From: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
To: James Bottomley <James.Bottomley@suse.de>
Cc: linux-scsi@vger.kernel.org, Matthew Wilcox <matthew@wil.cx>
Subject: Re: [PATCH v2] advansys: fix regression with request_firmware change
Date: Mon, 29 Mar 2010 18:22:48 -0300 [thread overview]
Message-ID: <201003291822.49062.herton@mandriva.com.br> (raw)
In-Reply-To: <201003291749.08246.herton@mandriva.com.br>
Em Seg 29 Mar 2010, às 17:49:08, Herton Ronaldo Krzesinski escreveu:
> Em Seg 29 Mar 2010, às 17:36:30, Herton Ronaldo Krzesinski escreveu:
> > Em Dom 28 Mar 2010, às 12:25:20, James Bottomley escreveu:
> > > On Fri, 2010-03-26 at 20:05 -0300, Herton Ronaldo Krzesinski wrote:
>
> <snip>
>
> > > This is both nasty and not really a fix: the overrun buf is still
> > > mapped many times on the reset path and only ever unmapped once, which
> > > is still an unfixed bug in this code. I think the map needs to be moved
> > > out of AscInitMicroCodeVar() to somewhere in here.
> >
> > I didn't want to do this since I think there will be much changes and I can't
> > test properly as I don't have the hardware (also may be too much for what
> > looks like a legacy driver/hardware). But I aggree this if is ugly and not
> > unmapping when needed on reset. What I thought can be better is this, to fix
> > error handling also on AscInitMicroCodeVar then:
>
> Sorry the diff had some typos (didn't test it), but was only for the idea
Damn, and in the diff I also forgot about dma unmap on scsi_add_host error...
please consider version below, also compile tested:
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 9201afe..43289e8 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -460,6 +460,7 @@ typedef struct asc_risc_sg_list_q {
#define ASC_IERR_BIST_PRE_TEST 0x0800 /* BIST pre-test error */
#define ASC_IERR_BIST_RAM_TEST 0x1000 /* BIST RAM test error */
#define ASC_IERR_BAD_CHIPTYPE 0x2000 /* Invalid chip_type setting */
+#define ASC_IERR_DMA_MAP_SINGLE 0x4000 /* Error with dma_map_single */
#define ASC_DEF_MAX_TOTAL_QNG (0xF0)
#define ASC_MIN_TAG_Q_PER_DVC (0x04)
@@ -4701,14 +4702,12 @@ static void AscInitQLinkVar(ASC_DVC_VAR *asc_dvc)
static ushort AscInitMicroCodeVar(ASC_DVC_VAR *asc_dvc)
{
int i;
- ushort warn_code;
PortAddr iop_base;
ASC_PADDR phy_addr;
ASC_DCNT phy_size;
struct asc_board *board = asc_dvc_to_board(asc_dvc);
iop_base = asc_dvc->iop_base;
- warn_code = 0;
for (i = 0; i <= ASC_MAX_TID; i++) {
AscPutMCodeInitSDTRAtID(iop_base, i,
asc_dvc->cfg->sdtr_period_offset[i]);
@@ -4724,6 +4723,10 @@ static ushort AscInitMicroCodeVar(ASC_DVC_VAR *asc_dvc)
BUG_ON((unsigned long)asc_dvc->overrun_buf & 7);
asc_dvc->overrun_dma = dma_map_single(board->dev, asc_dvc->overrun_buf,
ASC_OVERRUN_BSIZE, DMA_FROM_DEVICE);
+ if (dma_mapping_error(board->dev, asc_dvc->overrun_dma)) {
+ asc_dvc->err_code |= ASC_IERR_DMA_MAP_SINGLE;
+ return -ENOMEM;
+ }
phy_addr = cpu_to_le32(asc_dvc->overrun_dma);
AscMemDWordCopyPtrToLram(iop_base, ASCV_OVERRUN_PADDR_D,
(uchar *)&phy_addr, 1);
@@ -4739,14 +4742,19 @@ static ushort AscInitMicroCodeVar(ASC_DVC_VAR *asc_dvc)
AscSetPCAddr(iop_base, ASC_MCODE_START_ADDR);
if (AscGetPCAddr(iop_base) != ASC_MCODE_START_ADDR) {
asc_dvc->err_code |= ASC_IERR_SET_PC_ADDR;
- return warn_code;
+ goto err_mcode_start;
}
if (AscStartChip(iop_base) != 1) {
asc_dvc->err_code |= ASC_IERR_START_STOP_CHIP;
- return warn_code;
+ goto err_mcode_start;
}
- return warn_code;
+ return 0;
+
+err_mcode_start:
+ dma_unmap_single(board->dev, asc_dvc->overrun_dma,
+ ASC_OVERRUN_BSIZE, DMA_FROM_DEVICE);
+ return UW_ERR;
}
static ushort AscInitAsc1000Driver(ASC_DVC_VAR *asc_dvc)
@@ -4802,6 +4810,8 @@ static ushort AscInitAsc1000Driver(ASC_DVC_VAR *asc_dvc)
}
release_firmware(fw);
warn_code |= AscInitMicroCodeVar(asc_dvc);
+ if (asc_dvc->err_code != 0)
+ return warn_code;
asc_dvc->init_state |= ASC_INIT_STATE_END_LOAD_MC;
AscEnableInterrupt(iop_base);
return warn_code;
@@ -12311,7 +12321,7 @@ static int __devinit advansys_board_found(struct Scsi_Host *shost,
asc_dvc_varp->overrun_buf = kzalloc(ASC_OVERRUN_BSIZE, GFP_KERNEL);
if (!asc_dvc_varp->overrun_buf) {
ret = -ENOMEM;
- goto err_free_wide_mem;
+ goto err_free_irq;
}
warn_code = AscInitAsc1000Driver(asc_dvc_varp);
@@ -12323,27 +12333,34 @@ static int __devinit advansys_board_found(struct Scsi_Host *shost,
if (asc_dvc_varp->err_code) {
ret = -ENODEV;
kfree(asc_dvc_varp->overrun_buf);
+ goto err_free_irq;
}
}
} else {
- if (advansys_wide_init_chip(shost))
+ if (advansys_wide_init_chip(shost)) {
ret = -ENODEV;
+ advansys_wide_free_mem(boardp);
+ goto err_free_irq;
+ }
}
- if (ret)
- goto err_free_wide_mem;
-
ASC_DBG_PRT_SCSI_HOST(2, shost);
ret = scsi_add_host(shost, boardp->dev);
if (ret)
- goto err_free_wide_mem;
+ goto err_add_host;
scsi_scan_host(shost);
return 0;
- err_free_wide_mem:
- advansys_wide_free_mem(boardp);
+ err_add_host:
+ if (ASC_NARROW_BOARD(boardp)) {
+ dma_unmap_single(boardp->dev, asc_dvc_varp->overrun_dma,
+ ASC_OVERRUN_BSIZE, DMA_FROM_DEVICE);
+ kfree(asc_dvc_varp->overrun_buf);
+ } else
+ advansys_wide_free_mem(boardp);
+ err_free_irq:
free_irq(boardp->irq, shost);
err_free_dma:
#ifdef CONFIG_ISA
--
[]'s
Herton
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2010-03-29 21:22 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-26 23:05 [PATCH v2] advansys: fix regression with request_firmware change Herton Ronaldo Krzesinski
2010-03-28 15:25 ` James Bottomley
2010-03-29 20:36 ` Herton Ronaldo Krzesinski
2010-03-29 20:49 ` Herton Ronaldo Krzesinski
2010-03-29 21:22 ` Herton Ronaldo Krzesinski [this message]
2010-03-29 23:16 ` James Bottomley
2010-03-30 16:35 ` Herton Ronaldo Krzesinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201003291822.49062.herton@mandriva.com.br \
--to=herton@mandriva.com.br \
--cc=James.Bottomley@suse.de \
--cc=linux-scsi@vger.kernel.org \
--cc=matthew@wil.cx \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox