From: Andrew Morton <akpm@linux-foundation.org>
To: Miquel van Smoorenburg <mikevs@xs4all.net>
Cc: linux-scsi@vger.kernel.org,
Mark Salyzyn <mark_salyzyn@adaptec.com>,
miquels@cistron.nl, Rolf Eike Beer <eike-kernel@sf-tec.de>,
James Bottomley <James.Bottomley@HansenPartnership.com>
Subject: Re: [PATCH 0/4] dpt_i2o: 64 bit support (take 5)
Date: Tue, 6 May 2008 20:10:55 -0700 [thread overview]
Message-ID: <20080506201055.12bf16c4.akpm@linux-foundation.org> (raw)
In-Reply-To: <20080501230211.GA19796@xs4all.net>
On Fri, 2 May 2008 01:02:15 +0200 Miquel van Smoorenburg <mikevs@xs4all.net> wrote:
> These patches update the dpt_i2o driver to work on 64-bit platforms
> like x86_64.
wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee! Mailing list to mainline (while
avoiding checkpatch by 100 miles) in what? Six hours? Hooray for the
merge window!
I'll fix alpha. I'll let someone else ponder ia64:
drivers/scsi/dpt_i2o.c:83: error: `PROC_IA64' undeclared here (not in a function)
drivers/scsi/dpt_i2o.c:83: error: initializer element is not constant
drivers/scsi/dpt_i2o.c:83: error: (near initialization for `DPTI_sig.dsProcessor')
From: Andrew Morton <akpm@linux-foundation.org>
alpha:
drivers/scsi/dpt_i2o.c:1997: error: implicit declaration of function 'adpt_alpha_info'
drivers/scsi/dpt_i2o.c: At top level:
drivers/scsi/dpt_i2o.c:2032: warning: conflicting types for 'adpt_alpha_info'
drivers/scsi/dpt_i2o.c:2032: error: static declaration of 'adpt_alpha_info' follows non-static declaration
drivers/scsi/dpt_i2o.c:1997: error: previous implicit declaration of 'adpt_alpha_info' was here
Due to a copy-n-paste error in drivers/scsi/dpti.h.
Fix that up and remove some of the many daft static-declarations-in-a-header
which this driver enjoys.
Cc: Miquel van Smoorenburg <miquels@cistron.nl>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
drivers/scsi/dpt_i2o.c | 78 ++++++++++++++++++---------------------
drivers/scsi/dpti.h | 13 ------
2 files changed, 36 insertions(+), 55 deletions(-)
diff -puN drivers/scsi/dpt_i2o.c~drivers-scsi-dpt_i2oc-fix-build-on-alpha drivers/scsi/dpt_i2o.c
--- a/drivers/scsi/dpt_i2o.c~drivers-scsi-dpt_i2oc-fix-build-on-alpha
+++ a/drivers/scsi/dpt_i2o.c
@@ -1967,45 +1967,6 @@ cleanup:
return rcode;
}
-
-/*
- * This routine returns information about the system. This does not effect
- * any logic and if the info is wrong - it doesn't matter.
- */
-
-/* Get all the info we can not get from kernel services */
-static int adpt_system_info(void __user *buffer)
-{
- sysInfo_S si;
-
- memset(&si, 0, sizeof(si));
-
- si.osType = OS_LINUX;
- si.osMajorVersion = 0;
- si.osMinorVersion = 0;
- si.osRevision = 0;
- si.busType = SI_PCI_BUS;
- si.processorFamily = DPTI_sig.dsProcessorFamily;
-
-#if defined __i386__
- adpt_i386_info(&si);
-#elif defined (__ia64__)
- adpt_ia64_info(&si);
-#elif defined(__sparc__)
- adpt_sparc_info(&si);
-#elif defined (__alpha__)
- adpt_alpha_info(&si);
-#else
- si.processorType = 0xff ;
-#endif
- if(copy_to_user(buffer, &si, sizeof(si))){
- printk(KERN_WARNING"dpti: Could not copy buffer TO user\n");
- return -EFAULT;
- }
-
- return 0;
-}
-
#if defined __ia64__
static void adpt_ia64_info(sysInfo_S* si)
{
@@ -2016,7 +1977,6 @@ static void adpt_ia64_info(sysInfo_S* si
}
#endif
-
#if defined __sparc__
static void adpt_sparc_info(sysInfo_S* si)
{
@@ -2026,7 +1986,6 @@ static void adpt_sparc_info(sysInfo_S* s
si->processorType = PROC_ULTRASPARC;
}
#endif
-
#if defined __alpha__
static void adpt_alpha_info(sysInfo_S* si)
{
@@ -2038,7 +1997,6 @@ static void adpt_alpha_info(sysInfo_S* s
#endif
#if defined __i386__
-
static void adpt_i386_info(sysInfo_S* si)
{
// This is all the info we need for now
@@ -2059,9 +2017,45 @@ static void adpt_i386_info(sysInfo_S* si
break;
}
}
+#endif
+
+/*
+ * This routine returns information about the system. This does not effect
+ * any logic and if the info is wrong - it doesn't matter.
+ */
+
+/* Get all the info we can not get from kernel services */
+static int adpt_system_info(void __user *buffer)
+{
+ sysInfo_S si;
+
+ memset(&si, 0, sizeof(si));
+
+ si.osType = OS_LINUX;
+ si.osMajorVersion = 0;
+ si.osMinorVersion = 0;
+ si.osRevision = 0;
+ si.busType = SI_PCI_BUS;
+ si.processorFamily = DPTI_sig.dsProcessorFamily;
+#if defined __i386__
+ adpt_i386_info(&si);
+#elif defined (__ia64__)
+ adpt_ia64_info(&si);
+#elif defined(__sparc__)
+ adpt_sparc_info(&si);
+#elif defined (__alpha__)
+ adpt_alpha_info(&si);
+#else
+ si.processorType = 0xff ;
#endif
+ if(copy_to_user(buffer, &si, sizeof(si))){
+ printk(KERN_WARNING"dpti: Could not copy buffer TO user\n");
+ return -EFAULT;
+ }
+ return 0;
+}
static int adpt_ioctl(struct inode *inode, struct file *file, uint cmd,
ulong arg)
diff -puN drivers/scsi/dpti.h~drivers-scsi-dpt_i2oc-fix-build-on-alpha drivers/scsi/dpti.h
--- a/drivers/scsi/dpti.h~drivers-scsi-dpt_i2oc-fix-build-on-alpha
+++ a/drivers/scsi/dpti.h
@@ -316,19 +316,6 @@ static int adpt_close(struct inode *inod
static void adpt_delay(int millisec);
#endif
-#if defined __ia64__
-static void adpt_ia64_info(sysInfo_S* si);
-#endif
-#if defined __sparc__
-static void adpt_sparc_info(sysInfo_S* si);
-#endif
-#if defined __alpha__
-static void adpt_sparc_info(sysInfo_S* si);
-#endif
-#if defined __i386__
-static void adpt_i386_info(sysInfo_S* si);
-#endif
-
#define PRINT_BUFFER_SIZE 512
#define HBA_FLAGS_DBG_FLAGS_MASK 0xffff0000 // Mask for debug flags
_
next prev parent reply other threads:[~2008-05-07 3:11 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-01 23:02 [PATCH 0/4] dpt_i2o: 64 bit support (take 5) Miquel van Smoorenburg
2008-05-01 23:05 ` [PATCH 1/4] dpt_i2o: use standard __init / __exit code Miquel van Smoorenburg
2008-05-02 13:18 ` Mark Salyzyn
2008-05-01 23:06 ` [PATCH 2/4] dpt_i2o: move from virt_to_bus/bus_to_virt to dma_alloc_coherent Miquel van Smoorenburg
2008-05-02 11:25 ` Rolf Eike Beer
2008-05-02 12:15 ` Miquel van Smoorenburg
2008-05-01 23:07 ` [PATCH 3/4] dpt_i2o: 64 bit support Miquel van Smoorenburg
2008-05-02 11:32 ` Rolf Eike Beer
2008-05-01 23:08 ` [PATCH 4/4] dpt_i2o: sysfs code Miquel van Smoorenburg
2008-05-02 13:28 ` Mark Salyzyn
2008-05-07 3:10 ` Andrew Morton [this message]
2008-05-13 5:42 ` [PATCH 0/4] dpt_i2o: 64 bit support (take 5) Andrew Morton
2008-05-13 16:51 ` James Bottomley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080506201055.12bf16c4.akpm@linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=James.Bottomley@HansenPartnership.com \
--cc=eike-kernel@sf-tec.de \
--cc=linux-scsi@vger.kernel.org \
--cc=mark_salyzyn@adaptec.com \
--cc=mikevs@xs4all.net \
--cc=miquels@cistron.nl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox