* [Bug 15283] New: PROBLEM: kernel 2.6.32-7 will not boot -- could not find /dev/root Dell Vostro 1000
@ 2010-02-12 12:58 bugzilla-daemon
2010-02-12 13:00 ` [Bug 15283] " bugzilla-daemon
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: bugzilla-daemon @ 2010-02-12 12:58 UTC (permalink / raw)
To: linux-scsi
http://bugzilla.kernel.org/show_bug.cgi?id=15283
Summary: PROBLEM: kernel 2.6.32-7 will not boot -- could not
find /dev/root Dell Vostro 1000
Product: SCSI Drivers
Version: 2.5
Kernel Version: 2.6.32-7
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: Other
AssignedTo: scsi_drivers-other@kernel-bugs.osdl.org
ReportedBy: imran.javeed@vocalink.com
Regression: No
Created an attachment (id=25002)
--> (http://bugzilla.kernel.org/attachment.cgi?id=25002)
.config file from kernel build
[1.] One line summary of the problem: Upgrade to 2.6.32-7 will not boot(cannot
recognize disk)
[2.] Full description of the problem/report:
I am trying to upgrade my kernel from 2.6.18-53 to 2.6.32-7, the problem i am
having is that the 2.6.32 kernel will not recognize my SATA disk. I have a Dell
Vostro 1000 & have happily been using linux(centos5) with no issues.
Ive ensured the correct options have been set in .config, included libata, ahci
within the kernel(they are not modules) and checked various other information
sources on the net, but it still does not work.(this is the 3rd night now &
still no fix)
Hence my email to you to try & fix for me please?
Attached is the information you require
[3.] Keywords (i.e., modules, networking, kernel):
SATA SB600 ATI
[4.] Kernel information
2.6.32-7
[4.1.] Kernel version (from /proc/version):
CURRENT_VERSION == Linux version 2.6.18-53.el5PAE
(mockbuild@builder6.centos.org) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14))
#1 SMP Mon Nov 12 02:55:09 EST 2007
[4.2.] Kernel .config file:
Attached
[5.] Most recent kernel version which did not have the bug:
That im using right now 2.6.18-53
[6.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt) N/A
[7.] A small shell script or example program which triggers the
problem (if possible)
N/A
[8.] Environment
[8.1.] Software (add the output of the ver_linux script here) Linux uhud
2.6.18-53.el5PAE #1 SMP Mon Nov 12 02:55:09 EST 2007 i686 athlon i386 GNU/Linux
Gnu C 4.1.2
Gnu make 3.81
binutils 2.17.50.0.6
util-linux 2.13-pre7
mount 2.13-pre7
module-init-tools 3.3-pre2
e2fsprogs 1.39
pcmciautils 014
quota-tools 3.13.
PPP 2.4.4
isdn4k-utils 3.9
Linux C Library 2.5
Dynamic linker (ldd) 2.5
Procps 3.2.7
Net-tools 1.60
Kbd 1.12
oprofile 0.9.2
Sh-utils 5.97
udev 095
wireless-tools 28
Modules Loaded ndiswrapper bridge vboxnetflt vboxdrv hidp l2cap
bluetooth configfs sunrpc ip_conntrack_netbios_ns ipt_MASQUERADE iptable_nat
ip_nat ipt_LOG ipt_REJECT xt_state ip_conntrack nfnetlink xt_multiport
iptable_filter ip_tables ip6t_REJECT xt_tcpudp ip6table_filter ip6_tables
x_tables ipv6 cpufreq_ondemand dm_mirror dm_multipath dm_mod video sbs
backlight i2c_ec button battery asus_acpi ac parport_pc lp parport
snd_hda_intel snd_hda_codec snd_seq_dummy snd_seq_oss joydev snd_seq_midi_event
snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss sg snd_pcm ide_cd b44 cdrom
snd_timer snd i2c_piix4 mii k8_edac i2c_core k8temp edac_mc soundcore hwmon
serio_raw sdhci mmc_core snd_page_alloc ahci libata sd_mod scsi_mod ext3 jbd
ehci_hcd ohci_hcd uhci_hcd
[8.2.] Processor information (from /proc/cpuinfo):
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 104
model name : AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping
: 2 cpu MHz : 800.000 cache size : 512 KB physical id : 0
siblings : 2 core id : 0 cpu cores : 2 fdiv_bug :
no hlt_bug : no f00f_bug : no coma_bug : no fpu
: yes fpu_exception : yes cpuid level : 1 wp : yes flags
: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm
3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm extapic cr8legacy 3dnowprefetch
ts fid vid ttp tm stc 100mhzsteps bogomips : 1601.16
processor : 1
vendor_id : AuthenticAMD
cpu family : 15
model : 104
model name : AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping
: 2 cpu MHz : 800.000 cache size : 512 KB physical id : 0
siblings : 2 core id : 1 cpu cores : 2 fdiv_bug :
no hlt_bug : no f00f_bug : no coma_bug : no fpu
: yes fpu_exception : yes cpuid level : 1 wp : yes flags
: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm
3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm extapic cr8legacy 3dnowprefetch
ts fid vid ttp tm stc 100mhzsteps bogomips : 1601.16
[8.3.] Module information (from /proc/modules):
ndiswrapper 169360 0 - Live 0xf9023000
bridge 53341 0 - Live 0xf8d9b000
vboxnetflt 79400 0 - Live 0xf8d86000
vboxdrv 103208 1 vboxnetflt, Live 0xf8d6b000 hidp 23105 2 - Live 0xf8d0d000
l2cap 29633 5 hidp, Live 0xf8d04000 bluetooth 53925 2 hidp,l2cap, Live
0xf8d3e000 configfs 28753 1 - Live 0xf8cfb000 sunrpc 144253 1 - Live 0xf8d19000
ip_conntrack_netbios_ns 6977 0 - Live 0xf8c84000 ipt_MASQUERADE 7745 3 - Live
0xf8c72000 iptable_nat 11205 1 - Live 0xf8ced000 ip_nat 20973 2
ipt_MASQUERADE,iptable_nat, Live 0xf8cd5000 ipt_LOG 10177 1 - Live 0xf8c78000
ipt_REJECT 9537 8 - Live 0xf8c7c000 xt_state 6209 7 - Live 0xf8c75000
ip_conntrack 53025 5
ip_conntrack_netbios_ns,ipt_MASQUERADE,iptable_nat,ip_nat,xt_state, Live
0xf8cc7000 nfnetlink 10713 2 ip_nat,ip_conntrack, Live 0xf8c51000 xt_multiport
7233 1 - Live 0xf8c5f000 iptable_filter 7105 1 - Live 0xf8c5c000 ip_tables
17029 2 iptable_nat,iptable_filter, Live 0xf8c62000 ip6t_REJECT 9409 1 - Live
0xf8c58000 xt_tcpudp 7105 53 - Live 0xf8c55000 ip6table_filter 6849 1 - Live
0xf8c3e000 ip6_tables 18181 1 ip6table_filter, Live 0xf8c4b000 x_tables 17349
10
ipt_MASQUERADE,iptable_nat,ipt_LOG,ipt_REJECT,xt_state,xt_multiport,ip_tables,ip
6t_REJECT,xt_tcpudp,ip6_tables, Live 0xf8c45000
ipv6 251393 21 ip6t_REJECT, Live 0xf8c88000 cpufreq_ondemand 10573 1 - Live
0xf8a35000 dm_mirror 28869 0 - Live 0xf8a3a000 dm_multipath 21577 0 - Live
0xf89ee000 dm_mod 58457 2 dm_mirror,dm_multipath, Live 0xf8a43000 video 19269 0
- Live 0xf89f5000 sbs 18533 0 - Live 0xf89c2000 backlight 10049 0 - Live
0xf89ea000 i2c_ec 9025 1 sbs, Live 0xf89e6000 button 10705 0 - Live 0xf89e2000
battery 13637 0 - Live 0xf89c8000 asus_acpi 19289 0 - Live 0xf896c000 ac 9157 0
- Live 0xf8995000 parport_pc 29157 0 - Live 0xf89d9000 lp 15849 0 - Live
0xf89ad000 parport 37513 2 parport_pc,lp, Live 0xf89ce000 snd_hda_intel 24025 0
- Live 0xf89bb000 snd_hda_codec 202689 1 snd_hda_intel, Live 0xf89fd000
snd_seq_dummy 7877 0 - Live 0xf8992000 snd_seq_oss 32577 0 - Live 0xf89b2000
joydev 13313 0 - Live 0xf898d000 snd_seq_midi_event 11073 1 snd_seq_oss, Live
0xf8989000 snd_seq 49713 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event, Live
0xf8999000 snd_seq_device 11725 3 snd_seq_dummy,snd_seq_oss,snd_seq, Live
0xf8985000 snd_pcm_oss 42945 0 - Live 0xf893b000 snd_mixer_oss 19009 1
snd_pcm_oss, Live 0xf8966000 sg 35933 0 - Live 0xf895c000 snd_pcm 72133 3
snd_hda_intel,snd_hda_codec,snd_pcm_oss, Live 0xf8972000 ide_cd 40033 0 - Live
0xf8951000
b44 29133 0 - Live 0xf891c000
cdrom 36705 1 ide_cd, Live 0xf8947000
snd_timer 24645 2 snd_seq,snd_pcm, Live 0xf8925000 snd 52421 9
snd_hda_intel,snd_hda_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_m
ixer_oss,snd_pcm,snd_timer, Live 0xf892d000
i2c_piix4 12237 0 - Live 0xf8902000
mii 9409 1 b44, Live 0xf88fe000
k8_edac 18177 0 - Live 0xf8916000
i2c_core 23745 2 i2c_ec,i2c_piix4, Live 0xf890f000 k8temp 9537 0 - Live
0xf88db000 edac_mc 24977 1 k8_edac, Live 0xf8907000 soundcore 11553 1 snd, Live
0xf88d7000 hwmon 7365 1 k8temp, Live 0xf88d4000 serio_raw 10693 0 - Live
0xf88c8000 sdhci 21337 0 - Live 0xf8846000 mmc_core 27457 1 sdhci, Live
0xf88cc000 snd_page_alloc 13769 2 snd_hda_intel,snd_pcm, Live 0xf88be000 ahci
23621 2 - Live 0xf885f000 libata 115961 1 ahci, Live 0xf88e0000 sd_mod 24897 3
- Live 0xf8857000 scsi_mod 132685 3 sg,libata,sd_mod, Live 0xf8879000
ext3 123337 1 - Live 0xf889e000
jbd 56553 1 ext3, Live 0xf886a000
ehci_hcd 33229 0 - Live 0xf884d000
ohci_hcd 23389 0 - Live 0xf8837000
uhci_hcd 25549 0 - Live 0xf882f000
[8.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
0220-022f : pnp 00:08
03c0-03df : vga+
03f6-03f6 : ide0
1080-1080 : motherboard
1080-1080 : pnp 00:08
8000-805f : motherboard
8000-8003 : ACPI PM1a_EVT_BLK
8004-8005 : ACPI PM1a_CNT_BLK
8008-800b : ACPI PM_TMR
8010-8015 : ACPI CPU throttle
8020-8027 : ACPI GPE0_BLK
8200-8200 : ACPI PM2_CNT_BLK
8204-8207 : ACPI PM1b_EVT_BLK
8400-840f : 0000:00:12.0
8410-841f : 0000:00:14.0
8410-8417 : piix4_smbus
8420-842f : 0000:00:14.1
8420-8427 : ide0
8430-8437 : 0000:00:12.0
8438-843f : 0000:00:12.0
8450-8453 : 0000:00:12.0
8454-8457 : 0000:00:12.0
9000-9fff : PCI Bus #01
9000-90ff : 0000:01:05.0
################################
00000000-0009dbff : System RAM
00000000-00000000 : Crash kernel
0009dc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000ccfff : Video ROM
000cd000-000cdfff : Adapter ROM
000f0000-000fffff : System ROM
00100000-a7e6ffff : System RAM
00400000-006075e0 : Kernel code
006075e1-006de9bb : Kernel data
a7e70000-a7e7ffff : ACPI Tables
a7e80000-a7efffff : ACPI Non-volatile Storage a7f00000-afffffff : reserved
c0000000-c0003fff : 0000:00:14.2
c0000000-c0003fff : ICH HD audio
c0004000-c00043ff : 0000:00:12.0
c0004000-c00043ff : ahci
c0004400-c00044ff : 0000:00:13.5
c0004400-c00044ff : ehci_hcd
c0005000-c0005fff : 0000:00:13.0
c0005000-c0005fff : ohci_hcd
c0006000-c0006fff : 0000:00:13.1
c0006000-c0006fff : ohci_hcd
c0007000-c0007fff : 0000:00:13.2
c0007000-c0007fff : ohci_hcd
c0008000-c0008fff : 0000:00:13.3
c0008000-c0008fff : ohci_hcd
c0009000-c0009fff : 0000:00:13.4
c0009000-c0009fff : ohci_hcd
c0100000-c01fffff : PCI Bus #01
c0100000-c010ffff : 0000:01:05.0
c0120000-c013ffff : 0000:01:05.0
c0200000-c02fffff : PCI Bus #05
c0200000-c0203fff : 0000:05:00.0
c0200000-c0203fff : ndiswrapper
c0300000-c03fffff : PCI Bus #08
c0300000-c0301fff : 0000:08:00.0
c0300000-c0301fff : b44
c0302800-c03028ff : 0000:08:01.0
c0302800-c03028ff : sdhci:slot0
c0302c00-c0302cff : 0000:08:01.1
c8000000-cfffffff : PCI Bus #01
c8000000-cfffffff : 0000:01:05.0
e0000000-efffffff : reserved
fec00000-fec0ffff : reserved
fed00000-fed003ff : 0000:00:14.0
fee00000-fee00fff : reserved
fff80000-ffffffff : reserved
100000000-14fffffff : System RAM
[8.5.] PCI information ('lspci -vvv' as root) 00:00.0 Host bridge: ATI
Technologies Inc RS480 Host Bridge (rev 10)
Subsystem: Dell Unknown device 022a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort+ <MAbort+ >SERR- <PERR-
Latency: 64
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00009000-00009fff
Memory behind bridge: c0100000-c01fffff
Prefetchable memory behind bridge: 00000000c8000000-00000000cff00000
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [44] HyperTransport: MSI Mapping
Capabilities: [b0] #0d [0000]
00:05.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal
decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=04, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
Device: Latency L0s <64ns, L1 <1us
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 247
Link: Latency L0s <64ns, L1 <1us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x16
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
Slot: Number 0, PowerLimit 0.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Off, PwrInd Off, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000
Capabilities: [b0] #0d [0000]
Capabilities: [b8] HyperTransport: MSI Mapping
00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=07, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: c0200000-c02fffff
Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
Device: Latency L0s <64ns, L1 <1us
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 3
Link: Latency L0s <64ns, L1 <1us
Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
Slot: Number 0, PowerLimit 25.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Off, PwrInd Off, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000
Capabilities: [b0] #0d [0000]
Capabilities: [b8] HyperTransport: MSI Mapping
00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA (prog-if 01
[AHCI 1.0])
Subsystem: Dell Unknown device 022a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort+
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 209
Region 0: I/O ports at 8438 [size=8]
Region 1: I/O ports at 8454 [size=4]
Region 2: I/O ports at 8430 [size=8]
Region 3: I/O ports at 8450 [size=4]
Region 4: I/O ports at 8400 [size=16]
Region 5: Memory at c0004000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0) (prog-if 10
[OHCI])
Subsystem: Dell Unknown device 022a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 177
Region 0: Memory at c0005000 (32-bit, non-prefetchable) [size=4K]
00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1) (prog-if 10
[OHCI])
Subsystem: Dell Unknown device 022a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 185
Region 0: Memory at c0006000 (32-bit, non-prefetchable) [size=4K]
00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2) (prog-if 10
[OHCI])
Subsystem: Dell Unknown device 022a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 193
Region 0: Memory at c0007000 (32-bit, non-prefetchable) [size=4K]
00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3) (prog-if 10
[OHCI])
Subsystem: Dell Unknown device 022a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 185
Region 0: Memory at c0008000 (32-bit, non-prefetchable) [size=4K]
00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4) (prog-if 10
[OHCI])
Subsystem: Dell Unknown device 022a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 193
Region 0: Memory at c0009000 (32-bit, non-prefetchable) [size=4K]
00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI)
(prog-if 20 [EHCI])
Subsystem: Dell Unknown device 022a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 201
Region 0: Memory at c0004400 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14)
Subsystem: Dell Unknown device 022a
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Region 0: I/O ports at 8410 [size=16]
Region 1: Memory at fed00000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [b0] HyperTransport: MSI Mapping
00:14.1 IDE interface: ATI Technologies Inc SB600 IDE (prog-if 8a [Master SecP
PriP])
Subsystem: Dell Unknown device 022a
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 177
Region 0: I/O ports at <ignored>
Region 1: I/O ports at <ignored>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at 8420 [size=16]
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia
Subsystem: Dell Unknown device 022a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin ? routed to IRQ 177
Region 0: Memory at c0000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
Subsystem: Dell Unknown device 022a
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (prog-if 01
[Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=08, subordinate=0a, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: c0300000-c03fffff
Prefetchable memory behind bridge: fff00000-000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Capabilities: [80] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
<CRCErr=8
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address
Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM
Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Capabilities: [f0] #0f [0010]
01:05.0 VGA compatible controller: ATI Technologies Inc RS482 [Radeon Xpress
200] (prog-if 00 [VGA])
Subsystem: Dell Unknown device 022a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 255 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at c8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at c0120000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
05:00.0 Network controller: Broadcom Corporation BCM94311MCG wlan mini-PCI (rev
01)
Subsystem: Dell Unknown device 0007
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 193
Region 0: Memory at c0200000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000
Capabilities: [d0] Express Legacy Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
Device: Latency L0s <4us, L1 unlimited
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
Link: Latency L0s <4us, L1 <64us
Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Capabilities: [100] Advanced Error Reporting
Capabilities: [13c] Virtual Channel
08:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev
02)
Subsystem: Dell Unknown device 022a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 225
Region 0: Memory at c0300000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
08:01.0 Class 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev
22)
Subsystem: Dell Unknown device 022a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 217
Region 0: Memory at c0302800 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
08:01.1 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
Subsystem: Dell Unknown device 022a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 9
Region 0: Memory at c0302c00 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
[8.6.] SCSI information (from /proc/scsi/scsi)
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: FUJITSU MHY2160B Rev: 0085
Type: Direct-Access ANSI SCSI revision: 05
[8.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):
[X.] Other notes, patches, fixes, workarounds:Hello
--
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 5+ messages in thread* [Bug 15283] PROBLEM: kernel 2.6.32-7 will not boot -- could not find /dev/root Dell Vostro 1000
2010-02-12 12:58 [Bug 15283] New: PROBLEM: kernel 2.6.32-7 will not boot -- could not find /dev/root Dell Vostro 1000 bugzilla-daemon
@ 2010-02-12 13:00 ` bugzilla-daemon
2010-02-12 13:13 ` [Bug 15283] New: " James Bottomley
2010-02-12 13:48 ` [Bug 15283] " bugzilla-daemon
2 siblings, 0 replies; 5+ messages in thread
From: bugzilla-daemon @ 2010-02-12 13:00 UTC (permalink / raw)
To: linux-scsi
http://bugzilla.kernel.org/show_bug.cgi?id=15283
--- Comment #1 from frank_g <imran.javeed@vocalink.com> 2010-02-12 12:59:58 ---
Thank you
--
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Bug 15283] New: PROBLEM: kernel 2.6.32-7 will not boot -- could not find /dev/root Dell Vostro 1000
2010-02-12 12:58 [Bug 15283] New: PROBLEM: kernel 2.6.32-7 will not boot -- could not find /dev/root Dell Vostro 1000 bugzilla-daemon
2010-02-12 13:00 ` [Bug 15283] " bugzilla-daemon
@ 2010-02-12 13:13 ` James Bottomley
2010-02-12 13:48 ` [Bug 15283] " bugzilla-daemon
2 siblings, 0 replies; 5+ messages in thread
From: James Bottomley @ 2010-02-12 13:13 UTC (permalink / raw)
To: bugzilla-daemon; +Cc: linux-scsi, linux-ide
On Fri, 2010-02-12 at 12:58 +0000, bugzilla-daemon@bugzilla.kernel.org
wrote:
> http://bugzilla.kernel.org/show_bug.cgi?id=15283
Adding cc to linux-ide because this looks to be a SATA controller error
>
> Summary: PROBLEM: kernel 2.6.32-7 will not boot -- could not
> find /dev/root Dell Vostro 1000
> Product: SCSI Drivers
> Version: 2.5
> Kernel Version: 2.6.32-7
> Platform: All
> OS/Version: Linux
> Tree: Mainline
> Status: NEW
> Severity: normal
> Priority: P1
> Component: Other
> AssignedTo: scsi_drivers-other@kernel-bugs.osdl.org
> ReportedBy: imran.javeed@vocalink.com
> Regression: No
>
>
> Created an attachment (id=25002)
> --> (http://bugzilla.kernel.org/attachment.cgi?id=25002)
> .config file from kernel build
>
> [1.] One line summary of the problem: Upgrade to 2.6.32-7 will not boot(cannot
> recognize disk)
So what they're really going to need to debug this is a boot log showing
the failure, if you could attach one ... without that, you'll have to
hope that someone has a SB600 and can reproduce.
James
> [2.] Full description of the problem/report:
>
> I am trying to upgrade my kernel from 2.6.18-53 to 2.6.32-7, the problem i am
> having is that the 2.6.32 kernel will not recognize my SATA disk. I have a Dell
> Vostro 1000 & have happily been using linux(centos5) with no issues.
>
> Ive ensured the correct options have been set in .config, included libata, ahci
> within the kernel(they are not modules) and checked various other information
> sources on the net, but it still does not work.(this is the 3rd night now &
> still no fix)
>
> Hence my email to you to try & fix for me please?
>
> Attached is the information you require
>
> [3.] Keywords (i.e., modules, networking, kernel):
> SATA SB600 ATI
>
> [4.] Kernel information
> 2.6.32-7
> [4.1.] Kernel version (from /proc/version):
> CURRENT_VERSION == Linux version 2.6.18-53.el5PAE
> (mockbuild@builder6.centos.org) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14))
> #1 SMP Mon Nov 12 02:55:09 EST 2007
>
> [4.2.] Kernel .config file:
> Attached
>
> [5.] Most recent kernel version which did not have the bug:
> That im using right now 2.6.18-53
>
> [6.] Output of Oops.. message (if applicable) with symbolic information
> resolved (see Documentation/oops-tracing.txt) N/A
>
> [7.] A small shell script or example program which triggers the
> problem (if possible)
> N/A
>
> [8.] Environment
>
> [8.1.] Software (add the output of the ver_linux script here) Linux uhud
> 2.6.18-53.el5PAE #1 SMP Mon Nov 12 02:55:09 EST 2007 i686 athlon i386 GNU/Linux
>
> Gnu C 4.1.2
> Gnu make 3.81
> binutils 2.17.50.0.6
> util-linux 2.13-pre7
> mount 2.13-pre7
> module-init-tools 3.3-pre2
> e2fsprogs 1.39
> pcmciautils 014
> quota-tools 3.13.
> PPP 2.4.4
> isdn4k-utils 3.9
> Linux C Library 2.5
> Dynamic linker (ldd) 2.5
> Procps 3.2.7
> Net-tools 1.60
> Kbd 1.12
> oprofile 0.9.2
> Sh-utils 5.97
> udev 095
> wireless-tools 28
> Modules Loaded ndiswrapper bridge vboxnetflt vboxdrv hidp l2cap
> bluetooth configfs sunrpc ip_conntrack_netbios_ns ipt_MASQUERADE iptable_nat
> ip_nat ipt_LOG ipt_REJECT xt_state ip_conntrack nfnetlink xt_multiport
> iptable_filter ip_tables ip6t_REJECT xt_tcpudp ip6table_filter ip6_tables
> x_tables ipv6 cpufreq_ondemand dm_mirror dm_multipath dm_mod video sbs
> backlight i2c_ec button battery asus_acpi ac parport_pc lp parport
> snd_hda_intel snd_hda_codec snd_seq_dummy snd_seq_oss joydev snd_seq_midi_event
> snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss sg snd_pcm ide_cd b44 cdrom
> snd_timer snd i2c_piix4 mii k8_edac i2c_core k8temp edac_mc soundcore hwmon
> serio_raw sdhci mmc_core snd_page_alloc ahci libata sd_mod scsi_mod ext3 jbd
> ehci_hcd ohci_hcd uhci_hcd
>
>
> [8.2.] Processor information (from /proc/cpuinfo):
> processor : 0
> vendor_id : AuthenticAMD
> cpu family : 15
> model : 104
> model name : AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping
> : 2 cpu MHz : 800.000 cache size : 512 KB physical id : 0
> siblings : 2 core id : 0 cpu cores : 2 fdiv_bug :
> no hlt_bug : no f00f_bug : no coma_bug : no fpu
> : yes fpu_exception : yes cpuid level : 1 wp : yes flags
> : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
> pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm
> 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm extapic cr8legacy 3dnowprefetch
> ts fid vid ttp tm stc 100mhzsteps bogomips : 1601.16
>
> processor : 1
> vendor_id : AuthenticAMD
> cpu family : 15
> model : 104
> model name : AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping
> : 2 cpu MHz : 800.000 cache size : 512 KB physical id : 0
> siblings : 2 core id : 1 cpu cores : 2 fdiv_bug :
> no hlt_bug : no f00f_bug : no coma_bug : no fpu
> : yes fpu_exception : yes cpuid level : 1 wp : yes flags
> : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
> pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm
> 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm extapic cr8legacy 3dnowprefetch
> ts fid vid ttp tm stc 100mhzsteps bogomips : 1601.16
>
> [8.3.] Module information (from /proc/modules):
>
> ndiswrapper 169360 0 - Live 0xf9023000
> bridge 53341 0 - Live 0xf8d9b000
> vboxnetflt 79400 0 - Live 0xf8d86000
> vboxdrv 103208 1 vboxnetflt, Live 0xf8d6b000 hidp 23105 2 - Live 0xf8d0d000
> l2cap 29633 5 hidp, Live 0xf8d04000 bluetooth 53925 2 hidp,l2cap, Live
> 0xf8d3e000 configfs 28753 1 - Live 0xf8cfb000 sunrpc 144253 1 - Live 0xf8d19000
> ip_conntrack_netbios_ns 6977 0 - Live 0xf8c84000 ipt_MASQUERADE 7745 3 - Live
> 0xf8c72000 iptable_nat 11205 1 - Live 0xf8ced000 ip_nat 20973 2
> ipt_MASQUERADE,iptable_nat, Live 0xf8cd5000 ipt_LOG 10177 1 - Live 0xf8c78000
> ipt_REJECT 9537 8 - Live 0xf8c7c000 xt_state 6209 7 - Live 0xf8c75000
> ip_conntrack 53025 5
> ip_conntrack_netbios_ns,ipt_MASQUERADE,iptable_nat,ip_nat,xt_state, Live
> 0xf8cc7000 nfnetlink 10713 2 ip_nat,ip_conntrack, Live 0xf8c51000 xt_multiport
> 7233 1 - Live 0xf8c5f000 iptable_filter 7105 1 - Live 0xf8c5c000 ip_tables
> 17029 2 iptable_nat,iptable_filter, Live 0xf8c62000 ip6t_REJECT 9409 1 - Live
> 0xf8c58000 xt_tcpudp 7105 53 - Live 0xf8c55000 ip6table_filter 6849 1 - Live
> 0xf8c3e000 ip6_tables 18181 1 ip6table_filter, Live 0xf8c4b000 x_tables 17349
> 10
> ipt_MASQUERADE,iptable_nat,ipt_LOG,ipt_REJECT,xt_state,xt_multiport,ip_tables,ip
> 6t_REJECT,xt_tcpudp,ip6_tables, Live 0xf8c45000
> ipv6 251393 21 ip6t_REJECT, Live 0xf8c88000 cpufreq_ondemand 10573 1 - Live
> 0xf8a35000 dm_mirror 28869 0 - Live 0xf8a3a000 dm_multipath 21577 0 - Live
> 0xf89ee000 dm_mod 58457 2 dm_mirror,dm_multipath, Live 0xf8a43000 video 19269 0
> - Live 0xf89f5000 sbs 18533 0 - Live 0xf89c2000 backlight 10049 0 - Live
> 0xf89ea000 i2c_ec 9025 1 sbs, Live 0xf89e6000 button 10705 0 - Live 0xf89e2000
> battery 13637 0 - Live 0xf89c8000 asus_acpi 19289 0 - Live 0xf896c000 ac 9157 0
> - Live 0xf8995000 parport_pc 29157 0 - Live 0xf89d9000 lp 15849 0 - Live
> 0xf89ad000 parport 37513 2 parport_pc,lp, Live 0xf89ce000 snd_hda_intel 24025 0
> - Live 0xf89bb000 snd_hda_codec 202689 1 snd_hda_intel, Live 0xf89fd000
> snd_seq_dummy 7877 0 - Live 0xf8992000 snd_seq_oss 32577 0 - Live 0xf89b2000
> joydev 13313 0 - Live 0xf898d000 snd_seq_midi_event 11073 1 snd_seq_oss, Live
> 0xf8989000 snd_seq 49713 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event, Live
> 0xf8999000 snd_seq_device 11725 3 snd_seq_dummy,snd_seq_oss,snd_seq, Live
> 0xf8985000 snd_pcm_oss 42945 0 - Live 0xf893b000 snd_mixer_oss 19009 1
> snd_pcm_oss, Live 0xf8966000 sg 35933 0 - Live 0xf895c000 snd_pcm 72133 3
> snd_hda_intel,snd_hda_codec,snd_pcm_oss, Live 0xf8972000 ide_cd 40033 0 - Live
> 0xf8951000
> b44 29133 0 - Live 0xf891c000
> cdrom 36705 1 ide_cd, Live 0xf8947000
> snd_timer 24645 2 snd_seq,snd_pcm, Live 0xf8925000 snd 52421 9
> snd_hda_intel,snd_hda_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_m
> ixer_oss,snd_pcm,snd_timer, Live 0xf892d000
> i2c_piix4 12237 0 - Live 0xf8902000
> mii 9409 1 b44, Live 0xf88fe000
> k8_edac 18177 0 - Live 0xf8916000
> i2c_core 23745 2 i2c_ec,i2c_piix4, Live 0xf890f000 k8temp 9537 0 - Live
> 0xf88db000 edac_mc 24977 1 k8_edac, Live 0xf8907000 soundcore 11553 1 snd, Live
> 0xf88d7000 hwmon 7365 1 k8temp, Live 0xf88d4000 serio_raw 10693 0 - Live
> 0xf88c8000 sdhci 21337 0 - Live 0xf8846000 mmc_core 27457 1 sdhci, Live
> 0xf88cc000 snd_page_alloc 13769 2 snd_hda_intel,snd_pcm, Live 0xf88be000 ahci
> 23621 2 - Live 0xf885f000 libata 115961 1 ahci, Live 0xf88e0000 sd_mod 24897 3
> - Live 0xf8857000 scsi_mod 132685 3 sg,libata,sd_mod, Live 0xf8879000
> ext3 123337 1 - Live 0xf889e000
> jbd 56553 1 ext3, Live 0xf886a000
> ehci_hcd 33229 0 - Live 0xf884d000
> ohci_hcd 23389 0 - Live 0xf8837000
> uhci_hcd 25549 0 - Live 0xf882f000
>
>
> [8.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
> 000-001f : dma1
> 0020-0021 : pic1
> 0040-0043 : timer0
> 0050-0053 : timer1
> 0060-006f : keyboard
> 0070-0077 : rtc
> 0080-008f : dma page reg
> 00a0-00a1 : pic2
> 00c0-00df : dma2
> 00f0-00ff : fpu
> 01f0-01f7 : ide0
> 0220-022f : pnp 00:08
> 03c0-03df : vga+
> 03f6-03f6 : ide0
> 1080-1080 : motherboard
> 1080-1080 : pnp 00:08
> 8000-805f : motherboard
> 8000-8003 : ACPI PM1a_EVT_BLK
> 8004-8005 : ACPI PM1a_CNT_BLK
> 8008-800b : ACPI PM_TMR
> 8010-8015 : ACPI CPU throttle
> 8020-8027 : ACPI GPE0_BLK
> 8200-8200 : ACPI PM2_CNT_BLK
> 8204-8207 : ACPI PM1b_EVT_BLK
> 8400-840f : 0000:00:12.0
> 8410-841f : 0000:00:14.0
> 8410-8417 : piix4_smbus
> 8420-842f : 0000:00:14.1
> 8420-8427 : ide0
> 8430-8437 : 0000:00:12.0
> 8438-843f : 0000:00:12.0
> 8450-8453 : 0000:00:12.0
> 8454-8457 : 0000:00:12.0
> 9000-9fff : PCI Bus #01
> 9000-90ff : 0000:01:05.0
> ################################
> 00000000-0009dbff : System RAM
> 00000000-00000000 : Crash kernel
> 0009dc00-0009ffff : reserved
> 000a0000-000bffff : Video RAM area
> 000c0000-000ccfff : Video ROM
> 000cd000-000cdfff : Adapter ROM
> 000f0000-000fffff : System ROM
> 00100000-a7e6ffff : System RAM
> 00400000-006075e0 : Kernel code
> 006075e1-006de9bb : Kernel data
> a7e70000-a7e7ffff : ACPI Tables
> a7e80000-a7efffff : ACPI Non-volatile Storage a7f00000-afffffff : reserved
> c0000000-c0003fff : 0000:00:14.2
> c0000000-c0003fff : ICH HD audio
> c0004000-c00043ff : 0000:00:12.0
> c0004000-c00043ff : ahci
> c0004400-c00044ff : 0000:00:13.5
> c0004400-c00044ff : ehci_hcd
> c0005000-c0005fff : 0000:00:13.0
> c0005000-c0005fff : ohci_hcd
> c0006000-c0006fff : 0000:00:13.1
> c0006000-c0006fff : ohci_hcd
> c0007000-c0007fff : 0000:00:13.2
> c0007000-c0007fff : ohci_hcd
> c0008000-c0008fff : 0000:00:13.3
> c0008000-c0008fff : ohci_hcd
> c0009000-c0009fff : 0000:00:13.4
> c0009000-c0009fff : ohci_hcd
> c0100000-c01fffff : PCI Bus #01
> c0100000-c010ffff : 0000:01:05.0
> c0120000-c013ffff : 0000:01:05.0
> c0200000-c02fffff : PCI Bus #05
> c0200000-c0203fff : 0000:05:00.0
> c0200000-c0203fff : ndiswrapper
> c0300000-c03fffff : PCI Bus #08
> c0300000-c0301fff : 0000:08:00.0
> c0300000-c0301fff : b44
> c0302800-c03028ff : 0000:08:01.0
> c0302800-c03028ff : sdhci:slot0
> c0302c00-c0302cff : 0000:08:01.1
> c8000000-cfffffff : PCI Bus #01
> c8000000-cfffffff : 0000:01:05.0
> e0000000-efffffff : reserved
> fec00000-fec0ffff : reserved
> fed00000-fed003ff : 0000:00:14.0
> fee00000-fee00fff : reserved
> fff80000-ffffffff : reserved
> 100000000-14fffffff : System RAM
>
>
>
> [8.5.] PCI information ('lspci -vvv' as root) 00:00.0 Host bridge: ATI
> Technologies Inc RS480 Host Bridge (rev 10)
> Subsystem: Dell Unknown device 022a
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort+ <MAbort+ >SERR- <PERR-
> Latency: 64
>
> 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal
> decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
> I/O behind bridge: 00009000-00009fff
> Memory behind bridge: c0100000-c01fffff
> Prefetchable memory behind bridge: 00000000c8000000-00000000cff00000
> Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
> Capabilities: [44] HyperTransport: MSI Mapping
> Capabilities: [b0] #0d [0000]
>
> 00:05.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal
> decode])
> Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> Latency: 0, Cache Line Size: 32 bytes
> Bus: primary=00, secondary=02, subordinate=04, sec-latency=0
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: fff00000-000fffff
> Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> Capabilities: [50] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] Express Root Port (Slot+) IRQ 0
> Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
> Device: Latency L0s <64ns, L1 <1us
> Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
> Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
> Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 247
> Link: Latency L0s <64ns, L1 <1us
> Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
> Link: Speed 2.5Gb/s, Width x16
> Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
> Slot: Number 0, PowerLimit 0.000000
> Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
> Slot: AttnInd Off, PwrInd Off, Power-
> Root: Correctable- Non-Fatal- Fatal- PME-
> Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0
> Enable-
> Address: 00000000 Data: 0000
> Capabilities: [b0] #0d [0000]
> Capabilities: [b8] HyperTransport: MSI Mapping
>
> 00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal
> decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> Latency: 0, Cache Line Size: 32 bytes
> Bus: primary=00, secondary=05, subordinate=07, sec-latency=0
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: c0200000-c02fffff
> Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> Capabilities: [50] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] Express Root Port (Slot+) IRQ 0
> Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
> Device: Latency L0s <64ns, L1 <1us
> Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
> Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
> Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 3
> Link: Latency L0s <64ns, L1 <1us
> Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
> Link: Speed 2.5Gb/s, Width x1
> Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
> Slot: Number 0, PowerLimit 25.000000
> Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
> Slot: AttnInd Off, PwrInd Off, Power-
> Root: Correctable- Non-Fatal- Fatal- PME-
> Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0
> Enable-
> Address: 00000000 Data: 0000
> Capabilities: [b0] #0d [0000]
> Capabilities: [b8] HyperTransport: MSI Mapping
>
> 00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA (prog-if 01
> [AHCI 1.0])
> Subsystem: Dell Unknown device 022a
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort+
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64
> Interrupt: pin A routed to IRQ 209
> Region 0: I/O ports at 8438 [size=8]
> Region 1: I/O ports at 8454 [size=4]
> Region 2: I/O ports at 8430 [size=8]
> Region 3: I/O ports at 8450 [size=4]
> Region 4: I/O ports at 8400 [size=16]
> Region 5: Memory at c0004000 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [60] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0) (prog-if 10
> [OHCI])
> Subsystem: Dell Unknown device 022a
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 177
> Region 0: Memory at c0005000 (32-bit, non-prefetchable) [size=4K]
>
> 00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1) (prog-if 10
> [OHCI])
> Subsystem: Dell Unknown device 022a
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin B routed to IRQ 185
> Region 0: Memory at c0006000 (32-bit, non-prefetchable) [size=4K]
>
> 00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2) (prog-if 10
> [OHCI])
> Subsystem: Dell Unknown device 022a
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin C routed to IRQ 193
> Region 0: Memory at c0007000 (32-bit, non-prefetchable) [size=4K]
>
> 00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3) (prog-if 10
> [OHCI])
> Subsystem: Dell Unknown device 022a
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin B routed to IRQ 185
> Region 0: Memory at c0008000 (32-bit, non-prefetchable) [size=4K]
>
> 00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4) (prog-if 10
> [OHCI])
> Subsystem: Dell Unknown device 022a
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin C routed to IRQ 193
> Region 0: Memory at c0009000 (32-bit, non-prefetchable) [size=4K]
>
> 00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI)
> (prog-if 20 [EHCI])
> Subsystem: Dell Unknown device 022a
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 64 bytes
> Interrupt: pin D routed to IRQ 201
> Region 0: Memory at c0004400 (32-bit, non-prefetchable) [size=256]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Bridge: PM- B3+
> Capabilities: [e4] Debug port
>
> 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14)
> Subsystem: Dell Unknown device 022a
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Region 0: I/O ports at 8410 [size=16]
> Region 1: Memory at fed00000 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [b0] HyperTransport: MSI Mapping
>
> 00:14.1 IDE interface: ATI Technologies Inc SB600 IDE (prog-if 8a [Master SecP
> PriP])
> Subsystem: Dell Unknown device 022a
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin A routed to IRQ 177
> Region 0: I/O ports at <ignored>
> Region 1: I/O ports at <ignored>
> Region 2: I/O ports at <unassigned>
> Region 3: I/O ports at <unassigned>
> Region 4: I/O ports at 8420 [size=16]
>
> 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia
> Subsystem: Dell Unknown device 022a
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin ? routed to IRQ 177
> Region 0: Memory at c0000000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
> Subsystem: Dell Unknown device 022a
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
>
> 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (prog-if 01
> [Subtractive decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64
> Bus: primary=00, secondary=08, subordinate=0a, sec-latency=64
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: c0300000-c03fffff
> Prefetchable memory behind bridge: fff00000-000fffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>
> 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> HyperTransport Technology Configuration
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> Capabilities: [80] HyperTransport: Host or Secondary Interface
> !!! Possibly incomplete decoding
> Command: WarmRst+ DblEnd-
> Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
> <CRCErr=8
> Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
> Revision ID: 1.02
>
> 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address
> Map
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM
> Controller
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
>
> 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> Miscellaneous Control
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> Capabilities: [f0] #0f [0010]
>
> 01:05.0 VGA compatible controller: ATI Technologies Inc RS482 [Radeon Xpress
> 200] (prog-if 00 [VGA])
> Subsystem: Dell Unknown device 022a
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 255 (2000ns min), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 10
> Region 0: Memory at c8000000 (32-bit, prefetchable) [size=128M]
> Region 1: I/O ports at 9000 [size=256]
> Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
> [virtual] Expansion ROM at c0120000 [disabled] [size=128K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 05:00.0 Network controller: Broadcom Corporation BCM94311MCG wlan mini-PCI (rev
> 01)
> Subsystem: Dell Unknown device 0007
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> Latency: 0, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 193
> Region 0: Memory at c0200000 (32-bit, non-prefetchable) [size=16K]
> Capabilities: [40] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
> Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/0
> Enable-
> Address: 00000000 Data: 0000
> Capabilities: [d0] Express Legacy Endpoint IRQ 0
> Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
> Device: Latency L0s <4us, L1 unlimited
> Device: AtnBtn- AtnInd- PwrInd-
> Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
> Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
> Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
> Link: Latency L0s <4us, L1 <64us
> Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
> Link: Speed 2.5Gb/s, Width x1
> Capabilities: [100] Advanced Error Reporting
> Capabilities: [13c] Virtual Channel
>
> 08:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev
> 02)
> Subsystem: Dell Unknown device 022a
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> Latency: 64
> Interrupt: pin A routed to IRQ 225
> Region 0: Memory at c0300000 (32-bit, non-prefetchable) [size=8K]
> Capabilities: [40] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
> 08:01.0 Class 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev
> 22)
> Subsystem: Dell Unknown device 022a
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin B routed to IRQ 217
> Region 0: Memory at c0302800 (32-bit, non-prefetchable) [size=256]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
> 08:01.1 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
> Subsystem: Dell Unknown device 022a
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin B routed to IRQ 9
> Region 0: Memory at c0302c00 (32-bit, non-prefetchable) [size=256]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
>
> [8.6.] SCSI information (from /proc/scsi/scsi)
>
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
> Vendor: ATA Model: FUJITSU MHY2160B Rev: 0085
> Type: Direct-Access ANSI SCSI revision: 05
>
> [8.7.] Other information that might be relevant to the problem
> (please look in /proc and include all information that you
> think to be relevant):
> [X.] Other notes, patches, fixes, workarounds:Hello
>
^ permalink raw reply [flat|nested] 5+ messages in thread* [Bug 15283] PROBLEM: kernel 2.6.32-7 will not boot -- could not find /dev/root Dell Vostro 1000
2010-02-12 12:58 [Bug 15283] New: PROBLEM: kernel 2.6.32-7 will not boot -- could not find /dev/root Dell Vostro 1000 bugzilla-daemon
2010-02-12 13:00 ` [Bug 15283] " bugzilla-daemon
2010-02-12 13:13 ` [Bug 15283] New: " James Bottomley
@ 2010-02-12 13:48 ` bugzilla-daemon
2 siblings, 0 replies; 5+ messages in thread
From: bugzilla-daemon @ 2010-02-12 13:48 UTC (permalink / raw)
To: linux-scsi
http://bugzilla.kernel.org/show_bug.cgi?id=15283
--- Comment #2 from Anonymous Emailer <anonymous@kernel-bugs.osdl.org> 2010-02-12 13:48:02 ---
Reply-To: James.Bottomley@suse.de
On Fri, 2010-02-12 at 12:58 +0000, bugzilla-daemon@bugzilla.kernel.org
wrote:
> http://bugzilla.kernel.org/show_bug.cgi?id=15283
Adding cc to linux-ide because this looks to be a SATA controller error
>
> Summary: PROBLEM: kernel 2.6.32-7 will not boot -- could not
> find /dev/root Dell Vostro 1000
> Product: SCSI Drivers
> Version: 2.5
> Kernel Version: 2.6.32-7
> Platform: All
> OS/Version: Linux
> Tree: Mainline
> Status: NEW
> Severity: normal
> Priority: P1
> Component: Other
> AssignedTo: scsi_drivers-other@kernel-bugs.osdl.org
> ReportedBy: imran.javeed@vocalink.com
> Regression: No
>
>
> Created an attachment (id=25002)
--> (http://bugzilla.kernel.org/attachment.cgi?id=25002)
> --> (http://bugzilla.kernel.org/attachment.cgi?id=25002)
> .config file from kernel build
>
> [1.] One line summary of the problem: Upgrade to 2.6.32-7 will not boot(cannot
> recognize disk)
So what they're really going to need to debug this is a boot log showing
the failure, if you could attach one ... without that, you'll have to
hope that someone has a SB600 and can reproduce.
James
> [2.] Full description of the problem/report:
>
> I am trying to upgrade my kernel from 2.6.18-53 to 2.6.32-7, the problem i am
> having is that the 2.6.32 kernel will not recognize my SATA disk. I have a Dell
> Vostro 1000 & have happily been using linux(centos5) with no issues.
>
> Ive ensured the correct options have been set in .config, included libata, ahci
> within the kernel(they are not modules) and checked various other information
> sources on the net, but it still does not work.(this is the 3rd night now &
> still no fix)
>
> Hence my email to you to try & fix for me please?
>
> Attached is the information you require
>
> [3.] Keywords (i.e., modules, networking, kernel):
> SATA SB600 ATI
>
> [4.] Kernel information
> 2.6.32-7
> [4.1.] Kernel version (from /proc/version):
> CURRENT_VERSION == Linux version 2.6.18-53.el5PAE
> (mockbuild@builder6.centos.org) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14))
> #1 SMP Mon Nov 12 02:55:09 EST 2007
>
> [4.2.] Kernel .config file:
> Attached
>
> [5.] Most recent kernel version which did not have the bug:
> That im using right now 2.6.18-53
>
> [6.] Output of Oops.. message (if applicable) with symbolic information
> resolved (see Documentation/oops-tracing.txt) N/A
>
> [7.] A small shell script or example program which triggers the
> problem (if possible)
> N/A
>
> [8.] Environment
>
> [8.1.] Software (add the output of the ver_linux script here) Linux uhud
> 2.6.18-53.el5PAE #1 SMP Mon Nov 12 02:55:09 EST 2007 i686 athlon i386 GNU/Linux
>
> Gnu C 4.1.2
> Gnu make 3.81
> binutils 2.17.50.0.6
> util-linux 2.13-pre7
> mount 2.13-pre7
> module-init-tools 3.3-pre2
> e2fsprogs 1.39
> pcmciautils 014
> quota-tools 3.13.
> PPP 2.4.4
> isdn4k-utils 3.9
> Linux C Library 2.5
> Dynamic linker (ldd) 2.5
> Procps 3.2.7
> Net-tools 1.60
> Kbd 1.12
> oprofile 0.9.2
> Sh-utils 5.97
> udev 095
> wireless-tools 28
> Modules Loaded ndiswrapper bridge vboxnetflt vboxdrv hidp l2cap
> bluetooth configfs sunrpc ip_conntrack_netbios_ns ipt_MASQUERADE iptable_nat
> ip_nat ipt_LOG ipt_REJECT xt_state ip_conntrack nfnetlink xt_multiport
> iptable_filter ip_tables ip6t_REJECT xt_tcpudp ip6table_filter ip6_tables
> x_tables ipv6 cpufreq_ondemand dm_mirror dm_multipath dm_mod video sbs
> backlight i2c_ec button battery asus_acpi ac parport_pc lp parport
> snd_hda_intel snd_hda_codec snd_seq_dummy snd_seq_oss joydev snd_seq_midi_event
> snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss sg snd_pcm ide_cd b44 cdrom
> snd_timer snd i2c_piix4 mii k8_edac i2c_core k8temp edac_mc soundcore hwmon
> serio_raw sdhci mmc_core snd_page_alloc ahci libata sd_mod scsi_mod ext3 jbd
> ehci_hcd ohci_hcd uhci_hcd
>
>
> [8.2.] Processor information (from /proc/cpuinfo):
> processor : 0
> vendor_id : AuthenticAMD
> cpu family : 15
> model : 104
> model name : AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping
> : 2 cpu MHz : 800.000 cache size : 512 KB physical id : 0
> siblings : 2 core id : 0 cpu cores : 2 fdiv_bug :
> no hlt_bug : no f00f_bug : no coma_bug : no fpu
> : yes fpu_exception : yes cpuid level : 1 wp : yes flags
> : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
> pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm
> 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm extapic cr8legacy 3dnowprefetch
> ts fid vid ttp tm stc 100mhzsteps bogomips : 1601.16
>
> processor : 1
> vendor_id : AuthenticAMD
> cpu family : 15
> model : 104
> model name : AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping
> : 2 cpu MHz : 800.000 cache size : 512 KB physical id : 0
> siblings : 2 core id : 1 cpu cores : 2 fdiv_bug :
> no hlt_bug : no f00f_bug : no coma_bug : no fpu
> : yes fpu_exception : yes cpuid level : 1 wp : yes flags
> : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
> pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm
> 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm extapic cr8legacy 3dnowprefetch
> ts fid vid ttp tm stc 100mhzsteps bogomips : 1601.16
>
> [8.3.] Module information (from /proc/modules):
>
> ndiswrapper 169360 0 - Live 0xf9023000
> bridge 53341 0 - Live 0xf8d9b000
> vboxnetflt 79400 0 - Live 0xf8d86000
> vboxdrv 103208 1 vboxnetflt, Live 0xf8d6b000 hidp 23105 2 - Live 0xf8d0d000
> l2cap 29633 5 hidp, Live 0xf8d04000 bluetooth 53925 2 hidp,l2cap, Live
> 0xf8d3e000 configfs 28753 1 - Live 0xf8cfb000 sunrpc 144253 1 - Live 0xf8d19000
> ip_conntrack_netbios_ns 6977 0 - Live 0xf8c84000 ipt_MASQUERADE 7745 3 - Live
> 0xf8c72000 iptable_nat 11205 1 - Live 0xf8ced000 ip_nat 20973 2
> ipt_MASQUERADE,iptable_nat, Live 0xf8cd5000 ipt_LOG 10177 1 - Live 0xf8c78000
> ipt_REJECT 9537 8 - Live 0xf8c7c000 xt_state 6209 7 - Live 0xf8c75000
> ip_conntrack 53025 5
> ip_conntrack_netbios_ns,ipt_MASQUERADE,iptable_nat,ip_nat,xt_state, Live
> 0xf8cc7000 nfnetlink 10713 2 ip_nat,ip_conntrack, Live 0xf8c51000 xt_multiport
> 7233 1 - Live 0xf8c5f000 iptable_filter 7105 1 - Live 0xf8c5c000 ip_tables
> 17029 2 iptable_nat,iptable_filter, Live 0xf8c62000 ip6t_REJECT 9409 1 - Live
> 0xf8c58000 xt_tcpudp 7105 53 - Live 0xf8c55000 ip6table_filter 6849 1 - Live
> 0xf8c3e000 ip6_tables 18181 1 ip6table_filter, Live 0xf8c4b000 x_tables 17349
> 10
> ipt_MASQUERADE,iptable_nat,ipt_LOG,ipt_REJECT,xt_state,xt_multiport,ip_tables,ip
> 6t_REJECT,xt_tcpudp,ip6_tables, Live 0xf8c45000
> ipv6 251393 21 ip6t_REJECT, Live 0xf8c88000 cpufreq_ondemand 10573 1 - Live
> 0xf8a35000 dm_mirror 28869 0 - Live 0xf8a3a000 dm_multipath 21577 0 - Live
> 0xf89ee000 dm_mod 58457 2 dm_mirror,dm_multipath, Live 0xf8a43000 video 19269 0
> - Live 0xf89f5000 sbs 18533 0 - Live 0xf89c2000 backlight 10049 0 - Live
> 0xf89ea000 i2c_ec 9025 1 sbs, Live 0xf89e6000 button 10705 0 - Live 0xf89e2000
> battery 13637 0 - Live 0xf89c8000 asus_acpi 19289 0 - Live 0xf896c000 ac 9157 0
> - Live 0xf8995000 parport_pc 29157 0 - Live 0xf89d9000 lp 15849 0 - Live
> 0xf89ad000 parport 37513 2 parport_pc,lp, Live 0xf89ce000 snd_hda_intel 24025 0
> - Live 0xf89bb000 snd_hda_codec 202689 1 snd_hda_intel, Live 0xf89fd000
> snd_seq_dummy 7877 0 - Live 0xf8992000 snd_seq_oss 32577 0 - Live 0xf89b2000
> joydev 13313 0 - Live 0xf898d000 snd_seq_midi_event 11073 1 snd_seq_oss, Live
> 0xf8989000 snd_seq 49713 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event, Live
> 0xf8999000 snd_seq_device 11725 3 snd_seq_dummy,snd_seq_oss,snd_seq, Live
> 0xf8985000 snd_pcm_oss 42945 0 - Live 0xf893b000 snd_mixer_oss 19009 1
> snd_pcm_oss, Live 0xf8966000 sg 35933 0 - Live 0xf895c000 snd_pcm 72133 3
> snd_hda_intel,snd_hda_codec,snd_pcm_oss, Live 0xf8972000 ide_cd 40033 0 - Live
> 0xf8951000
> b44 29133 0 - Live 0xf891c000
> cdrom 36705 1 ide_cd, Live 0xf8947000
> snd_timer 24645 2 snd_seq,snd_pcm, Live 0xf8925000 snd 52421 9
> snd_hda_intel,snd_hda_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_m
> ixer_oss,snd_pcm,snd_timer, Live 0xf892d000
> i2c_piix4 12237 0 - Live 0xf8902000
> mii 9409 1 b44, Live 0xf88fe000
> k8_edac 18177 0 - Live 0xf8916000
> i2c_core 23745 2 i2c_ec,i2c_piix4, Live 0xf890f000 k8temp 9537 0 - Live
> 0xf88db000 edac_mc 24977 1 k8_edac, Live 0xf8907000 soundcore 11553 1 snd, Live
> 0xf88d7000 hwmon 7365 1 k8temp, Live 0xf88d4000 serio_raw 10693 0 - Live
> 0xf88c8000 sdhci 21337 0 - Live 0xf8846000 mmc_core 27457 1 sdhci, Live
> 0xf88cc000 snd_page_alloc 13769 2 snd_hda_intel,snd_pcm, Live 0xf88be000 ahci
> 23621 2 - Live 0xf885f000 libata 115961 1 ahci, Live 0xf88e0000 sd_mod 24897 3
> - Live 0xf8857000 scsi_mod 132685 3 sg,libata,sd_mod, Live 0xf8879000
> ext3 123337 1 - Live 0xf889e000
> jbd 56553 1 ext3, Live 0xf886a000
> ehci_hcd 33229 0 - Live 0xf884d000
> ohci_hcd 23389 0 - Live 0xf8837000
> uhci_hcd 25549 0 - Live 0xf882f000
>
>
> [8.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
> 000-001f : dma1
> 0020-0021 : pic1
> 0040-0043 : timer0
> 0050-0053 : timer1
> 0060-006f : keyboard
> 0070-0077 : rtc
> 0080-008f : dma page reg
> 00a0-00a1 : pic2
> 00c0-00df : dma2
> 00f0-00ff : fpu
> 01f0-01f7 : ide0
> 0220-022f : pnp 00:08
> 03c0-03df : vga+
> 03f6-03f6 : ide0
> 1080-1080 : motherboard
> 1080-1080 : pnp 00:08
> 8000-805f : motherboard
> 8000-8003 : ACPI PM1a_EVT_BLK
> 8004-8005 : ACPI PM1a_CNT_BLK
> 8008-800b : ACPI PM_TMR
> 8010-8015 : ACPI CPU throttle
> 8020-8027 : ACPI GPE0_BLK
> 8200-8200 : ACPI PM2_CNT_BLK
> 8204-8207 : ACPI PM1b_EVT_BLK
> 8400-840f : 0000:00:12.0
> 8410-841f : 0000:00:14.0
> 8410-8417 : piix4_smbus
> 8420-842f : 0000:00:14.1
> 8420-8427 : ide0
> 8430-8437 : 0000:00:12.0
> 8438-843f : 0000:00:12.0
> 8450-8453 : 0000:00:12.0
> 8454-8457 : 0000:00:12.0
> 9000-9fff : PCI Bus #01
> 9000-90ff : 0000:01:05.0
> ################################
> 00000000-0009dbff : System RAM
> 00000000-00000000 : Crash kernel
> 0009dc00-0009ffff : reserved
> 000a0000-000bffff : Video RAM area
> 000c0000-000ccfff : Video ROM
> 000cd000-000cdfff : Adapter ROM
> 000f0000-000fffff : System ROM
> 00100000-a7e6ffff : System RAM
> 00400000-006075e0 : Kernel code
> 006075e1-006de9bb : Kernel data
> a7e70000-a7e7ffff : ACPI Tables
> a7e80000-a7efffff : ACPI Non-volatile Storage a7f00000-afffffff : reserved
> c0000000-c0003fff : 0000:00:14.2
> c0000000-c0003fff : ICH HD audio
> c0004000-c00043ff : 0000:00:12.0
> c0004000-c00043ff : ahci
> c0004400-c00044ff : 0000:00:13.5
> c0004400-c00044ff : ehci_hcd
> c0005000-c0005fff : 0000:00:13.0
> c0005000-c0005fff : ohci_hcd
> c0006000-c0006fff : 0000:00:13.1
> c0006000-c0006fff : ohci_hcd
> c0007000-c0007fff : 0000:00:13.2
> c0007000-c0007fff : ohci_hcd
> c0008000-c0008fff : 0000:00:13.3
> c0008000-c0008fff : ohci_hcd
> c0009000-c0009fff : 0000:00:13.4
> c0009000-c0009fff : ohci_hcd
> c0100000-c01fffff : PCI Bus #01
> c0100000-c010ffff : 0000:01:05.0
> c0120000-c013ffff : 0000:01:05.0
> c0200000-c02fffff : PCI Bus #05
> c0200000-c0203fff : 0000:05:00.0
> c0200000-c0203fff : ndiswrapper
> c0300000-c03fffff : PCI Bus #08
> c0300000-c0301fff : 0000:08:00.0
> c0300000-c0301fff : b44
> c0302800-c03028ff : 0000:08:01.0
> c0302800-c03028ff : sdhci:slot0
> c0302c00-c0302cff : 0000:08:01.1
> c8000000-cfffffff : PCI Bus #01
> c8000000-cfffffff : 0000:01:05.0
> e0000000-efffffff : reserved
> fec00000-fec0ffff : reserved
> fed00000-fed003ff : 0000:00:14.0
> fee00000-fee00fff : reserved
> fff80000-ffffffff : reserved
> 100000000-14fffffff : System RAM
>
>
>
> [8.5.] PCI information ('lspci -vvv' as root) 00:00.0 Host bridge: ATI
> Technologies Inc RS480 Host Bridge (rev 10)
> Subsystem: Dell Unknown device 022a
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort+ <MAbort+ >SERR- <PERR-
> Latency: 64
>
> 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal
> decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
> I/O behind bridge: 00009000-00009fff
> Memory behind bridge: c0100000-c01fffff
> Prefetchable memory behind bridge: 00000000c8000000-00000000cff00000
> Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
> Capabilities: [44] HyperTransport: MSI Mapping
> Capabilities: [b0] #0d [0000]
>
> 00:05.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal
> decode])
> Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> Latency: 0, Cache Line Size: 32 bytes
> Bus: primary=00, secondary=02, subordinate=04, sec-latency=0
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: fff00000-000fffff
> Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> Capabilities: [50] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] Express Root Port (Slot+) IRQ 0
> Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
> Device: Latency L0s <64ns, L1 <1us
> Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
> Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
> Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 247
> Link: Latency L0s <64ns, L1 <1us
> Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
> Link: Speed 2.5Gb/s, Width x16
> Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
> Slot: Number 0, PowerLimit 0.000000
> Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
> Slot: AttnInd Off, PwrInd Off, Power-
> Root: Correctable- Non-Fatal- Fatal- PME-
> Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0
> Enable-
> Address: 00000000 Data: 0000
> Capabilities: [b0] #0d [0000]
> Capabilities: [b8] HyperTransport: MSI Mapping
>
> 00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal
> decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> Latency: 0, Cache Line Size: 32 bytes
> Bus: primary=00, secondary=05, subordinate=07, sec-latency=0
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: c0200000-c02fffff
> Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> Capabilities: [50] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] Express Root Port (Slot+) IRQ 0
> Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
> Device: Latency L0s <64ns, L1 <1us
> Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
> Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
> Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 3
> Link: Latency L0s <64ns, L1 <1us
> Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
> Link: Speed 2.5Gb/s, Width x1
> Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
> Slot: Number 0, PowerLimit 25.000000
> Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
> Slot: AttnInd Off, PwrInd Off, Power-
> Root: Correctable- Non-Fatal- Fatal- PME-
> Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0
> Enable-
> Address: 00000000 Data: 0000
> Capabilities: [b0] #0d [0000]
> Capabilities: [b8] HyperTransport: MSI Mapping
>
> 00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA (prog-if 01
> [AHCI 1.0])
> Subsystem: Dell Unknown device 022a
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort+
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64
> Interrupt: pin A routed to IRQ 209
> Region 0: I/O ports at 8438 [size=8]
> Region 1: I/O ports at 8454 [size=4]
> Region 2: I/O ports at 8430 [size=8]
> Region 3: I/O ports at 8450 [size=4]
> Region 4: I/O ports at 8400 [size=16]
> Region 5: Memory at c0004000 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [60] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0) (prog-if 10
> [OHCI])
> Subsystem: Dell Unknown device 022a
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 177
> Region 0: Memory at c0005000 (32-bit, non-prefetchable) [size=4K]
>
> 00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1) (prog-if 10
> [OHCI])
> Subsystem: Dell Unknown device 022a
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin B routed to IRQ 185
> Region 0: Memory at c0006000 (32-bit, non-prefetchable) [size=4K]
>
> 00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2) (prog-if 10
> [OHCI])
> Subsystem: Dell Unknown device 022a
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin C routed to IRQ 193
> Region 0: Memory at c0007000 (32-bit, non-prefetchable) [size=4K]
>
> 00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3) (prog-if 10
> [OHCI])
> Subsystem: Dell Unknown device 022a
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin B routed to IRQ 185
> Region 0: Memory at c0008000 (32-bit, non-prefetchable) [size=4K]
>
> 00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4) (prog-if 10
> [OHCI])
> Subsystem: Dell Unknown device 022a
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin C routed to IRQ 193
> Region 0: Memory at c0009000 (32-bit, non-prefetchable) [size=4K]
>
> 00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI)
> (prog-if 20 [EHCI])
> Subsystem: Dell Unknown device 022a
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 64 bytes
> Interrupt: pin D routed to IRQ 201
> Region 0: Memory at c0004400 (32-bit, non-prefetchable) [size=256]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Bridge: PM- B3+
> Capabilities: [e4] Debug port
>
> 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14)
> Subsystem: Dell Unknown device 022a
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Region 0: I/O ports at 8410 [size=16]
> Region 1: Memory at fed00000 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [b0] HyperTransport: MSI Mapping
>
> 00:14.1 IDE interface: ATI Technologies Inc SB600 IDE (prog-if 8a [Master SecP
> PriP])
> Subsystem: Dell Unknown device 022a
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin A routed to IRQ 177
> Region 0: I/O ports at <ignored>
> Region 1: I/O ports at <ignored>
> Region 2: I/O ports at <unassigned>
> Region 3: I/O ports at <unassigned>
> Region 4: I/O ports at 8420 [size=16]
>
> 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia
> Subsystem: Dell Unknown device 022a
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin ? routed to IRQ 177
> Region 0: Memory at c0000000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
> Subsystem: Dell Unknown device 022a
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
>
> 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (prog-if 01
> [Subtractive decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64
> Bus: primary=00, secondary=08, subordinate=0a, sec-latency=64
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: c0300000-c03fffff
> Prefetchable memory behind bridge: fff00000-000fffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>
> 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> HyperTransport Technology Configuration
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> Capabilities: [80] HyperTransport: Host or Secondary Interface
> !!! Possibly incomplete decoding
> Command: WarmRst+ DblEnd-
> Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
> <CRCErr=8
> Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
> Revision ID: 1.02
>
> 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address
> Map
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM
> Controller
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
>
> 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> Miscellaneous Control
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> Capabilities: [f0] #0f [0010]
>
> 01:05.0 VGA compatible controller: ATI Technologies Inc RS482 [Radeon Xpress
> 200] (prog-if 00 [VGA])
> Subsystem: Dell Unknown device 022a
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 255 (2000ns min), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 10
> Region 0: Memory at c8000000 (32-bit, prefetchable) [size=128M]
> Region 1: I/O ports at 9000 [size=256]
> Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
> [virtual] Expansion ROM at c0120000 [disabled] [size=128K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 05:00.0 Network controller: Broadcom Corporation BCM94311MCG wlan mini-PCI (rev
> 01)
> Subsystem: Dell Unknown device 0007
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> Latency: 0, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 193
> Region 0: Memory at c0200000 (32-bit, non-prefetchable) [size=16K]
> Capabilities: [40] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
> Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/0
> Enable-
> Address: 00000000 Data: 0000
> Capabilities: [d0] Express Legacy Endpoint IRQ 0
> Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
> Device: Latency L0s <4us, L1 unlimited
> Device: AtnBtn- AtnInd- PwrInd-
> Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
> Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
> Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
> Link: Latency L0s <4us, L1 <64us
> Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
> Link: Speed 2.5Gb/s, Width x1
> Capabilities: [100] Advanced Error Reporting
> Capabilities: [13c] Virtual Channel
>
> 08:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev
> 02)
> Subsystem: Dell Unknown device 022a
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> Latency: 64
> Interrupt: pin A routed to IRQ 225
> Region 0: Memory at c0300000 (32-bit, non-prefetchable) [size=8K]
> Capabilities: [40] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
> 08:01.0 Class 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev
> 22)
> Subsystem: Dell Unknown device 022a
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin B routed to IRQ 217
> Region 0: Memory at c0302800 (32-bit, non-prefetchable) [size=256]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
> 08:01.1 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
> Subsystem: Dell Unknown device 022a
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin B routed to IRQ 9
> Region 0: Memory at c0302c00 (32-bit, non-prefetchable) [size=256]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
>
> [8.6.] SCSI information (from /proc/scsi/scsi)
>
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
> Vendor: ATA Model: FUJITSU MHY2160B Rev: 0085
> Type: Direct-Access ANSI SCSI revision: 05
>
> [8.7.] Other information that might be relevant to the problem
> (please look in /proc and include all information that you
> think to be relevant):
> [X.] Other notes, patches, fixes, workarounds:Hello
>
--
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.
^ permalink raw reply [flat|nested] 5+ messages in thread
[parent not found: <bug-15283-11613@https.bugzilla.kernel.org/>]
end of thread, other threads:[~2012-06-18 14:48 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-02-12 12:58 [Bug 15283] New: PROBLEM: kernel 2.6.32-7 will not boot -- could not find /dev/root Dell Vostro 1000 bugzilla-daemon
2010-02-12 13:00 ` [Bug 15283] " bugzilla-daemon
2010-02-12 13:13 ` [Bug 15283] New: " James Bottomley
2010-02-12 13:48 ` [Bug 15283] " bugzilla-daemon
[not found] <bug-15283-11613@https.bugzilla.kernel.org/>
2012-06-18 14:48 ` bugzilla-daemon
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).