* Re: 2.6.24-rc2-mm1 -- QLogics ISP1020 gone missing
[not found] <20071113175906.497a1a6a.akpm@linux-foundation.org>
@ 2007-11-15 10:50 ` Andy Whitcroft
0 siblings, 0 replies; only message in thread
From: Andy Whitcroft @ 2007-11-15 10:50 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, linux-scsi, linux-driver, Kamalesh Babulal
All of our machines with QLogics ISP1020 cards seem to have lost them on
boot with 2.6.24-rc1-mm1+hotfixes.
# lspci
0000:00:0a.0 SCSI storage controller: QLogic Corp. ISP1020 Fast-wide
SCSI (rev 05)
# lspci -n
0000:00:0a.0 0100: 1077:1020 (rev 05)
# lspci -v -v
0000:00:0a.0 SCSI storage controller: QLogic Corp. ISP1020 Fast-wide SCSI (rev 05)
Subsystem: QLogic Corp.: Unknown device 0000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at fc00 [size=256]
Region 1: Memory at fa000000 (32-bit, non-prefetchable) [size=4K]
These devices are normally reported as below, which I note is not as a
1020?
qla1280: QLA1040 found on PCI bus 0, dev 10
scsi(0:0): Resetting SCSI BUS
scsi0 : QLogic QLA1040 PCI to SCSI Host Adapter
Firmware version: 7.65.06, Driver version 3.26
There is nothing major around in the area so I am somewhat bemused.
-apw
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2007-11-15 10:50 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20071113175906.497a1a6a.akpm@linux-foundation.org>
2007-11-15 10:50 ` 2.6.24-rc2-mm1 -- QLogics ISP1020 gone missing Andy Whitcroft
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).