linux-scsi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Denys Vlasenko <vda.linux@googlemail.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Hannes Reinecke <hare@suse.de>,
	linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 0/3] debloat aic7xxx and aic79xx drivers
Date: Sun, 23 Mar 2008 04:40:40 +0100	[thread overview]
Message-ID: <200803230440.40685.vda.linux@googlemail.com> (raw)

[-- Attachment #1: Type: text/plain, Size: 2428 bytes --]

Hi Andrew,

Can you please take these patches into -mm?

I seem to be unable to push them through scsi people,
they silently drop them on the floor.

There patches significantly debloat drivers/scsi/aic7xxx/*.

1-debloat.patch
Deinlines and moves big functions from .h to .c files.
Adds prototypes for ahc_lookup_scb and ahd_lookup_scb to .h files.

2-addstatic.patch
Adds statics, #ifdefs out huge amount of unused code, adds consts

3-addconst.patch
Adds more consts

Driver code/data size reductions with and without debugging enabled
(aic0 is just an unmodified linux-2.6.25-rc6):

   text    data     bss     dec     hex filename
 211264   28258    1172  240694   3ac36 linux-2.6.25-rc6-aic0-TEST/drivers/scsi/aic7xxx/built-in.o
 160012   28258    1172  189442   2e402 linux-2.6.25-rc6-aic1-TEST/drivers/scsi/aic7xxx/built-in.o
 166698   20786    1172  188656   2e0f0 linux-2.6.25-rc6-aic2-TEST/drivers/scsi/aic7xxx/built-in.o
 185014    2346    1172  188532   2e074 linux-2.6.25-rc6-aic3-TEST/drivers/scsi/aic7xxx/built-in.o

   text    data     bss     dec     hex filename
 264496   47922    1188  313606   4c906 linux-2.6.25-rc6-aic0-TEST2/drivers/scsi/aic7xxx/built-in.o
 201056   47922    1188  250166   3d136 linux-2.6.25-rc6-aic1-TEST2/drivers/scsi/aic7xxx/built-in.o
 186564   20786    1188  208538   32e9a linux-2.6.25-rc6-aic2-TEST2/drivers/scsi/aic7xxx/built-in.o
 204880    2346    1188  208414   32e1e linux-2.6.25-rc6-aic3-TEST2/drivers/scsi/aic7xxx/built-in.o

Configs used for these builds are attached to this email
for anyone interested.

make namespacecheck goes from 400+ functions to:
  drivers/scsi/aic7xxx/aic79xx_core.o
    ahd_inq
    ahd_inw
    ahd_outq
    ahd_outw
  drivers/scsi/aic7xxx/aic79xx_osm.o
    ahd_insb
  drivers/scsi/aic7xxx/aic7xxx_core.o
    ahc_inq
    ahc_outq
  drivers/scsi/aic7xxx/aic7xxx_osm.o
    ahc_insb

None of these patches touch any logic, code changes are pretty minimal.

Compile tested and applies cleanly to 2.6.25-rc6.
I don't have this hardware anymore and cannot run test these patches,
but other people reported success in the past:

On Monday 15 October 2007 14:53, Gabriel C wrote:
> > I can test these patches on an aic7892 controller later on today if you want.
> 
> Works fine for me tested on :
> 
> 03:0e.0 SCSI storage controller [0100]: Adaptec AIC-7892P U160/m [9005:008f] (rev 02)

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
--
vda

[-- Attachment #2: config-TEST.bz2 --]
[-- Type: application/x-bzip2, Size: 7959 bytes --]

[-- Attachment #3: config-TEST2.bz2 --]
[-- Type: application/x-bzip2, Size: 8058 bytes --]

             reply	other threads:[~2008-03-23  3:42 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-03-23  3:40 Denys Vlasenko [this message]
2008-03-23  3:41 ` [PATCH 1/3] debloat aic7xxx and aic79xx drivers Denys Vlasenko
2008-03-23  3:42   ` [PATCH 2/3] " Denys Vlasenko
2008-03-23  3:42     ` [PATCH 3/3] " Denys Vlasenko
2008-04-07 10:36       ` Hannes Reinecke
2008-04-07 10:34     ` [PATCH 2/3] " Hannes Reinecke
2008-04-07 18:00       ` Denys Vlasenko
2008-04-08 12:23         ` Hannes Reinecke
2008-04-08 14:08           ` Denys Vlasenko
2008-04-08 14:54             ` Hannes Reinecke
2008-04-08 15:08               ` Denys Vlasenko
2008-04-14 18:47                 ` Denys Vlasenko
     [not found]                   ` <4804BE68.4000704@suse.de>
2008-04-15 20:10                     ` Denys Vlasenko
2008-04-21  5:10                       ` Denys Vlasenko
2008-04-14 18:46             ` Denys Vlasenko
2008-04-15 14:44               ` Hannes Reinecke
2008-04-07 10:31   ` [PATCH 1/3] " Hannes Reinecke
2008-04-07 18:01     ` Denys Vlasenko
  -- strict thread matches above, loose matches on Subject: below --
2007-10-14 14:58 [PATCH 0/3] " Denys Vlasenko
2007-10-14 17:47 ` Gabriel C
2007-10-15 11:25   ` Denys Vlasenko
2007-10-16 22:01     ` Gabriel C
2007-10-15 13:53   ` Gabriel C
2007-10-18 11:19     ` Denys Vlasenko
2007-08-31 15:13 Denys Vlasenko
2007-08-31 16:27 ` Valdis.Kletnieks
2007-08-31 21:20   ` Denys Vlasenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200803230440.40685.vda.linux@googlemail.com \
    --to=vda.linux@googlemail.com \
    --cc=akpm@linux-foundation.org \
    --cc=hare@suse.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).