From mboxrd@z Thu Jan 1 00:00:00 1970 From: Matthew Wilcox Subject: Re: Adaptec 29320LPE errors on boot Date: Wed, 5 Mar 2008 10:11:42 -0700 Message-ID: <20080305171142.GN24386@parisc-linux.org> References: <532ABFBDAAC3A34EB12EBA6CEC2838F4831D6BEF@ADPE2K703.adaptec.com> <1204734777.3047.40.camel@localhost.localdomain> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from palinux.external.hp.com ([192.25.206.14]:42853 "EHLO mail.parisc-linux.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756173AbYCERLn (ORCPT ); Wed, 5 Mar 2008 12:11:43 -0500 Content-Disposition: inline In-Reply-To: Sender: linux-scsi-owner@vger.kernel.org List-Id: linux-scsi@vger.kernel.org To: Rodrigo Severo Cc: linux-scsi@vger.kernel.org On Wed, Mar 05, 2008 at 01:52:50PM -0300, Rodrigo Severo wrote: > I changed the following values on 29320LPE from the previous default ones: > > Sync Transfer Rate: 160 Ah, you've been fooled by SCSI terminology. U160 is 80 million transfers per second, but each transfer is 16-bit wide, so they call it U160. Can you try turning that down to 80 (and just for fun, if that fails, can you try 40?) -- Intel are signing my paycheques ... these opinions are still mine "Bill, look, we understand that you're interested in selling us this operating system, but compare it to ours. We can't possibly take such a retrograde step."