[PATCH] usb: fix paths in usbmon documentation

["Rogério Brito" <rbrito@ime.usp.br>]

Hi there.

On Aug 21 2009, Alan Stern wrote:
> On Thu, 20 Aug 2009, Rogério Brito wrote:
> > Again, just reiterating, what I said before, even though I am not sure
> > if I can reproduce it, I will try to.
> 
> A usbmon trace showing what happens when you plug in the drive and 
> when you run smartctl would help.

The documentation for usbmon in the kernel 2.6.31-rc7 kernel doesn't
match what the kernel exposes in the debug fs tree. This patch fixes it.

Signed-off-by: Rogério Brito <rbrito@ime.usp.br>

---

diff --git a/Documentation/usb/usbmon.txt b/Documentation/usb/usbmon.txt
index 6c3c625..ea05cf7 100644
--- a/Documentation/usb/usbmon.txt
+++ b/Documentation/usb/usbmon.txt
@@ -33,7 +33,7 @@ if usbmon is built into the kernel.
 
 Verify that bus sockets are present.
 
-# ls /sys/kernel/debug/usbmon
+# ls /sys/kernel/debug/usb/usbmon
 0s  0u  1s  1t  1u  2s  2t  2u  3s  3t  3u  4s  4t  4u
 #
 
@@ -58,11 +58,11 @@ Bus=03 means it's bus 3.
 
 3. Start 'cat'
 
-# cat /sys/kernel/debug/usbmon/3u > /tmp/1.mon.out
+# cat /sys/kernel/debug/usb/usbmon/3u > /tmp/1.mon.out
 
 to listen on a single bus, otherwise, to listen on all buses, type:
 
-# cat /sys/kernel/debug/usbmon/0u > /tmp/1.mon.out
+# cat /sys/kernel/debug/usb/usbmon/0u > /tmp/1.mon.out
 
 This process will be reading until killed. Naturally, the output can be
 redirected to a desirable location. This is preferred, because it is going


-- 
Rogério Brito : rbrito@{mackenzie,ime.usp}.br : GPG key 1024D/7C2CAEB8
http://www.ime.usp.br/~rbrito : http://meusite.mackenzie.com.br/rbrito
Projects: algorithms.berlios.de : lame.sf.net : vrms.alioth.debian.org
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html