[Bug 11194] New: megraid_mbox kernel panic during st driver initialization

linux-scsi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

* [Bug 11194] New: megraid_mbox kernel panic during st driver initialization
@ 2008-07-31 14:15 bugme-daemon
  2008-07-31 14:15 ` [Bug 11194] " bugme-daemon
                   ` (7 more replies)
  0 siblings, 8 replies; 11+ messages in thread
From: bugme-daemon @ 2008-07-31 14:15 UTC (permalink / raw)
  To: linux-scsi

http://bugzilla.kernel.org/show_bug.cgi?id=11194

           Summary: megraid_mbox kernel panic during st driver
                    initialization
           Product: IO/Storage
           Version: 2.5
     KernelVersion: 2.6.25
          Platform: All
        OS/Version: Linux
              Tree: Mainline
            Status: NEW
          Severity: normal
          Priority: P1
         Component: SCSI
        AssignedTo: linux-scsi@vger.kernel.org
        ReportedBy: cshore@fionavar.ca


Latest working kernel version: 2.6.24

Earliest failing kernel version: 2.6.26

Distribution: Debian Lenny (-testing + -unstable + kernel trunk for debian)

Hardware Environment: ASUS P4B 2.0 GHz P4 Motherboard, Dell PERC3/DC (like AMI
MegraRAID Elite 1600) LVD Ultra3 SCSI Adaptor with four 80 GB drives on Channel
0 and a SCSI-U2 Seagate DDS-4 tape drive on Channel 1
Software Environment:  Debian Lenny (up-to-date), with some unstable and tested
with the testing kernel (.25) and the trunk kernel (.26)

Problem Description: The kernel panics (claiming it's in the megaraid_mbox
driver) during boot when the st driver would normally report 

st0: Block limits 1 - 16777215 bytes.

This is after the logical disk has been found and all filesystems mounted, so
the RAID part of the driver is probably fine.


The point at which 

st 0:1:6:0: Attached scsi tape st0
st 0:1:6:0: st0: try direct i/o: yes (alignment 512 B)

appears with .24 is passed before the panic, but I haven't actually seen those
messages as they scroll by too quickly.

Steps to reproduce:

1) Install debian lenny with a .24 kernel (I'm not sure how you would do that
now that .24 is no longer the testing kernel); maybe beta2 would still let you.
2) Install -testing kernel (.25)
3) Attempt to boot using the new kernel
4) Kernel panics, system is unusable


-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

^ permalink raw reply	[flat|nested] 11+ messages in thread

* [Bug 11194] megraid_mbox kernel panic during st driver initialization
  2008-07-31 14:15 [Bug 11194] New: megraid_mbox kernel panic during st driver initialization bugme-daemon
@ 2008-07-31 14:15 ` bugme-daemon
  2008-07-31 14:16 ` [Bug 11194] megaraid_mbox " bugme-daemon
                   ` (6 subsequent siblings)
  7 siblings, 0 replies; 11+ messages in thread
From: bugme-daemon @ 2008-07-31 14:15 UTC (permalink / raw)
  To: linux-scsi

http://bugzilla.kernel.org/show_bug.cgi?id=11194


cshore@fionavar.ca changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
         Regression|0                           |1




-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

^ permalink raw reply	[flat|nested] 11+ messages in thread

* [Bug 11194] megaraid_mbox kernel panic during st driver initialization
  2008-07-31 14:15 [Bug 11194] New: megraid_mbox kernel panic during st driver initialization bugme-daemon
  2008-07-31 14:15 ` [Bug 11194] " bugme-daemon
@ 2008-07-31 14:16 ` bugme-daemon
  2008-07-31 14:18 ` bugme-daemon
                   ` (5 subsequent siblings)
  7 siblings, 0 replies; 11+ messages in thread
From: bugme-daemon @ 2008-07-31 14:16 UTC (permalink / raw)
  To: linux-scsi

http://bugzilla.kernel.org/show_bug.cgi?id=11194


cshore@fionavar.ca changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
            Summary|megraid_mbox kernel panic   |megaraid_mbox kernel panic
                   |during st driver            |during st driver
                   |initialization              |initialization




-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

^ permalink raw reply	[flat|nested] 11+ messages in thread

* [Bug 11194] megaraid_mbox kernel panic during st driver initialization
  2008-07-31 14:15 [Bug 11194] New: megraid_mbox kernel panic during st driver initialization bugme-daemon
  2008-07-31 14:15 ` [Bug 11194] " bugme-daemon
  2008-07-31 14:16 ` [Bug 11194] megaraid_mbox " bugme-daemon
@ 2008-07-31 14:18 ` bugme-daemon
  2008-07-31 17:48 ` bugme-daemon
                   ` (4 subsequent siblings)
  7 siblings, 0 replies; 11+ messages in thread
From: bugme-daemon @ 2008-07-31 14:18 UTC (permalink / raw)
  To: linux-scsi

http://bugzilla.kernel.org/show_bug.cgi?id=11194


bunk@kernel.org changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
                 CC|                            |bunk@kernel.org
         AssignedTo|linux-scsi@vger.kernel.org  |scsi_drivers-other@kernel-
                   |                            |bugs.osdl.org
          Component|SCSI                        |Other
            Product|IO/Storage                  |SCSI Drivers




-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
You are the assignee for the bug, or are watching the assignee.

^ permalink raw reply	[flat|nested] 11+ messages in thread

* [Bug 11194] megaraid_mbox kernel panic during st driver initialization
  2008-07-31 14:15 [Bug 11194] New: megraid_mbox kernel panic during st driver initialization bugme-daemon
                   ` (2 preceding siblings ...)
  2008-07-31 14:18 ` bugme-daemon
@ 2008-07-31 17:48 ` bugme-daemon
  2008-07-31 23:45 ` bugme-daemon
                   ` (3 subsequent siblings)
  7 siblings, 0 replies; 11+ messages in thread
From: bugme-daemon @ 2008-07-31 17:48 UTC (permalink / raw)
  To: linux-scsi

http://bugzilla.kernel.org/show_bug.cgi?id=11194





------- Comment #1 from anonymous@kernel-bugs.osdl.org  2008-07-31 10:48 -------
Reply-To: akpm@linux-foundation.org


(switched to email.  Please respond via emailed reply-to-all, not via the
bugzilla web interface).

This bugzilla report appears to not have been sent out to the scsi list.

On Thu, 31 Jul 2008 07:15:37 -0700 (PDT) bugme-daemon@bugzilla.kernel.org
wrote:

> http://bugzilla.kernel.org/show_bug.cgi?id=11194
> 
>            Summary: megraid_mbox kernel panic during st driver
>                     initialization
>            Product: IO/Storage
>            Version: 2.5
>      KernelVersion: 2.6.25
>           Platform: All
>         OS/Version: Linux
>               Tree: Mainline
>             Status: NEW
>           Severity: normal
>           Priority: P1
>          Component: SCSI
>         AssignedTo: linux-scsi@vger.kernel.org
>         ReportedBy: cshore@fionavar.ca
> 
> 
> Latest working kernel version: 2.6.24
> 
> Earliest failing kernel version: 2.6.26

The kernel versions are ambiguous.

Which is the earliest failing kernel version?

> Distribution: Debian Lenny (-testing + -unstable + kernel trunk for debian)
> 
> Hardware Environment: ASUS P4B 2.0 GHz P4 Motherboard, Dell PERC3/DC (like AMI
> MegraRAID Elite 1600) LVD Ultra3 SCSI Adaptor with four 80 GB drives on Channel
> 0 and a SCSI-U2 Seagate DDS-4 tape drive on Channel 1
> Software Environment:  Debian Lenny (up-to-date), with some unstable and tested
> with the testing kernel (.25) and the trunk kernel (.26)
> 
> Problem Description: The kernel panics (claiming it's in the megaraid_mbox
> driver) during boot when the st driver would normally report 
> 
> st0: Block limits 1 - 16777215 bytes.
> 
> This is after the logical disk has been found and all filesystems mounted, so
> the RAID part of the driver is probably fine.
> 
> 
> The point at which 
> 
> st 0:1:6:0: Attached scsi tape st0
> st 0:1:6:0: st0: try direct i/o: yes (alignment 512 B)
> 
> appears with .24 is passed before the panic, but I haven't actually seen those
> messages as they scroll by too quickly.
> 
> Steps to reproduce:
> 
> 1) Install debian lenny with a .24 kernel (I'm not sure how you would do that
> now that .24 is no longer the testing kernel); maybe beta2 would still let you.
> 2) Install -testing kernel (.25)
> 3) Attempt to boot using the new kernel
> 4) Kernel panics, system is unusable
> 


-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

^ permalink raw reply	[flat|nested] 11+ messages in thread

* [Bug 11194] megaraid_mbox kernel panic during st driver initialization
  2008-07-31 14:15 [Bug 11194] New: megraid_mbox kernel panic during st driver initialization bugme-daemon
                   ` (3 preceding siblings ...)
  2008-07-31 17:48 ` bugme-daemon
@ 2008-07-31 23:45 ` bugme-daemon
  2008-08-11  1:55 ` bugme-daemon
                   ` (2 subsequent siblings)
  7 siblings, 0 replies; 11+ messages in thread
From: bugme-daemon @ 2008-07-31 23:45 UTC (permalink / raw)
  To: linux-scsi

http://bugzilla.kernel.org/show_bug.cgi?id=11194





------- Comment #2 from cshore@fionavar.ca  2008-07-31 16:45 -------
On Thu, 31 Jul 2008 10:48:10 -0700
Andrew Morton <akpm@linux-foundation.org> wrote:

> > 
> > Latest working kernel version: 2.6.24
> > Earliest failing kernel version: 2.6.26
> 
> The kernel versions are ambiguous.
> 
> Which is the earliest failing kernel version?

Sorry about that; I did latest failing (unless .27 is out; I haven't
tested it). Earliest failing is 2.6.25.

> 
> > Distribution: Debian Lenny (-testing + -unstable + kernel trunk for
> > debian)
> > 
> > Hardware Environment: ASUS P4B 2.0 GHz P4 Motherboard, Dell
> > PERC3/DC (like AMI MegraRAID Elite 1600) LVD Ultra3 SCSI Adaptor
> > with four 80 GB drives on Channel 0 and a SCSI-U2 Seagate DDS-4
> > tape drive on Channel 1 Software Environment:  Debian Lenny
> > (up-to-date), with some unstable and tested with the testing kernel
> > (.25) and the trunk kernel (.26)
> > 
> > Problem Description: The kernel panics (claiming it's in the
> > megaraid_mbox driver) during boot when the st driver would normally
> > report 
> > 
> > st0: Block limits 1 - 16777215 bytes.
> > 
> > This is after the logical disk has been found and all filesystems
> > mounted, so the RAID part of the driver is probably fine.
> > 
> > 
> > The point at which 
> > 
> > st 0:1:6:0: Attached scsi tape st0
> > st 0:1:6:0: st0: try direct i/o: yes (alignment 512 B)
> > 
> > appears with .24 is passed before the panic, but I haven't actually
> > seen those messages as they scroll by too quickly.
> > 
> > Steps to reproduce:
> > 
> > 1) Install debian lenny with a .24 kernel (I'm not sure how you
> > would do that now that .24 is no longer the testing kernel); maybe
> > beta2 would still let you. 2) Install -testing kernel (.25)
> > 3) Attempt to boot using the new kernel
> > 4) Kernel panics, system is unusable
> > 
> 


-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

^ permalink raw reply	[flat|nested] 11+ messages in thread

* [Bug 11194] megaraid_mbox kernel panic during st driver initialization
  2008-07-31 14:15 [Bug 11194] New: megraid_mbox kernel panic during st driver initialization bugme-daemon
                   ` (4 preceding siblings ...)
  2008-07-31 23:45 ` bugme-daemon
@ 2008-08-11  1:55 ` bugme-daemon
  2008-08-15 23:46 ` bugme-daemon
  2008-09-01  5:37 ` bugme-daemon
  7 siblings, 0 replies; 11+ messages in thread
From: bugme-daemon @ 2008-08-11  1:55 UTC (permalink / raw)
  To: linux-scsi

http://bugzilla.kernel.org/show_bug.cgi?id=11194





------- Comment #3 from cshore@fionavar.ca  2008-08-10 18:55 -------
Did you receive my email to the lists?  I don't see it in Google so I'm pinging
to make sure it's not lost given the problems with it not getting to the list.


-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

^ permalink raw reply	[flat|nested] 11+ messages in thread

* [Bug 11194] megaraid_mbox kernel panic during st driver initialization
  2008-07-31 14:15 [Bug 11194] New: megraid_mbox kernel panic during st driver initialization bugme-daemon
                   ` (5 preceding siblings ...)
  2008-08-11  1:55 ` bugme-daemon
@ 2008-08-15 23:46 ` bugme-daemon
  2008-09-01  5:37 ` bugme-daemon
  7 siblings, 0 replies; 11+ messages in thread
From: bugme-daemon @ 2008-08-15 23:46 UTC (permalink / raw)
  To: linux-scsi

http://bugzilla.kernel.org/show_bug.cgi?id=11194





------- Comment #4 from cshore@fionavar.ca  2008-08-15 16:46 -------
A capture of the boot log using a serial console

[    0.000000] Initializing cgroup subsys cpuset

[    0.000000] Initializing cgroup subsys cpu

[    0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-1snapshot.11925)
(waldi@debian.org) (gcc version 4.1.3 20070718 (prerelease) (Debian
4.1.2-14+2)) #1 SMP Thu Jul 31 01:18:34 UTC 2008

[    0.000000] BIOS-provided physical RAM map:

[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)

[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)

[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)

[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fffc000 (usable)

[    0.000000]  BIOS-e820: 000000003fffc000 - 000000003ffff000 (ACPI data)

[    0.000000]  BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)

[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)

[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)

[    0.000000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)

[    0.000000] 127MB HIGHMEM available.

[    0.000000] 896MB LOWMEM available.

[    0.000000] Zone PFN ranges:

[    0.000000]   DMA             0 ->     4096

[    0.000000]   Normal       4096 ->   229376

[    0.000000]   HighMem    229376 ->   262140

[    0.000000] Movable zone start PFN for each node

[    0.000000] early_node_map[1] active PFN ranges

[    0.000000]     0:        0 ->   262140

[    0.000000] DMI 2.3 present.

[    0.000000] ACPI: RSDP 000F75E0, 0014 (r0 ASUS  )

[    0.000000] ACPI: RSDT 3FFFC000, 0030 (r1 ASUS   <P4B>    42302E31 MSFT
31313031)

[    0.000000] ACPI: FACP 3FFFC100, 0074 (r1 ASUS   <P4B>    42302E31 MSFT
31313031)

[    0.000000] ACPI: DSDT 3FFFC180, 26E6 (r1   ASUS <P4B>        1000 MSFT 
100000B)

[    0.000000] ACPI: FACS 3FFFF000, 0040

[    0.000000] ACPI: BOOT 3FFFC040, 0028 (r1 ASUS   <P4B>    42302E31 MSFT
31313031)

[    0.000000] ACPI: APIC 3FFFC080, 005A (r1 ASUS   <P4B>    42302E31 MSFT
31313031)

[    0.000000] ACPI: PM-Timer IO Port: 0xe408

[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])

[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])

[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 22 low level)

[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs

[    0.000000] Using ACPI (MADT) for SMP configuration information

[    0.000000] Allocating PCI resources starting at 50000000 (gap:
40000000:bec00000)

[    0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000

[    0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000f0000

[    0.000000] PM: Registered nosave memory: 00000000000f0000 -
0000000000100000

[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs

[    0.000000] PERCPU: Allocating 37960 bytes of per cpu data

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total
pages: 260092

[    0.000000] Kernel command line: root=/dev/mapper/Brennin-Root ro
rootdelay=10 console=ttyS0 console=tty0

[    0.000000] Enabling fast FPU save and restore... done.

[    0.000000] Enabling unmasked SIMD FPU exception support... done.

[    0.000000] Initializing CPU#0

[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)

[    0.000000] Detected 2018.014 MHz processor.

