From: Jens Axboe <jens.axboe@oracle.com>
To: Jeff Garzik <jeff@garzik.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>,
linux-kernel@vger.kernel.org, linux-scsi@vger.kernel.org,
Eric.Moore@lsi.com
Subject: Re: [PATCH 1/3] block: add blk-iopoll, a NAPI like approach for block devices
Date: Fri, 7 Aug 2009 13:31:47 +0200 [thread overview]
Message-ID: <20090807113146.GX12579@kernel.dk> (raw)
In-Reply-To: <20090807110517.GW12579@kernel.dk>
On Fri, Aug 07 2009, Jens Axboe wrote:
> On Fri, Aug 07 2009, Jens Axboe wrote:
> > > I'm not NAK'ing... just inserting some relevant NAPI field experience,
> > > and hoping for some numbers that better measure the costs/benefits.
> >
> > Appreciate you looking over this, and I'll certainly be posting some
> > more numbers on this. It'll largely depend on both storage, controller,
> > and worload.
>
> Here's a quick set of numbers, beating with random reads on a drive.
> Average of three runs for each, stddev is very low so confidence in the
> numbers should be high.
>
> With iopoll=0 (disabled), stock:
>
> blocksize IOPS ints/sec usr sys
> ------------------------------------------------------
> 4k 48401 ~30500 3.36% 27.26%
>
> clat (usec): min=1052, max=21615, avg=10541.48, stdev=243.48
> clat (usec): min=1066, max=22040, avg=10543.69, stdev=242.05
> clat (usec): min=1057, max=23237, avg=10529.04, stdev=239.30
>
>
> With iopoll=1
>
> blocksize IOPS ints/sec usr sys
> ------------------------------------------------------
> 4k 48452 ~29000 3.37% 26.47%
>
>
> clat (usec): min=1178, max=21662, avg=10542.72, stdev=247.87
> clat (usec): min=1074, max=21783, avg=10534.14, stdev=240.54
> clat (usec): min=1102, max=22123, avg=10509.42, stdev=225.73
Lets raise the bar a bit, this time using 8k reads on the faster box.
iopoll=0
blocksize IOPS ints/sec usr sys
------------------------------------------------------
8k 64050 ~76000 4.12% 45.01%
clat (usec): min=1326, max=18994, avg=7967.54, stdev=214.12
clat (usec): min=1325, max=25404, avg=7968.06, stdev=239.87
clat (usec): min=1273, max=21414, avg=7963.43, stdev=231.27
iopoll=1
blocksize IOPS ints/sec usr sys
------------------------------------------------------
8k 64162 ~55000 4.07% 42.32%
clat (usec): min=1380, max=19681, avg=7960.31, stdev=197.41
clat (usec): min=1370, max=37508, avg=7954.61, stdev=210.35
clat (usec): min=1332, max=23383, avg=7947.99, stdev=209.60
Again, purely a synthetic IO benchmark, but the sys reduction is
interesting.
--
Jens Axboe
next prev parent reply other threads:[~2009-08-07 11:31 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-06 19:58 [PATCH 0/3]: blk-iopoll, a polled completion API for block devices Jens Axboe
2009-08-06 19:58 ` [PATCH 1/3] block: add blk-iopoll, a NAPI like approach " Jens Axboe
2009-08-06 21:32 ` Alan Cox
2009-08-07 6:37 ` Jens Axboe
2009-08-07 8:38 ` Jeff Garzik
2009-08-07 8:50 ` Jens Axboe
2009-08-07 11:05 ` Jens Axboe
2009-08-07 11:31 ` Jens Axboe [this message]
2009-08-19 19:08 ` Jens Axboe
2009-08-20 11:30 ` [PATCH 1/3] block: add blk-iopoll, a NAPI like approach forblock devices jack wang
2009-08-20 11:38 ` Jens Axboe
2009-08-06 19:58 ` [PATCH 2/3] libata: add support for blk-iopoll Jens Axboe
2009-08-10 17:15 ` Jonathan Corbet
2009-08-10 17:22 ` Jens Axboe
2009-08-06 19:58 ` [PATCH 3/3] mptfusion: " Jens Axboe
2009-08-11 10:35 ` [PATCH 0/3]: blk-iopoll, a polled completion API for block devices Bart Van Assche
2009-08-11 14:39 ` Jens Axboe
2009-08-11 14:59 ` Bart Van Assche
2009-08-11 17:14 ` Jens Axboe
2009-08-11 18:37 ` Bart Van Assche
2009-08-11 18:41 ` Jens Axboe
2009-08-11 18:49 ` Bart Van Assche
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090807113146.GX12579@kernel.dk \
--to=jens.axboe@oracle.com \
--cc=Eric.Moore@lsi.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=jeff@garzik.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).