* [patch 12/17] NCR5380: bit MR_DMA_MODE set twice in NCR5380_transfer_dma()
@ 2009-12-08 22:09 akpm
0 siblings, 0 replies; only message in thread
From: akpm @ 2009-12-08 22:09 UTC (permalink / raw)
To: James.Bottomley; +Cc: linux-scsi, akpm, roel.kluin, alan
From: Roel Kluin <roel.kluin@gmail.com>
Besides keeping the line short, the second setting of the MR_DMA_MODE bit
was removed.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
drivers/scsi/NCR5380.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff -puN drivers/scsi/NCR5380.c~ncr5380-bit-mr_dma_mode-set-twice-in-ncr5380_transfer_dma drivers/scsi/NCR5380.c
--- a/drivers/scsi/NCR5380.c~ncr5380-bit-mr_dma_mode-set-twice-in-ncr5380_transfer_dma
+++ a/drivers/scsi/NCR5380.c
@@ -1857,7 +1857,9 @@ static int NCR5380_transfer_dma(struct S
#endif
/* KLL May need eop and parity in 53c400 */
if (hostdata->flags & FLAG_NCR53C400)
- NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_ENABLE_PAR_CHECK | MR_ENABLE_PAR_INTR | MR_ENABLE_EOP_INTR | MR_DMA_MODE | MR_MONITOR_BSY);
+ NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE |
+ MR_ENABLE_PAR_CHECK | MR_ENABLE_PAR_INTR |
+ MR_ENABLE_EOP_INTR | MR_MONITOR_BSY);
else
NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE);
#endif /* def REAL_DMA */
_
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2009-12-08 22:12 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-12-08 22:09 [patch 12/17] NCR5380: bit MR_DMA_MODE set twice in NCR5380_transfer_dma() akpm
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox