From: "Prakash, Sathya" <sathya.prakash@lsi.com>
To: linux-scsi@vger.kernel.org
Cc: eric.moore@lsi.com
Subject: [PATCH 2/3] mpt fusion: Fix for module unload problem in flash less controller environment
Date: Fri, 11 Jan 2008 14:42:17 +0530 [thread overview]
Message-ID: <20080111091217.GC4161@lsil.com> (raw)
This patch fixes the module unload problem in flash less 1030 controller
environment where firmware download boot functionality is invoked.
The problem is due to the firmware download is being done in the reverse order,
which this patch solves by insureing the download occurs to the last controller
being reset.
signed-off-by: Sathya Prakash <sathya.prakash@lsi.com>
---
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 9476ad2..d733438 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -2086,7 +2086,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"mpt_upload: alt_%s has cached_fw=%p \n",
ioc->name, ioc->alt_ioc->name, ioc->alt_ioc->cached_fw));
- ioc->alt_ioc->cached_fw = NULL;
+ ioc->cached_fw = NULL;
}
} else {
printk(MYIOC_s_WARN_FMT
@@ -2292,10 +2292,12 @@ mpt_adapter_disable(MPT_ADAPTER *ioc)
int ret;
if (ioc->cached_fw != NULL) {
- ddlprintk(ioc, printk(MYIOC_s_INFO_FMT
- "mpt_adapter_disable: Pushing FW onto adapter\n", ioc->name));
- if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *)ioc->cached_fw, NO_SLEEP)) < 0) {
- printk(MYIOC_s_WARN_FMT "firmware downloadboot failure (%d)!\n",
+ ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: Pushing FW onto "
+ "adapter\n", __FUNCTION__, ioc->name));
+ if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *)
+ ioc->cached_fw, CAN_SLEEP)) < 0) {
+ printk(MYIOC_s_WARN_FMT
+ ": firmware downloadboot failure (%d)!\n",
ioc->name, ret);
}
}
@@ -2333,13 +2335,7 @@ mpt_adapter_disable(MPT_ADAPTER *ioc)
ioc->alloc_total -= sz;
}
- if (ioc->cached_fw != NULL) {
- sz = ioc->facts.FWImageSize;
- pci_free_consistent(ioc->pcidev, sz,
- ioc->cached_fw, ioc->cached_fw_dma);
- ioc->cached_fw = NULL;
- ioc->alloc_total -= sz;
- }
+ mpt_free_fw_memory(ioc);
kfree(ioc->spi_data.nvram);
mpt_inactive_raid_list_free(ioc);
@@ -3080,44 +3076,62 @@ SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
*
* If memory has already been allocated, the same (cached) value
* is returned.
- */
-void
+ *
+ * Return 0 if successfull, or non-zero for failure
+ **/
+int
mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size)
{
- if (ioc->cached_fw)
- return; /* use already allocated memory */
- if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
+ int rc;
+
+ if (ioc->cached_fw) {
+ rc = 0; /* use already allocated memory */
+ goto out;
+ }
+ else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
ioc->cached_fw = ioc->alt_ioc->cached_fw; /* use alt_ioc's memory */
ioc->cached_fw_dma = ioc->alt_ioc->cached_fw_dma;
- ioc->alloc_total += size;
- ioc->alt_ioc->alloc_total -= size;
+ rc = 0;
+ goto out;
+ }
+ ioc->cached_fw = pci_alloc_consistent(ioc->pcidev, size, &ioc->cached_fw_dma);
+ if (!ioc->cached_fw) {
+ printk(MYIOC_s_ERR_FMT "Unable to allocate memory for the cached firmware image!\n",
+ ioc->name);
+ rc = -1;
} else {
- if ( (ioc->cached_fw = pci_alloc_consistent(ioc->pcidev, size, &ioc->cached_fw_dma) ) )
- ioc->alloc_total += size;
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Image @ %p[%p], sz=%d[%x] bytes\n",
+ ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, size, size));
+ ioc->alloc_total += size;
+ rc = 0;
}
+ out:
+ return rc;
}
+
/**
* mpt_free_fw_memory - free firmware memory
* @ioc: Pointer to MPT_ADAPTER structure
*
* If alt_img is NULL, delete from ioc structure.
* Else, delete a secondary image in same format.
- */
+ **/
void
mpt_free_fw_memory(MPT_ADAPTER *ioc)
{
int sz;
+ if (!ioc->cached_fw)
+ return;
+
sz = ioc->facts.FWImageSize;
- dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "free_fw_memory: FW Image @ %p[%p], sz=%d[%x] bytes\n",
- ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "free_fw_memory: FW Image @ %p[%p], sz=%d[%x] bytes\n",
+ ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
pci_free_consistent(ioc->pcidev, sz, ioc->cached_fw, ioc->cached_fw_dma);
+ ioc->alloc_total -= sz;
ioc->cached_fw = NULL;
-
- return;
}
-
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mpt_do_upload - Construct and Send FWUpload request to MPT adapter port.
@@ -3149,17 +3163,12 @@ mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag)
if ((sz = ioc->facts.FWImageSize) == 0)
return 0;
- mpt_alloc_fw_memory(ioc, sz);
+ if (mpt_alloc_fw_memory(ioc, ioc->facts.FWImageSize) != 0)
+ return -ENOMEM;
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": FW Image @ %p[%p], sz=%d[%x] bytes\n",
ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
- if (ioc->cached_fw == NULL) {
- /* Major Failure.
- */
- return -ENOMEM;
- }
-
prequest = (sleepFlag == NO_SLEEP) ? kzalloc(ioc->req_sz, GFP_ATOMIC) :
kzalloc(ioc->req_sz, GFP_KERNEL);
if (!prequest) {
@@ -3531,12 +3540,12 @@ KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag)
static int
mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
{
- MPT_ADAPTER *iocp=NULL;
u32 diag0val;
u32 doorbell;
int hard_reset_done = 0;
int count = 0;
u32 diag1val = 0;
+ MpiFwHeader_t *cached_fw; /* Pointer to FW */
/* Clear any existing interrupts */
CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
@@ -3668,22 +3677,24 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
}
if (ioc->cached_fw)
- iocp = ioc;
+ cached_fw = (MpiFwHeader_t *)ioc->cached_fw;
else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw)
- iocp = ioc->alt_ioc;
- if (iocp) {
+ cached_fw = (MpiFwHeader_t *)ioc->alt_ioc->cached_fw;
+ else
+ cached_fw = NULL;
+ if (cached_fw) {
/* If the DownloadBoot operation fails, the
* IOC will be left unusable. This is a fatal error
* case. _diag_reset will return < 0
*/
for (count = 0; count < 30; count ++) {
- diag0val = CHIPREG_READ32(&iocp->chip->Diagnostic);
+ diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
break;
}
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "cached_fw: diag0val=%x count=%d\n",
- iocp->name, diag0val, count));
+ ioc->name, diag0val, count));
/* wait 1 sec */
if (sleepFlag == CAN_SLEEP) {
msleep (1000);
@@ -3691,8 +3702,7 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
mdelay (1000);
}
}
- if ((count = mpt_downloadboot(ioc,
- (MpiFwHeader_t *)iocp->cached_fw, sleepFlag)) < 0) {
+ if ((count = mpt_downloadboot(ioc, cached_fw, sleepFlag)) < 0) {
printk(MYIOC_s_WARN_FMT
"firmware downloadboot failure (%d)!\n", ioc->name, count);
}
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index 4031c15..44c98c5 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -908,7 +908,7 @@ extern u32 mpt_GetIocState(MPT_ADAPTER *ioc, int cooked);
extern void mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buf, int *size, int len, int showlan);
extern int mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag);
extern int mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *cfg);
-extern void mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size);
+extern int mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size);
extern void mpt_free_fw_memory(MPT_ADAPTER *ioc);
extern int mpt_findImVolumes(MPT_ADAPTER *ioc);
extern int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
reply other threads:[~2008-01-11 9:22 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080111091217.GC4161@lsil.com \
--to=sathya.prakash@lsi.com \
--cc=eric.moore@lsi.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).