qla2xxx errors? (2.6.19)

linux-scsi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

* qla2xxx errors? (2.6.19)
@ 2007-06-10 10:00 Csillag Tamas
  2007-06-12 17:48 ` Andrew Vasquez
  0 siblings, 1 reply; 8+ messages in thread
From: Csillag Tamas @ 2007-06-10 10:00 UTC (permalink / raw)
  To: linux-scsi

Hi,

The university I work at has 4 Blade HS20 servers connected to a IBM
DS400 storage via Fibre Channel.
The fibre channel module is:

06:01.0 Fibre Channel: QLogic Corp. QLA2312 Fibre Channel Adapter (rev 02)
06:01.1 Fibre Channel: QLogic Corp. QLA2312 Fibre Channel Adapter (rev 02)

# lsmod
Module                  Size  Used by
...
qla2xxx               143584  1

# l /lib/firmware 
total 244
lrwxrwxrwx 1 root root     21 2007-05-05 22:02 ql2300_fw.bin -> ql2300_fw.bin.3.03.18

With recent kernels filesystem corruption occurs under high disk I/O.
I have just tried 2.6.19 and I got the same, but kernel 2.6.18 and
before looks safe.

The test I use is the following:
I first checkout the kernel's git tree:
# git-clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git linux-2.6.git
Then
# for i in {100..400}; do; rsync -a linux-2.6.git/ c2_$i& done
.... waiting for finish
# for i in {100..400}; do; rsync -a linux-2.6.git/ c3_$i& done
.... waiting for finish
# for i in {100..400}; do; rsync -a linux-2.6.git/ c4_$i& done

Some error messages:
ReiserFS: warning: is_tree_node: node level 32010 does not match to the expected one 1
ReiserFS: sdb1: warning: vs-5150: search_by_key: invalid format found in block 8093723. Fsck?
ReiserFS: sdb1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occurred trying to find stat data of [961831 1064427 0x0 SD]

I am able to reproduce this errors.

With other filesystems I get similar errors.

I suspect a bug in qla2xxx, but I am not sure.
Can you help me how to track down this problem?

Thanks in advance.

PS: please cc to me.
-- 
CSILLAG Tamas (cstamas) - http://digitus.itk.ppke.hu/~cstamas

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: qla2xxx errors? (2.6.19)
  2007-06-10 10:00 qla2xxx errors? (2.6.19) Csillag Tamas
@ 2007-06-12 17:48 ` Andrew Vasquez
  2007-06-12 19:15   ` Csillag Tamas
                     ` (2 more replies)
  0 siblings, 3 replies; 8+ messages in thread
From: Andrew Vasquez @ 2007-06-12 17:48 UTC (permalink / raw)
  To: Csillag Tamas; +Cc: linux-scsi

On Sun, 10 Jun 2007, Csillag Tamas wrote:

> The university I work at has 4 Blade HS20 servers connected to a IBM
> DS400 storage via Fibre Channel.
> The fibre channel module is:
> 
> 06:01.0 Fibre Channel: QLogic Corp. QLA2312 Fibre Channel Adapter (rev 02)
> 06:01.1 Fibre Channel: QLogic Corp. QLA2312 Fibre Channel Adapter (rev 02)
> 
> # lsmod
> Module                  Size  Used by
> ...
> qla2xxx               143584  1
> 
> # l /lib/firmware 
> total 244
> lrwxrwxrwx 1 root root     21 2007-05-05 22:02 ql2300_fw.bin -> ql2300_fw.bin.3.03.18
> 
> With recent kernels filesystem corruption occurs under high disk I/O.
> I have just tried 2.6.19 and I got the same, but kernel 2.6.18 and
> before looks safe.

Could you load the driver with the ql2xextended_error_logging module
parameter enabled:

	$ echo "6 4 1 7"  > /proc/sys/kernel/printk
	$ insmod qla2xxx.ko ql2xextended_error_logging=1

and forward over the resultant messages file beginning with the load
of the driver to the point at which the File-system failure occurs.

> The test I use is the following:
> I first checkout the kernel's git tree:
> # git-clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git linux-2.6.git
> Then
> # for i in {100..400}; do; rsync -a linux-2.6.git/ c2_$i& done
> .... waiting for finish
> # for i in {100..400}; do; rsync -a linux-2.6.git/ c3_$i& done
> .... waiting for finish
> # for i in {100..400}; do; rsync -a linux-2.6.git/ c4_$i& done
> 
> Some error messages:
> ReiserFS: warning: is_tree_node: node level 32010 does not match to the expected one 1
> ReiserFS: sdb1: warning: vs-5150: search_by_key: invalid format found in block 8093723. Fsck?
> ReiserFS: sdb1: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occurred trying to find stat data of [961831 1064427 0x0 SD]

I can setup somthing similar locally, I take it you are writing
directly some some lun exported off the DS400, and not using DM?

> I am able to reproduce this errors.
> 
> With other filesystems I get similar errors.

Just curious, what are those errors?

> I suspect a bug in qla2xxx, but I am not sure.
> Can you help me how to track down this problem?

Please also provide the output of:

	$ cat /proc/scsi/scsi
	$ lspci -vvx

and your .config file.

Regards,
Andrew Vasquez

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: qla2xxx errors? (2.6.19)
  2007-06-12 17:48 ` Andrew Vasquez
@ 2007-06-12 19:15   ` Csillag Tamas
  2007-06-13 20:23   ` Csillag Tamas
  2007-06-21 21:41   ` Csillag Tamas
  2 siblings, 0 replies; 8+ messages in thread
From: Csillag Tamas @ 2007-06-12 19:15 UTC (permalink / raw)
  To: Andrew Vasquez; +Cc: linux-scsi

[-- Attachment #1: Type: text/plain, Size: 2920 bytes --]

On 06/12, Andrew Vasquez wrote:
> On Sun, 10 Jun 2007, Csillag Tamas wrote:
> 
> > The university I work at has 4 Blade HS20 servers connected to a IBM
> > DS400 storage via Fibre Channel.
> > The fibre channel module is:
> > 
> > 06:01.0 Fibre Channel: QLogic Corp. QLA2312 Fibre Channel Adapter (rev 02)
> > 06:01.1 Fibre Channel: QLogic Corp. QLA2312 Fibre Channel Adapter (rev 02)
> > 
> > # lsmod
> > Module                  Size  Used by
> > ...
> > qla2xxx               143584  1
> > 
> > # l /lib/firmware 
> > total 244
> > lrwxrwxrwx 1 root root     21 2007-05-05 22:02 ql2300_fw.bin -> ql2300_fw.bin.3.03.18
> > 
> > With recent kernels filesystem corruption occurs under high disk I/O.
> > I have just tried 2.6.19 and I got the same, but kernel 2.6.18 and
> > before looks safe.
> 
> Could you load the driver with the ql2xextended_error_logging module
> parameter enabled:
> 
> 	$ echo "6 4 1 7"  > /proc/sys/kernel/printk
> 	$ insmod qla2xxx.ko ql2xextended_error_logging=1
> 
> and forward over the resultant messages file beginning with the load
> of the driver to the point at which the File-system failure occurs.

I will. I already started the test according to your instuctions with
2.6.22-rc4
It will take a while.

> I can setup somthing similar locally, I take it you are writing
> directly some some lun exported off the DS400, and not using DM?

Yes.

> > I am able to reproduce this errors.
> > 
> > With other filesystems I get similar errors.
> 
> Just curious, what are those errors?

I made a test with ext2 too:
EXT2-fs error (device sdb1): ext2_free_blocks: bit already cleared for block 54253574

It is similar with reiserfs:
ReiserFS: sdb1: warning: vs-4080: reiserfs_free_block: free_block (sdb1:48975407)[dev:blocknr]: bit already cleared
 
> > I suspect a bug in qla2xxx, but I am not sure.
> > Can you help me how to track down this problem?
> 
> Please also provide the output of:
> 
> 	$ cat /proc/scsi/scsi
> 	$ lspci -vvx
>
> and your .config file.

# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: IBM-ESXS Model: ST973401LC    FN Rev: B41D
  Type:   Direct-Access                    ANSI  SCSI revision: 04
Host: scsi3 Channel: 00 Id: 00 Lun: 00
  Vendor: IBM      Model: DS400    S320    Rev: 7.01
  Type:   Direct-Access                    ANSI  SCSI revision: 04
Host: scsi3 Channel: 00 Id: 00 Lun: 01
  Vendor: IBM      Model: DS400    S320    Rev: 7.01
  Type:   Direct-Access                    ANSI  SCSI revision: 04
Host: scsi3 Channel: 00 Id: 00 Lun: 05
  Vendor: IBM      Model: DS400    S320    Rev: 7.01
  Type:   Direct-Access                    ANSI  SCSI revision: 04

I attach the output of the last command and my .config.

Thanks.
-- 
CSILLAG Tamas (cstamas) - http://digitus.itk.ppke.hu/~cstamas

"Work hard and do your best, it'll make it easier for the rest"                                     
   -- Garfield


[-- Attachment #2: lspci_vvx --]
[-- Type: text/plain, Size: 21544 bytes --]

00:00.0 Host bridge: Intel Corporation E7520 Memory Controller Hub (rev 0c)
	Subsystem: IBM Unknown device 02dd
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Region 1: Memory at <ignored> (32-bit, non-prefetchable)
	Capabilities: [40] Vendor Specific Information
00: 86 80 90 35 46 01 90 00 0c 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 ff 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 dd 02
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00

00:00.1 Class ff00: Intel Corporation E7525/E7520 Error Reporting Registers (rev 0c)
	Subsystem: IBM Unknown device 02dd
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00: 86 80 91 35 00 01 00 00 0c 00 00 ff 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 dd 02
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:03.0 PCI bridge: Intel Corporation E7525/E7520/E7320 PCI Express Port A1 (rev 0c) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=04, subordinate=06, sec-latency=0
	I/O behind bridge: 00005000-0000ffff
	Memory behind bridge: d9000000-dcffffff
	Prefetchable memory behind bridge: 0000000088000000-00000000880fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable-
		Address: fee00000  Data: 0000
	Capabilities: [64] Express Root Port (Slot-) IRQ 0
		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
		Device: Latency L0s <64ns, L1 <1us
		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
		Device: MaxPayload 256 bytes, MaxReadReq 128 bytes
		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 3
		Link: Latency L0s <4us, L1 unlimited
		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
		Link: Speed 2.5Gb/s, Width x4
		Root: Correctable+ Non-Fatal+ Fatal+ PME+
	Capabilities: [100] Advanced Error Reporting
00: 86 80 96 35 47 01 10 00 0c 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 04 06 00 50 f0 00 00
20: 00 d9 f0 dc 01 88 01 88 00 00 00 00 00 00 00 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 00 01 03 00

00:08.0 System peripheral: Intel Corporation E7525/E7520/E7320 Extended Configuration Registers (rev 0c)
	Subsystem: IBM Unknown device 02dd
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00: 86 80 9b 35 00 00 80 00 0c 00 80 08 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 dd 02
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:1c.0 PCI bridge: Intel Corporation 6300ESB 64-bit PCI-X Bridge (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
	I/O behind bridge: 00004000-00004fff
	Memory behind bridge: dd000000-deffffff
	Prefetchable memory behind bridge: 0000000088100000-00000000881fffff
	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: [50] PCI-X bridge device
		Secondary Status: 64bit+ 133MHz- SCD- USC- SCO- SRD- Freq=66MHz
		Status: Dev=00:1c.0 64bit+ 133MHz- SCD- USC- SCO- SRD-
		Upstream: Capacity=65535 CommitmentLimit=0
		Downstream: Capacity=65535 CommitmentLimit=0
00: 86 80 ae 25 47 01 30 00 02 00 04 06 10 40 01 00
10: 00 00 00 00 00 00 00 00 00 02 02 40 40 40 a0 02
20: 00 dd f0 de 11 88 11 88 00 00 00 00 00 00 00 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 00 00 03 00

00:1d.0 USB Controller: Intel Corporation 6300ESB USB Universal Host Controller (rev 02) (prog-if 00 [UHCI])
	Subsystem: IBM Unknown device 02dd
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 4: I/O ports at 2200 [size=32]
00: 86 80 a9 25 05 00 80 02 02 00 03 0c 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 22 00 00 00 00 00 00 00 00 00 00 14 10 dd 02
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00

00:1d.1 USB Controller: Intel Corporation 6300ESB USB Universal Host Controller (rev 02) (prog-if 00 [UHCI])
	Subsystem: IBM Unknown device 02dd
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin B routed to IRQ 20
	Region 4: I/O ports at 2600 [size=32]
00: 86 80 aa 25 05 00 80 02 02 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 26 00 00 00 00 00 00 00 00 00 00 14 10 dd 02
30: 00 00 00 00 00 00 00 00 00 00 00 00 05 02 00 00

00:1d.4 System peripheral: Intel Corporation 6300ESB Watchdog Timer (rev 02)
	Subsystem: IBM Unknown device 02dd
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Region 0: Memory at 88200400 (32-bit, non-prefetchable) [disabled] [size=16]
00: 86 80 ab 25 00 00 80 02 02 00 80 08 00 00 00 00
10: 00 04 20 88 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 dd 02
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:1d.5 PIC: Intel Corporation 6300ESB I/O Advanced Programmable Interrupt Controller (rev 02) (prog-if 20 [IO(X)-APIC])
	Subsystem: IBM Unknown device 02dd
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Capabilities: [50] PCI-X non-bridge device
		Command: DPERE- ERO- RBC=512 OST=1
		Status: Dev=00:1d.5 64bit+ 133MHz- SCD- USC- DC=simple DMMRBC=512 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz-
00: 86 80 ac 25 46 01 10 00 02 20 00 08 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 dd 02
30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 00 00

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 0a) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: f8000000-f8ffffff
	Prefetchable memory behind bridge: f0000000-f7ffffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
00: 86 80 4e 24 47 01 80 00 0a 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 20 30 30 80 02
20: 00 f8 f0 f8 00 f0 f0 f7 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0b 00

00:1f.0 ISA bridge: Intel Corporation 6300ESB LPC Interface Controller (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
00: 86 80 a1 25 4f 01 80 02 02 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:1f.1 IDE interface: Intel Corporation 6300ESB PATA Storage Controller (rev 02) (prog-if 8a [Master SecP PriP])
	Subsystem: IBM Unknown device 02dd
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 14
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at 1000 [size=16]
	Region 5: Memory at 88200000 (32-bit, non-prefetchable) [size=1K]
00: 86 80 a2 25 07 00 88 02 02 8a 01 01 00 00 00 00
10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
20: 01 10 00 00 00 00 20 88 00 00 00 00 14 10 dd 02
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00

00:1f.3 SMBus: Intel Corporation 6300ESB SMBus Controller (rev 02)
	Subsystem: IBM Unknown device 02dd
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin B routed to IRQ 22
	Region 4: I/O ports at 0440 [size=32]
00: 86 80 a4 25 01 04 80 02 02 00 05 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 41 04 00 00 00 00 00 00 00 00 00 00 14 10 dd 02
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 00

01:01.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] (prog-if 00 [VGA])
	Subsystem: IBM IBM eServer xSeries server mainboard
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (2000ns min), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
	Region 1: I/O ports at 3000 [size=256]
	Region 2: Memory at f8000000 (32-bit, non-prefetchable) [size=64K]
	[virtual] Expansion ROM at f8020000 [disabled] [size=128K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 02 10 59 51 87 01 90 02 00 00 00 03 10 40 00 00
10: 08 00 00 f0 01 30 00 00 00 00 00 f8 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 c8 02
30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 08 00

02:01.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 08)
	Subsystem: IBM Unknown device 026d
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 72 (4250ns min, 4500ns max), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 19
	Region 0: I/O ports at 4000 [size=256]
	Region 1: Memory at deff0000 (64-bit, non-prefetchable) [size=64K]
	Region 3: Memory at defe0000 (64-bit, non-prefetchable) [size=64K]
	[virtual] Expansion ROM at 88100000 [disabled] [size=1M]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
		Address: 0000000000000000  Data: 0000
	Capabilities: [68] PCI-X non-bridge device
		Command: DPERE- ERO- RBC=512 OST=8
		Status: Dev=02:01.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=8 DMCRS=16 RSCEM- 266MHz- 533MHz-
00: 00 10 30 00 57 01 30 02 08 00 00 01 10 48 00 00
10: 01 40 00 00 04 00 ff de 00 00 00 00 04 00 fe de
20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 6d 02
30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 11 12

04:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A (rev 09) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=04, secondary=06, subordinate=06, sec-latency=64
	I/O behind bridge: 00005000-0000ffff
	Memory behind bridge: d9000000-daffffff
	Prefetchable memory behind bridge: 0000000088000000-00000000880fffff
	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
		Device: Latency L0s <64ns, L1 <1us
		Device: AtnBtn- AtnInd- PwrInd-
		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
		Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
		Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
		Link: Latency L0s unlimited, L1 unlimited
		Link: ASPM Disabled CommClk- ExtSynch-
		Link: Speed 2.5Gb/s, Width x4
	Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
		Address: 0000000000000000  Data: 0000
	Capabilities: [6c] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [d8] PCI-X bridge device
		Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
		Status: Dev=04:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
		Upstream: Capacity=65535 CommitmentLimit=65535
		Downstream: Capacity=65535 CommitmentLimit=65535
	Capabilities: [100] Advanced Error Reporting
	Capabilities: [300] Power Budgeting
00: 86 80 29 03 47 01 10 00 09 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 04 06 06 40 50 f0 a0 02
20: 00 d9 f0 da 01 88 01 88 00 00 00 00 00 00 00 00
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 00

04:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B (rev 09) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=04, secondary=05, subordinate=05, sec-latency=64
	Memory behind bridge: db000000-dcffffff
	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
		Device: Latency L0s <64ns, L1 <1us
		Device: AtnBtn- AtnInd- PwrInd-
		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
		Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
		Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
		Link: Latency L0s unlimited, L1 unlimited
		Link: ASPM Disabled CommClk- ExtSynch-
		Link: Speed 2.5Gb/s, Width x4
	Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
		Address: 0000000000000000  Data: 0000
	Capabilities: [6c] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [d8] PCI-X bridge device
		Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
		Status: Dev=04:00.2 64bit- 133MHz- SCD- USC- SCO- SRD-
		Upstream: Capacity=65535 CommitmentLimit=65535
		Downstream: Capacity=65535 CommitmentLimit=65535
	Capabilities: [100] Advanced Error Reporting
	Capabilities: [300] Power Budgeting
00: 86 80 2a 03 47 01 10 00 09 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 04 05 05 40 f0 00 a0 22
20: 00 db f0 dc f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 00

05:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704S Gigabit Ethernet (rev 10)
	Subsystem: IBM Unknown device 02e8
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (16000ns min), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at dcff0000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: [40] PCI-X non-bridge device
		Command: DPERE- ERO- RBC=2048 OST=1
		Status: Dev=05:01.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
	Capabilities: [48] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable+ DSel=0 DScale=1 PME-
	Capabilities: [50] Vital Product Data
	Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable-
		Address: bf97d726f6ff2e78  Data: 8eff
00: e4 14 a8 16 46 01 b0 02 10 00 00 02 10 40 80 00
10: 04 00 ff dc 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 e8 02
30: 00 00 00 00 40 00 00 00 00 00 00 00 07 01 40 00

05:01.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704S Gigabit Ethernet (rev 10)
	Subsystem: IBM Unknown device 02e8
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (16000ns min), Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 18
	Region 0: Memory at dcfe0000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: [40] PCI-X non-bridge device
		Command: DPERE- ERO- RBC=2048 OST=1
		Status: Dev=05:01.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
	Capabilities: [48] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable+ DSel=0 DScale=1 PME-
	Capabilities: [50] Vital Product Data
	Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable-
		Address: 7efbf71e77bfeffc  Data: f7fe
00: e4 14 a8 16 46 01 b0 02 10 00 00 02 10 40 80 00
10: 04 00 fe dc 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 e8 02
30: 00 00 00 00 40 00 00 00 00 00 00 00 05 02 40 00

06:01.0 Fibre Channel: QLogic Corp. QLA2312 Fibre Channel Adapter (rev 02)
	Subsystem: IBM Unknown device 02fb
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 128 (16000ns min), Cache Line Size: 128 bytes
	Interrupt: pin A routed to IRQ 21
	Region 0: I/O ports at 5000 [size=256]
	Region 1: Memory at dafff000 (64-bit, non-prefetchable) [size=4K]
	[virtual] Expansion ROM at 88000000 [disabled] [size=128K]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [4c] PCI-X non-bridge device
		Command: DPERE- ERO+ RBC=512 OST=3
		Status: Dev=06:01.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=4096 DMOST=3 DMCRS=32 RSCEM- 266MHz- 533MHz-
	Capabilities: [54] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable-
		Address: 0000000000000000  Data: 0000
	Capabilities: [64] #06 [0080]
00: 77 10 12 23 57 01 30 02 02 00 04 0c 20 80 80 00
10: 01 50 00 00 04 f0 ff da 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 fb 02
30: 00 00 00 00 44 00 00 00 00 00 00 00 07 01 40 00

06:01.1 Fibre Channel: QLogic Corp. QLA2312 Fibre Channel Adapter (rev 02)
	Subsystem: IBM Unknown device 02fb
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 128 (16000ns min), Cache Line Size: 128 bytes
	Interrupt: pin B routed to IRQ 23
	Region 0: I/O ports at 5100 [size=256]
	Region 1: Memory at daffe000 (64-bit, non-prefetchable) [size=4K]
	[virtual] Expansion ROM at 88020000 [disabled] [size=128K]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [4c] PCI-X non-bridge device
		Command: DPERE- ERO+ RBC=512 OST=3
		Status: Dev=06:01.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=4096 DMOST=3 DMCRS=32 RSCEM- 266MHz- 533MHz-
	Capabilities: [54] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable-
		Address: 0000000000000000  Data: 0000
	Capabilities: [64] #06 [0080]
00: 77 10 12 23 57 01 30 02 02 00 04 0c 20 80 80 00
10: 01 51 00 00 04 e0 ff da 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 fb 02
30: 00 00 00 00 44 00 00 00 00 00 00 00 05 02 40 00


[-- Attachment #3: config --]
[-- Type: text/plain, Size: 40330 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.22-rc4
# Tue Jun 12 20:06:08 2007
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_QUICKLIST=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_CPUSETS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y

#
# Block layer
#
CONFIG_BLOCK=y
CONFIG_LBD=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_LSF=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_PARAVIRT is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MCORE2 is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_MODEL=4
# CONFIG_HPET_TIMER is not set
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
# CONFIG_SCHED_MC is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_PREEMPT_BKL is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_MCE is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
CONFIG_DCDBAS=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_NR_QUICK=1
CONFIG_HIGHPTE=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_IRQBALANCE=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x100000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x100000
# CONFIG_HOTPLUG_CPU is not set
# CONFIG_COMPAT_VDSO is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_AC=y
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
CONFIG_APM_DO_ENABLE=y
# CONFIG_APM_CPU_IDLE is not set
CONFIG_APM_DISPLAY_BLANK=y
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_DEFAULT_BIC is not set
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
CONFIG_DEFAULT_RENO=y
CONFIG_DEFAULT_TCP_CONG="reno"
CONFIG_TCP_MD5SIG=y
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK_ENABLED=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
CONFIG_VLAN_8021Q=y
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=m

#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set

#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_PNPACPI=y

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=m

#
# Misc devices
#
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_BLINK is not set
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=y
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_SCSI_SAS_LIBSAS is not set

#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA_FC=m
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_ATA is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
# CONFIG_DM_MULTIPATH is not set
CONFIG_DM_DELAY=m

#
# Fusion MPT device support
#
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=y
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=y

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
# CONFIG_I2O_EXT_ADAPTEC is not set
CONFIG_I2O_CONFIG=m
# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
# CONFIG_I2O_BUS is not set
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not set

#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=y
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_POLLDEV is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
CONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
CONFIG_ITCO_WDT=m
# CONFIG_ITCO_VENDOR_SUPPORT is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_GEODE is not set
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_ISA=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
# CONFIG_I2C_SIMTEC is not set
CONFIG_SCx200_ACB=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_STUB=m
# CONFIG_I2C_TINY_USB is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m

#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
# CONFIG_SENSORS_PCA9539 is not set
CONFIG_SENSORS_PCF8591=m
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_FSCHER=m
# CONFIG_SENSORS_FSCPOS is not set
CONFIG_SENSORS_GL518SM=m
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
# CONFIG_SENSORS_LM92 is not set
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
# CONFIG_SENSORS_W83792D is not set
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
CONFIG_SENSORS_APPLESMC=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set

#
# Graphics support
#
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
CONFIG_VGASTATE=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=y
CONFIG_FB_VESA=y
# CONFIG_FB_HECUBA is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
CONFIG_FONT_10x18=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
# CONFIG_SOUND is not set

#
# HID Devices
#
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set

#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set

#
# LED devices
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m

#
# LED drivers
#

#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
# CONFIG_EDAC is not set

#
# Real Time Clock
#
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#

#
# DMA Engine support
#
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
CONFIG_NET_DMA=y

#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=m

#
# Auxiliary Display support
#
# CONFIG_KS0108 is not set

#
# Virtualization
#
# CONFIG_KVM is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
# CONFIG_REISERFS_FS_SECURITY is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_SECURITY is not set
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=852
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-2"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m

#
# Distributed Lock Manager
#
# CONFIG_DLM is not set

#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_4KSTACKS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ABLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_TEST=m

#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
CONFIG_CRYPTO_DEV_GEODE=m

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: qla2xxx errors? (2.6.19)
  2007-06-12 17:48 ` Andrew Vasquez
  2007-06-12 19:15   ` Csillag Tamas
@ 2007-06-13 20:23   ` Csillag Tamas
  2007-06-21 21:41   ` Csillag Tamas
  2 siblings, 0 replies; 8+ messages in thread
From: Csillag Tamas @ 2007-06-13 20:23 UTC (permalink / raw)
  To: Andrew Vasquez; +Cc: linux-scsi

[-- Attachment #1: Type: text/plain, Size: 518 bytes --]

On 06/12, Andrew Vasquez wrote:
> Could you load the driver with the ql2xextended_error_logging module
> parameter enabled:
> 
> 	$ echo "6 4 1 7"  > /proc/sys/kernel/printk
> 	$ insmod qla2xxx.ko ql2xextended_error_logging=1
> 
> and forward over the resultant messages file beginning with the load
> of the driver to the point at which the File-system failure occurs.

Ok, here we go...

Thanks.
-- 
CSILLAG Tamas (cstamas) - http://digitus.itk.ppke.hu/~cstamas

"Not all those who wander are lost."  - JRR Tolkien


[-- Attachment #2: current --]
[-- Type: text/plain, Size: 10771 bytes --]

2007-06-13_00:10:34.36780 kern.info: ACPI: PCI interrupt for device 0000:06:01.1 disabled
2007-06-13_00:10:34.38819 kern.info: ACPI: PCI interrupt for device 0000:06:01.0 disabled
2007-06-13_00:10:37.77002 kern.info: QLogic Fibre Channel HBA Driver
2007-06-13_00:10:37.77014 kern.info: ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 49 (level, low) -> IRQ 21
2007-06-13_00:10:37.77015 kern.info: qla2xxx 0000:06:01.0: Found an ISP2312, irq 21, iobase 0xf885c000
2007-06-13_00:10:37.77023 kern.info: qla2xxx 0000:06:01.0: Configuring PCI space...
2007-06-13_00:10:37.77041 kern.info: qla2xxx 0000:06:01.0: Configure NVRAM parameters...
2007-06-13_00:10:37.85574 kern.info: qla2xxx 0000:06:01.0: Verifying loaded RISC code...
2007-06-13_00:10:37.85576 kern.warn: scsi(5): **** Load RISC code ****
2007-06-13_00:10:37.95150 kern.warn: scsi(5): Verifying Checksum of loaded RISC code.
2007-06-13_00:10:37.97443 kern.warn: scsi(5): Checksum OK, start firmware.
2007-06-13_00:10:38.01821 kern.info: qla2xxx 0000:06:01.0: Extended memory detected (512 KB)...
2007-06-13_00:10:38.01822 kern.info: qla2xxx 0000:06:01.0: Resizing request queue depth (2048 -> 4096)...
2007-06-13_00:10:38.01829 kern.info: qla2xxx 0000:06:01.0: Allocated (1308 KB) for firmware dump...
2007-06-13_00:10:38.05235 kern.warn: scsi(5): Issue init firmware.
2007-06-13_00:10:38.07547 kern.warn: DEBUG: detect hba 5 at address = e23262f8
2007-06-13_00:10:38.07549 kern.info: scsi5 : qla2xxx
2007-06-13_00:10:40.07542 kern.warn: scsi(5): qla2x00_loop_resync()
2007-06-13_00:10:41.66893 kern.warn: scsi(5): Asynchronous P2P MODE received.
2007-06-13_00:10:41.66896 kern.warn: scsi(5): Asynchronous LOOP UP (2 Gbps).
2007-06-13_00:10:41.66897 kern.info: qla2xxx 0000:06:01.0: LOOP UP detected (2 Gbps).
2007-06-13_00:10:41.67430 kern.warn: scsi(5): Asynchronous PORT UPDATE.
2007-06-13_00:10:41.67435 kern.info: scsi(5): Port database changed ffff 0006 0000.
2007-06-13_00:10:41.80908 kern.warn: scsi(5): Asynchronous PORT UPDATE ignored 0000/0006/0000.
2007-06-13_00:10:41.80909 kern.warn: scsi(5): Asynchronous PORT UPDATE ignored 0000/0007/0000.
2007-06-13_00:10:41.82060 kern.warn: scsi(5): Asynchronous PORT UPDATE ignored 0000/0004/0000.
2007-06-13_00:10:42.14759 kern.warn: scsi(5): F/W Ready - OK 
2007-06-13_00:10:42.15900 kern.warn: scsi(5): fw_state=3 curr time=13a9568.
2007-06-13_00:10:42.17041 kern.warn: scsi(5): Configure loop -- dpc flags =0x40800e1
2007-06-13_00:10:42.18179 kern.warn: scsi(5): RSCN queue entry[0] = [00/000000].
2007-06-13_00:10:42.19295 kern.warn: scsi(5): device_resync: rscn overflow.
2007-06-13_00:10:42.20485 kern.warn: scsi(5): RFT_ID exiting normally.
2007-06-13_00:10:42.21633 kern.warn: scsi(5): RFF_ID exiting normally.
2007-06-13_00:10:42.22760 kern.warn: scsi(5): RNN_ID exiting normally.
2007-06-13_00:10:42.23881 kern.warn: scsi(5): RSNN_NN exiting normally.
2007-06-13_00:10:42.25540 kern.warn: scsi(5): GID_PT entry - nn 200000112593fc1c pn 210000112593fc1c portid=010100.
2007-06-13_00:10:42.26671 kern.warn: scsi(5): GID_PT entry - nn 200000112593f89c pn 210000112593f89c portid=010200.
2007-06-13_00:10:42.27796 kern.warn: scsi(5): GID_PT entry - nn 200000145e241c2c pn 210000145e241c2c portid=010300.
2007-06-13_00:10:42.28885 kern.warn: scsi(5): GID_PT entry - nn 200000145e241dd2 pn 210000145e241dd2 portid=010400.
2007-06-13_00:10:42.29975 kern.warn: scsi(5): GID_PT entry - nn 20000000d12672a5 pn 21000000d12672a5 portid=011100.
2007-06-13_00:10:42.29976 kern.warn: scsi(5): device wrap (011100)
2007-06-13_00:10:42.31919 kern.warn: scsi(5): Trying Fabric Login w/loop id 0x0081 for port 010100.
2007-06-13_00:10:42.32992 kern.warn: scsi(5): Trying Fabric Login w/loop id 0x0082 for port 010200.
2007-06-13_00:10:42.34015 kern.warn: scsi(5): Trying Fabric Login w/loop id 0x0083 for port 010300.
2007-06-13_00:10:42.35005 kern.warn: scsi(5): Trying Fabric Login w/loop id 0x0084 for port 011100.
2007-06-13_00:10:42.39558 kern.warn: scsi(5): LOOP READY
2007-06-13_00:10:42.39560 kern.info: qla2xxx 0000:06:01.0: 
2007-06-13_00:10:42.39561 kern.warn:  QLogic Fibre Channel HBA Driver: 8.01.07-k7-debug
2007-06-13_00:10:42.39562 kern.warn:   QLogic IBM FCEC - 
2007-06-13_00:10:42.39563 kern.warn:   ISP2312: PCI-X (133 MHz) @ 0000:06:01.0 hdma-, host#=5, fw=3.03.18 IPX
2007-06-13_00:10:42.39563 kern.info: ACPI: PCI Interrupt 0000:06:01.1[B] -> GSI 50 (level, low) -> IRQ 23
2007-06-13_00:10:42.39564 kern.info: qla2xxx 0000:06:01.1: Found an ISP2312, irq 23, iobase 0xf8c3e000
2007-06-13_00:10:42.39565 kern.info: qla2xxx 0000:06:01.1: Configuring PCI space...
2007-06-13_00:10:42.39566 kern.warn: scsi(6): No matching ROM signature.
2007-06-13_00:10:42.39567 kern.info: qla2xxx 0000:06:01.1: Configure NVRAM parameters...
2007-06-13_00:10:42.39568 kern.info: qla2xxx 0000:06:01.0: scsi(5:0:0:0): Queue depth adjusted-up to 4.
2007-06-13_00:10:42.39569 kern.warn: scsi(5): qla2x00_loop_resync - end
2007-06-13_00:10:42.41359 kern.notice: scsi 5:0:0:0: Direct-Access     IBM      DS400    S320    7.01 PQ: 1 ANSI: 4
2007-06-13_00:10:42.42267 kern.notice: scsi 5:0:0:0: Attached scsi generic sg1 type 0
2007-06-13_00:10:42.43283 kern.notice: scsi 5:0:0:1: Direct-Access     IBM      DS400    S320    7.01 PQ: 0 ANSI: 4
2007-06-13_00:10:42.45124 kern.notice: sd 5:0:0:1: [sdb] 1171701760 512-byte hardware sectors (599911 MB)
2007-06-13_00:10:42.45126 kern.info: qla2xxx 0000:06:01.1: Verifying loaded RISC code...
2007-06-13_00:10:42.45128 kern.warn: scsi(6): **** Load RISC code ****
2007-06-13_00:10:42.46028 kern.notice: sd 5:0:0:1: [sdb] Write Protect is off
2007-06-13_00:10:42.46030 kern.debug: sd 5:0:0:1: [sdb] Mode Sense: 8f 00 00 08
2007-06-13_00:10:42.46940 kern.notice: sd 5:0:0:1: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
2007-06-13_00:10:42.49598 kern.notice: sd 5:0:0:1: [sdb] 1171701760 512-byte hardware sectors (599911 MB)
2007-06-13_00:10:42.49600 kern.warn: scsi(6): Verifying Checksum of loaded RISC code.
2007-06-13_00:10:42.49604 kern.warn: scsi(6): Checksum OK, start firmware.
2007-06-13_00:10:42.50477 kern.notice: sd 5:0:0:1: [sdb] Write Protect is off
2007-06-13_00:10:42.50478 kern.debug: sd 5:0:0:1: [sdb] Mode Sense: 8f 00 00 08
2007-06-13_00:10:42.51429 kern.notice: sd 5:0:0:1: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
2007-06-13_00:10:42.51430 kern.info:  sdb:<6>qla2xxx 0000:06:01.1: Extended memory detected (512 KB)...
2007-06-13_00:10:42.52526 kern.info: qla2xxx 0000:06:01.1: Resizing request queue depth (2048 -> 4096)...
2007-06-13_00:10:42.52533 kern.info: qla2xxx 0000:06:01.1: Allocated (1308 KB) for firmware dump...
2007-06-13_00:10:42.52784 kern.warn:  sdb1
2007-06-13_00:10:42.54505 kern.notice: sd 5:0:0:1: [sdb] Attached SCSI disk
2007-06-13_00:10:42.56227 kern.notice: sd 5:0:0:1: Attached scsi generic sg2 type 0
2007-06-13_00:10:42.56228 kern.warn: scsi(6): Issue init firmware.
2007-06-13_00:10:42.57189 kern.notice: scsi 5:0:0:5: Direct-Access     IBM      DS400    S320    7.01 PQ: 0 ANSI: 4
2007-06-13_00:10:42.58189 kern.notice: sd 5:0:0:5: [sdc] 209715200 512-byte hardware sectors (107374 MB)
2007-06-13_00:10:42.59133 kern.notice: sd 5:0:0:5: [sdc] Write Protect is off
2007-06-13_00:10:42.59137 kern.debug: sd 5:0:0:5: [sdc] Mode Sense: 8f 00 00 08
2007-06-13_00:10:42.60164 kern.notice: sd 5:0:0:5: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
2007-06-13_00:10:42.61177 kern.notice: sd 5:0:0:5: [sdc] 209715200 512-byte hardware sectors (107374 MB)
2007-06-13_00:10:42.62176 kern.notice: sd 5:0:0:5: [sdc] Write Protect is off
2007-06-13_00:10:42.62178 kern.debug: sd 5:0:0:5: [sdc] Mode Sense: 8f 00 00 08
2007-06-13_00:10:42.63258 kern.notice: sd 5:0:0:5: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
2007-06-13_00:10:42.63259 kern.info:  sdc: sdc1
2007-06-13_00:10:42.65416 kern.notice: sd 5:0:0:5: [sdc] Attached SCSI disk
2007-06-13_00:10:42.65417 kern.notice: sd 5:0:0:5: Attached scsi generic sg3 type 0
2007-06-13_00:10:42.66967 kern.warn: DEBUG: detect hba 6 at address = e8d042f8
2007-06-13_00:10:42.66969 kern.info: scsi6 : qla2xxx
2007-06-13_00:10:43.07302 kern.warn: scsi(5): qla2x00_reset_marker()
2007-06-13_00:10:44.66695 kern.warn: scsi(6): qla2x00_loop_resync()
2007-06-13_00:10:47.69365 kern.info: qla2xxx 0000:06:01.1: 
2007-06-13_00:10:47.69368 kern.warn:  QLogic Fibre Channel HBA Driver: 8.01.07-k7-debug
2007-06-13_00:10:47.69369 kern.warn:   QLogic IBM FCEC - 
2007-06-13_00:10:47.69370 kern.warn:   ISP2312: PCI-X (133 MHz) @ 0000:06:01.1 hdma-, host#=6, fw=3.03.18 IPX
2007-06-13_00:11:04.72814 kern.info: qla2xxx 0000:06:01.1: Cable is unplugged...
2007-06-13_00:11:04.72817 kern.warn: scsi(6): fw_state=4 curr time=13aed9d.
2007-06-13_00:11:04.74938 kern.warn: scsi(6): Firmware ready **** FAILED ****.
2007-06-13_00:11:04.74939 kern.warn: qla2x00_loop_resync(): **** FAILED ****
2007-06-13_00:11:04.77101 kern.warn: scsi(6): qla2x00_loop_resync - end
2007-06-13_00:11:13.66824 kern.warn: scsi(6): Loop Down - aborting the queues before time expire
2007-06-13_00:14:57.67913 kern.warn: scsi(6): Loop down exceed 4 mins - restarting queues.
2007-06-13_00:18:59.66261 kern.notice: ReiserFS: sdb1: found reiserfs format "3.6" with standard journal
2007-06-13_00:18:59.67418 kern.notice: ReiserFS: sdb1: using ordered data mode
2007-06-13_00:18:59.70499 kern.notice: ReiserFS: sdb1: journal params: device sdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
2007-06-13_00:18:59.71799 kern.notice: ReiserFS: sdb1: checking transaction log (sdb1)
2007-06-13_00:19:00.36535 kern.notice: ReiserFS: sdb1: Using r5 hash to sort names
2007-06-13_00:19:00.37791 kern.warn: ReiserFS: sdb1: warning: Created .reiserfs_priv on sdb1 - reserved for xattr storage.
2007-06-13_19:46:16.08535 kern.warn: ReiserFS: sdb1: warning: vs-4080: reiserfs_free_block: free_block (sdb1:67469615)[dev:blocknr]: bit already cleared
2007-06-13_19:47:26.94266 kern.warn: ReiserFS: sdb1: warning: vs-4080: reiserfs_free_block: free_block (sdb1:67469616)[dev:blocknr]: bit already cleared
2007-06-13_19:47:40.73310 kern.warn: ReiserFS: sdb1: warning: vs-4080: reiserfs_free_block: free_block (sdb1:67469617)[dev:blocknr]: bit already cleared
2007-06-13_19:47:40.75729 kern.warn: ReiserFS: sdb1: warning: vs-4080: reiserfs_free_block: free_block (sdb1:67469614)[dev:blocknr]: bit already cleared
2007-06-13_19:47:40.77323 kern.warn: ReiserFS: sdb1: warning: vs-4080: reiserfs_free_block: free_block (sdb1:67469618)[dev:blocknr]: bit already cleared
2007-06-13_19:51:54.33912 kern.warn: ReiserFS: sdb1: warning: vs-4080: reiserfs_free_block: free_block (sdb1:67469613)[dev:blocknr]: bit already cleared

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: qla2xxx errors? (2.6.19)
  2007-06-12 17:48 ` Andrew Vasquez
  2007-06-12 19:15   ` Csillag Tamas
  2007-06-13 20:23   ` Csillag Tamas
@ 2007-06-21 21:41   ` Csillag Tamas
  2007-06-26 12:46     ` Andrew Vasquez
  2 siblings, 1 reply; 8+ messages in thread
From: Csillag Tamas @ 2007-06-21 21:41 UTC (permalink / raw)
  To: Andrew Vasquez; +Cc: linux-scsi

Hi Andrew,

On 06/12, Andrew Vasquez wrote:
...
> I can setup somthing similar locally, I take it you are writing
> directly some some lun exported off the DS400, and not using DM?
...

Do you have any results? Does the information I sent regarding my
system helped?

Please tell me if you need more information or anything that can help.

Thanks.
-- 
CSILLAG Tamas (cstamas) - http://digitus.itk.ppke.hu/~cstamas

"I busted a mirror and got seven years bad luck, but my lawyer
thinks he can get me five."
                 -- Steven Wright

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: qla2xxx errors? (2.6.19)
  2007-06-21 21:41   ` Csillag Tamas
@ 2007-06-26 12:46     ` Andrew Vasquez
  2007-06-26 14:31       ` James Bottomley
  0 siblings, 1 reply; 8+ messages in thread
From: Andrew Vasquez @ 2007-06-26 12:46 UTC (permalink / raw)
  To: Csillag Tamas; +Cc: linux-scsi

On Thu, 21 Jun 2007, Csillag Tamas wrote:

> Hi Andrew,
> 
> On 06/12, Andrew Vasquez wrote:
> ...
> > I can setup somthing similar locally, I take it you are writing
> > directly some some lun exported off the DS400, and not using DM?
> ...
> 
> Do you have any results? Does the information I sent regarding my
> system helped?
> 
> Please tell me if you need more information or anything that can help.

The initial logs don't indicate any 'notable' driver issues during the
I/O test.  Concurrently, we've been unable to reproduce on similar
storage along with other array devices.  I've escalated this to our
formal support group (which should be in contact with you shortly) in
hopes of triaging this further and getting resolution.

Regards,
Andrew Vasquez

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: qla2xxx errors? (2.6.19)
  2007-06-26 12:46     ` Andrew Vasquez
@ 2007-06-26 14:31       ` James Bottomley
  2007-07-02 23:40         ` Csillag Tamas
  0 siblings, 1 reply; 8+ messages in thread
From: James Bottomley @ 2007-06-26 14:31 UTC (permalink / raw)
  To: Andrew Vasquez; +Cc: Csillag Tamas, linux-scsi

On Tue, 2007-06-26 at 05:46 -0700, Andrew Vasquez wrote:
> On Thu, 21 Jun 2007, Csillag Tamas wrote:
> 
> > Hi Andrew,
> > 
> > On 06/12, Andrew Vasquez wrote:
> > ...
> > > I can setup somthing similar locally, I take it you are writing
> > > directly some some lun exported off the DS400, and not using DM?
> > ...
> > 
> > Do you have any results? Does the information I sent regarding my
> > system helped?
> > 
> > Please tell me if you need more information or anything that can help.
> 
> The initial logs don't indicate any 'notable' driver issues during the
> I/O test.  Concurrently, we've been unable to reproduce on similar
> storage along with other array devices.  I've escalated this to our
> formal support group (which should be in contact with you shortly) in
> hopes of triaging this further and getting resolution.

The DS400 is actually a discontinued array ... any chance the original
reproducer could redo the test with an LSI or an Emulex FC adapter just
to see if its qlogic or array related?

James



^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: qla2xxx errors? (2.6.19)
  2007-06-26 14:31       ` James Bottomley
@ 2007-07-02 23:40         ` Csillag Tamas
  0 siblings, 0 replies; 8+ messages in thread
From: Csillag Tamas @ 2007-07-02 23:40 UTC (permalink / raw)
  To: James Bottomley; +Cc: Andrew Vasquez, linux-scsi

On 06/26, James Bottomley wrote:
> On Tue, 2007-06-26 at 05:46 -0700, Andrew Vasquez wrote:
> > On Thu, 21 Jun 2007, Csillag Tamas wrote:
> > > Hi Andrew,
> > > 
> > > On 06/12, Andrew Vasquez wrote:
> > > ...
> > > > I can setup somthing similar locally, I take it you are writing
> > > > directly some some lun exported off the DS400, and not using DM?
> > > ...
> > > 
> > > Do you have any results? Does the information I sent regarding my
> > > system helped?
> > > 
> > > Please tell me if you need more information or anything that can help.
> > 
> > The initial logs don't indicate any 'notable' driver issues during the
> > I/O test.  Concurrently, we've been unable to reproduce on similar
> > storage along with other array devices.  I've escalated this to our
> > formal support group (which should be in contact with you shortly) in
> > hopes of triaging this further and getting resolution.
> 
> The DS400 is actually a discontinued array ... any chance the original
> reproducer could redo the test with an LSI or an Emulex FC adapter just
> to see if its qlogic or array related?

Well. I do not have any other card right now. The problem only appears
with kernel version > 2.6.18. So I do not think that this is array
related.

If you say it is worth trying with other cards I will try to borrow one,
but please confirm first as it is not easy for me to get one.

Thanks.

Best regards,
cstamas
-- 
CSILLAG Tamas (cstamas) - http://digitus.itk.ppke.hu/~cstamas


^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2007-07-02 23:40 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-06-10 10:00 qla2xxx errors? (2.6.19) Csillag Tamas
2007-06-12 17:48 ` Andrew Vasquez
2007-06-12 19:15   ` Csillag Tamas
2007-06-13 20:23   ` Csillag Tamas
2007-06-21 21:41   ` Csillag Tamas
2007-06-26 12:46     ` Andrew Vasquez
2007-06-26 14:31       ` James Bottomley
2007-07-02 23:40         ` Csillag Tamas

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).