Re: 2.6.24 regression w/ QLA2300

[Andrew Vasquez <andrew.vasquez@qlogic.com>]

On Tue, 05 Feb 2008, Alan D. Brunelle wrote:

> > and send the resultant kernel logs?
> 
> Here's the output to the console (if there are other logs you need,
> let me know). I'll try the patch next, and sorry, hadn't realized
> merges were still coming in under 2.6.24 in Linus' tree... 
> 
> QLogic Fibre Channel HBA Driver
> ACPI: PCI Interrupt 0000:40:01.0[A] -> GSI 38 (level, low) -> IRQ 58
> qla2xxx 0000:40:01.0: Found an ISP2312, irq 58, iobase 0xc0000000a0041000
> qla2xxx 0000:40:01.0: Configuring PCI space...
> qla2x00_get_flash_version(): Unrecognized code type ff at pcids da1c.
> qla2x00_get_flash_version(): Unrecognized code type ff at pcids 1f61c.
> qla2xxx 0000:40:01.0: Configure NVRAM parameters...
> qla2xxx 0000:40:01.0: Verifying loaded RISC code...
> scsi(14): **** Load RISC code ****
> scsi(14): Verifying Checksum of loaded RISC code.
> scsi(14): Checksum OK, start firmware.
> qla2xxx 0000:40:01.0: Allocated (412 KB) for firmware dump...
> scsi(14): Issue init firmware.
> qla2x00_mailbox_command(14): **** FAILED. mbx0=4001, mbx1=0, mbx2=ba8a, cmd=48 ****

Ok, this is what I would have expected with the linus' tree prior to
the fix.  I just double-checked, the fix in question has yet to make
it's way to Linus' tree.  It's currently in scsi-misc-2.6:

http://git.kernel.org/?p=linux/kernel/git/jejb/scsi-misc-2.6.git;a=commitdiff;h=a571fdf7caa010e17f6a70c0c52e0992e87af7db

which should filter up to linux-2.6.git during Linus' next pull.

thanks, av