[PATCH 5/10] mpt2sas: Use compat_ptr to setup the pointer compatibility.

[PATCH 5/10] mpt2sas: Use compat_ptr to setup the pointer compatibility.

[Kashyap, Desai]

On ppc64, an 32bit application was failing due to data buffers not being
copied properly from user to kernel memory.  The problem due to improper
conversion of 32 to 64 bit pointers.  The fix is to use compat_ptr to
setup the pointer compatibility in the routine _ctl_compat_mpt_command.

Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Reviewed-by: Eric Moore <eric.moore@lsi.com>
---
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
index 198ecdd..fa9bf83 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
@@ -2203,14 +2203,10 @@ _ctl_compat_mpt_command(struct file *file, unsigned cmd, unsigned long arg)
 	karg.data_out_size = karg32.data_out_size;
 	karg.max_sense_bytes = karg32.max_sense_bytes;
 	karg.data_sge_offset = karg32.data_sge_offset;
-	memcpy(&karg.reply_frame_buf_ptr, &karg32.reply_frame_buf_ptr,
-	    sizeof(uint32_t));
-	memcpy(&karg.data_in_buf_ptr, &karg32.data_in_buf_ptr,
-	    sizeof(uint32_t));
-	memcpy(&karg.data_out_buf_ptr, &karg32.data_out_buf_ptr,
-	    sizeof(uint32_t));
-	memcpy(&karg.sense_data_ptr, &karg32.sense_data_ptr,
-	    sizeof(uint32_t));
+	karg.reply_frame_buf_ptr = compat_ptr(karg32.reply_frame_buf_ptr);
+	karg.data_in_buf_ptr = compat_ptr(karg32.data_in_buf_ptr);
+	karg.data_out_buf_ptr = compat_ptr(karg32.data_out_buf_ptr);
+	karg.sense_data_ptr = compat_ptr(karg32.sense_data_ptr);
 	state = (file->f_flags & O_NONBLOCK) ? NON_BLOCKING : BLOCKING;
 	return _ctl_do_mpt_command(ioc, karg, &uarg->mf, state);
 }