[PATCH 01] kmalloc + memset conversion co kzalloc

[PATCH 01] kmalloc + memset conversion co kzalloc

[Mariusz Kozlowski]

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>

 drivers/scsi/a4000t.c | 3534 -> 3457 (-77 bytes)

 drivers/scsi/a4000t.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

--- linux-2.6.23-rc1-mm1-a/drivers/scsi/a4000t.c	2007-07-26 13:07:42.000000000 +0200
+++ linux-2.6.23-rc1-mm1-b/drivers/scsi/a4000t.c	2007-07-31 14:00:37.000000000 +0200
@@ -37,7 +37,7 @@ static struct platform_device *a4000t_sc

 static int __devinit a4000t_probe(struct device *dev)
 {
-	struct Scsi_Host * host = NULL;
+	struct Scsi_Host *host;
 	struct NCR_700_Host_Parameters *hostdata;

 	if (!(MACH_IS_AMIGA && AMIGAHW_PRESENT(A4000_SCSI)))
@@ -47,12 +47,11 @@ static int __devinit a4000t_probe(struct
 				"A4000T builtin SCSI"))
 		goto out;

-	hostdata = kmalloc(sizeof(struct NCR_700_Host_Parameters), GFP_KERNEL);
-	if (hostdata == NULL) {
+	hostdata = kzalloc(sizeof(struct NCR_700_Host_Parameters), GFP_KERNEL);
+	if (!hostdata) {
 		printk(KERN_ERR "a4000t-scsi: Failed to allocate host data\n");
 		goto out_release;
 	}
-	memset(hostdata, 0, sizeof(struct NCR_700_Host_Parameters));

 	/* Fill in the required pieces of hostdata */
 	hostdata->base = (void __iomem *)ZTWO_VADDR(A4000T_SCSI_ADDR);

[PATCH 02] kmalloc + memset conversion to kzalloc

[Mariusz Kozlowski]

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>

 drivers/scsi/aic7xxx_old.c | 367101 -> 366983 (-118 bytes)
 drivers/scsi/aic7xxx_old.o | 333892 -> 333192 (-700 bytes)

 drivers/scsi/aic7xxx_old.c |    8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

--- linux-2.6.23-rc1-mm1-a/drivers/scsi/aic7xxx_old.c	2007-07-26 13:07:42.000000000 +0200
+++ linux-2.6.23-rc1-mm1-b/drivers/scsi/aic7xxx_old.c	2007-07-31 14:03:31.000000000 +0200
@@ -8416,10 +8416,9 @@ aic7xxx_alloc(struct scsi_host_template
     *p = *temp;
     p->host = host;

-    p->scb_data = kmalloc(sizeof(scb_data_type), GFP_ATOMIC);
-    if (p->scb_data != NULL)
+    p->scb_data = kzalloc(sizeof(scb_data_type), GFP_ATOMIC);
+    if (!p->scb_data)
     {
-      memset(p->scb_data, 0, sizeof(scb_data_type));
       scbq_init (&p->scb_data->free_scbs);
     }
     else
@@ -9196,10 +9195,9 @@ aic7xxx_detect(struct scsi_host_template
             printk(KERN_INFO "         this driver, we are ignoring it.\n");
           }
         }
-        else if ( (temp_p = kmalloc(sizeof(struct aic7xxx_host),
+        else if ( (temp_p = kzalloc(sizeof(struct aic7xxx_host),
                                     GFP_ATOMIC)) != NULL )
         {
-          memset(temp_p, 0, sizeof(struct aic7xxx_host));
           temp_p->chip = aic_pdevs[i].chip | AHC_PCI;
           temp_p->flags = aic_pdevs[i].flags;
           temp_p->features = aic_pdevs[i].features;

[PATCH 06] drivers/scsi/bvme6000_scsi.c: kmalloc + memset conversion to kzalloc

[Mariusz Kozlowski]

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>

 drivers/scsi/bvme6000_scsi.c | 3330 -> 3253 (-77 bytes)

 drivers/scsi/bvme6000_scsi.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

--- linux-2.6.23-rc1-mm1-a/drivers/scsi/bvme6000_scsi.c	2007-07-26 13:07:42.000000000 +0200
+++ linux-2.6.23-rc1-mm1-b/drivers/scsi/bvme6000_scsi.c	2007-07-31 14:04:50.000000000 +0200
@@ -36,19 +36,18 @@ static struct platform_device *bvme6000_
 static __devinit int
 bvme6000_probe(struct device *dev)
 {
-	struct Scsi_Host * host = NULL;
+	struct Scsi_Host *host;
 	struct NCR_700_Host_Parameters *hostdata;

 	if (!MACH_IS_BVME6000)
 		goto out;

-	hostdata = kmalloc(sizeof(struct NCR_700_Host_Parameters), GFP_KERNEL);
-	if (hostdata == NULL) {
+	hostdata = kzalloc(sizeof(struct NCR_700_Host_Parameters), GFP_KERNEL);
+	if (!hostdata) {
 		printk(KERN_ERR "bvme6000-scsi: "
 				"Failed to allocate host data\n");
 		goto out;
 	}
-	memset(hostdata, 0, sizeof(struct NCR_700_Host_Parameters));

 	/* Fill in the required pieces of hostdata */
 	hostdata->base = (void __iomem *)BVME_NCR53C710_BASE;

[PATCH 21] drivers/scsi/dpt_i2o.c: kmalloc + memset conversion to kzalloc

[Mariusz Kozlowski]

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>

 drivers/scsi/dpt_i2o.c | 87632 -> 87457 (-175 bytes)
 drivers/scsi/dpt_i2o.o | 213064 -> 212324 (-740 bytes)

 drivers/scsi/dpt_i2o.c |   27 +++++++++++----------------
 1 file changed, 11 insertions(+), 16 deletions(-)

--- linux-2.6.23-rc1-mm1-a/drivers/scsi/dpt_i2o.c	2007-07-26 13:07:42.000000000 +0200
+++ linux-2.6.23-rc1-mm1-b/drivers/scsi/dpt_i2o.c	2007-07-31 11:17:32.000000000 +0200
@@ -950,16 +950,14 @@ static int adpt_install_hba(struct scsi_
 	}

 	// Allocate and zero the data structure
-	pHba = kmalloc(sizeof(adpt_hba), GFP_KERNEL);
-	if( pHba == NULL) {
-		if(msg_addr_virt != base_addr_virt){
+	pHba = kzalloc(sizeof(adpt_hba), GFP_KERNEL);
+	if (!pHba) {
+		if (msg_addr_virt != base_addr_virt)
 			iounmap(msg_addr_virt);
-		}
 		iounmap(base_addr_virt);
 		pci_release_regions(pDev);
 		return -ENOMEM;
 	}
-	memset(pHba, 0, sizeof(adpt_hba));

 	mutex_lock(&adpt_configuration_lock);

@@ -2667,14 +2665,13 @@ static s32 adpt_i2o_init_outbound_q(adpt

 	msg=(u32 __iomem *)(pHba->msg_addr_virt+m);

-	status = kmalloc(4,GFP_KERNEL|ADDR32);
-	if (status==NULL) {
+	status = kzalloc(4, GFP_KERNEL|ADDR32);
+	if (!status) {
 		adpt_send_nop(pHba, m);
 		printk(KERN_WARNING"%s: IOP reset failed - no free memory.\n",
 			pHba->name);
 		return -ENOMEM;
 	}
-	memset(status, 0, 4);

 	writel(EIGHT_WORD_MSG_SIZE| SGL_OFFSET_6, &msg[0]);
 	writel(I2O_CMD_OUTBOUND_INIT<<24 | HOST_TID<<12 | ADAPTER_TID, &msg[1]);
@@ -2713,12 +2710,11 @@ static s32 adpt_i2o_init_outbound_q(adpt

 	kfree(pHba->reply_pool);

-	pHba->reply_pool = kmalloc(pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4, GFP_KERNEL|ADDR32);
-	if(!pHba->reply_pool){
-		printk(KERN_ERR"%s: Could not allocate reply pool\n",pHba->name);
-		return -1;
+	pHba->reply_pool = kzalloc(pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4, GFP_KERNEL|ADDR32);
+	if (!pHba->reply_pool) {
+		printk(KERN_ERR "%s: Could not allocate reply pool\n", pHba->name);
+		return -ENOMEM;
 	}
-	memset(pHba->reply_pool, 0 , pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4);

 	ptr = pHba->reply_pool;
 	for(i = 0; i < pHba->reply_fifo_size; i++) {
@@ -2929,12 +2925,11 @@ static int adpt_i2o_build_sys_table(void

 	kfree(sys_tbl);

-	sys_tbl = kmalloc(sys_tbl_len, GFP_KERNEL|ADDR32);
-	if(!sys_tbl) {
+	sys_tbl = kzalloc(sys_tbl_len, GFP_KERNEL|ADDR32);
+	if (!sys_tbl) {
 		printk(KERN_WARNING "SysTab Set failed. Out of memory.\n");
 		return -ENOMEM;
 	}
-	memset(sys_tbl, 0, sys_tbl_len);

 	sys_tbl->num_entries = hba_count;
 	sys_tbl->version = I2OVERSION;

RE: [PATCH 21] drivers/scsi/dpt_i2o.c: kmalloc + memset conversion to kzalloc

[Salyzyn, Mark]

ACK

Looks good and ultra-light on side effects!

Sincerely -- Mark Salyzyn

> -----Original Message-----
> From: Mariusz Kozlowski [mailto:m.kozlowski@tuxland.pl] 
> Sent: Tuesday, July 31, 2007 1:35 PM
> To: linux-kernel@vger.kernel.org
> Cc: kernel-janitors@vger.kernel.org; Andrew Morton; 
> linux-scsi@vger.kernel.org; AACRAID
> Subject: [PATCH 21] drivers/scsi/dpt_i2o.c: kmalloc + memset 
> conversion to kzalloc
> 
> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
> 
>  drivers/scsi/dpt_i2o.c | 87632 -> 87457 (-175 bytes)
>  drivers/scsi/dpt_i2o.o | 213064 -> 212324 (-740 bytes)
> 
>  drivers/scsi/dpt_i2o.c |   27 +++++++++++----------------
>  1 file changed, 11 insertions(+), 16 deletions(-)

[PATCH 26] drivers/scsi/gdth.c: kmalloc + memset conversion to kzalloc

[Mariusz Kozlowski]

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>

 drivers/scsi/gdth.c | 189401 -> 189342 (-59 bytes)
 drivers/scsi/gdth.o | 331028 -> 330324 (-704 bytes)

 drivers/scsi/gdth.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- linux-2.6.23-rc1-mm1-a/drivers/scsi/gdth.c	2007-07-26 13:07:42.000000000 +0200
+++ linux-2.6.23-rc1-mm1-b/drivers/scsi/gdth.c	2007-07-31 14:08:37.000000000 +0200
@@ -458,10 +458,10 @@ int __gdth_execute(struct scsi_device *s
     DECLARE_COMPLETION_ONSTACK(wait);
     int rval;

-    scp = kmalloc(sizeof(*scp), GFP_KERNEL);
+    scp = kzalloc(sizeof(*scp), GFP_KERNEL);
     if (!scp)
         return -ENOMEM;
-    memset(scp, 0, sizeof(*scp));
+
     scp->device = sdev;
     /* use request field to save the ptr. to completion struct. */
     scp->request = (struct request *)&wait;
@@ -5273,10 +5273,10 @@ static int gdth_ioctl(struct inode *inod
         hanum = res.ionode;
         ha = gdth_find_ha(hanum);

-        scp  = kmalloc(sizeof(*scp), GFP_KERNEL);
+        scp = kzalloc(sizeof(*scp), GFP_KERNEL);
         if (!scp)
             return -ENOMEM;
-        memset(scp, 0, sizeof(*scp));
+
         scp->device = ha->sdev;
         scp->cmd_len = 12;
         scp->use_sg = 0;

[PATCH 31] drivers/scsi/ide-scsi.c: kmalloc + memset conversion to kzalloc

[Mariusz Kozlowski]

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>

 drivers/scsi/ide-scsi.c | 34642 -> 34536 (-106 bytes)
 drivers/scsi/ide-scsi.o | 171728 -> 171524 (-204 bytes)

 drivers/scsi/ide-scsi.c |   10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

--- linux-2.6.23-rc1-mm1-a/drivers/scsi/ide-scsi.c	2007-07-26 13:07:42.000000000 +0200
+++ linux-2.6.23-rc1-mm1-b/drivers/scsi/ide-scsi.c	2007-07-31 14:09:51.000000000 +0200
@@ -328,17 +328,15 @@ static int idescsi_check_condition(ide_d
 	u8             *buf;

 	/* stuff a sense request in front of our current request */
-	pc = kmalloc (sizeof (idescsi_pc_t), GFP_ATOMIC);
-	rq = kmalloc (sizeof (struct request), GFP_ATOMIC);
-	buf = kmalloc(SCSI_SENSE_BUFFERSIZE, GFP_ATOMIC);
-	if (pc == NULL || rq == NULL || buf == NULL) {
+	pc = kzalloc(sizeof(idescsi_pc_t), GFP_ATOMIC);
+	rq = kmalloc(sizeof(struct request), GFP_ATOMIC);
+	buf = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_ATOMIC);
+	if (!pc || !rq || !buf) {
 		kfree(buf);
 		kfree(rq);
 		kfree(pc);
 		return -ENOMEM;
 	}
-	memset (pc, 0, sizeof (idescsi_pc_t));
-	memset (buf, 0, SCSI_SENSE_BUFFERSIZE);
 	ide_init_drive_cmd(rq);
 	rq->special = (char *) pc;
 	pc->rq = rq;

Re: [PATCH 31] drivers/scsi/ide-scsi.c: kmalloc + memset conversion to kzalloc

[Bartlomiej Zolnierkiewicz]

On Tuesday 31 July 2007, Mariusz Kozlowski wrote:
> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
> 
>  drivers/scsi/ide-scsi.c | 34642 -> 34536 (-106 bytes)
>  drivers/scsi/ide-scsi.o | 171728 -> 171524 (-204 bytes)
> 
>  drivers/scsi/ide-scsi.c |   10 ++++------
>  1 file changed, 4 insertions(+), 6 deletions(-)

applied

[PATCH 44] drivers/scsi/lpfc/lpfc_debugfs.c: kmalloc + memset conversion to kcalloc

[Mariusz Kozlowski]

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>

 drivers/scsi/lpfc/lpfc_debugfs.c | 13809 -> 13716 (-93 bytes)
 drivers/scsi/lpfc/lpfc_debugfs.o | 146124 -> 146124 (0 bytes)

 drivers/scsi/lpfc/lpfc_debugfs.c |    7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

--- linux-2.6.23-rc1-mm1-a/drivers/scsi/lpfc/lpfc_debugfs.c	2007-07-26 13:07:42.000000000 +0200
+++ linux-2.6.23-rc1-mm1-b/drivers/scsi/lpfc/lpfc_debugfs.c	2007-07-31 14:11:24.000000000 +0200
@@ -432,14 +432,11 @@ lpfc_debugfs_initialize(struct lpfc_vpor
 	if (!lpfc_debugfs_start_time)
 		lpfc_debugfs_start_time = jiffies;

-	vport->disc_trc = kmalloc(
-		(sizeof(struct lpfc_disc_trc) * lpfc_debugfs_max_disc_trc),
-		GFP_KERNEL);
+	vport->disc_trc = kcalloc(lpfc_debugfs_max_disc_trc,
+				  sizeof(struct lpfc_disc_trc),	GFP_KERNEL);

 	if (!vport->disc_trc)
 		goto debug_failed;
-	memset(vport->disc_trc, 0,
-		(sizeof(struct lpfc_disc_trc) * lpfc_debugfs_max_disc_trc));

 	snprintf(name, sizeof(name), "discovery_trace");
 	vport->debug_disc_trc =

Re: [PATCH 44] drivers/scsi/lpfc/lpfc_debugfs.c: kmalloc + memset conversion to kcalloc

[James Smart]

ACK

-- james s

Mariusz Kozlowski wrote:
> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
> 
>  drivers/scsi/lpfc/lpfc_debugfs.c | 13809 -> 13716 (-93 bytes)
>  drivers/scsi/lpfc/lpfc_debugfs.o | 146124 -> 146124 (0 bytes)
> 
>  drivers/scsi/lpfc/lpfc_debugfs.c |    7 ++-----
>  1 file changed, 2 insertions(+), 5 deletions(-)
> 
> --- linux-2.6.23-rc1-mm1-a/drivers/scsi/lpfc/lpfc_debugfs.c	2007-07-26 13:07:42.000000000 +0200
> +++ linux-2.6.23-rc1-mm1-b/drivers/scsi/lpfc/lpfc_debugfs.c	2007-07-31 14:11:24.000000000 +0200
> @@ -432,14 +432,11 @@ lpfc_debugfs_initialize(struct lpfc_vpor
>  	if (!lpfc_debugfs_start_time)
>  		lpfc_debugfs_start_time = jiffies;
> 
> -	vport->disc_trc = kmalloc(
> -		(sizeof(struct lpfc_disc_trc) * lpfc_debugfs_max_disc_trc),
> -		GFP_KERNEL);
> +	vport->disc_trc = kcalloc(lpfc_debugfs_max_disc_trc,
> +				  sizeof(struct lpfc_disc_trc),	GFP_KERNEL);
> 
>  	if (!vport->disc_trc)
>  		goto debug_failed;
> -	memset(vport->disc_trc, 0,
> -		(sizeof(struct lpfc_disc_trc) * lpfc_debugfs_max_disc_trc));
> 
>  	snprintf(name, sizeof(name), "discovery_trace");
>  	vport->debug_disc_trc =
> 

[PATCH 45] drivers/scsi/lpfc/lpfc_init.c: kmalloc + memset conversion to kcalloc

[Mariusz Kozlowski]

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>

 drivers/scsi/lpfc/lpfc_init.c | 65932 -> 65881 (-51 bytes)
 drivers/scsi/lpfc/lpfc_init.o | 219760 -> 219616 (-144 bytes)

 drivers/scsi/lpfc/lpfc_init.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- linux-2.6.23-rc1-mm1-a/drivers/scsi/lpfc/lpfc_init.c	2007-07-26 13:07:42.000000000 +0200
+++ linux-2.6.23-rc1-mm1-b/drivers/scsi/lpfc/lpfc_init.c	2007-07-31 11:07:59.000000000 +0200
@@ -1280,11 +1280,10 @@ lpfc_hba_init(struct lpfc_hba *phba, uin
 	uint32_t *HashWorking;
 	uint32_t *pwwnn = (uint32_t *) phba->wwnn;

-	HashWorking = kmalloc(80 * sizeof(uint32_t), GFP_KERNEL);
+	HashWorking = kcalloc(80, sizeof(uint32_t), GFP_KERNEL);
 	if (!HashWorking)
 		return;

-	memset(HashWorking, 0, (80 * sizeof(uint32_t)));
 	HashWorking[0] = HashWorking[78] = *pwwnn++;
 	HashWorking[1] = HashWorking[79] = *pwwnn;

Re: [PATCH 45] drivers/scsi/lpfc/lpfc_init.c: kmalloc + memset conversion to kcalloc

[James Smart]

ACK

-- james s

Mariusz Kozlowski wrote:
> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
> 
>  drivers/scsi/lpfc/lpfc_init.c | 65932 -> 65881 (-51 bytes)
>  drivers/scsi/lpfc/lpfc_init.o | 219760 -> 219616 (-144 bytes)
> 
>  drivers/scsi/lpfc/lpfc_init.c |    3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
> 
> --- linux-2.6.23-rc1-mm1-a/drivers/scsi/lpfc/lpfc_init.c	2007-07-26 13:07:42.000000000 +0200
> +++ linux-2.6.23-rc1-mm1-b/drivers/scsi/lpfc/lpfc_init.c	2007-07-31 11:07:59.000000000 +0200
> @@ -1280,11 +1280,10 @@ lpfc_hba_init(struct lpfc_hba *phba, uin
>  	uint32_t *HashWorking;
>  	uint32_t *pwwnn = (uint32_t *) phba->wwnn;
> 
> -	HashWorking = kmalloc(80 * sizeof(uint32_t), GFP_KERNEL);
> +	HashWorking = kcalloc(80, sizeof(uint32_t), GFP_KERNEL);
>  	if (!HashWorking)
>  		return;
> 
> -	memset(HashWorking, 0, (80 * sizeof(uint32_t)));
>  	HashWorking[0] = HashWorking[78] = *pwwnn++;
>  	HashWorking[1] = HashWorking[79] = *pwwnn;
> 
> 

[PATCH 46] drivers/scsi/lpfc/lpfc_scsi.c: kmalloc + memset conversion to kzalloc

[Mariusz Kozlowski]

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>

 drivers/scsi/lpfc/lpfc_scsi.c | 42769 -> 42721 (-48 bytes)
 drivers/scsi/lpfc/lpfc_scsi.o | 191332 -> 191240 (-92 bytes)

 drivers/scsi/lpfc/lpfc_scsi.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- linux-2.6.23-rc1-mm1-a/drivers/scsi/lpfc/lpfc_scsi.c	2007-07-26 13:07:42.000000000 +0200
+++ linux-2.6.23-rc1-mm1-b/drivers/scsi/lpfc/lpfc_scsi.c	2007-07-31 11:08:46.000000000 +0200
@@ -208,10 +208,9 @@ lpfc_new_scsi_buf(struct lpfc_vport *vpo
 	dma_addr_t pdma_phys;
 	uint16_t iotag;

-	psb = kmalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
+	psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
 	if (!psb)
 		return NULL;
-	memset(psb, 0, sizeof (struct lpfc_scsi_buf));

 	/*
 	 * Get memory from the pci pool to map the virt space to pci bus space

Re: [PATCH 46] drivers/scsi/lpfc/lpfc_scsi.c: kmalloc + memset conversion to kzalloc

[James Smart]

ACK

-- james s

Mariusz Kozlowski wrote:
> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
> 
>  drivers/scsi/lpfc/lpfc_scsi.c | 42769 -> 42721 (-48 bytes)
>  drivers/scsi/lpfc/lpfc_scsi.o | 191332 -> 191240 (-92 bytes)
> 
>  drivers/scsi/lpfc/lpfc_scsi.c |    3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
> 
> --- linux-2.6.23-rc1-mm1-a/drivers/scsi/lpfc/lpfc_scsi.c	2007-07-26 13:07:42.000000000 +0200
> +++ linux-2.6.23-rc1-mm1-b/drivers/scsi/lpfc/lpfc_scsi.c	2007-07-31 11:08:46.000000000 +0200
> @@ -208,10 +208,9 @@ lpfc_new_scsi_buf(struct lpfc_vport *vpo
>  	dma_addr_t pdma_phys;
>  	uint16_t iotag;
> 
> -	psb = kmalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
> +	psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
>  	if (!psb)
>  		return NULL;
> -	memset(psb, 0, sizeof (struct lpfc_scsi_buf));
> 
>  	/*
>  	 * Get memory from the pci pool to map the virt space to pci bus space
> 

[PATCH] lpfc : lpfc_debugfs.c kmalloc + memset conversion to kzalloc

[James Smart]

One more area, introduced by the lpfc 8.2.2 patches, that need the 
  kmalloc+memset conversion.

This patch to be applied atop the 8.2.2 patches.

-- james s


Signed-off-by: James Smart <James.Smart@emulex.com>


diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index 2e3c01b..ef99e2b 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -856,9 +856,9 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport)
 			goto debug_failed;
 		}
 		if (!phba->slow_ring_trc) {
-			phba->slow_ring_trc = kmalloc(
-				(sizeof(struct lpfc_debugfs_trc) *
-				lpfc_debugfs_max_slow_ring_trc),
+			phba->slow_ring_trc = kcalloc(
+				lpfc_debugfs_max_slow_ring_trc,
+				sizeof(struct lpfc_debugfs_trc),
 				GFP_KERNEL);
 			if (!phba->slow_ring_trc) {
 				lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
@@ -867,9 +867,6 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport)
 				goto debug_failed;
 			}
 			atomic_set(&phba->slow_ring_trc_cnt, 0);
-			memset(phba->slow_ring_trc, 0,
-				(sizeof(struct lpfc_debugfs_trc) *
-				lpfc_debugfs_max_slow_ring_trc));
 		}
 	}
 

[PATCH] lpfc : lpfc_debugfs.c kmalloc + memset conversion to kzalloc

[James Smart]

One more area, introduced by the lpfc 8.2.2 patches, that need the 
  kmalloc+memset conversion.

This patch to be applied atop the 8.2.2 patches.

-- james s


Signed-off-by: James Smart <James.Smart@emulex.com>


diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index 2e3c01b..ef99e2b 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -856,9 +856,9 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport)
 			goto debug_failed;
 		}
 		if (!phba->slow_ring_trc) {
-			phba->slow_ring_trc = kmalloc(
-				(sizeof(struct lpfc_debugfs_trc) *
-				lpfc_debugfs_max_slow_ring_trc),
+			phba->slow_ring_trc = kcalloc(
+				lpfc_debugfs_max_slow_ring_trc,
+				sizeof(struct lpfc_debugfs_trc),
 				GFP_KERNEL);
 			if (!phba->slow_ring_trc) {
 				lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
@@ -867,9 +867,6 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport)
 				goto debug_failed;
 			}
 			atomic_set(&phba->slow_ring_trc_cnt, 0);
-			memset(phba->slow_ring_trc, 0,
-				(sizeof(struct lpfc_debugfs_trc) *
-				lpfc_debugfs_max_slow_ring_trc));
 		}
 	}
 

[PATCH] lpfc : lpfc_debugfs.c kmalloc + memset conversion to kzalloc

[James Smart]

One more area, introduced by the lpfc 8.2.2 patches, that need the 
  kmalloc+memset conversion.

This patch to be applied atop the 8.2.2 patches.

-- james s


Signed-off-by: James Smart <James.Smart@emulex.com>


diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index 2e3c01b..ef99e2b 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -856,9 +856,9 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport)
 			goto debug_failed;
 		}
 		if (!phba->slow_ring_trc) {
-			phba->slow_ring_trc = kmalloc(
-				(sizeof(struct lpfc_debugfs_trc) *
-				lpfc_debugfs_max_slow_ring_trc),
+			phba->slow_ring_trc = kcalloc(
+				lpfc_debugfs_max_slow_ring_trc,
+				sizeof(struct lpfc_debugfs_trc),
 				GFP_KERNEL);
 			if (!phba->slow_ring_trc) {
 				lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
@@ -867,9 +867,6 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport)
 				goto debug_failed;
 			}
 			atomic_set(&phba->slow_ring_trc_cnt, 0);
-			memset(phba->slow_ring_trc, 0,
-				(sizeof(struct lpfc_debugfs_trc) *
-				lpfc_debugfs_max_slow_ring_trc));
 		}
 	}
 

[PATCH 47] drivers/scsi/megaraid.c: kmalloc + memset conversion to kzalloc

[Mariusz Kozlowski]

This patch does kmalloc + memset conversion to kzalloc and adds missing check for
kzaloc return value.

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>

 drivers/scsi/megaraid.c | 116109 -> 116094 (-15 bytes)
 drivers/scsi/megaraid.o | 257872 -> 257772 (-100 bytes)

 drivers/scsi/megaraid.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- linux-2.6.23-rc1-mm1-a/drivers/scsi/megaraid.c	2007-07-26 13:07:42.000000000 +0200
+++ linux-2.6.23-rc1-mm1-b/drivers/scsi/megaraid.c	2007-07-31 11:11:58.000000000 +0200
@@ -4408,8 +4408,10 @@ mega_internal_command(adapter_t *adapter
 	scmd = &adapter->int_scmd;
 	memset(scmd, 0, sizeof(Scsi_Cmnd));

-	sdev = kmalloc(sizeof(struct scsi_device), GFP_KERNEL);
-	memset(sdev, 0, sizeof(struct scsi_device));
+	sdev = kzalloc(sizeof(struct scsi_device), GFP_KERNEL);
+	if (!sdev)
+		return -ENOMEM;
+
 	scmd->device = sdev;

 	scmd->device->host = adapter->host;

[PATCH 50] drivers/message/fusion/mptctl.c: mostly kmalloc + memset conversion to kzalloc

[Mariusz Kozlowski]

This patch does kmalloc + memset conversion to kzalloc and simplifies mptctl_probe().

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>

 drivers/message/fusion/mptctl.c | 82092 -> 81884 (-208 bytes)
 drivers/message/fusion/mptctl.o | 201784 -> 200648 (-1136 bytes)

 drivers/message/fusion/mptctl.c |   36 ++++++++++--------------------
 1 file changed, 12 insertions(+), 24 deletions(-)

--- linux-2.6.23-rc1-mm1-a/drivers/message/fusion/mptctl.c	2007-07-26 13:07:44.000000000 +0200
+++ linux-2.6.23-rc1-mm1-b/drivers/message/fusion/mptctl.c	2007-07-31 18:02:38.000000000 +0200
@@ -963,10 +963,9 @@ kbuf_alloc_2_sgl(int bytes, u32 sgdir, i
 	 * structures for the SG elements.
 	 */
 	i = MAX_SGL_BYTES / 8;
-	buflist = kmalloc(i, GFP_USER);
-	if (buflist == NULL)
+	buflist = kzalloc(i, GFP_USER);
+	if (!buflist)
 		return NULL;
-	memset(buflist, 0, i);
 	buflist_ent = 0;

 	/* Allocate a single block of memory to store the sg elements and
@@ -1363,13 +1362,12 @@ mptctl_gettargetinfo (unsigned long arg)
 	 *      15- 8: Bus Number
 	 *       7- 0: Target ID
 	 */
-	pmem = kmalloc(numBytes, GFP_KERNEL);
-	if (pmem == NULL) {
+	pmem = kzalloc(numBytes, GFP_KERNEL);
+	if (!pmem) {
 		printk(KERN_ERR "%s::mptctl_gettargetinfo() @%d - no memory available!\n",
 				__FILE__, __LINE__);
 		return -ENOMEM;
 	}
-	memset(pmem, 0, numBytes);
 	pdata =  (int *) pmem;

 	/* Get number of devices
@@ -1551,12 +1549,11 @@ mptctl_eventenable (unsigned long arg)
 		/* Have not yet allocated memory - do so now.
 		 */
 		int sz = MPTCTL_EVENT_LOG_SIZE * sizeof(MPT_IOCTL_EVENTS);
-		ioc->events = kmalloc(sz, GFP_KERNEL);
-		if (ioc->events == NULL) {
+		ioc->events = kzalloc(sz, GFP_KERNEL);
+		if (!ioc->events) {
 			printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n");
 			return -ENOMEM;
 		}
-		memset(ioc->events, 0, sz);
 		ioc->alloc_total += sz;

 		ioc->eventContext = 0;
@@ -2823,31 +2820,22 @@ static long compat_mpctl_ioctl(struct fi
 static int
 mptctl_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
-	int err;
-	int sz;
-	u8 *mem;
+	MPT_IOCTL *mem;
 	MPT_ADAPTER *ioc = pci_get_drvdata(pdev);

 	/*
 	 * Allocate and inite a MPT_IOCTL structure
 	*/
-	sz = sizeof (MPT_IOCTL);
-	mem = kmalloc(sz, GFP_KERNEL);
-	if (mem == NULL) {
-		err = -ENOMEM;
-		goto out_fail;
+	mem = kzalloc(sizeof(MPT_IOCTL), GFP_KERNEL);
+	if (!mem) {
+		mptctl_remove(pdev);
+		return -ENOMEM;
 	}

-	memset(mem, 0, sz);
-	ioc->ioctl = (MPT_IOCTL *) mem;
+	ioc->ioctl = mem;
 	ioc->ioctl->ioc = ioc;
 	mutex_init(&ioc->ioctl->ioctl_mutex);
 	return 0;
-
-out_fail:
-
-	mptctl_remove(pdev);
-	return err;
 }

 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/

[PATCH 54] drivers/scsi/mvme16x_scsi.c: kmalloc + memset conversion to kzalloc

[Mariusz Kozlowski]

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>

 drivers/scsi/mvme16x_scsi.c | 3740 -> 3678 (-62 bytes)

 drivers/scsi/mvme16x_scsi.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- linux-2.6.23-rc1-mm1-a/drivers/scsi/mvme16x_scsi.c	2007-07-26 13:07:42.000000000 +0200
+++ linux-2.6.23-rc1-mm1-b/drivers/scsi/mvme16x_scsi.c	2007-07-31 11:02:11.000000000 +0200
@@ -48,13 +48,12 @@ mvme16x_probe(struct device *dev)
 		goto out;
 	}

-	hostdata = kmalloc(sizeof(struct NCR_700_Host_Parameters), GFP_KERNEL);
+	hostdata = kzalloc(sizeof(struct NCR_700_Host_Parameters), GFP_KERNEL);
 	if (hostdata == NULL) {
 		printk(KERN_ERR "mvme16x-scsi: "
 				"Failed to allocate host data\n");
 		goto out;
 	}
-	memset(hostdata, 0, sizeof(struct NCR_700_Host_Parameters));

 	/* Fill in the required pieces of hostdata */
 	hostdata->base = (void __iomem *)0xfff47000UL;

[PATCH 56] drivers/scsi/NCR_D700.c: kmalloc + memset conversion to kzalloc

[Mariusz Kozlowski]

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>

 drivers/scsi/NCR_D700.c | 10643 -> 10615 (-28 bytes)
 drivers/scsi/NCR_D700.o | 118400 -> 118196 (-204 bytes)

 drivers/scsi/NCR_D700.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- linux-2.6.23-rc1-mm1-a/drivers/scsi/NCR_D700.c	2007-07-26 13:07:42.000000000 +0200
+++ linux-2.6.23-rc1-mm1-b/drivers/scsi/NCR_D700.c	2007-07-31 11:13:37.000000000 +0200
@@ -313,10 +313,10 @@ NCR_D700_probe(struct device *dev)
 		break;
 	}

-	p = kmalloc(sizeof(*p), GFP_KERNEL);
+	p = kzalloc(sizeof(*p), GFP_KERNEL);
 	if (!p)
 		return -ENOMEM;
-	memset(p, '\0', sizeof(*p));
+
 	p->dev = dev;
 	snprintf(p->name, sizeof(p->name), "D700(%s)", dev->bus_id);
 	if (request_irq(irq, NCR_D700_intr, IRQF_SHARED, p->name, p)) {

[PATCH 61] drivers/scsi/osst.c: kmalloc + memset conversion to kzalloc

[Mariusz Kozlowski]

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>

 drivers/scsi/osst.c | 185412 -> 185361 (-51 bytes)
 drivers/scsi/osst.o | 272432 -> 272344 (-88 bytes)

 drivers/scsi/osst.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- linux-2.6.23-rc1-mm1-a/drivers/scsi/osst.c	2007-07-26 13:07:42.000000000 +0200
+++ linux-2.6.23-rc1-mm1-b/drivers/scsi/osst.c	2007-07-31 14:14:52.000000000 +0200
@@ -5778,13 +5778,12 @@ static int osst_probe(struct device *dev
 	dev_num = i;

 	/* allocate a struct osst_tape for this device */
-	tpnt = kmalloc(sizeof(struct osst_tape), GFP_ATOMIC);
-	if (tpnt == NULL) {
+	tpnt = kzalloc(sizeof(struct osst_tape), GFP_ATOMIC);
+	if (!tpnt) {
 		write_unlock(&os_scsi_tapes_lock);
 		printk(KERN_ERR "osst :E: Can't allocate device descriptor, device not attached.\n");
 		goto out_put_disk;
 	}
-	memset(tpnt, 0, sizeof(struct osst_tape));

 	/* allocate a buffer for this device */
 	i = SDp->host->sg_tablesize;

[PATCH 63] drivers/scsi/pluto.c: mostly kmalloc + memset conversion to kcalloc

[Mariusz Kozlowski]

This patch does kmalloc + memset conversion to kcalloc. Also the following warning is fixed.

  CC      drivers/scsi/pluto.o
  drivers/scsi/pluto.c: In function 'pluto_info':
  drivers/scsi/pluto.c:283: warning: unused variable 'p'

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>

 drivers/scsi/pluto.c | 8787 -> 8657 (-130 bytes)
 drivers/scsi/pluto.o | 125264 -> 124648 (-616 bytes)

 drivers/scsi/pluto.c |   24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)

--- linux-2.6.23-rc1-mm1-a/drivers/scsi/pluto.c	2007-07-26 13:07:42.000000000 +0200
+++ linux-2.6.23-rc1-mm1-b/drivers/scsi/pluto.c	2007-07-31 18:18:38.000000000 +0200
@@ -111,13 +111,12 @@ int __init pluto_detect(struct scsi_host
 #endif
 			return 0;
 	}
-	fcs = kmalloc(sizeof (struct ctrl_inquiry) * fcscount, GFP_DMA);
+	fcs = kcalloc(fcscount, sizeof(struct ctrl_inquiry), GFP_DMA);
 	if (!fcs) {
 		printk ("PLUTO: Not enough memory to probe\n");
 		return 0;
 	}

-	memset (fcs, 0, sizeof (struct ctrl_inquiry) * fcscount);
 	memset (&dev, 0, sizeof(dev));
 	atomic_set (&fcss, fcscount);

@@ -211,12 +210,12 @@ int __init pluto_detect(struct scsi_host
 				char *p;
 				long *ages;

-				ages = kmalloc (((inq->channels + 1) * inq->targets) * sizeof(long), GFP_KERNEL);
-				if (!ages) continue;
+				ages = kcalloc((inq->channels + 1) * inq->targets, sizeof(long), GFP_KERNEL);
+				if (!ages)
+					continue;

 				host = scsi_register (tpnt, sizeof (struct pluto));
-				if(!host)
-				{
+				if (!host) {
 					kfree(ages);
 					continue;
 				}
@@ -238,7 +237,6 @@ int __init pluto_detect(struct scsi_host
 				fc->channels = inq->channels + 1;
 				fc->targets = inq->targets;
 				fc->ages = ages;
-				memset (ages, 0, ((inq->channels + 1) * inq->targets) * sizeof(long));

 				pluto->fc = fc;
 				memcpy (pluto->rev_str, inq->revision, 4);
@@ -260,7 +258,7 @@ int __init pluto_detect(struct scsi_host
 		} else
 			fc->fcp_register(fc, TYPE_SCSI_FCP, 1);
 	}
-	kfree((char *)fcs);
+	kfree(fcs);
 	if (nplutos)
 		printk ("PLUTO: Total of %d SparcSTORAGE Arrays found\n", nplutos);
 	return nplutos;
@@ -282,15 +280,19 @@ int pluto_release(struct Scsi_Host *host

 const char *pluto_info(struct Scsi_Host *host)
 {
-	static char buf[128], *p;
+	static char buf[128];
 	struct pluto *pluto = (struct pluto *) host->hostdata;

 	sprintf(buf, "SUN SparcSTORAGE Array %s fw %s serial %s %dx%d on %s",
 		pluto->rev_str, pluto->fw_rev_str, pluto->serial_str,
 		host->max_channel, host->max_id, pluto->fc->name);
 #ifdef __sparc__
-	p = strchr(buf, 0);
-	sprintf(p, " PROM node %x", pluto->fc->dev->prom_node);
+	{
+		char *p;
+
+		p = strchr(buf, 0);
+		sprintf(p, " PROM node %x", pluto->fc->dev->prom_node);
+	}
 #endif
 	return buf;
 }

[PATCH 64] drivers/scsi/qla2xxx/qla_init.c: mostly kmalloc + memset conversion to k[cz]alloc

[Mariusz Kozlowski]

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>

 drivers/scsi/qla2xxx/qla_init.c | 107445 -> 107327 (-118 bytes)
 drivers/scsi/qla2xxx/qla_init.o | 237540 -> 237424 (-116 bytes)

 drivers/scsi/qla2xxx/qla_init.c |   14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

--- linux-2.6.23-rc1-mm1-a/drivers/scsi/qla2xxx/qla_init.c	2007-07-26 13:07:42.000000000 +0200
+++ linux-2.6.23-rc1-mm1-b/drivers/scsi/qla2xxx/qla_init.c	2007-07-31 14:24:51.000000000 +0200
@@ -1787,12 +1787,11 @@ qla2x00_alloc_fcport(scsi_qla_host_t *ha
 {
 	fc_port_t *fcport;

-	fcport = kmalloc(sizeof(fc_port_t), flags);
-	if (fcport == NULL)
-		return (fcport);
+	fcport = kzalloc(sizeof(fc_port_t), flags);
+	if (!fcport)
+		return NULL;

 	/* Setup fcport template structure. */
-	memset(fcport, 0, sizeof (fc_port_t));
 	fcport->ha = ha;
 	fcport->vp_idx = ha->vp_idx;
 	fcport->port_type = FCT_UNKNOWN;
@@ -1802,7 +1801,7 @@ qla2x00_alloc_fcport(scsi_qla_host_t *ha
 	fcport->supported_classes = FC_COS_UNSPECIFIED;
 	spin_lock_init(&fcport->rport_lock);

-	return (fcport);
+	return fcport;
 }

 /*
@@ -2497,13 +2496,12 @@ qla2x00_find_all_fabric_devs(scsi_qla_ho
 	rval = QLA_SUCCESS;

 	/* Try GID_PT to get device list, else GAN. */
-	swl = kmalloc(sizeof(sw_info_t) * MAX_FIBRE_DEVICES, GFP_ATOMIC);
-	if (swl == NULL) {
+	swl = kcalloc(MAX_FIBRE_DEVICES, sizeof(sw_info_t), GFP_ATOMIC);
+	if (!swl) {
 		/*EMPTY*/
 		DEBUG2(printk("scsi(%ld): GID_PT allocations failed, fallback "
 		    "on GA_NXT\n", ha->host_no));
 	} else {
-		memset(swl, 0, sizeof(sw_info_t) * MAX_FIBRE_DEVICES);
 		if (qla2x00_gid_pt(ha, swl) != QLA_SUCCESS) {
 			kfree(swl);
 			swl = NULL;

Re: [PATCH 64] drivers/scsi/qla2xxx/qla_init.c: mostly kmalloc + memset conversion to k[cz]alloc

[Andrew Vasquez]

On Tue, 31 Jul 2007, Mariusz Kozlowski wrote:

> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
> 
>  drivers/scsi/qla2xxx/qla_init.c | 107445 -> 107327 (-118 bytes)
>  drivers/scsi/qla2xxx/qla_init.o | 237540 -> 237424 (-116 bytes)
> 
>  drivers/scsi/qla2xxx/qla_init.c |   14 ++++++--------
>  1 file changed, 6 insertions(+), 8 deletions(-)

Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com>

[PATCH 82] drivers/scsi/zorro7xx.c: kmalloc + memset conversion to kzalloc

[Mariusz Kozlowski]

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>

 drivers/scsi/zorro7xx.c | 4579 -> 4501 (-78 bytes)

 drivers/scsi/zorro7xx.c |    8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

--- linux-2.6.23-rc1-mm1-a/drivers/scsi/zorro7xx.c	2007-07-26 13:07:42.000000000 +0200
+++ linux-2.6.23-rc1-mm1-b/drivers/scsi/zorro7xx.c	2007-07-31 14:25:58.000000000 +0200
@@ -69,7 +69,7 @@ static struct zorro_device_id zorro7xx_z
 static int __devinit zorro7xx_init_one(struct zorro_dev *z,
 				       const struct zorro_device_id *ent)
 {
-	struct Scsi_Host * host = NULL;
+	struct Scsi_Host *host;
 	struct NCR_700_Host_Parameters *hostdata;
 	struct zorro_driver_data *zdd;
 	unsigned long board, ioaddr;
@@ -89,14 +89,12 @@ static int __devinit zorro7xx_init_one(s
 		return -EBUSY;
 	}

-	hostdata = kmalloc(sizeof(struct NCR_700_Host_Parameters), GFP_KERNEL);
-	if (hostdata == NULL) {
+	hostdata = kzalloc(sizeof(struct NCR_700_Host_Parameters), GFP_KERNEL);
+	if (!hostdata) {
 		printk(KERN_ERR "zorro7xx: Failed to allocate host data\n");
 		goto out_release;
 	}

-	memset(hostdata, 0, sizeof(struct NCR_700_Host_Parameters));
-
 	/* Fill in the required pieces of hostdata */
 	if (ioaddr > 0x01000000)
 		hostdata->base = ioremap(ioaddr, zorro_resource_len(z));

Re: [PATCH 82] drivers/scsi/zorro7xx.c: kmalloc + memset conversion to kzalloc

[James Bottomley]

On Wed, 2007-08-01 at 00:21 +0200, Mariusz Kozlowski wrote:
> [PATCH 82] ...

Please no.  This should be a simple mechanical substitution.  I don't
need to collect acks from everyone.  This is a nice point to do a
conversion like this, so I'll sort out the mismerges.

Please assure me you have a good methodology for doing the replacement
and a reasonable one for testing and then send either one patch for the
entirety of SCSI to me, or one patch for the entirety of the kernel to
Andrew and we'll see if we can get it through the process.

James