From: Robert Love <robert.w.love@intel.com>
To: james.bottomley@hansenpartnership.com
Cc: linux-scsi@vger.kernel.org
Subject: [Open-FCoE PATCH 6/6] libfc: rport retry on LS_RJT from certain ELS
Date: Wed, 21 Jan 2009 12:45:11 -0800 [thread overview]
Message-ID: <20090121204511.2468.98972.stgit@fritz> (raw)
In-Reply-To: <20090121204444.2468.66245.stgit@fritz>
From: Chris Leech <christopher.leech@intel.com>
This allows any rport ELS to retry on LS_RJT.
The rport error handling would only retry on resource allocation failures
and exchange timeouts. I have a target that will occasionally reject PLOGI
when we do a quick LOGO/PLOGI. When a critical ELS was rejected, libfc would
fail silently leaving the rport in a dead state.
The retry count and delay are managed by fc_rport_error_retry. If the retry
count is exceeded fc_rport_error will be called. When retrying is not the
correct course of action, fc_rport_error can be called directly.
Signed-off-by: Chris Leech <christopher.leech@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
---
drivers/scsi/libfc/fc_exch.c | 2 -
drivers/scsi/libfc/fc_rport.c | 111 ++++++++++++++++++++++++-----------------
include/scsi/fc/fc_fs.h | 5 ++
3 files changed, 69 insertions(+), 49 deletions(-)
diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c
index dd269e5..8c40189 100644
--- a/drivers/scsi/libfc/fc_exch.c
+++ b/drivers/scsi/libfc/fc_exch.c
@@ -32,8 +32,6 @@
#include <scsi/libfc.h>
#include <scsi/fc_encode.h>
-#define FC_DEF_R_A_TOV (10 * 1000) /* resource allocation timeout */
-
/*
* fc_exch_debug can be set in debugger or at compile time to get more logs.
*/
diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index 7175759..600a8ff 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -81,6 +81,7 @@ static void fc_rport_recv_logo_req(struct fc_rport *,
struct fc_seq *, struct fc_frame *);
static void fc_rport_timeout(struct work_struct *);
static void fc_rport_error(struct fc_rport *, struct fc_frame *);
+static void fc_rport_error_retry(struct fc_rport *, struct fc_frame *);
static void fc_rport_work(struct work_struct *);
static const char *fc_rport_state_names[] = {
@@ -410,58 +411,74 @@ static void fc_rport_timeout(struct work_struct *work)
}
/**
- * fc_rport_error - Handler for any errors
+ * fc_rport_error - Error handler, called once retries have been exhausted
* @rport: The fc_rport object
* @fp: The frame pointer
*
- * If the error was caused by a resource allocation failure
- * then wait for half a second and retry, otherwise retry
- * immediately.
- *
* Locking Note: The rport lock is expected to be held before
* calling this routine
*/
static void fc_rport_error(struct fc_rport *rport, struct fc_frame *fp)
{
struct fc_rport_libfc_priv *rdata = rport->dd_data;
- unsigned long delay = 0;
FC_DEBUG_RPORT("Error %ld in state %s, retries %d\n",
PTR_ERR(fp), fc_rport_state(rport), rdata->retries);
- if (!fp || PTR_ERR(fp) == -FC_EX_TIMEOUT) {
- /*
- * Memory allocation failure, or the exchange timed out.
- * Retry after delay
- */
- if (rdata->retries < rdata->local_port->max_retry_count) {
- rdata->retries++;
- if (!fp)
- delay = msecs_to_jiffies(500);
- get_device(&rport->dev);
- schedule_delayed_work(&rdata->retry_work, delay);
- } else {
- switch (rdata->rp_state) {
- case RPORT_ST_PLOGI:
- case RPORT_ST_PRLI:
- case RPORT_ST_LOGO:
- rdata->event = RPORT_EV_FAILED;
- queue_work(rport_event_queue,
- &rdata->event_work);
- break;
- case RPORT_ST_RTV:
- fc_rport_enter_ready(rport);
- break;
- case RPORT_ST_NONE:
- case RPORT_ST_READY:
- case RPORT_ST_INIT:
- break;
- }
- }
+ switch (rdata->rp_state) {
+ case RPORT_ST_PLOGI:
+ case RPORT_ST_PRLI:
+ case RPORT_ST_LOGO:
+ rdata->event = RPORT_EV_FAILED;
+ queue_work(rport_event_queue,
+ &rdata->event_work);
+ break;
+ case RPORT_ST_RTV:
+ fc_rport_enter_ready(rport);
+ break;
+ case RPORT_ST_NONE:
+ case RPORT_ST_READY:
+ case RPORT_ST_INIT:
+ break;
}
}
/**
+ * fc_rport_error_retry - Error handler when retries are desired
+ * @rport: The fc_rport object
+ * @fp: The frame pointer
+ *
+ * If the error was an exchange timeout retry immediately,
+ * otherwise wait for E_D_TOV.
+ *
+ * Locking Note: The rport lock is expected to be held before
+ * calling this routine
+ */
+static void fc_rport_error_retry(struct fc_rport *rport, struct fc_frame *fp)
+{
+ struct fc_rport_libfc_priv *rdata = rport->dd_data;
+ unsigned long delay = FC_DEF_E_D_TOV;
+
+ /* make sure this isn't an FC_EX_CLOSED error, never retry those */
+ if (PTR_ERR(fp) == -FC_EX_CLOSED)
+ return fc_rport_error(rport, fp);
+
+ if (rdata->retries < rdata->local_port->max_retry_count) {
+ FC_DEBUG_RPORT("Error %ld in state %s, retrying\n",
+ PTR_ERR(fp), fc_rport_state(rport));
+ rdata->retries++;
+ /* no additional delay on exchange timeouts */
+ if (PTR_ERR(fp) == -FC_EX_TIMEOUT)
+ delay = 0;
+ get_device(&rport->dev);
+ schedule_delayed_work(&rdata->retry_work, delay);
+ return;
+ }
+
+ return fc_rport_error(rport, fp);
+}
+
+/**
* fc_rport_plogi_recv_resp - Handle incoming ELS PLOGI response
* @sp: current sequence in the PLOGI exchange
* @fp: response frame
@@ -495,7 +512,7 @@ static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp,
}
if (IS_ERR(fp)) {
- fc_rport_error(rport, fp);
+ fc_rport_error_retry(rport, fp);
goto err;
}
@@ -527,7 +544,7 @@ static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp,
else
fc_rport_enter_prli(rport);
} else
- fc_rport_error(rport, fp);
+ fc_rport_error_retry(rport, fp);
out:
fc_frame_free(fp);
@@ -557,14 +574,14 @@ static void fc_rport_enter_plogi(struct fc_rport *rport)
rport->maxframe_size = FC_MIN_MAX_PAYLOAD;
fp = fc_frame_alloc(lport, sizeof(struct fc_els_flogi));
if (!fp) {
- fc_rport_error(rport, fp);
+ fc_rport_error_retry(rport, fp);
return;
}
rdata->e_d_tov = lport->e_d_tov;
if (!lport->tt.elsct_send(lport, rport, fp, ELS_PLOGI,
fc_rport_plogi_resp, rport, lport->e_d_tov))
- fc_rport_error(rport, fp);
+ fc_rport_error_retry(rport, fp);
else
get_device(&rport->dev);
}
@@ -604,7 +621,7 @@ static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp,
}
if (IS_ERR(fp)) {
- fc_rport_error(rport, fp);
+ fc_rport_error_retry(rport, fp);
goto err;
}
@@ -662,7 +679,7 @@ static void fc_rport_logo_resp(struct fc_seq *sp, struct fc_frame *fp,
rport->port_id);
if (IS_ERR(fp)) {
- fc_rport_error(rport, fp);
+ fc_rport_error_retry(rport, fp);
goto err;
}
@@ -712,13 +729,13 @@ static void fc_rport_enter_prli(struct fc_rport *rport)
fp = fc_frame_alloc(lport, sizeof(*pp));
if (!fp) {
- fc_rport_error(rport, fp);
+ fc_rport_error_retry(rport, fp);
return;
}
if (!lport->tt.elsct_send(lport, rport, fp, ELS_PRLI,
fc_rport_prli_resp, rport, lport->e_d_tov))
- fc_rport_error(rport, fp);
+ fc_rport_error_retry(rport, fp);
else
get_device(&rport->dev);
}
@@ -809,13 +826,13 @@ static void fc_rport_enter_rtv(struct fc_rport *rport)
fp = fc_frame_alloc(lport, sizeof(struct fc_els_rtv));
if (!fp) {
- fc_rport_error(rport, fp);
+ fc_rport_error_retry(rport, fp);
return;
}
if (!lport->tt.elsct_send(lport, rport, fp, ELS_RTV,
fc_rport_rtv_resp, rport, lport->e_d_tov))
- fc_rport_error(rport, fp);
+ fc_rport_error_retry(rport, fp);
else
get_device(&rport->dev);
}
@@ -840,13 +857,13 @@ static void fc_rport_enter_logo(struct fc_rport *rport)
fp = fc_frame_alloc(lport, sizeof(struct fc_els_logo));
if (!fp) {
- fc_rport_error(rport, fp);
+ fc_rport_error_retry(rport, fp);
return;
}
if (!lport->tt.elsct_send(lport, rport, fp, ELS_LOGO,
fc_rport_logo_resp, rport, lport->e_d_tov))
- fc_rport_error(rport, fp);
+ fc_rport_error_retry(rport, fp);
else
get_device(&rport->dev);
}
diff --git a/include/scsi/fc/fc_fs.h b/include/scsi/fc/fc_fs.h
index 3e4801d..1b7af3a 100644
--- a/include/scsi/fc/fc_fs.h
+++ b/include/scsi/fc/fc_fs.h
@@ -337,4 +337,9 @@ enum fc_pf_rjt_reason {
FC_RJT_VENDOR = 0xff, /* vendor specific reject */
};
+/* default timeout values */
+
+#define FC_DEF_E_D_TOV 2000UL
+#define FC_DEF_R_A_TOV 10000UL
+
#endif /* _FC_FS_H_ */
prev parent reply other threads:[~2009-01-21 20:45 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-21 20:44 [Open-FCoE PATCH 1/6] libfc: Pass lport in exch_mgr_reset Robert Love
2009-01-21 20:44 ` [Open-FCoE PATCH 2/6] libfc: when rport goes away (re-plogi), clean up exchanges to/from rport Robert Love
2009-01-21 20:44 ` [Open-FCoE PATCH 3/6] libfc: handle RRQ exch timeout Robert Love
2009-01-21 20:45 ` [Open-FCoE PATCH 4/6] libfc: fixed a soft lockup issue in fc_exch_recv_abts Robert Love
2009-01-21 20:45 ` [Open-FCoE PATCH 5/6] libfc, fcoe: fixed locking issues with lport->lp_mutex around lport->link_status Robert Love
2009-01-21 20:45 ` Robert Love [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090121204511.2468.98972.stgit@fritz \
--to=robert.w.love@intel.com \
--cc=james.bottomley@hansenpartnership.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox