From: Robert Love <robert.w.love@intel.com>
To: James.Bottomley@HansenPartnership.com, linux-scsi@vger.kernel.org
Cc: Joe Eykholt <jeykholt@cisco.com>, Robert Love <robert.w.love@intel.com>
Subject: [PATCH 33/54] libfcoe: FIP should report link to libfc whether selected or not
Date: Tue, 03 Nov 2009 11:48:27 -0800 [thread overview]
Message-ID: <20091103194827.4085.3666.stgit@localhost.localdomain> (raw)
In-Reply-To: <20091103194530.4085.37963.stgit@localhost.localdomain>
From: Joe Eykholt <jeykholt@cisco.com>
The fnic driver with FIP is reporting link up, even though it's down.
When the interface is shut down by the switch, we receive a clear
virtual link, and set the state reported to libfc as down, although
we still report it up. Clearly wrong. That causes the subsequent
link down event not to be reported, and /sys shows the host "Online".
Currently, in FIP mode, if an FCF times out, then link to libfc
is reported as down, to stop FLOGIs. That interferes with the LLD
link down being reported.
Users really need to know the physical link information, to diagnose
cabling issues, so physical link status should be reported to libfc.
If the selected FCF needs to be reported, that should be done
separately, in a later patch.
Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
---
drivers/scsi/fcoe/libfcoe.c | 60 ++++++++++++++++++++++---------------------
include/scsi/libfcoe.h | 1 +
2 files changed, 31 insertions(+), 30 deletions(-)
diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c
index 787e722..4d857c2 100644
--- a/drivers/scsi/fcoe/libfcoe.c
+++ b/drivers/scsi/fcoe/libfcoe.c
@@ -277,38 +277,16 @@ EXPORT_SYMBOL(fcoe_ctlr_link_up);
/**
* fcoe_ctlr_reset() - Reset a FCoE controller
* @fip: The FCoE controller to reset
- * @new_state: The FIP state to be entered
- *
- * Returns non-zero if the link was up and now isn't.
*/
-static int fcoe_ctlr_reset(struct fcoe_ctlr *fip, enum fip_state new_state)
+static void fcoe_ctlr_reset(struct fcoe_ctlr *fip)
{
- struct fc_lport *lport = fip->lp;
- int link_dropped;
-
- spin_lock_bh(&fip->lock);
fcoe_ctlr_reset_fcfs(fip);
del_timer(&fip->timer);
- fip->state = new_state;
fip->ctlr_ka_time = 0;
fip->port_ka_time = 0;
fip->sol_time = 0;
fip->flogi_oxid = FC_XID_UNKNOWN;
fip->map_dest = 0;
- fip->last_link = 0;
- link_dropped = fip->link;
- fip->link = 0;
- spin_unlock_bh(&fip->lock);
-
- if (link_dropped)
- fc_linkdown(lport);
-
- if (new_state == FIP_ST_ENABLED) {
- fcoe_ctlr_solicit(fip, NULL);
- fc_linkup(lport);
- link_dropped = 0;
- }
- return link_dropped;
}
/**
@@ -322,7 +300,20 @@ static int fcoe_ctlr_reset(struct fcoe_ctlr *fip, enum fip_state new_state)
*/
int fcoe_ctlr_link_down(struct fcoe_ctlr *fip)
{
- return fcoe_ctlr_reset(fip, FIP_ST_LINK_WAIT);
+ int link_dropped;
+
+ LIBFCOE_FIP_DBG(fip, "link down.\n");
+ spin_lock_bh(&fip->lock);
+ fcoe_ctlr_reset(fip);
+ link_dropped = fip->link;
+ fip->link = 0;
+ fip->last_link = 0;
+ fip->state = FIP_ST_LINK_WAIT;
+ spin_unlock_bh(&fip->lock);
+
+ if (link_dropped)
+ fc_linkdown(fip->lp);
+ return link_dropped;
}
EXPORT_SYMBOL(fcoe_ctlr_link_down);
@@ -994,7 +985,13 @@ static void fcoe_ctlr_recv_clr_vlink(struct fcoe_ctlr *fip,
desc_mask);
} else {
LIBFCOE_FIP_DBG(fip, "performing Clear Virtual Link\n");
- fcoe_ctlr_reset(fip, FIP_ST_ENABLED);
+
+ spin_lock_bh(&fip->lock);
+ fcoe_ctlr_reset(fip);
+ spin_unlock_bh(&fip->lock);
+
+ fc_lport_reset(fip->lp);
+ fcoe_ctlr_solicit(fip, NULL);
}
}
@@ -1152,15 +1149,14 @@ static void fcoe_ctlr_timeout(unsigned long arg)
fip->port_ka_time = jiffies +
msecs_to_jiffies(FIP_VN_KA_PERIOD);
fip->ctlr_ka_time = jiffies + sel->fka_period;
- fip->link = 1;
} else {
printk(KERN_NOTICE "libfcoe: host%d: "
"FIP Fibre-Channel Forwarder timed out. "
"Starting FCF discovery.\n",
fip->lp->host->host_no);
- fip->link = 0;
+ fip->reset_req = 1;
+ schedule_work(&fip->link_work);
}
- schedule_work(&fip->link_work);
}
if (sel) {
@@ -1205,20 +1201,24 @@ static void fcoe_ctlr_link_work(struct work_struct *work)
u8 *mac;
int link;
int last_link;
+ int reset;
fip = container_of(work, struct fcoe_ctlr, link_work);
spin_lock_bh(&fip->lock);
last_link = fip->last_link;
link = fip->link;
fip->last_link = link;
+ reset = fip->reset_req;
+ fip->reset_req = 0;
spin_unlock_bh(&fip->lock);
if (last_link != link) {
if (link)
fc_linkup(fip->lp);
else
- fcoe_ctlr_reset(fip, FIP_ST_LINK_WAIT);
- }
+ fc_linkdown(fip->lp);
+ } else if (reset && link)
+ fc_lport_reset(fip->lp);
if (fip->send_ctlr_ka) {
fip->send_ctlr_ka = 0;
diff --git a/include/scsi/libfcoe.h b/include/scsi/libfcoe.h
index 2344a00..e38ffa0 100644
--- a/include/scsi/libfcoe.h
+++ b/include/scsi/libfcoe.h
@@ -108,6 +108,7 @@ struct fcoe_ctlr {
u8 flogi_count;
u8 link;
u8 last_link;
+ u8 reset_req;
u8 map_dest;
u8 spma;
u8 send_ctlr_ka;
next prev parent reply other threads:[~2009-11-03 19:48 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-03 19:45 [PATCH 00/54] libfc, libfcoe, fcoe and fnic updates for 2.6.33 Robert Love
2009-11-03 19:45 ` [PATCH 01/54] fnic: Allocate OS interrupt resources just before enabling interrupts Robert Love
2009-11-03 19:45 ` [PATCH 02/54] fcoe: Increase FCOE_MAX_LUN to 0xFFFF (65535) Robert Love
2009-11-03 19:45 ` [PATCH 03/54] libfc: Move non-common routines and prototypes out of libfc.h Robert Love
2009-11-03 19:45 ` [PATCH 04/54] libfc: Remove fc_fcp_complete Robert Love
2009-11-03 19:45 ` [PATCH 05/54] libfc: Add libfc/fc_libfc.[ch] for libfc internal routines Robert Love
2009-11-03 19:46 ` [PATCH 06/54] libfc: Move libfc_init and libfc_exit to fc_libfc.c Robert Love
2009-11-03 19:46 ` [PATCH 07/54] libfc: changes to libfc_host_alloc to consolidate initialization with allocation Robert Love
2009-11-03 19:46 ` [PATCH 08/54] libfc: add some generic NPIV support routines to libfc Robert Love
2009-11-03 19:46 ` [PATCH 09/54] libfc: vport link handling and fc_vport state managment Robert Love
2009-11-03 19:46 ` [PATCH 10/54] libfc, libfcoe: FDISC ELS for NPIV Robert Love
2009-11-03 19:46 ` [PATCH 11/54] libfcoe, fcoe: libfcoe NPIV support Robert Love
2009-11-03 19:46 ` [PATCH 12/54] fcoe: add a separate scsi transport template for NPIV vports Robert Love
2009-11-03 19:46 ` [PATCH 13/54] fcoe: NPIV vport create/destroy Robert Love
2009-11-03 19:46 ` [PATCH 14/54] libfc: RPN_ID is obsolete and unnecessary Robert Love
2009-11-03 19:46 ` [PATCH 15/54] libfc: RNN_ID may be required before RSNN_NN with some switches Robert Love
2009-11-03 19:46 ` [PATCH 16/54] libfc: Register Symbolic Node Name (RSNN_NN) Robert Love
2009-11-03 19:47 ` [PATCH 17/54] libfc: Register Symbolic Port Name (RSPN_ID) Robert Love
2009-11-03 19:47 ` [PATCH 18/54] libfc: combine name server registration response handlers Robert Love
2009-11-03 19:47 ` [PATCH 19/54] libfc: combine name server registration request functions Robert Love
2009-11-03 19:47 ` [PATCH 20/54] fcoe: vport symbolic name support Robert Love
2009-11-03 19:47 ` [PATCH 21/54] libfc: Export FC headers Robert Love
2009-11-03 19:47 ` [PATCH 22/54] libfc: Add routine to copy data from a buffer to a SG list Robert Love
2009-11-03 19:47 ` [PATCH 23/54] libfc, fcoe: Add FC passthrough support Robert Love
2009-11-03 19:47 ` [PATCH 24/54] libfc: Formatting cleanups across libfc Robert Love
2009-11-03 19:47 ` [PATCH 25/54] libfcoe: formatting and comment cleanups Robert Love
2009-11-03 19:47 ` [PATCH 26/54] fcoe: Formatting cleanups and commenting Robert Love
2009-11-03 19:47 ` [PATCH 27/54] fcoe, libfc: use single frame allocation API Robert Love
2009-11-03 19:48 ` [PATCH 28/54] libfc: reduce can_queue for all FCP frame allocation failures Robert Love
2009-11-03 19:48 ` [PATCH 29/54] libfc: adds can_queue ramp up Robert Love
2009-11-03 19:48 ` [PATCH 30/54] libfcoe: Allow FIP to be disabled by the driver Robert Love
2009-11-03 19:48 ` [PATCH 31/54] libfcoe: fip: use SCSI host number to identify debug messages Robert Love
2009-11-03 19:48 ` [PATCH 32/54] libfcoe: fip: allow FIP receive to be called from IRQ Robert Love
2009-11-03 19:48 ` Robert Love [this message]
2009-11-03 19:48 ` [PATCH 34/54] libfcoe: don't send ELS in FIP mode if no FCF selected Robert Love
2009-11-03 19:48 ` [PATCH 35/54] fcoe: remove extra function decalrations Robert Love
2009-11-03 19:48 ` [PATCH 36/54] fcoe: add check to fail gracefully in bonding mode Robert Love
2009-11-03 19:48 ` [PATCH 37/54] libfc: fix RNN_ID smashing skb payload Robert Love
2009-11-03 19:48 ` [PATCH 38/54] libfc: fix symbolic name registrations smashing skb data Robert Love
2009-11-03 19:49 ` [PATCH 39/54] libfc: fix fc_els_resp_type to correct display of CT responses Robert Love
2009-11-03 19:49 ` [PATCH 40/54] libfc: add set_fid function to libfc template Robert Love
2009-11-03 19:49 ` [PATCH 41/54] libfc: add host number to lport link up/down messages Robert Love
2009-11-03 19:49 ` [PATCH 42/54] libfcoe: fcoe: simplify receive FLOGI response Robert Love
2009-11-03 19:49 ` [PATCH 43/54] fnic: Add FIP support to the fnic driver Robert Love
2009-11-03 19:49 ` [PATCH 44/54] libfc: register FC4 features with the FC switch Robert Love
2009-11-03 19:49 ` [PATCH 45/54] fnic: enable bsg pass-thru for fcping Robert Love
2009-11-03 19:49 ` [PATCH 46/54] fcoe: Fix checking san mac address Robert Love
2009-11-03 19:49 ` [PATCH 47/54] fcoe: Fix getting san mac for VLAN interface Robert Love
2009-11-03 19:49 ` [PATCH 48/54] fcoe: Fix setting lport's WWNN/WWPN to use san mac address Robert Love
2009-11-03 19:49 ` [PATCH 49/54] libfc: do not use DID_NO_CONNECT for pkt alloc failures Robert Love
2009-11-03 19:49 ` [PATCH 50/54] fcoe: Fix using VLAN ID in creating lport's WWWN/WWPN Robert Love
2009-11-03 19:50 ` [PATCH 51/54] libfc, fcoe: fixes for highmem skb linearize panics Robert Love
2009-11-03 19:50 ` [PATCH 52/54] libfc: fix an issue of pending exch/es after i/f destroyed or rmmod fcoe Robert Love
2009-11-03 19:50 ` [PATCH 53/54] libfcoe: Do not pad FIP keep-alive to full frame size Robert Love
2009-11-03 19:50 ` [PATCH 54/54] libfc fcoe: increase ELS and CT timeouts Robert Love
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091103194827.4085.3666.stgit@localhost.localdomain \
--to=robert.w.love@intel.com \
--cc=James.Bottomley@HansenPartnership.com \
--cc=jeykholt@cisco.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox