From: Dave Holland <dh3@sanger.ac.uk>
To: device-mapper development <dm-devel@redhat.com>
Cc: linux-scsi@vger.kernel.org
Subject: Re: RE: qla2xxx 0000:03:0c.0: Firmware image unavailable
Date: Thu, 22 Jan 2009 16:46:17 +0000 [thread overview]
Message-ID: <20090122164616.GF19147@sanger.ac.uk> (raw)
In-Reply-To: <E463DF2B2E584B4A82673F53D62C2EF45CEAB586@cosmail01.lsi.com>
On Thu, Jan 22, 2009 at 08:20:48AM -0700, Moger, Babu wrote:
> You are right. Looks like qlogic driver loads even before udev hotplug
> is functional. Driver loads successfully when I re-load the driver
> after the system in up. Is there any solution or work-around for this
> problem?
So the problem only happens at boot time? Are you using an initrd, and
if so, have you got the firmware images in the initrd image?
(mkinitramfs, update-initramfs, etc)
Dave
--
** Dave Holland ** Systems Support -- Infrastructure Management **
** 01223 496923 ** The Sanger Institute, Hinxton, Cambridge, UK **
"Your bumper is my crumple zone."
--
The Wellcome Trust Sanger Institute is operated by Genome Research
Limited, a charity registered in England with number 1021457 and a
company registered in England with number 2742969, whose registered
office is 215 Euston Road, London, NW1 2BE.
next prev parent reply other threads:[~2009-01-22 16:46 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-06 4:05 [PATCH] Make sure the state of a path is set properly when controller is swapped from passive to active Chandra Seetharaman
2008-11-10 23:17 ` [PATCH] scsi_dh: Adding LSI vendor and product ids in rdac device list Moger, Babu
2008-11-24 0:04 ` James Bottomley
2008-11-24 15:06 ` Moger, Babu
2008-11-11 0:45 ` DM does not activate the paths if there are more than one path in path group during failover Moger, Babu
2008-11-11 0:59 ` Alasdair G Kergon
2008-11-11 17:13 ` Moger, Babu
2008-11-11 21:00 ` Chandra Seetharaman
2008-11-13 23:48 ` [RFC][PATCH] Handle multipath paths in a path group properly during pg_init (was "RE: [dm-devel] DM does not activate the paths if there are more than one path in path group during failover") Chandra Seetharaman
2008-11-14 0:12 ` [RFC][PATCH] Handle multipath paths in a path group properly during pg_init (was "RE: " Alasdair G Kergon
2008-11-14 19:08 ` [RFC][PATCH] Handle multipath paths in a path group properly during pg_init (was "RE: [dm-devel] " Chandra Seetharaman
2008-11-14 19:34 ` [RFC][PATCH] Handle multipath paths in a path group properly during pg_init (was "RE: " Alasdair G Kergon
2008-11-14 20:24 ` [RFC][PATCH] Handle multipath paths in a path group properly during pg_init (was "RE: [dm-devel] " Chandra Seetharaman
2008-11-11 2:06 ` DM does not activate the paths if there are more than one path in path group during failover Chandra Seetharaman
2008-11-11 17:07 ` Moger, Babu
2008-11-11 17:10 ` Chandra Seetharaman
2008-11-11 17:28 ` Moger, Babu
2009-01-22 0:00 ` qla2xxx 0000:03:0c.0: Firmware image unavailable Moger, Babu
2009-01-22 0:26 ` Seokmann Ju
2009-01-22 14:14 ` Moger, Babu
2009-01-22 14:39 ` Sudhakar Pannerselvam
2009-01-22 15:20 ` Moger, Babu
2009-01-22 16:46 ` Dave Holland [this message]
2009-01-23 0:15 ` [dm-devel] " Moger, Babu
2009-01-23 6:22 ` Sudhakar Pannerselvam
2009-01-23 15:04 ` James Bottomley
2009-01-25 4:22 ` Mike Snitzer
2009-01-22 14:56 ` James Bottomley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090122164616.GF19147@sanger.ac.uk \
--to=dh3@sanger.ac.uk \
--cc=dm-devel@redhat.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox