[PATCH 3/9] hpsa: make hpsa_find_memory_BAR not require the per HBA structure.

["Stephen M. Cameron" <scameron@beardog.cce.hp.com>]

From: Stephen M. Cameron <scameron@beardog.cce.hp.com>

Rationale for this is that in order to fix the hard reset code used
by kdump, we need to use this function before we even have the per
HBA structure.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
---
 drivers/scsi/hpsa.c |   12 ++++++------
 1 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 661a320..1decf16 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -3313,20 +3313,20 @@ static inline bool hpsa_board_disabled(struct pci_dev *pdev)
 	return ((command & PCI_COMMAND_MEMORY) == 0);
 }
 
-static int __devinit hpsa_pci_find_memory_BAR(struct ctlr_info *h,
+static int __devinit hpsa_pci_find_memory_BAR(struct pci_dev *pdev,
 	unsigned long *memory_bar)
 {
 	int i;
 
 	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++)
-		if (pci_resource_flags(h->pdev, i) & IORESOURCE_MEM) {
+		if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) {
 			/* addressing mode bits already removed */
-			*memory_bar = pci_resource_start(h->pdev, i);
-			dev_dbg(&h->pdev->dev, "memory BAR = %lx\n",
+			*memory_bar = pci_resource_start(pdev, i);
+			dev_dbg(&pdev->dev, "memory BAR = %lx\n",
 				*memory_bar);
 			return 0;
 		}
-	dev_warn(&h->pdev->dev, "no memory BAR found\n");
+	dev_warn(&pdev->dev, "no memory BAR found\n");
 	return -ENODEV;
 }
 
@@ -3503,7 +3503,7 @@ static int __devinit hpsa_pci_init(struct ctlr_info *h)
 		return err;
 	}
 	hpsa_interrupt_mode(h);
-	err = hpsa_pci_find_memory_BAR(h, &h->paddr);
+	err = hpsa_pci_find_memory_BAR(h->pdev, &h->paddr);
 	if (err)
 		goto err_out_free_res;
 	h->vaddr = remap_pci_mem(h->paddr, 0x250);