From: Andrew Vasquez <andrew.vasquez@qlogic.com>
To: Gerhard Mack <gmack@innerfire.net>
Cc: linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [2.6.25.1] qla2xxx can't see more than 4 drives
Date: Tue, 6 May 2008 06:51:18 -0700 [thread overview]
Message-ID: <20080506135118.GA46493@plap4.qlogic.org> (raw)
In-Reply-To: <alpine.DEB.1.10.0805031458050.2330@mtl.rackplans.net>
On Sat, 03 May 2008, Gerhard Mack wrote:
> I have an array witjh 6 drives in it and if use the card's utilities on
> boot it sees all of them but for some reason Linux only sees 4 drives.
>
> Am I running into a limit? I can see both drives if I remove other drives
> from the array.
>
> [0:0:0:0] disk MAXTOR ATLAS10K4_36SCA DFM0 /dev/sda
> [0:0:1:0] disk MAXTOR ATLAS10K4_36SCA DFM0 /dev/sdb
> [0:0:2:0] disk MAXTOR ATLAS10K4_36SCA DFM0 /dev/sdc
> [0:0:6:0] process PE/PV 1x3 SCSI BP 0.28 -
> fiber channel drives:
> [2:0:0:0] disk SEAGATE ST314680 CLAR146 7A0A /dev/sdd
> [2:0:1:0] disk SEAGATE ST314680 CLAR146 7A04 /dev/sde
> [2:0:2:0] disk SEAGATE ST314680 CLAR146 7A0A /dev/sdf
> [2:0:3:0] disk SEAGATE ST314680 CLAR146 7A04 /dev/sdg
>
> QLogic Fibre Channel HBA Driver
> qla2xxx 0000:02:0a.0: Found an ISP2312, irq 24, iobase 0xf88cc000
> qla2xxx 0000:02:0a.0: Configuring PCI space...
> qla2xxx 0000:02:0a.0: Configure NVRAM parameters...
> qla2xxx 0000:02:0a.0: Verifying loaded RISC code...
> qla2xxx 0000:02:0a.0: Allocated (412 KB) for firmware dump...
> scsi3 : qla2xxx
> qla2xxx 0000:02:0a.0: LIP reset occured (f8f7).
> qla2xxx 0000:02:0a.0: LIP occured (f8f7).
> qla2xxx 0000:02:0a.0: LOOP UP detected (1 Gbps).
Could you load the driver with the ql2xextended_error_logging module
parameter set to 1 and send the resultant driver logs? Also, it would
could you also send the output of the following after the driver is
loaded:
$ cat /sys/class/fc_host/host<host_no>
$ cat /sys/class/scsi_host/host<host_no>/*
$ cat /sys/class/fc_remote_ports/*
where host_no corresponds to the SCSI host-number assigned to the HBA.
Regards,
Andrew Vasquez
next prev parent reply other threads:[~2008-05-06 13:51 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-03 19:17 [2.6.25.1] qla2xxx can't see more than 4 drives Gerhard Mack
2008-05-06 13:51 ` Andrew Vasquez [this message]
2008-05-06 14:28 ` Gerhard Mack
2008-05-06 22:08 ` Andrew Vasquez
2008-05-07 16:05 ` Gerhard Mack
2008-05-07 16:59 ` Andrew Vasquez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080506135118.GA46493@plap4.qlogic.org \
--to=andrew.vasquez@qlogic.com \
--cc=gmack@innerfire.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox