From: FUJITA Tomonori <tomof@acm.org>
To: matthew@wil.cx
Cc: tomof@acm.org, James.Bottomley@SteelEye.com,
linux-scsi@vger.kernel.org, fujita.tomonori@lab.ntt.co.jp
Subject: Re: [PATCH 16/22] advansys: Eliminate prototypes
Date: Mon, 17 Sep 2007 08:17:21 +0900 [thread overview]
Message-ID: <20070915231931B.tomof@acm.org> (raw)
In-Reply-To: <20070916230349.GE28350@parisc-linux.org>
On Sun, 16 Sep 2007 17:03:50 -0600
Matthew Wilcox <matthew@wil.cx> wrote:
> On Mon, Sep 17, 2007 at 07:41:06AM +0900, FUJITA Tomonori wrote:
> > On Sun, 16 Sep 2007 09:31:34 -0600
> > Matthew Wilcox <matthew@wil.cx> wrote:
> >
> > > On Sat, Sep 15, 2007 at 09:39:05AM -0500, James Bottomley wrote:
> > > > I get a compile failure at this point in your patch sequence:
> > >
> > > Thanks. I'd been compiling with CONFIG_ISA=n, so hadn't spotted these
> > > two problems. I've set it back to Y now.
> >
> > If I compile your latest patchset with CONFIG_ISA=n, I got:
> >
> > drivers/built-in.o: In function `advansys_init':
> > advansys.c:(.init.text+0x3efb): undefined reference to `isa_register_driver'
> > advansys.c:(.init.text+0x3f22): undefined reference to `isa_unregister_driver'
>
> Fixed by http://marc.info/?l=linux-kernel&m=118780055118323&w=2 which I
> thought was in -mm, but I can't find it. I've just reset it to Linus &
> Andrew. Thanks for mentioning it.
Oh, I see.
> Now I'm back home, I'll add your sg patch to my tree. I'd forgotten
> about it ...
I updated the previous patch for your latest patchset. I removed the
sg chaining support so you can send it to scsi-misc now.
Just a one-line patch is necessary for the sg chaining support. It'll
be push to mainline via Jens' tree.
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Subject: [PATCH] advansys: convert to use the data buffer accessors
- remove the unnecessary map_single path.
- convert to use the new accessors for the sg lists and the
parameters.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
---
drivers/scsi/advansys.c | 83 +++++++++++++---------------------------------
1 files changed, 24 insertions(+), 59 deletions(-)
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index bd5bbc9..bc24f74 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -4301,15 +4301,7 @@ advansys_proc_info(struct Scsi_Host *shost, char *buffer, char **start,
static void asc_scsi_done(struct scsi_cmnd *scp)
{
- struct asc_board *boardp = shost_priv(scp->device->host);
-
- if (scp->use_sg)
- dma_unmap_sg(boardp->dev,
- (struct scatterlist *)scp->request_buffer,
- scp->use_sg, scp->sc_data_direction);
- else if (scp->request_bufflen)
- dma_unmap_single(boardp->dev, scp->SCp.dma_handle,
- scp->request_bufflen, scp->sc_data_direction);
+ scsi_dma_unmap(scp);
ASC_STATS(scp->device->host, done);
@@ -8210,11 +8202,11 @@ static void adv_isr_callback(ADV_DVC_VAR *adv_dvc_varp, ADV_SCSI_REQ_Q *scsiqp)
* then return the number of underrun bytes.
*/
resid_cnt = le32_to_cpu(scsiqp->data_cnt);
- if (scp->request_bufflen != 0 && resid_cnt != 0 &&
- resid_cnt <= scp->request_bufflen) {
+ if (scsi_bufflen(scp) != 0 && resid_cnt != 0 &&
+ resid_cnt <= scsi_bufflen(scp)) {
ASC_DBG(1, "underrun condition %lu bytes\n",
(ulong)resid_cnt);
- scp->resid = resid_cnt;
+ scsi_set_resid(scp, resid_cnt);
}
break;
@@ -9877,6 +9869,7 @@ static int advansys_slave_configure(struct scsi_device *sdev)
static int asc_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
struct asc_scsi_q *asc_scsi_q)
{
+ int use_sg;
memset(asc_scsi_q, 0, sizeof(*asc_scsi_q));
/*
@@ -9919,40 +9912,28 @@ static int asc_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
* Build ASC_SCSI_Q for a contiguous buffer or a scatter-gather
* buffer command.
*/
- if (scp->use_sg == 0) {
+ use_sg = scsi_dma_map(scp);
+ if (use_sg == 0) {
/*
* CDB request of single contiguous buffer.
*/
ASC_STATS(scp->device->host, cont_cnt);
- scp->SCp.dma_handle = scp->request_bufflen ?
- dma_map_single(boardp->dev, scp->request_buffer,
- scp->request_bufflen,
- scp->sc_data_direction) : 0;
- asc_scsi_q->q1.data_addr = cpu_to_le32(scp->SCp.dma_handle);
- asc_scsi_q->q1.data_cnt = cpu_to_le32(scp->request_bufflen);
+ scp->SCp.dma_handle = 0;
ASC_STATS_ADD(scp->device->host, cont_xfer,
ASC_CEILING(scp->request_bufflen, 512));
- asc_scsi_q->q1.sg_queue_cnt = 0;
- asc_scsi_q->sg_head = NULL;
} else {
/*
* CDB scatter-gather request list.
*/
int sgcnt;
- int use_sg;
struct scatterlist *slp;
struct asc_sg_head *asc_sg_head;
- slp = (struct scatterlist *)scp->request_buffer;
- use_sg = dma_map_sg(boardp->dev, slp, scp->use_sg,
- scp->sc_data_direction);
-
if (use_sg > scp->device->host->sg_tablesize) {
scmd_printk(KERN_ERR, scp, "use_sg %d > "
"sg_tablesize %d\n", use_sg,
scp->device->host->sg_tablesize);
- dma_unmap_sg(boardp->dev, slp, scp->use_sg,
- scp->sc_data_direction);
+ scsi_dma_unmap(scp);
scp->result = HOST_BYTE(DID_ERROR);
return ASC_ERROR;
}
@@ -9962,8 +9943,7 @@ static int asc_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
asc_sg_head = kzalloc(sizeof(asc_scsi_q->sg_head) +
use_sg * sizeof(struct asc_sg_list), GFP_ATOMIC);
if (!asc_sg_head) {
- dma_unmap_sg(boardp->dev, slp, scp->use_sg,
- scp->sc_data_direction);
+ scsi_dma_unmap(scp);
scp->result = HOST_BYTE(DID_SOFT_ERROR);
return ASC_ERROR;
}
@@ -9980,7 +9960,7 @@ static int asc_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
/*
* Convert scatter-gather list into ASC_SG_HEAD list.
*/
- for (sgcnt = 0; sgcnt < use_sg; sgcnt++, slp++) {
+ scsi_for_each_sg(scp, slp, use_sg, sgcnt) {
asc_sg_head->sg_list[sgcnt].addr =
cpu_to_le32(sg_dma_address(slp));
asc_sg_head->sg_list[sgcnt].bytes =
@@ -10021,7 +10001,7 @@ adv_get_sglist(struct asc_board *boardp, adv_req_t *reqp, struct scsi_cmnd *scp,
int i;
scsiqp = (ADV_SCSI_REQ_Q *)ADV_32BALIGN(&reqp->scsi_req_q);
- slp = (struct scatterlist *)scp->request_buffer;
+ slp = scsi_sglist(scp);
sg_elem_cnt = use_sg;
prev_sg_block = NULL;
reqp->sgblkp = NULL;
@@ -10126,6 +10106,7 @@ adv_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
ADV_SCSI_REQ_Q *scsiqp;
int i;
int ret;
+ int use_sg;
/*
* Allocate an adv_req_t structure from the board to execute
@@ -10187,49 +10168,33 @@ adv_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
* buffer command.
*/
- scsiqp->data_cnt = cpu_to_le32(scp->request_bufflen);
- scsiqp->vdata_addr = scp->request_buffer;
- scsiqp->data_addr = cpu_to_le32(virt_to_bus(scp->request_buffer));
-
- if (scp->use_sg == 0) {
+ scsiqp->data_cnt = cpu_to_le32(scsi_bufflen(scp));
+ use_sg = scsi_dma_map(scp);
+ if (use_sg == 0) {
/*
* CDB request of single contiguous buffer.
*/
reqp->sgblkp = NULL;
- scsiqp->data_cnt = cpu_to_le32(scp->request_bufflen);
- if (scp->request_bufflen) {
- scsiqp->vdata_addr = scp->request_buffer;
- scp->SCp.dma_handle =
- dma_map_single(boardp->dev, scp->request_buffer,
- scp->request_bufflen,
- scp->sc_data_direction);
- } else {
- scsiqp->vdata_addr = NULL;
- scp->SCp.dma_handle = 0;
- }
- scsiqp->data_addr = cpu_to_le32(scp->SCp.dma_handle);
+
+ scsiqp->data_cnt = 0;
+ scsiqp->vdata_addr = NULL;
+ scp->SCp.dma_handle = 0;
+
+ scsiqp->data_addr = 0;
scsiqp->sg_list_ptr = NULL;
scsiqp->sg_real_addr = 0;
ASC_STATS(scp->device->host, cont_cnt);
- ASC_STATS_ADD(scp->device->host, cont_xfer,
- ASC_CEILING(scp->request_bufflen, 512));
+ ASC_STATS_ADD(scp->device->host, cont_xfer, 0);
} else {
/*
* CDB scatter-gather request list.
*/
- struct scatterlist *slp;
- int use_sg;
-
- slp = (struct scatterlist *)scp->request_buffer;
- use_sg = dma_map_sg(boardp->dev, slp, scp->use_sg,
- scp->sc_data_direction);
if (use_sg > ADV_MAX_SG_LIST) {
scmd_printk(KERN_ERR, scp, "use_sg %d > "
"ADV_MAX_SG_LIST %d\n", use_sg,
scp->device->host->sg_tablesize);
- dma_unmap_sg(boardp->dev, slp, scp->use_sg,
- scp->sc_data_direction);
+ scsi_dma_unmap(scp);
scp->result = HOST_BYTE(DID_ERROR);
/*
--
1.5.2.4
next prev parent reply other threads:[~2007-09-16 23:17 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-09 14:53 [0/22] Advansys updates 2007-09-09 Matthew Wilcox
2007-09-09 14:56 ` [PATCH 01/22] advansys: Fix VLB driver name Matthew Wilcox
2007-09-09 14:56 ` [PATCH 02/22] advansys: Create AdvBuildCarrierFreelist Matthew Wilcox
2007-09-09 14:56 ` [PATCH 03/22] advansys: Create AdvLoadMicrocode Matthew Wilcox
2007-09-09 14:56 ` [PATCH 04/22] advansys: Reformat microcode Matthew Wilcox
2007-09-09 14:56 ` [PATCH 05/22] advansys: Shrink advansys_board_found a little more Matthew Wilcox
2007-09-09 14:56 ` [PATCH 06/22] advansys: Remove `waiting' queue Matthew Wilcox
2007-09-09 14:56 ` [PATCH 07/22] advansys: Remove a check for an impossible condition Matthew Wilcox
2007-09-09 14:56 ` [PATCH 08/22] advansys: Remove `done' queue Matthew Wilcox
2007-09-09 14:56 ` [PATCH 09/22] advansys: Remove `active' queue and all remaining internal queueing code Matthew Wilcox
2007-09-09 14:56 ` [PATCH 10/22] advansys: Enable interrupts earlier in queuecommand Matthew Wilcox
2007-09-09 14:56 ` [PATCH 11/22] advansys: Support 16-byte commands properly Matthew Wilcox
2007-09-09 14:56 ` [PATCH 12/22] advansys: Remove a check for an impossible condition Matthew Wilcox
2007-09-09 14:56 ` [PATCH 13/22] advansys: Remove some custom wrappers Matthew Wilcox
2007-09-09 14:56 ` [PATCH 14/22] advansys: Comment/indentation/macro cleanup Matthew Wilcox
2007-09-09 14:56 ` [PATCH 15/22] advansys: Use DRV_NAME Matthew Wilcox
2007-09-09 14:56 ` [PATCH 16/22] advansys: Eliminate prototypes Matthew Wilcox
2007-09-09 15:29 ` Jeff Garzik
2007-09-09 17:48 ` Matthew Wilcox
2007-09-15 14:39 ` James Bottomley
2007-09-16 15:31 ` Matthew Wilcox
2007-09-16 22:41 ` FUJITA Tomonori
2007-09-16 23:03 ` Matthew Wilcox
2007-09-16 23:17 ` FUJITA Tomonori [this message]
2007-09-17 12:21 ` Matthew Wilcox
2007-09-16 15:37 ` [PATCH 01/17] " Matthew Wilcox
2007-09-16 15:37 ` [PATCH 02/17] advansys: Remove array of scsi targets Matthew Wilcox
2007-09-16 15:37 ` [PATCH 03/17] advansys: Restructure asc_execute_scsi_cmnd() Matthew Wilcox
2007-09-16 15:37 ` [PATCH 04/17] advansys: Fix simultaneous calls to ->queuecommand Matthew Wilcox
2007-09-16 15:37 ` [PATCH 05/17] advansys: Improve reset handler Matthew Wilcox
2007-09-16 15:37 ` [PATCH 06/17] advansys: Remove ASC_SELECT_QUEUE_DEPTHS Matthew Wilcox
2007-09-16 15:37 ` [PATCH 07/17] advansys: Remove ASC_WIDE_BOARD predicate Matthew Wilcox
2007-09-16 15:37 ` [PATCH 08/17] advansys: Sort out irq number mess Matthew Wilcox
2007-09-16 15:37 ` [PATCH 09/17] advansys: Merge ASC_IERR definitions Matthew Wilcox
2007-09-16 15:37 ` [PATCH 10/17] advansys: Remove asc_board_t typedef and ASC_BOARDP macro Matthew Wilcox
2007-09-16 16:14 ` Matthew Wilcox
2007-09-16 15:37 ` [PATCH 11/17] advansys: Remove library version & serial numbers Matthew Wilcox
2007-09-16 15:37 ` [PATCH 12/17] advansys: Sort out debug macros Matthew Wilcox
2007-09-16 15:37 ` [PATCH 13/17] advansys: Remove private lock Matthew Wilcox
2007-09-16 15:37 ` [PATCH 14/17] advansys: Get rid of board index number Matthew Wilcox
2007-09-16 15:37 ` [PATCH 15/17] advansys: Make sdtr_period_tbl a pointer Matthew Wilcox
2007-09-16 15:37 ` [PATCH 16/17] advansys: Move a couple of fields from struct board to struct adv_dvc Matthew Wilcox
2007-09-16 15:37 ` [PATCH 17/17] advansys: Remove DvcGetPhyAddr Matthew Wilcox
2007-09-16 20:39 ` [PATCH 10/17] advansys: Remove asc_board_t typedef and ASC_BOARDP macro Matthew Wilcox
2007-09-09 14:56 ` [PATCH 17/22] advansys: Remove array of scsi targets Matthew Wilcox
2007-09-09 14:56 ` [PATCH 18/22] advansys: Restructure asc_execute_scsi_cmnd() Matthew Wilcox
2007-09-09 14:56 ` [PATCH 19/22] advansys: Fix simultaneous calls to ->queuecommand Matthew Wilcox
2007-09-09 14:56 ` [PATCH 20/22] advansys: Improve reset handler Matthew Wilcox
2007-09-09 14:56 ` [PATCH 21/22] advansys: Remove ASC_SELECT_QUEUE_DEPTHS Matthew Wilcox
2007-09-09 14:56 ` [PATCH 22/22] advansys: Remove ASC_WIDE_BOARD predicate Matthew Wilcox
2007-09-10 20:00 ` [0/22] Advansys updates 2007-09-09 FUJITA Tomonori
2007-09-11 18:18 ` Matthew Wilcox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070915231931B.tomof@acm.org \
--to=tomof@acm.org \
--cc=James.Bottomley@SteelEye.com \
--cc=fujita.tomonori@lab.ntt.co.jp \
--cc=linux-scsi@vger.kernel.org \
--cc=matthew@wil.cx \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).