From: Vasu Dev <vasu.dev@intel.com>
To: linux-scsi@vger.kernel.org
Subject: [PATCH 1/5] fcoe: Add a header file defining the FIP protocol for FCoE.
Date: Wed, 04 Mar 2009 10:53:41 -0800 [thread overview]
Message-ID: <20090304185341.22010.84310.stgit@vi2.jf.intel.com> (raw)
In-Reply-To: <20090304185025.22010.45242.stgit@vi2.jf.intel.com>
From: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Vasu Dev <vasu.dev@intel.com>
---
include/scsi/fc/fc_fip.h | 237 ++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 237 insertions(+), 0 deletions(-)
create mode 100644 include/scsi/fc/fc_fip.h
diff --git a/include/scsi/fc/fc_fip.h b/include/scsi/fc/fc_fip.h
new file mode 100644
index 0000000..dabf5a7
--- /dev/null
+++ b/include/scsi/fc/fc_fip.h
@@ -0,0 +1,237 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _FC_FIP_H_
+#define _FC_FIP_H_
+
+/*
+ * This version is based on:
+ * http://www.t11.org/ftp/t11/pub/fc/bb-5/08-543v1.pdf
+ */
+
+/*
+ * The FIP ethertype eventually goes in net/if_ether.h.
+ */
+#ifndef ETH_P_FIP
+#define ETH_P_FIP 0x8914 /* FIP Ethertype */
+#endif
+
+#define FIP_DEF_PRI 128 /* default selection priority */
+#define FIP_DEF_FC_MAP 0x0efc00 /* default FCoE MAP (MAC OUI) value */
+#define FIP_DEF_FKA 8000 /* default FCF keep-alive/advert period (mS) */
+#define FIP_VN_KA_PERIOD 90000 /* required VN_port keep-alive period (mS) */
+#define FIP_FCF_FUZZ 100 /* random time added by FCF (mS) */
+
+/*
+ * Multicast MAC addresses. T11-adopted.
+ */
+#define FIP_ALL_FCOE_MACS ((u8[6]) { 1, 0x10, 0x18, 1, 0, 0 })
+#define FIP_ALL_ENODE_MACS ((u8[6]) { 1, 0x10, 0x18, 1, 0, 1 })
+#define FIP_ALL_FCF_MACS ((u8[6]) { 1, 0x10, 0x18, 1, 0, 2 })
+
+#define FIP_VER 1 /* version for fip_header */
+
+struct fip_header {
+ __u8 fip_ver; /* upper 4 bits are the version */
+ __u8 fip_resv1; /* reserved */
+ __be16 fip_op; /* operation code */
+ __u8 fip_resv2; /* reserved */
+ __u8 fip_subcode; /* lower 4 bits are sub-code */
+ __be16 fip_dl_len; /* length of descriptors in words */
+ __be16 fip_flags; /* header flags */
+} __attribute__((packed));
+
+#define FIP_VER_SHIFT 4
+#define FIP_VER_ENCAPS(v) ((v) << FIP_VER_SHIFT)
+#define FIP_VER_DECAPS(v) ((v) >> FIP_VER_SHIFT)
+#define FIP_BPW 4 /* bytes per word for lengths */
+
+/*
+ * fip_op.
+ */
+enum fip_opcode {
+ FIP_OP_DISC = 1, /* discovery, advertisement, etc. */
+ FIP_OP_LS = 2, /* Link Service request or reply */
+ FIP_OP_CTRL = 3, /* Keep Alive / Link Reset */
+ FIP_OP_VLAN = 4, /* VLAN discovery */
+ FIP_OP_VENDOR_MIN = 0xfff8, /* min vendor-specific opcode */
+ FIP_OP_VENDOR_MAX = 0xfffe, /* max vendor-specific opcode */
+};
+
+/*
+ * Subcodes for FIP_OP_DISC.
+ */
+enum fip_disc_subcode {
+ FIP_SC_SOL = 1, /* solicitation */
+ FIP_SC_ADV = 2, /* advertisement */
+};
+
+/*
+ * Subcodes for FIP_OP_LS.
+ */
+enum fip_trans_subcode {
+ FIP_SC_REQ = 1, /* request */
+ FIP_SC_REP = 2, /* reply */
+};
+
+/*
+ * Subcodes for FIP_OP_RESET.
+ */
+enum fip_reset_subcode {
+ FIP_SC_KEEP_ALIVE = 1, /* keep-alive from VN_Port */
+ FIP_SC_CLR_VLINK = 2, /* clear virtual link from VF_Port */
+};
+
+/*
+ * Subcodes for FIP_OP_VLAN.
+ */
+enum fip_vlan_subcode {
+ FIP_SC_VL_REQ = 1, /* request */
+ FIP_SC_VL_REP = 2, /* reply */
+};
+
+/*
+ * flags in header fip_flags.
+ */
+enum fip_flag {
+ FIP_FL_FPMA = 0x8000, /* supports FPMA fabric-provided MACs */
+ FIP_FL_SPMA = 0x4000, /* supports SPMA server-provided MACs */
+ FIP_FL_AVAIL = 0x0004, /* available for FLOGI/ELP */
+ FIP_FL_SOL = 0x0002, /* this is a solicited message */
+ FIP_FL_FPORT = 0x0001, /* sent from an F port */
+};
+
+/*
+ * Common descriptor header format.
+ */
+struct fip_desc {
+ __u8 fip_dtype; /* type - see below */
+ __u8 fip_dlen; /* length - in 32-bit words */
+};
+
+enum fip_desc_type {
+ FIP_DT_PRI = 1, /* priority for forwarder selection */
+ FIP_DT_MAC = 2, /* MAC address */
+ FIP_DT_MAP_OUI = 3, /* FC-MAP OUI */
+ FIP_DT_NAME = 4, /* switch name or node name */
+ FIP_DT_FAB = 5, /* fabric descriptor */
+ FIP_DT_FCOE_SIZE = 6, /* max FCoE frame size */
+ FIP_DT_FLOGI = 7, /* FLOGI request or response */
+ FIP_DT_FDISC = 8, /* FDISC request or response */
+ FIP_DT_LOGO = 9, /* LOGO request or response */
+ FIP_DT_ELP = 10, /* ELP request or response */
+ FIP_DT_VN_ID = 11, /* VN_Node Identifier */
+ FIP_DT_FKA = 12, /* advertisement keep-alive period */
+ FIP_DT_VENDOR = 13, /* vendor ID */
+ FIP_DT_VLAN = 14, /* vlan number */
+ FIP_DT_LIMIT, /* max defined desc_type + 1 */
+ FIP_DT_VENDOR_BASE = 128, /* first vendor-specific desc_type */
+};
+
+/*
+ * FIP_DT_PRI - priority descriptor.
+ */
+struct fip_pri_desc {
+ struct fip_desc fd_desc;
+ __u8 fd_resvd;
+ __u8 fd_pri; /* FCF priority: higher is better */
+} __attribute__((packed));
+
+/*
+ * FIP_DT_MAC - MAC address descriptor.
+ */
+struct fip_mac_desc {
+ struct fip_desc fd_desc;
+ __u8 fd_mac[ETH_ALEN];
+} __attribute__((packed));
+
+/*
+ * FIP_DT_MAP - descriptor.
+ */
+struct fip_map_desc {
+ struct fip_desc fd_desc;
+ __u8 fd_resvd[3];
+ __u8 fd_map[3];
+} __attribute__((packed));
+
+/*
+ * FIP_DT_NAME descriptor.
+ */
+struct fip_wwn_desc {
+ struct fip_desc fd_desc;
+ __u8 fd_resvd[2];
+ __be32 fd_wwn[2]; /* 64-bit value, only 32-bit aligned */
+} __attribute__((packed));
+
+/*
+ * FIP_DT_FAB descriptor.
+ */
+struct fip_fab_desc {
+ struct fip_desc fd_desc;
+ __be16 fd_vfid; /* virtual fabric ID */
+ __u8 fd_resvd;
+ __u8 fd_map[3]; /* FC-MAP value */
+ __be32 fd_wwn[2]; /* fabric name */
+} __attribute__((packed));
+
+/*
+ * FIP_DT_FCOE_SIZE descriptor.
+ */
+struct fip_size_desc {
+ struct fip_desc fd_desc;
+ __be16 fd_size;
+} __attribute__((packed));
+
+/*
+ * Descriptor that encapsulates an ELS or ILS frame.
+ * The encapsulated frame immediately follows this header, without
+ * SOF, EOF, or CRC.
+ */
+struct fip_encaps {
+ struct fip_desc fd_desc;
+ __u8 fd_resvd[2];
+} __attribute__((packed));
+
+/*
+ * FIP_DT_VN_ID - VN_Node Identifier descriptor.
+ */
+struct fip_vn_desc {
+ struct fip_desc fd_desc;
+ __u8 fd_mac[ETH_ALEN];
+ __u8 fd_resvd;
+ __u8 fd_fc_id[3];
+ __be32 fd_wwpn[2];
+} __attribute__((packed));
+
+/*
+ * FIP_DT_FKA - Advertisement keep-alive period.
+ */
+struct fip_fka_desc {
+ struct fip_desc fd_desc;
+ __u8 fd_resvd[2];
+ __be32 fd_fka_period; /* adv./keep-alive period in mS */
+} __attribute__((packed));
+
+/*
+ * FIP_DT_VENDOR descriptor.
+ */
+struct fip_vendor_desc {
+ struct fip_desc fd_desc;
+ __u8 fd_resvd[2];
+ __u8 fd_vendor_id[8];
+} __attribute__((packed));
+
+#endif /* _FC_FIP_H_ */
next prev parent reply other threads:[~2009-03-04 18:53 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-04 18:53 [PATCH 0/5] FIP feature for 2.6.30 merge window Vasu Dev
2009-03-04 18:53 ` Vasu Dev [this message]
2009-03-04 18:53 ` [PATCH 2/5] fcoe: Add support for the FIP discovery and keep-alive protocol Vasu Dev
2009-03-04 18:53 ` [PATCH 3/5] fcoe: libfcoe: fix FIP link logic Vasu Dev
2009-03-04 18:53 ` [PATCH 4/5] fcoe: removed kzalloc from fcoe_ctlr_parse_adv (v3) Vasu Dev
2009-03-04 18:54 ` [PATCH 5/5] fcoe: removes sharing of fcoe_rx_list for both FCoE and FIP frames Vasu Dev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090304185341.22010.84310.stgit@vi2.jf.intel.com \
--to=vasu.dev@intel.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox