From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dave Holland Subject: Re: RE: qla2xxx 0000:03:0c.0: Firmware image unavailable Date: Thu, 22 Jan 2009 16:46:17 +0000 Message-ID: <20090122164616.GF19147@sanger.ac.uk> References: Reply-To: device-mapper development Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: dm-devel-bounces@redhat.com Errors-To: dm-devel-bounces@redhat.com To: device-mapper development Cc: linux-scsi@vger.kernel.org List-Id: linux-scsi@vger.kernel.org On Thu, Jan 22, 2009 at 08:20:48AM -0700, Moger, Babu wrote: > You are right. Looks like qlogic driver loads even before udev hotplug > is functional. Driver loads successfully when I re-load the driver > after the system in up. Is there any solution or work-around for this > problem? So the problem only happens at boot time? Are you using an initrd, and if so, have you got the firmware images in the initrd image? (mkinitramfs, update-initramfs, etc) Dave -- ** Dave Holland ** Systems Support -- Infrastructure Management ** ** 01223 496923 ** The Sanger Institute, Hinxton, Cambridge, UK ** "Your bumper is my crumple zone." -- The Wellcome Trust Sanger Institute is operated by Genome Research Limited, a charity registered in England with number 1021457 and a company registered in England with number 2742969, whose registered office is 215 Euston Road, London, NW1 2BE.