[    0.004000] Console: colour VGA+ 80x25

[    0.004000] console [tty0] enabled

[    0.004000] console [ttyS0] enabled

[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

[    0.004000] Memory: 1029040k/1048560k available (1758k kernel code, 18820k
reserved, 743k data, 244k init, 131056k highmem)

[    0.004000] virtual kernel memory layout:

[    0.004000]     fixmap  : 0xfff4c000 - 0xfffff000   ( 716 kB)

[    0.004000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)

[    0.004000]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)

[    0.004000]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)

[    0.004000]       .init : 0xc0379000 - 0xc03b6000   ( 244 kB)

[    0.004000]       .data : 0xc02b79db - 0xc0371620   ( 743 kB)

[    0.004000]       .text : 0xc0100000 - 0xc02b79db   (1758 kB)

[    0.004000] Checking if this processor honours the WP bit even in supervisor
mode...Ok.

[    0.084216] Calibrating delay using timer specific routine.. 4041.34
BogoMIPS (lpj=8082686)

[    0.096006] Security Framework initialized

[    0.100006] SELinux:  Disabled at boot.

[    0.104006] Capability LSM initialized

[    0.108006] Mount-cache hash table entries: 512

[    0.112007] Initializing cgroup subsys ns

[    0.116007] Initializing cgroup subsys cpuacct

[    0.120021] Initializing cgroup subsys devices

[    0.128008] CPU: Trace cache: 12K uops, L1 D cache: 8K

[    0.136008] CPU: L2 cache: 512K

[    0.140008] CPU: Hyper-Threading is disabled

[    0.144009] Intel machine check architecture supported.

[    0.148009] Intel machine check reporting enabled on CPU#0.

[    0.152009] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available

[    0.156009] CPU0: Thermal monitoring enabled

[    0.160010] Checking 'hlt' instruction... OK.

[    0.182583] SMP alternatives: switching to UP code

[    0.199966] Freeing SMP alternatives: 16k freed

[    0.204012] ACPI: Core revision 20080321

[    0.212013] ENABLING IO-APIC IRQs

[    0.216013] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1

[    0.259716] CPU0: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04

[    0.272017] Brought up 1 CPUs

[    0.276017] Total of 1 processors activated (4041.34 BogoMIPS).

[    0.280017] net_namespace: 660 bytes

[    0.284017] Booting paravirtualized kernel on bare hardware

[    0.288018] NET: Registered protocol family 16

[    0.292018] ACPI: bus type pci registered

[    0.298210] PCI: PCI BIOS revision 2.10 entry at 0xf11f0, last bus=4

[    0.304019] PCI: Using configuration type 1 for base access

[    0.308019] Setting up standard PCI resources

[    0.326670] ACPI: Interpreter enabled

[    0.332020] ACPI: (supports S0 S1 S4 S5)

[    0.347349] ACPI: Using IOAPIC for interrupt routing

[    0.361598] ACPI: PCI Root Bridge [PCI0] (0000:00)

[    0.368023] pci 0000:00:1f.0: Enabled i801 SMBus device

[    0.372023] pci 0000:00:1f.0: quirk: region e400-e47f claimed by ICH4
ACPI/GPIO/TCO

[    0.376023] pci 0000:00:1f.0: quirk: region ec00-ec3f claimed by ICH4 GPIO

[    0.380023] PCI: Transparent bridge - 0000:00:1e.0

[    0.386287] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14
15)

[    0.424026] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14
15)

[    0.461660] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14
15) *0, disabled.

[    0.510467] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14
15)

[    0.550340] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14
15) *0, disabled.

[    0.598465] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14
15)

[    0.639038] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14
15)

[    0.676031] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14
15)

[    0.713786] Linux Plug and Play Support v0.97 (c) Adam Belay

[    0.720031] pnp: PnP ACPI init

[    0.724031] ACPI: bus type pnp registered

[    0.734942] pnp: PnP ACPI: found 17 devices

[    0.740031] ACPI: ACPI bus type pnp unregistered

[    0.744031] PnPBIOS: Disabled by ACPI PNP

[    0.748032] PCI: Using ACPI for IRQ routing

[    0.752031] ACPI: RTC can wake from S4

[    0.756034] system 00:00: iomem range 0x0-0x9ffff could not be reserved

[    0.831266] system 00:00: iomem range 0xf0000-0xfffff could not be reserved

[    0.914659] system 00:00: iomem range 0x100000-0x3fffffff could not be
reserved

[    1.002214] system 00:00: iomem range 0xfec00000-0xfec000ff could not be
reserved

[    1.091840] system 00:00: iomem range 0xfee00000-0xfee00fff could not be
reserved

[    1.181481] system 00:02: ioport range 0xe400-0xe47f has been reserved

[    1.259665] system 00:02: ioport range 0xe800-0xe81f could not be reserved

[    1.342016] system 00:02: ioport range 0xec00-0xec3f has been reserved

[    1.420216] system 00:02: iomem range 0xfff80000-0xffffffff could not be
reserved

[    1.509841] system 00:02: iomem range 0xffb80000-0xffbfffff has been
reserved

[    1.595319] system 00:03: ioport range 0x4d0-0x4d1 has been reserved

[    1.671440] system 00:0e: ioport range 0x3f0-0x3f1 has been reserved

[    1.780153] PCI: Bridge: 0000:00:01.0

[    1.821991]   IO window: d000-dfff

[    1.862753]   MEM window: 0xdf000000-0xdfcfffff

[    1.917029]   PREFETCH window: 0x00000000e7f00000-0x00000000efffffff

[    1.993150] PCI: Bridge: 0000:03:00.0

[    2.037021]   IO window: disabled.

[    2.077787]   MEM window: 0xde900000-0xde9fffff

[    2.132061]   PREFETCH window: 0x00000000dff00000-0x00000000e7efffff

[    2.208178] PCI: Bridge: 0000:02:09.0

[    2.252054]   IO window: b000-bfff

[    2.292815]   MEM window: 0xde800000-0xdeffffff

[    2.347093]   PREFETCH window: 0x00000000dfe00000-0x00000000e7efffff

[    2.423209] PCI: Bridge: 0000:00:1e.0

[    2.467084]   IO window: a000-bfff

[    2.507847]   MEM window: 0xde800000-0xdeffffff

[    2.562125]   PREFETCH window: 0x00000000dfd00000-0x00000000e7efffff

[    2.638324] NET: Registered protocol family 2

[    2.690698] IP route cache hash table entries: 32768 (order: 5, 131072
bytes)

[    2.780148] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)

[    2.867614] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

[    2.950969] TCP: Hash tables configured (established 131072 bind 65536)

[    3.027554] TCP reno registered

[    3.065505] NET: Registered protocol family 1

[    3.117934] checking if image is initramfs... it is

[    5.804283] Freeing initrd memory: 6551k freed

[    5.804283] Simple Boot Flag at 0x3a set to 0x1

[    5.804283] audit: initializing netlink socket (disabled)

[    5.804283] type=2000 audit(1218842748.193:1): initialized

[    5.804283] highmem bounce pool size: 64 pages

[    5.804283] Total HugeTLB memory allocated, 0

[    5.804283] VFS: Disk quotas dquot_6.5.1

[    5.804283] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[    5.804283] msgmni has been set to 1767

[    5.804283] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
254)

[    5.804283] io scheduler noop registered

[    5.804283] io scheduler anticipatory registered

[    5.804283] io scheduler deadline registered

[    5.804283] io scheduler cfq registered (default)

[    5.804283] isapnp: Scanning for PnP cards...

[    5.804283] isapnp: No Plug & Play device found

[    5.804284] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled

[    5.804284] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[    5.804284] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A

[    5.804284] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[    5.804284] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A

[    5.804284] serial 0000:02:0c.0: enabling device (0000 -> 0001)

[    5.804284] ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) ->
IRQ 20

[    5.835979] 0000:02:0c.0: ttyS2 at I/O 0xa400 (irq = 20) is a 16550A

[    5.912209] brd: module loaded

[    5.948386] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64
irq 1,12

[    6.042416] serio: i8042 KBD port at 0x60,0x64 irq 1

[    6.101811] serio: i8042 AUX port at 0x60,0x64 irq 12

[    6.162531] mice: PS/2 mouse device common for all mice

[    6.224743] cpuidle: using governor ladder

[    6.275485] cpuidle: using governor menu

[    6.320577] No iBFT detected.

[    6.356754] TCP cubic registered

[    6.395368] NET: Registered protocol family 17

[    6.448565] Using IPI No-Shortcut mode

[    6.495897] registered taskstats version 1

[    6.545309] Freeing unused kernel memory: 244k freed

[    6.755503] ACPI: ACPI0007:00 is registered as cooling_device0

[    7.806895] 3c59x 0000:02:0a.0: enabling device (0004 -> 0005)

[    7.876813] ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) ->
IRQ 22

[    7.965565] 3c59x: Donald Becker and others.

[    8.017577] 0000:02:0a.0: 3Com PCI 3c905 Boomerang 100baseTx at 0001a800.

[    8.252540] SCSI subsystem initialized

[    8.299364] No dock devices found.

[    8.364258] usbcore: registered new interface driver usbfs

[    8.429991] usbcore: registered new interface driver hub

[    8.495096] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST
2006)

[    8.768116] Uniform Multi-Platform E-IDE driver

[    8.822376] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx

[    8.923235] qla1280: Skipping AMI SubSys Vendor ID Chip

[    9.014238] Floppy drive(s): fd0 is 1.44M

[    9.085637] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)

[    9.168977] megaraid: probe new device 0x101e:0x1960:0x1028:0x0493: bus
4:slot 0:func 0

[    9.266901] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 21 (level, low) ->
IRQ 21

[    9.406356] FDC 0 is a post-1991 82077

[    9.451342] usbcore: registered new device driver usb

[    9.519749] USB Universal Host Controller Interface driver v3.0

[    9.590693] ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) ->
IRQ 19

[    9.679490] uhci_hcd 0000:00:1f.2: UHCI Host Controller

[    9.743702] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus
number 1

[    9.832238] uhci_hcd 0000:00:1f.2: irq 19, io base 0x00009400

[    9.901123] usb usb1: configuration #1 chosen from 1 choice

[    9.967820] hub 1-0:1.0: USB hub found

[   10.012669] hub 1-0:1.0: 2 ports detected

[   10.084118] megaraid: fw version:[199D] bios version:[3.35]

[   10.162282] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001

[   10.243624] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1

[   10.331378] usb usb1: Product: UHCI Host Controller

[   10.389878] usb usb1: Manufacturer: Linux 2.6.26-1-686 uhci_hcd

[   10.460315] usb usb1: SerialNumber: 0000:00:1f.2

[   10.519427] ACPI: PCI Interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) ->
IRQ 23

[   10.608185] uhci_hcd 0000:00:1f.4: UHCI Host Controller

[   10.670794] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus
number 2

[   10.759371] uhci_hcd 0000:00:1f.4: irq 23, io base 0x00009000

[   10.828250] usb usb2: configuration #1 chosen from 1 choice

[   10.894954] hub 2-0:1.0: USB hub found

[   10.939798] hub 2-0:1.0: 2 ports detected

[   11.000525] scsi0 : LSI Logic MegaRAID driver

[   11.073602] scsi[0]: scanning scsi channel 0 [Phy 0] for non-raid devices

[   11.159931] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001

[   11.240086] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1

[   11.326613] usb usb2: Product: UHCI Host Controller

[   11.384956] usb usb2: Manufacturer: Linux 2.6.26-1-686 uhci_hcd

[   11.455806] usb usb2: SerialNumber: 0000:00:1f.4

[   11.515048] ICH2: IDE controller (0x8086:0x244b rev 0x05) at  PCI slot
0000:00:1f.1

[   11.606853] ICH2: not 100% native mode: will probe irqs later

[   11.675617]     ide0: BM-DMA at 0x9800-0x9807

[   11.727765]     ide1: BM-DMA at 0x9808-0x980f

[   11.840089] usb 1-1: new full speed USB device using uhci_hcd and address 2

[   12.167295] usb 1-1: configuration #1 chosen from 1 choice

[   12.248446] hub 1-1:1.0: USB hub found

[   12.314106] hub 1-1:1.0: 5 ports detected

[   12.576193] usb 1-1: New USB device found, idVendor=049f, idProduct=f511

[   12.656441] usb 1-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0

[   12.741911] hub 1-0:1.0: over-current change on port 2

[   12.916178] hda: ASUS DRW-1814BL, ATAPI CD/DVD-ROM drive

[   13.280500] usb 1-1.2: new full speed USB device using uhci_hcd and address
3

[   13.512003] usb 1-1.2: configuration #1 chosen from 1 choice

[   13.615209] usb 1-1.2: New USB device found, idVendor=058f, idProduct=6335

[   13.697595] usb 1-1.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3

[   13.785286] usb 1-1.2: Product: Mass Storage Device

[   13.843686] usb 1-1.2: Manufacturer: Generic

[   13.895367] usb 1-1.2: SerialNumber: 058F011111B1

[   13.974328] Initializing USB Mass Storage driver...

[   14.084214] hda: UDMA/66 mode selected

[   14.384896] usb 1-1.3: new full speed USB device using uhci_hcd and address
4

[   14.645846] usb 1-1.3: configuration #1 chosen from 1 choice

[   14.732596] usb 1-1.3: New USB device found, idVendor=04b8, idProduct=0005

[   14.814946] usb 1-1.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3

[   14.902797] usb 1-1.3: Product: USB Printer

[   14.954303] usb 1-1.3: Manufacturer: EPSON

[   15.003389] usb 1-1.3: SerialNumber: W60100203082324090

[   15.066832] scsi[0]: scanning scsi channel 1 [Phy 1] for non-raid devices

[   15.148410] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14

[   15.203088] ide1 at 0x170-0x177,0x376 on irq 15

[   15.344295] hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache

[   15.427378] Uniform CD-ROM driver Revision: 3.20

[   15.716642] usb 1-1.4: new full speed USB device using uhci_hcd and address
5

[   15.806142] scsi 0:1:2:0: Processor         HP       C2520A           3503
PQ: 0 ANSI: 2

[   16.040003] usb 1-1.4: configuration #1 chosen from 1 choice

[   16.171780] usb 1-1.4: New USB device found, idVendor=03f0, idProduct=3f17

[   16.254167] usb 1-1.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3

[   16.342183] usb 1-1.4: Product: HP LaserJet P1505

[   16.398476] usb 1-1.4: Manufacturer: Hewlett-Packard

[   16.458103] usb 1-1.4: SerialNumber: CA3396E

[   16.552716] scsi1 : SCSI emulation for USB Mass Storage devices

[   16.627737] usbcore: registered new interface driver usb-storage

[   16.699605] USB Mass Storage support registered.

[   16.772087] scsi 0:1:6:0: Sequential-Access SEAGATE  DAT    06408-XXX 8130
PQ: 0 ANSI: 3

[   17.980012] scsi[0]: scanning scsi channel 2 [virtual] for logical drives

[   18.986594] scsi 0:2:0:0: Direct-Access     MegaRAID LD 0 RAID5  210G 199D
PQ: 0 ANSI: 2

[   19.168224] osst :I: Tape driver with OnStream support version 0.99.4

[   19.168228] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $

[   19.325709] Driver 'osst' needs updating - please use bus_type methods

[   19.408003] scsi 0:1:2:0: Attached scsi generic sg0 type 3

[   19.473745] scsi 0:1:6:0: Attached scsi generic sg1 type 1

[   19.539381] scsi 0:2:0:0: Attached scsi generic sg2 type 0

[   19.628121] Driver 'sd' needs updating - please use bus_type methods

[   19.710133] sd 0:2:0:0: [sda] 430141440 512-byte hardware sectors (220232
MB)

[   19.814040] st: Version 20080224, fixed bufsize 32768, s/g segs 256

[   19.889138] Driver 'st' needs updating - please use bus_type methods

[   19.965493] st 0:1:6:0: Attached scsi tape st0

[   20.018721] st 0:1:6:0: st0: try direct i/o: yes (alignment 4 B)

[   20.094015] sd 0:2:0:0: [sda] Write Protect is off

[   20.153455] sd 0:2:0:0: [sda] Asking for cache data failed

[   20.219155] sd 0:2:0:0: [sda] Assuming drive cache: write through

[   20.294981] sd 0:2:0:0: [sda] 430141440 512-byte hardware sectors (220232
MB)

[   20.380048] sd 0:2:0:0: [sda] Write Protect is off

[   20.437396] sd 0:2:0:0: [sda] Asking for cache data failed

[   20.503524] sd 0:2:0:0: [sda] Assuming drive cache: write through

[   20.576451]  sda: sda1 sda2

[   20.611220] sd 0:2:0:0: [sda] Attached SCSI disk

[   21.756509] scsi 1:0:0:0: Direct-Access     SD/MMC   Card  Reader     1.00
PQ: 0 ANSI: 0

[   22.312350] sd 1:0:0:0: [sdb] 7870464 512-byte hardware sectors (4030 MB)

[   22.406709] sd 1:0:0:0: [sdb] Write Protect is off

[   22.464801] sd 1:0:0:0: [sdb] Assuming drive cache: write through

[   22.543750] sd 1:0:0:0: [sdb] 7870464 512-byte hardware sectors (4030 MB)

[   22.636717] sd 1:0:0:0: [sdb] Write Protect is off

[   22.694807] sd 1:0:0:0: [sdb] Assuming drive cache: write through

[   22.767797]  sdb: sdb1

[   22.805837] sd 1:0:0:0: [sdb] Attached SCSI removable disk

[   22.869978] sd 1:0:0:0: Attached scsi generic sg3 type 0

[   26.953605] device-mapper: uevent: version 1.0.3

[   27.011523] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised:
dm-devel@redhat.com

[   61.511864] PM: Starting manual resume from disk

[   61.612817] kjournald starting.  Commit interval 5 seconds

[   61.678603] EXT3-fs: mounted filesystem with ordered data mode.

[   63.941095] udevd version 124 started

[   64.844301] st0: Block limits 1 - 16777215 bytes.

[   64.912023] BUG: unable to handle kernel NULL pointer dereference at
00000be0

[   64.999065] IP: [<f8857209>] :megaraid_mbox:megaraid_mbox_dpc+0x178/0x44a

[   65.080515] *pde = 00000000 

[   65.115797] Oops: 0000 [#1] SMP 

[   65.118076] Modules linked in: joydev evdev ext3 jbd mbcache sha256_generic
aes_i586 aes_generic cbc dm_crypt crypto_blkcipher dm_mirror dm_log dm_snapshot
dm_mod st sd_mod sg osst ide_cd_mod cdrom ide_pci_generic usb_storage piix
uhci_hcd megaraid_mbox floppy qla1280 ide_core ata_generic libata megaraid_mm
usbcore dock scsi_mod 3c59x mii thermal processor fan thermal_sys

[   65.118076] 

[   65.118076] Pid: 1447, comm: udevd Not tainted (2.6.26-1-686 #1)

[   65.118076] EIP: 0060:[<f8857209>] EFLAGS: 00010282 CPU: 0

[   65.118076] EIP is at megaraid_mbox_dpc+0x178/0x44a [megaraid_mbox]

[   65.118076] EAX: 00000000 EBX: f7804680 ECX: c0405bd8 EDX: 00000be0

[   65.118076] ESI: 00000000 EDI: 00000000 EBP: f7460108 ESP: f7b11df4

[   65.118076]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068

[   65.118076] Process udevd (pid: 1447, ti=f7b10000 task=f74b6ca0
task.ti=f7b10000)

[   65.118076] Stack: f77c995e f7458000 f746c000 f7b11e10 f77f9880 f78a3300
f78a3300 f746010c 

[   65.118076]        f746010c f746010c f7458000 00000000 0000000a 00000000
c012689b 00000001 

[   65.118076]        c0369a68 c012644d 00000046 c036a400 00000000 00000015
c01264ff 000007e0 

[   65.118076] Call Trace:

[   65.118076]  [<c012689b>] tasklet_action+0x68/0xd0

[   65.118076]  [<c012644d>] __do_softirq+0x66/0xd3

[   65.118076]  [<c01264ff>] do_softirq+0x45/0x53

[   65.118076]  [<c01267b6>] irq_exit+0x35/0x67

[   65.118076]  [<c0105f53>] do_IRQ+0x52/0x63

[   65.118076]  [<c01042b7>] common_interrupt+0x23/0x28

[   65.118076]  [<c0162083>] do_wp_page+0x28a/0x49f

[   65.118076]  [<c0163feb>] handle_mm_fault+0x623/0x690

[   65.118076]  [<c017cd53>] sys_mkdirat+0xca/0xd4

[   65.118076]  [<c0115b07>] do_page_fault+0x29b/0x5b8

[   65.118076]  [<c0172a15>] filp_close+0x4d/0x53

[   65.118076]  [<c011586c>] do_page_fault+0x0/0x5b8

[   65.118076]  [<c02b6d3a>] error_code+0x72/0x78

[   65.118076]  [<c02b0000>] cacheinfo_cpu_callback+0x4f/0xa6

[   65.118076]  =======================

[   65.118076] Code: 0f b7 4d 24 0f b6 82 c4 33 00 00 d3 f8 a8 01 0f 84 83 00
00 00 8b 4c 24 10 8b 59 68 8b 03 83 e0 fc 74 10 e8 fb 9f 90 c7 8b 53 04 <f6> 04
10 1f 74 1c eb 65 83 3d 00 b5 85 f8 00 78 11 68 1d 09 00 

[   65.118076] EIP: [<f8857209>] megaraid_mbox_dpc+0x178/0x44a [megaraid_mbox]
SS:ESP 0068:f7b11df4

[   67.602238] Kernel panic - not syncing: Fatal exception in interrupt


-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

^ permalink raw reply	[flat|nested] 11+ messages in thread

* [Bug 11194] megaraid_mbox kernel panic during st driver initialization
  2008-07-31 14:15 [Bug 11194] New: megraid_mbox kernel panic during st driver initialization bugme-daemon
                   ` (6 preceding siblings ...)
  2008-08-15 23:46 ` bugme-daemon
@ 2008-09-01  5:37 ` bugme-daemon
  7 siblings, 0 replies; 11+ messages in thread
From: bugme-daemon @ 2008-09-01  5:37 UTC (permalink / raw)
  To: linux-scsi

http://bugzilla.kernel.org/show_bug.cgi?id=11194


cshore@fionavar.ca changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
                 CC|                            |cshore@fionavar.ca




------- Comment #5 from cshore@fionavar.ca  2008-08-31 22:37 -------
Using a second adaptor card and moving the non-RAID devices off the megaraid
controller solved the panic.  It appears the problem is the non-RAID devices
and may be related the the bug for which there is a patch for newer CERC
firmware (sorry don't have the post url, it was on this list) which deals with
an error in the way the devices are enumerated.

This controller is a Dell PERC3/DCL and has the following BIOS/firmware
revision info:

on boot screen BIOS is listed as 3.35 May 7,2004
Standard Firmware is listed as 199D

in the setup screen, it shows
PERC/CERC BIOS Configuration Utility U827

lspci -vvv gives:

04:00.0 RAID bus controller: American Megatrends Inc. MegaRAID (rev 20)
        Subsystem: Dell Device 0493
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 22
        Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
        [virtual] Expansion ROM at dff00000 [disabled] [size=64K]
        Capabilities: <access denied>
        Kernel driver in use: megaraid
        Kernel modules: megaraid_mbox


-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

^ permalink raw reply	[flat|nested] 11+ messages in thread

[parent not found: <bug-11194-11613@https.bugzilla.kernel.org/>]

* [Bug 11194] megaraid_mbox kernel panic during st driver initialization
       [not found] <bug-11194-11613@https.bugzilla.kernel.org/>
@ 2010-12-03 13:16 ` bugzilla-daemon
  2012-10-30 14:59 ` bugzilla-daemon
  1 sibling, 0 replies; 11+ messages in thread
From: bugzilla-daemon @ 2010-12-03 13:16 UTC (permalink / raw)
  To: linux-scsi

https://bugzilla.kernel.org/show_bug.cgi?id=11194


Frederic LIETART <thelinuxfr@free.fr> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
                 CC|                            |thelinuxfr@free.fr




--- Comment #6 from Frederic LIETART <thelinuxfr@free.fr>  2010-12-03 13:16:24 ---
Hi,

Similar problem wich Xserve G5 and MegaRAID Card on Debian Lenny et Squeeze.
Screenshot :
http://dl.dropbox.com/u/165177/img/IMG_0200.jpg
http://dl.dropbox.com/u/165177/img/IMG_0201.jpg
http://dl.dropbox.com/u/165177/img/IMG_0201.jpg

-- 
Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.

^ permalink raw reply	[flat|nested] 11+ messages in thread

* [Bug 11194] megaraid_mbox kernel panic during st driver initialization
       [not found] <bug-11194-11613@https.bugzilla.kernel.org/>
  2010-12-03 13:16 ` bugzilla-daemon
@ 2012-10-30 14:59 ` bugzilla-daemon
  1 sibling, 0 replies; 11+ messages in thread
From: bugzilla-daemon @ 2012-10-30 14:59 UTC (permalink / raw)
  To: linux-scsi

https://bugzilla.kernel.org/show_bug.cgi?id=11194


Alan <alan@lxorguk.ukuu.org.uk> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|NEW                         |RESOLVED
                 CC|                            |alan@lxorguk.ukuu.org.uk
         Resolution|                            |OBSOLETE




--- Comment #7 from Alan <alan@lxorguk.ukuu.org.uk>  2012-10-30 14:59:08 ---
If this is still seen on modern kernels then please re-open/update

-- 
Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.

^ permalink raw reply	[flat|nested] 11+ messages in thread

end of thread, other threads:[~2012-10-30 14:59 UTC | newest]

Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-07-31 14:15 [Bug 11194] New: megraid_mbox kernel panic during st driver initialization bugme-daemon
2008-07-31 14:15 ` [Bug 11194] " bugme-daemon
2008-07-31 14:16 ` [Bug 11194] megaraid_mbox " bugme-daemon
2008-07-31 14:18 ` bugme-daemon
2008-07-31 17:48 ` bugme-daemon
2008-07-31 23:45 ` bugme-daemon
2008-08-11  1:55 ` bugme-daemon
2008-08-15 23:46 ` bugme-daemon
2008-09-01  5:37 ` bugme-daemon
     [not found] <bug-11194-11613@https.bugzilla.kernel.org/>
2010-12-03 13:16 ` bugzilla-daemon
2012-10-30 14:59 ` bugzilla-daemon

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).