From: "Lars Täuber" <taeuber@bbaw.de>
To: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: linux-scsi@vger.kernel.org
Subject: Re: MPTSAS: ("activate status led" | "find disc") in external enclosure
Date: Wed, 23 Apr 2008 09:55:11 +0200 [thread overview]
Message-ID: <20080423095511.f08a0cc5.taeuber@bbaw.de> (raw)
In-Reply-To: <1208880734.3105.24.camel@localhost.localdomain>
[-- Attachment #1: Type: text/plain, Size: 845 bytes --]
Hallo James,
James Bottomley <James.Bottomley@HansenPartnership.com> schrieb:
> On Tue, 2008-04-22 at 09:18 +0200, Lars Täuber wrote:
> You could start by asking the sg_ses tools what you have. You need to
> find the sg device for your enclosure and then do
>
> sg_ses --page=10 /dev/sg<n>
I just did it and attached the output
monosan:~ # sg_ses --page=10 /dev/sg19 > sg19.ses
<<<additional: response too short>>>
> It will print out a list of what the enclosure thinks the addresses for
> the devices are. Then I just need to verify they're SAT format and away
> we can go.
Thanks.
Lars
--
Informationstechnologie
Berlin-Brandenburgische Akademie der Wissenschaften
Jägerstrasse 22-23 10117 Berlin
Tel.: +49 30 20370-352 http://www.bbaw.de
[-- Attachment #2: sg19.ses --]
[-- Type: application/octet-stream, Size: 12430 bytes --]
PROMISE 3U-SAS-16-D BP 0107
enclosure services device
Additional (device) element status diagnostic page:
generation code: 0x0
Element type: Array device, subenclosure id: 0
element index: 0 [0x0]
Transport protocol: SAS
number of phys: 1, not all phys: 1, bay number: 1
phy index: 0
device type: no device attached
initiator port for:
target port for: SATA_device
attached SAS address: 0x50001553561b423f
SAS address: 0x50001553561b4200
phy identifier: 0x0
element index: 1 [0x1]
Transport protocol: SAS
number of phys: 1, not all phys: 1, bay number: 2
phy index: 0
device type: no device attached
initiator port for:
target port for: SATA_device
attached SAS address: 0x50001553561b423f
SAS address: 0x50001553561b4201
phy identifier: 0x0
element index: 2 [0x2]
Transport protocol: SAS
number of phys: 1, not all phys: 1, bay number: 3
phy index: 0
device type: no device attached
initiator port for:
target port for: SATA_device
attached SAS address: 0x50001553561b423f
SAS address: 0x50001553561b4202
phy identifier: 0x0
element index: 3 [0x3]
Transport protocol: SAS
number of phys: 1, not all phys: 1, bay number: 4
phy index: 0
device type: no device attached
initiator port for:
target port for: SATA_device
attached SAS address: 0x50001553561b423f
SAS address: 0x50001553561b4203
phy identifier: 0x0
element index: 4 [0x4]
Transport protocol: SAS
number of phys: 1, not all phys: 1, bay number: 5
phy index: 0
device type: no device attached
initiator port for:
target port for: SATA_device
attached SAS address: 0x50001553561b423f
SAS address: 0x50001553561b4204
phy identifier: 0x0
element index: 5 [0x5]
Transport protocol: SAS
number of phys: 1, not all phys: 1, bay number: 6
phy index: 0
device type: no device attached
initiator port for:
target port for: SATA_device
attached SAS address: 0x50001553561b423f
SAS address: 0x50001553561b4205
phy identifier: 0x0
element index: 6 [0x6]
Transport protocol: SAS
number of phys: 1, not all phys: 1, bay number: 7
phy index: 0
device type: no device attached
initiator port for:
target port for: SATA_device
attached SAS address: 0x50001553561b423f
SAS address: 0x50001553561b4206
phy identifier: 0x0
element index: 7 [0x7]
Transport protocol: SAS
number of phys: 1, not all phys: 1, bay number: 8
phy index: 0
device type: no device attached
initiator port for:
target port for: SATA_device
attached SAS address: 0x50001553561b423f
SAS address: 0x50001553561b4207
phy identifier: 0x0
element index: 8 [0x8]
Transport protocol: SAS
number of phys: 1, not all phys: 1, bay number: 9
phy index: 0
device type: no device attached
initiator port for:
target port for: SATA_device
attached SAS address: 0x50001553561b423f
SAS address: 0x50001553561b4208
phy identifier: 0x0
element index: 9 [0x9]
Transport protocol: SAS
number of phys: 1, not all phys: 1, bay number: 10
phy index: 0
device type: no device attached
initiator port for:
target port for: SATA_device
attached SAS address: 0x50001553561b423f
SAS address: 0x50001553561b4209
phy identifier: 0x0
element index: 10 [0xa]
Transport protocol: SAS
number of phys: 1, not all phys: 1, bay number: 11
phy index: 0
device type: no device attached
initiator port for:
target port for: SATA_device
attached SAS address: 0x50001553561b423f
SAS address: 0x50001553561b420a
phy identifier: 0x0
element index: 11 [0xb]
Transport protocol: SAS
number of phys: 1, not all phys: 1, bay number: 12
phy index: 0
device type: no device attached
initiator port for:
target port for: SATA_device
attached SAS address: 0x50001553561b423f
SAS address: 0x50001553561b420b
phy identifier: 0x0
element index: 12 [0xc]
Transport protocol: SAS
number of phys: 1, not all phys: 1, bay number: 13
phy index: 0
device type: no device attached
initiator port for:
target port for: SATA_device
attached SAS address: 0x50001553561b423f
SAS address: 0x50001553561b420c
phy identifier: 0x0
element index: 13 [0xd]
Transport protocol: SAS
number of phys: 1, not all phys: 1, bay number: 14
phy index: 0
device type: no device attached
initiator port for:
target port for: SATA_device
attached SAS address: 0x50001553561b423f
SAS address: 0x50001553561b420d
phy identifier: 0x0
element index: 14 [0xe]
Transport protocol: SAS
number of phys: 1, not all phys: 1, bay number: 15
phy index: 0
device type: no device attached
initiator port for:
target port for: SATA_device
attached SAS address: 0x50001553561b423f
SAS address: 0x50001553561b420e
phy identifier: 0x0
element index: 15 [0xf]
Transport protocol: SAS
number of phys: 1, not all phys: 1, bay number: 16
phy index: 0
device type: no device attached
initiator port for:
target port for: SATA_device
attached SAS address: 0x50001553561b423f
SAS address: 0x50001553561b420f
phy identifier: 0x0
Element type: Enclosure services controller electronics, subenclosure id: 0
element index: 38 [0x26]
Transport protocol: SAS
number of phys: 24
phy index: 0
phy identifier: 0x50
connector element index: 21, other element index: 83
SAS address: 0x561b423f28002a01
phy index: 1
phy identifier: 0x2c
connector element index: 46, other element index: 3
SAS address: 0x3004320534063607
phy index: 2
phy identifier: 0x38
connector element index: 58, other element index: 9
SAS address: 0x3c0a3e0b400c420d
phy index: 3
phy identifier: 0x44
connector element index: 70, other element index: 15
SAS address: 0x48ff49ff4aff4bff
phy index: 4
phy identifier: 0x4c
connector element index: 77
SAS address: 0x4eff4fff163e0027
phy index: 5
phy identifier: 0x18
connector element index: 0, other element index: 0
SAS address: 0x50001553561b433f
phy index: 6
phy identifier: 0x29
connector element index: 43, other element index: 1
SAS address: 0x2d022f0331043305
phy index: 7
phy identifier: 0x35
connector element index: 55, other element index: 7
SAS address: 0x39083b093d0a3f0b
phy index: 8
phy identifier: 0x41
connector element index: 67, other element index: 13
SAS address: 0x450e470f50ff51ff
phy index: 9
phy identifier: 0x52
connector element index: 83
SAS address: 0x54ff55ff56ff57ff
phy index: 10
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 11
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 12
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 13
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 14
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 15
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 16
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 17
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 18
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 19
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 20
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 21
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 22
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 23
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
element index: 39 [0x27]
Transport protocol: SAS
number of phys: 24
phy index: 0
phy identifier: 0x50
connector element index: 21, other element index: 83
SAS address: 0x561b433f29002b01
phy index: 1
phy identifier: 0x2d
connector element index: 47, other element index: 3
SAS address: 0x3104330535063707
phy index: 2
phy identifier: 0x39
connector element index: 59, other element index: 9
SAS address: 0x3d0a3f0b410c430d
phy index: 3
phy identifier: 0x45
connector element index: 71, other element index: 15
SAS address: 0x50ff51ff52ff53ff
phy index: 4
phy identifier: 0x54
connector element index: 85
SAS address: 0x56ff57ff00000000
phy index: 5
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 6
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 7
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 8
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 9
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 10
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 11
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 12
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 13
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 14
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 15
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 16
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 17
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 18
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 19
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 20
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 21
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 22
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
phy index: 23
phy identifier: 0x0
connector element index: 0, other element index: 0
SAS address: 0x0000000000000000
prev parent reply other threads:[~2008-04-23 7:53 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-18 10:41 MPTSAS: ("activate status led" | "find disc") in external enclosure Lars Täuber
2008-04-18 14:29 ` James Bottomley
2008-04-21 9:01 ` Lars Täuber
2008-04-21 15:16 ` James Bottomley
2008-04-22 7:18 ` Lars Täuber
2008-04-22 15:44 ` Moore, Eric
2008-04-23 8:11 ` Lars Täuber
2008-04-23 15:39 ` Moore, Eric
2008-04-22 16:12 ` James Bottomley
2008-04-23 7:55 ` Lars Täuber [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080423095511.f08a0cc5.taeuber@bbaw.de \
--to=taeuber@bbaw.de \
--cc=James.Bottomley@HansenPartnership.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox