public inbox for linux-scsi@vger.kernel.org
 help / color / mirror / Atom feed
From: Robert Love <robert.w.love@intel.com>
To: James.Bottomley@suse.de, linux-scsi@vger.kernel.org
Cc: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Subject: [PATCH 13/17] libfcoe: Check for order and missing critical descriptors for FIP ELS requests
Date: Fri, 11 Jun 2010 16:44:36 -0700	[thread overview]
Message-ID: <20100611234436.4616.72173.stgit@localhost.localdomain> (raw)
In-Reply-To: <20100611234328.4616.95199.stgit@localhost.localdomain>

From: Bhanu Prakash Gollapudi <bprakash@broadcom.com>

As per FC-BB-5 rev.2, section 7.8.7.1, strict ordering of FIP descriptors
is required for ELS requests. Also, look for missing and duplicate critical
descriptors.

Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
---
 drivers/scsi/fcoe/libfcoe.c |   31 ++++++++++++++++++++++++++++---
 1 files changed, 28 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c
index ce651ca..f009191 100644
--- a/drivers/scsi/fcoe/libfcoe.c
+++ b/drivers/scsi/fcoe/libfcoe.c
@@ -871,7 +871,8 @@ static void fcoe_ctlr_recv_els(struct fcoe_ctlr *fip, struct sk_buff *skb)
 	size_t els_len = 0;
 	size_t rlen;
 	size_t dlen;
-	u32 dupl_desc = 0;
+	u32 desc_mask = 0;
+	u32 desc_cnt = 0;
 
 	fiph = (struct fip_header *)skb->data;
 	sub = fiph->fip_subcode;
@@ -884,20 +885,27 @@ static void fcoe_ctlr_recv_els(struct fcoe_ctlr *fip, struct sk_buff *skb)
 
 	desc = (struct fip_desc *)(fiph + 1);
 	while (rlen > 0) {
+		desc_cnt++;
 		dlen = desc->fip_dlen * FIP_BPW;
 		if (dlen < sizeof(*desc) || dlen > rlen)
 			goto drop;
 		/* Drop ELS if there are duplicate critical descriptors */
 		if (desc->fip_dtype < 32) {
-			if (dupl_desc & 1U << desc->fip_dtype) {
+			if (desc_mask & 1U << desc->fip_dtype) {
 				LIBFCOE_FIP_DBG(fip, "Duplicate Critical "
 						"Descriptors in FIP ELS\n");
 				goto drop;
 			}
-			dupl_desc |= (1 << desc->fip_dtype);
+			desc_mask |= (1 << desc->fip_dtype);
 		}
 		switch (desc->fip_dtype) {
 		case FIP_DT_MAC:
+			if (desc_cnt == 1) {
+				LIBFCOE_FIP_DBG(fip, "FIP descriptors "
+						"received out of order\n");
+				goto drop;
+			}
+
 			if (dlen != sizeof(struct fip_mac_desc))
 				goto len_err;
 			memcpy(granted_mac,
@@ -914,6 +922,11 @@ static void fcoe_ctlr_recv_els(struct fcoe_ctlr *fip, struct sk_buff *skb)
 		case FIP_DT_FDISC:
 		case FIP_DT_LOGO:
 		case FIP_DT_ELP:
+			if (desc_cnt != 1) {
+				LIBFCOE_FIP_DBG(fip, "FIP descriptors "
+						"received out of order\n");
+				goto drop;
+			}
 			if (fh)
 				goto drop;
 			if (dlen < sizeof(*els) + sizeof(*fh) + 1)
@@ -929,6 +942,11 @@ static void fcoe_ctlr_recv_els(struct fcoe_ctlr *fip, struct sk_buff *skb)
 			/* standard says ignore unknown descriptors >= 128 */
 			if (desc->fip_dtype < FIP_DT_VENDOR_BASE)
 				goto drop;
+			if (desc_cnt <= 2) {
+				LIBFCOE_FIP_DBG(fip, "FIP descriptors "
+						"received out of order\n");
+				goto drop;
+			}
 			break;
 		}
 		desc = (struct fip_desc *)((char *)desc + dlen);
@@ -944,6 +962,13 @@ static void fcoe_ctlr_recv_els(struct fcoe_ctlr *fip, struct sk_buff *skb)
 	    els_op == ELS_LS_ACC && is_valid_ether_addr(granted_mac))
 		fip->flogi_oxid = FC_XID_UNKNOWN;
 
+	if ((desc_cnt == 0) || ((els_op != ELS_LS_RJT) &&
+	    (!(1U << FIP_DT_MAC & desc_mask)))) {
+		LIBFCOE_FIP_DBG(fip, "Missing critical descriptors "
+				"in FIP ELS\n");
+		goto drop;
+	}
+
 	/*
 	 * Convert skb into an fc_frame containing only the ELS.
 	 */


  parent reply	other threads:[~2010-06-11 23:44 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-06-11 23:43 [PATCH 00/17] libfc, libfcoe and fcoe fixes Robert Love
2010-06-11 23:43 ` [PATCH 01/17] libfcoe: FIP link keep-alive should continue while logged off Robert Love
2010-06-11 23:43 ` [PATCH 02/17] libfcoe: Avoid hang when receiving non-critical descriptors Robert Love
2010-06-11 23:43 ` [PATCH 03/17] libfcoe: No solicitation if adv is dropped Robert Love
2010-06-11 23:43 ` [PATCH 04/17] libfc: Retry a rejected PRLI request Robert Love
2010-06-11 23:43 ` [PATCH 05/17] libfc: Honor LS_ACC response codes for PRLI Robert Love
2010-06-11 23:43 ` [PATCH 06/17] fcoe: clean up TBD comments in FCoE prototype header Robert Love
2010-06-11 23:44 ` [PATCH 07/17] libfc: Handle unsolicited PRLO request Robert Love
2010-06-11 23:44 ` [PATCH 08/17] libfcoe: fix lenient aging of FCF advertisements Robert Love
2010-06-11 23:44 ` [PATCH 09/17] libfcoe: Use fka_period as periodic timeouts to age out fcf if Robert Love
2010-06-11 23:44 ` [PATCH 10/17] libfcoe: update FIP FCF D flag from advertisments Robert Love
2010-06-11 23:44 ` [PATCH 11/17] libfcoe: Handle duplicate critical descriptors Robert Love
2010-06-11 23:44 ` [PATCH 12/17] libfcoe: Host doesnt handle CVL to NPIV ports Robert Love
2010-06-11 23:44 ` Robert Love [this message]
2010-06-11 23:44 ` [PATCH 14/17] libfc: lport state is enum not bit mask Robert Love
2010-06-11 23:44 ` [PATCH 15/17] fnic: drivers/scsi/fnic/fnic_scsi.c: clean up Robert Love
2010-06-11 23:44 ` [PATCH 16/17] libfc: Fix remote port restart problem Robert Love
2010-06-11 23:44 ` [PATCH 17/17] libfc: fix indefinite rport restart Robert Love

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100611234436.4616.72173.stgit@localhost.localdomain \
    --to=robert.w.love@intel.com \
    --cc=James.Bottomley@suse.de \
    --cc=bprakash@broadcom.com \
    --cc=linux-scsi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox