.492878] raid5: device sdh operational as raid disk 4
[   61.492924] raid5: device sdg operational as raid disk 3
[   61.492973] raid5: device sdf operational as raid disk 2
[   61.493019] raid5: device sde operational as raid disk 1
[   61.493064] raid5: device sdd operational as raid disk 0
[   61.493919] raid5: allocated 10438kB for md0
[   61.493970] raid5: raid level 5 set md0 active with 10 out of 10 devices,
algorithm 0
[   61.494024] RAID5 conf printout:
[   61.494067]  --- rd:10 wd:10
[   61.494115]  disk 0, o:1, dev:sdd
[   61.494159]  disk 1, o:1, dev:sde
[   61.494202]  disk 2, o:1, dev:sdf
[   61.494248]  disk 3, o:1, dev:sdg
[   61.494291]  disk 4, o:1, dev:sdh
[   61.494338]  disk 5, o:1, dev:sdi
[   61.494381]  disk 6, o:1, dev:sdj
[   61.494437]  disk 7, o:1, dev:sdk
[   61.494484]  disk 8, o:1, dev:sdl
[   61.494528]  disk 9, o:1, dev:sdm
[   61.638169] md: bind<sdb>
[   61.650445] md: bind<sdc>
[   61.668979] raid1: raid set md1 active with 2 out of 2 mirrors
[   86.733733] ReiserFS: dm-5: found reiserfs format "3.6" with standard
journal
[   86.733801] ReiserFS: dm-5: using ordered data mode
[   86.739097] ReiserFS: dm-5: journal params: device dm-5, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit age
30, max trans age 30
[   86.740289] ReiserFS: dm-5: checking transaction log (dm-5)
[   86.864654] ReiserFS: dm-5: Using r5 hash to sort names
[   86.917196] ReiserFS: dm-6: found reiserfs format "3.6" with standard
journal
[   86.917264] ReiserFS: dm-6: using ordered data mode
[   86.922419] ReiserFS: dm-6: journal params: device dm-6, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit age
30, max trans age 30
[   86.923635] ReiserFS: dm-6: checking transaction log (dm-6)
[   86.989879] ReiserFS: dm-6: Using r5 hash to sort names
[   87.026297] ReiserFS: dm-3: found reiserfs format "3.6" with standard
journal
[   87.026366] ReiserFS: dm-3: using ordered data mode
[   87.031477] ReiserFS: dm-3: journal params: device dm-3, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit age
30, max trans age 30
[   87.032729] ReiserFS: dm-3: checking transaction log (dm-3)
[   87.072320] ReiserFS: dm-3: Using r5 hash to sort names
[   87.130105] ReiserFS: sda2: found reiserfs format "3.6" with standard
journal
[   87.130177] ReiserFS: sda2: using ordered data mode
[   87.140192] ReiserFS: sda2: journal params: device sda2, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit age
30, max trans age 30
[   87.141394] ReiserFS: sda2: checking transaction log (sda2)
[   87.217624] ReiserFS: sda2: Using r5 hash to sort names
[   87.338255] ReiserFS: md1: found reiserfs format "3.6" with standard
journal
[   87.338326] ReiserFS: md1: using ordered data mode
[   87.345881] ReiserFS: md1: journal params: device md1, size 8192, journal
first block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
[   87.347063] ReiserFS: md1: checking transaction log (md1)
[   87.437662] ReiserFS: md1: Using r5 hash to sort names
[   87.498509] ReiserFS: dm-4: found reiserfs format "3.6" with standard
journal
[   87.498585] ReiserFS: dm-4: using ordered data mode
[   87.506235] ReiserFS: dm-4: journal params: device dm-4, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit age
30, max trans age 30
[   87.507448] ReiserFS: dm-4: checking transaction log (dm-4)
[   87.635480] ReiserFS: dm-4: Using r5 hash to sort names
[   87.712688] ReiserFS: dm-0: warning: read_super_block: found reiserfs
format "3.6" with non-standard journal
[   87.712783] ReiserFS: dm-0: using ordered data mode
[   87.722188] ReiserFS: dm-0: journal params: device dm-0, size 1023,
journal first block 18, max trans len 511, max batch 449, max commit age 30,
max trans age 30
[   87.722415] ReiserFS: dm-0: checking transaction log (dm-0)
[   87.753145] ReiserFS: dm-0: Using r5 hash to sort names
[   87.800729] kjournald starting.  Commit interval 5 seconds
[   87.821032] EXT3 FS on dm-1, internal journal
[   87.821128] EXT3-fs: mounted filesystem with ordered data mode.
[   87.821625] ReiserFS: dm-2: found reiserfs format "3.6" with standard
journal
[   87.821699] ReiserFS: dm-2: using ordered data mode
[   87.821878] ReiserFS: dm-2: journal params: device dm-2, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit age
30, max trans age 30
[   87.823111] ReiserFS: dm-2: checking transaction log (dm-2)
[   87.865241] ReiserFS: dm-2: Using r5 hash to sort names
[   88.296742] ip_tables: (C) 2000-2006 Netfilter Core Team
[   88.608163] ip_conntrack version 2.4 (8187 buckets, 65496 max) - 212
bytes per conntrack
[   91.812047] Linux agpgart interface v0.101 (c) Dave Jones
[   91.835035] agpgart: Detected an Intel E7505 Chipset.
[   91.849782] agpgart: AGP aperture is 128M @ 0xd8000000
[   92.569925] usbcore: registered new interface driver usbfs
[   92.571634] usbcore: registered new interface driver hub
[   92.583991] usbcore: registered new device driver usb
[   92.611747] USB Universal Host Controller Interface driver v3.0
[   92.626303] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) ->
IRQ 20
[   92.626438] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   92.626445] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   92.626952] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 1
[   92.627067] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00002440
[   92.646968] usb usb1: configuration #1 chosen from 1 choice
[   92.664368] hub 1-0:1.0: USB hub found
[   92.664467] hub 1-0:1.0: 2 ports detected
[   92.780087] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) ->
IRQ 23
[   92.780965] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   92.780978] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   92.781372] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 2
[   92.781524] uhci_hcd 0000:00:1d.1: irq 23, io base 0x00002460
[   92.807622] usb usb2: configuration #1 chosen from 1 choice
[   92.845292] hub 2-0:1.0: USB hub found
[   92.852374] hub 2-0:1.0: 2 ports detected
[   92.971624] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) ->
IRQ 24
[   92.971750] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   92.971757] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   92.996425] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 3
[   92.996540] uhci_hcd 0000:00:1d.2: irq 24, io base 0x00002480
[   93.039622] usb usb3: configuration #1 chosen from 1 choice
[   93.082249] hub 3-0:1.0: USB hub found
[   93.082351] hub 3-0:1.0: 2 ports detected
[   93.211473] usb 2-1: new full speed USB device using uhci_hcd and address
2
[   93.387512] usb 2-1: configuration #1 chosen from 1 choice
[   93.393563] hub 2-1:1.0: USB hub found
[   93.395391] hub 2-1:1.0: 3 ports detected
[   93.747344] usb 3-1: new full speed USB device using uhci_hcd and address
2
[   93.920565] usb 3-1: configuration #1 chosen from 1 choice
[   93.927450] hub 3-1:1.0: USB hub found
[   93.930254] hub 3-1:1.0: 4 ports detected
[   94.244996] usb 2-1.1: new full speed USB device using uhci_hcd and
address 3
[   94.385306] usb 2-1.1: configuration #1 chosen from 1 choice
[   94.636817] usb 2-1.3: new low speed USB device using uhci_hcd and
address 4
[   94.774151] usb 2-1.3: configuration #1 chosen from 1 choice
[   97.878771] usbcore: registered new interface driver hiddev
[   97.897740] input: Dell Dell USB Keyboard as /class/input/input2
[   97.897876] input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on
usb-0000:00:1d.1-1.1
[   97.921761] input: Dell Dell USB Keyboard as /class/input/input3
[   97.921874] input: USB HID v1.10 Device [Dell Dell USB Keyboard] on
usb-0000:00:1d.1-1.1
[   97.934827] input: Logitech USB-PS/2 Optical Mouse as /class/input/input4
[   97.935057] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse]
on usb-0000:00:1d.1-1.3
[   97.935223] usbcore: registered new interface driver usbhid
[   97.935288] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[   99.026249] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) ->
IRQ 25
[   99.026415] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   99.026422] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   99.026765] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 4
[   99.026927] ehci_hcd 0000:00:1d.7: debug port 1
[   99.027003] PCI: cache line size of 128 is not supported by device
0000:00:1d.7
[   99.027021] ehci_hcd 0000:00:1d.7: irq 25, io mem 0xd0000000
[   99.030963] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10
Dec 2004
[   99.044762] usb usb4: configuration #1 chosen from 1 choice
[   99.046373] hub 4-0:1.0: USB hub found
[   99.046478] hub 4-0:1.0: 6 ports detected
[   99.586052] usb 4-5: new high speed USB device using ehci_hcd and address
3
[   99.720108] usb 4-5: configuration #1 chosen from 1 choice
[   99.720634] hub 4-5:1.0: USB hub found
[   99.721074] hub 4-5:1.0: 4 ports detected
[   99.830222] usb 3-1: USB disconnect, address 2
[   99.974030] usb 2-1: USB disconnect, address 2
[   99.974123] usb 2-1.1: USB disconnect, address 3
[  100.012259] usb 2-1.3: USB disconnect, address 4
[  100.325914] usb 2-1: new full speed USB device using uhci_hcd and address
5
[  100.511410] usb 2-1: configuration #1 chosen from 1 choice
[  100.517411] hub 2-1:1.0: USB hub found
[  100.519192] hub 2-1:1.0: 3 ports detected
[  100.831023] usb 2-1.1: new full speed USB device using uhci_hcd and
address 6
[  100.967424] usb 2-1.1: configuration #1 chosen from 1 choice
[  100.992955] input: Dell Dell USB Keyboard as /class/input/input5
[  100.993059] input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on
usb-0000:00:1d.1-1.1
[  101.021903] input: Dell Dell USB Keyboard as /class/input/input6
[  101.022035] input: USB HID v1.10 Device [Dell Dell USB Keyboard] on
usb-0000:00:1d.1-1.1
[  101.250845] usb 2-1.3: new low speed USB device using uhci_hcd and
address 7
[  101.400074] usb 2-1.3: configuration #1 chosen from 1 choice
[  101.416128] input: Logitech USB-PS/2 Optical Mouse as /class/input/input7
[  101.416404] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse]
on usb-0000:00:1d.1-1.3
[  103.502556] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[  103.502644] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[  103.547432] ICH4: IDE controller at PCI slot 0000:00:1f.1
[  103.547530] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) ->
IRQ 24
[  103.547658] ICH4: chipset revision 2
[  103.547715] ICH4: not 100% native mode: will probe irqs later
[  103.547789]     ide0: BM-DMA at 0x24a0-0x24a7, BIOS settings: hda:DMA,
hdb:pio
[  103.547979]     ide1: BM-DMA at 0x24a8-0x24af, BIOS settings: hdc:pio,
hdd:pio
[  103.548131] Probing IDE interface ide0...
[  104.569105] hda: ATAPI CDROM, ATAPI CD/DVD-ROM drive
[  104.905096] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[  104.905358] Probing IDE interface ide1...
[  106.117242] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) ->
IRQ 21
[  106.117373] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[  106.432539] intel8x0_measure_ac97_clock: measured 52769 usecs
[  106.432595] intel8x0: clocking to 48000
[  115.215184] ide-scsi is deprecated for cd burning! Use ide-cd and give
dev=/dev/hdX as device
[  115.215310] scsi6 : SCSI host adapter emulation for IDE ATAPI devices
[  115.215964] scsi 6:0:0:0: CD-ROM                     ATAPI CDROM. 
100A PQ: 0 ANSI: 0 CCS
[  115.380052] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2
cdda tray
[  115.380152] Uniform CD-ROM driver Revision: 3.20
[  115.380718] sr 1:0:13:0: Attached scsi CD-ROM sr0
[  115.386182] sr1: scsi-1 drive
[  115.390675] sr 4:0:2:0: Attached scsi CD-ROM sr1
[  115.393588] sr2: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[  115.394624] sr 4:0:3:0: Attached scsi CD-ROM sr2
[  115.399817] sr3: scsi3-mmc drive: 16x/16x xa/form2 cdda changer
[  115.426129] sr 4:0:4:0: Attached scsi CD-ROM sr3
[  115.436188] sr4: scsi3-mmc drive: 16x/16x xa/form2 cdda changer
[  115.454056] sr 4:0:4:1: Attached scsi CD-ROM sr4
[  115.459314] sr5: scsi3-mmc drive: 16x/16x xa/form2 cdda changer
[  115.478654] sr 4:0:4:2: Attached scsi CD-ROM sr5
[  115.484218] sr6: scsi3-mmc drive: 16x/16x xa/form2 cdda changer
[  115.506702] sr 4:0:4:3: Attached scsi CD-ROM sr6
[  115.511989] sr7: scsi3-mmc drive: 16x/16x xa/form2 cdda changer
[  115.528195] sr 4:0:4:4: Attached scsi CD-ROM sr7
[  115.551908] sr8: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[  115.568819] sr 4:0:5:0: Attached scsi CD-ROM sr8
[  115.570326] sr9: scsi-1 drive
[  115.597729] sr 6:0:0:0: Attached scsi CD-ROM sr9
[  115.744116] sd 0:0:0:0: Attached scsi generic sg0 type 0
[  115.754534] sd 0:0:1:0: Attached scsi generic sg1 type 0
[  115.762560] sd 0:0:9:0: Attached scsi generic sg2 type 0
[  115.795865] sr 1:0:13:0: Attached scsi generic sg3 type 5
[  115.808705] sd 2:0:0:0: Attached scsi generic sg4 type 0
[  115.812880] sd 2:0:1:0: Attached scsi generic sg5 type 0
[  115.826400] sd 2:0:2:0: Attached scsi generic sg6 type 0
[  115.843572] sd 2:0:3:0: Attached scsi generic sg7 type 0
[  115.858501] sd 2:0:4:0: Attached scsi generic sg8 type 0
[  115.861462] scsi 2:0:14:0: Attached scsi generic sg9 type 3
[  115.863652] sd 3:0:0:0: Attached scsi generic sg10 type 0
[  115.875876] sd 3:0:1:0: Attached scsi generic sg11 type 0
[  115.884915] sd 3:0:2:0: Attached scsi generic sg12 type 0
[  115.891015] sd 3:0:3:0: Attached scsi generic sg13 type 0
[  115.919991] sd 3:0:4:0: Attached scsi generic sg14 type 0
[  115.933426] scsi 3:0:14:0: Attached scsi generic sg15 type 3
[  115.950479] sr 4:0:2:0: Attached scsi generic sg16 type 5
[  115.952236] sr 4:0:3:0: Attached scsi generic sg17 type 5
[  115.987777] sr 4:0:4:0: Attached scsi generic sg18 type 5
[  116.004495] sr 4:0:4:1: Attached scsi generic sg19 type 5
[  116.005215] sr 4:0:4:2: Attached scsi generic sg20 type 5
[  116.024151] sr 4:0:4:3: Attached scsi generic sg21 type 5
[  116.034343] sr 4:0:4:4: Attached scsi generic sg22 type 5
[  116.078676] sr 4:0:5:0: Attached scsi generic sg23 type 5
[  116.102233] sr 6:0:0:0: Attached scsi generic sg24 type 5
[  122.126324] tun: Universal TUN/TAP device driver, 1.6
[  122.126406] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[  123.088556] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[  130.247037] [drm] Initialized drm 1.0.1 20051102
[  130.284254] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 21 (level, low) ->
IRQ 26
[  130.284924] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[  131.670528] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[  131.670555] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[  131.670593] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[  131.979309] [drm] Setting GART location based on new memory map
[  131.979328] [drm] Loading R200 Microcode
[  131.979372] [drm] writeback test succeeded in 1 usecs

-- 
 Lab tests show that use of micro$oft causes cancer in lab animals
 Got Gas???

Re: AIC7xxx on 2.6.18

[Mark Rustad]

On Feb 2, 2007, at 6:42 PM, Wakko Warner wrote:

> Andrew Morton wrote:
>> Yes, getting the oops traces will help, thanks.  And confirmation  
>> on a more recent kernel would be good.
>
> Here's what I get.  I used netconsole so whatever was logged prior  
> to it
> starting was lost.
>
> The PC is a suprtmicro x5da8 with an onboard dual channel AHA-39320  
> u320
> controller.  I have a dual channel AHA-39160 u160 and a dual channel
> AHA-2940U/UW (ch0/internal is wide/narrow, ch1/externel is narrow).

I have used an x6-class Supermicro motherboard with the Adaptec u320  
controller and I had problems hot-swapping drives with 2.6.18. It  
seemed that the bus reset that the backplane processor generated  
caused trouble for the driver, killing the SCSI bus. 2.6.16 and  
2.6.17 locked up the kernel in the case of hot-swapping drives.

I switched to 2.6.19.2 and things are better. I did find that a card  
dump is produced when hot-inserting a drive, so it is way noisier  
than I think it should be, but it continues to operate and life goes  
on, which is much better behavior than 2.6.16, 2.6.17 or 2.6.18.

> I thought it was because I had option roms turned off, but when I  
> turned
> them on, it still has problems.  What's odd is the fact that if I  
> boot with init=/bin/sh, modprobe aic7xxx, it works fine and I can  
> exec init and it works fine.

I don't know what is up with that, but based on what I have seen I  
would recommend using 2.6.19.x instead of 2.6.18 for systems using  
the aic79xx driver.

-- 
Mark Rustad, MRustad@gmail.com

Re: AIC7xxx on 2.6.18

[Sean Bruno]

On Fri, 2007-02-02 at 23:12 -0600, Mark Rustad wrote:
> On Feb 2, 2007, at 6:42 PM, Wakko Warner wrote:
> 
> > Andrew Morton wrote:
> >> Yes, getting the oops traces will help, thanks.  And confirmation  
> >> on a more recent kernel would be good.
> >
> > Here's what I get.  I used netconsole so whatever was logged prior  
> > to it
> > starting was lost.
> >
> > The PC is a suprtmicro x5da8 with an onboard dual channel AHA-39320  
> > u320
> > controller.  I have a dual channel AHA-39160 u160 and a dual channel
> > AHA-2940U/UW (ch0/internal is wide/narrow, ch1/externel is narrow).
> 
> I have used an x6-class Supermicro motherboard with the Adaptec u320  
> controller and I had problems hot-swapping drives with 2.6.18. It  
> seemed that the bus reset that the backplane processor generated  
> caused trouble for the driver, killing the SCSI bus. 2.6.16 and  
> 2.6.17 locked up the kernel in the case of hot-swapping drives.
> 
> I switched to 2.6.19.2 and things are better. I did find that a card  
> dump is produced when hot-inserting a drive, so it is way noisier  
> than I think it should be, but it continues to operate and life goes  
> on, which is much better behavior than 2.6.16, 2.6.17 or 2.6.18.
> 
> > I thought it was because I had option roms turned off, but when I  
> > turned
> > them on, it still has problems.  What's odd is the fact that if I  
> > boot with init=/bin/sh, modprobe aic7xxx, it works fine and I can  
> > exec init and it works fine.
> 
> I don't know what is up with that, but based on what I have seen I  
> would recommend using 2.6.19.x instead of 2.6.18 for systems using  
> the aic79xx driver.
> 

Wasn't the original complaint in reference to the aic7xxx driver not
aic79xxx?

Sean

Re: AIC7xxx on 2.6.18

[Wakko Warner]

Please keep me in CC, I'm not on the list.

Mark Rustad wrote:
> On Feb 2, 2007, at 6:42 PM, Wakko Warner wrote:
> >The PC is a suprtmicro x5da8 with an onboard dual channel AHA-39320  
> >u320
> >controller.  I have a dual channel AHA-39160 u160 and a dual channel
> >AHA-2940U/UW (ch0/internal is wide/narrow, ch1/externel is narrow).
> 
> I have used an x6-class Supermicro motherboard with the Adaptec u320  
> controller and I had problems hot-swapping drives with 2.6.18. It  

This wasn't about hot swapping in my case.  On the hot swapping thing, I've
never successfully done this with a 2.6 kernel.

> seemed that the bus reset that the backplane processor generated  
> caused trouble for the driver, killing the SCSI bus. 2.6.16 and  
> 2.6.17 locked up the kernel in the case of hot-swapping drives.

I have a scsi box that supports hot plug.  I had a drive failing and I
decided to just replace it, took down the entire bus and the raid array with
it, fortunately, nothing lost.  This was with the dual u160 card.

> I switched to 2.6.19.2 and things are better. I did find that a card  
> dump is produced when hot-inserting a drive, so it is way noisier  
> than I think it should be, but it continues to operate and life goes  
> on, which is much better behavior than 2.6.16, 2.6.17 or 2.6.18.

I've never bothered with the 2.6.x.x kernels.  Yet =)

> >I thought it was because I had option roms turned off, but when I  
> >turned
> >them on, it still has problems.  What's odd is the fact that if I  
> >boot with init=/bin/sh, modprobe aic7xxx, it works fine and I can  
> >exec init and it works fine.
> 
> I don't know what is up with that, but based on what I have seen I  
> would recommend using 2.6.19.x instead of 2.6.18 for systems using  
> the aic79xx driver.

As stated in the email, it was the aic7xxx driver.  I've never had problems
with the u320 driver that I recall since I've had this machine.  It appears
that when I load aic7xxx, it finds both channels of the u160 card and all
it's devices, then when it hits the 2940u/uw card, it loads the first
channel, all devices and crashes before it hits the 2nd channel.  It looked
like it had problems with the plextor cdrw thats on ID2.

But the odd thing is, if I boot to /bin/sh, insmod aic7xxx, and exec init,
everything's fine.

-- 
 Lab tests show that use of micro$oft causes cancer in lab animals
 Got Gas???

Re: AIC7xxx on 2.6.18

[James Bottomley]

On Fri, 2007-02-02 at 19:42 -0500, Wakko Warner wrote:
> [   40.154122] ACPI: PCI Interrupt 0000:05:01.1[B] -> GSI 17 (level,
> low) -> IRQ 22
> [   40.158190] scsi4: PCI error Interrupt at seqaddr = 0x1bb
> [   40.158261] scsi4: Signaled a Target Abort

Well, this is the source of the problem.  It means the driver detected
an error in the PCI system.  I'm afraid I don't know what a PCI target
error is, but I think it means something is wrong with the PCI bus in
your system.  There's also a screaming interrupt, because the first 500
interrupts will be ignored before it looks at the bus error register.

James

Re: AIC7xxx on 2.6.18

[Wakko Warner]

Keep me in CC, I'm not on the list.

James Bottomley wrote:
> On Fri, 2007-02-02 at 19:42 -0500, Wakko Warner wrote:
> > [   40.154122] ACPI: PCI Interrupt 0000:05:01.1[B] -> GSI 17 (level,
> > low) -> IRQ 22
> > [   40.158190] scsi4: PCI error Interrupt at seqaddr = 0x1bb
> > [   40.158261] scsi4: Signaled a Target Abort
> 
> Well, this is the source of the problem.  It means the driver detected
> an error in the PCI system.  I'm afraid I don't know what a PCI target
> error is, but I think it means something is wrong with the PCI bus in
> your system.  There's also a screaming interrupt, because the first 500
> interrupts will be ignored before it looks at the bus error register.

What I don't understand is that it works fine if I load the module first
then and exec init.  If the ID is 05:01.1, this is the 2nd channel provided
by the aha-2940u/uw card.  There's nothing attached to that channel.

-- 
 Lab tests show that use of micro$oft causes cancer in lab animals
 Got Gas???