From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
To: linux-scsi@vger.kernel.org
Cc: andriusb@redhat.com, James.Bottomley@HansenPartnership.com,
dab@hp.com, thenzl@redhat.com, mikem@beardog.cce.hp.com
Subject: [PATCH 4/9] hpsa: factor out hpsa_find_cfg_addrs.
Date: Wed, 16 Jun 2010 13:51:30 -0500 [thread overview]
Message-ID: <20100616185130.22798.45439.stgit@beardog.cce.hp.com> (raw)
In-Reply-To: <20100616184510.22798.26206.stgit@beardog.cce.hp.com>
From: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Rationale for this is that I will also need to use this code
in fixing kdump host reset code prior to having the hba structure.
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
---
drivers/scsi/hpsa.c | 34 ++++++++++++++++++++++------------
1 files changed, 22 insertions(+), 12 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 1decf16..67439c1 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -3345,29 +3345,39 @@ static int __devinit hpsa_wait_for_board_ready(struct ctlr_info *h)
return -ENODEV;
}
+static int __devinit hpsa_find_cfg_addrs(struct pci_dev *pdev,
+ void __iomem *vaddr, u32 *cfg_base_addr, u64 *cfg_base_addr_index,
+ u64 *cfg_offset)
+{
+ *cfg_base_addr = readl(vaddr + SA5_CTCFG_OFFSET);
+ *cfg_offset = readl(vaddr + SA5_CTMEM_OFFSET);
+ *cfg_base_addr &= (u32) 0x0000ffff;
+ *cfg_base_addr_index = find_PCI_BAR_index(pdev, *cfg_base_addr);
+ if (*cfg_base_addr_index == -1) {
+ dev_warn(&pdev->dev, "cannot find cfg_base_addr_index\n");
+ return -ENODEV;
+ }
+ return 0;
+}
+
static int __devinit hpsa_find_cfgtables(struct ctlr_info *h)
{
u64 cfg_offset;
u32 cfg_base_addr;
u64 cfg_base_addr_index;
u32 trans_offset;
+ int rc;
- /* get the address index number */
- cfg_base_addr = readl(h->vaddr + SA5_CTCFG_OFFSET);
- cfg_base_addr &= (u32) 0x0000ffff;
- cfg_base_addr_index = find_PCI_BAR_index(h->pdev, cfg_base_addr);
- if (cfg_base_addr_index == -1) {
- dev_warn(&h->pdev->dev, "cannot find cfg_base_addr_index\n");
- return -ENODEV;
- }
- cfg_offset = readl(h->vaddr + SA5_CTMEM_OFFSET);
+ rc = hpsa_find_cfg_addrs(h->pdev, h->vaddr, &cfg_base_addr,
+ &cfg_base_addr_index, &cfg_offset);
+ if (rc)
+ return rc;
h->cfgtable = remap_pci_mem(pci_resource_start(h->pdev,
- cfg_base_addr_index) + cfg_offset,
- sizeof(h->cfgtable));
+ cfg_base_addr_index) + cfg_offset, sizeof(*h->cfgtable));
if (!h->cfgtable)
return -ENOMEM;
/* Find performant mode table. */
- trans_offset = readl(&(h->cfgtable->TransMethodOffset));
+ trans_offset = readl(&h->cfgtable->TransMethodOffset);
h->transtable = remap_pci_mem(pci_resource_start(h->pdev,
cfg_base_addr_index)+cfg_offset+trans_offset,
sizeof(*h->transtable));
next prev parent reply other threads:[~2010-06-16 18:46 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-16 18:51 [PATCH 0/9] hpsa driver updates June 16, 2010 Stephen M. Cameron
2010-06-16 18:51 ` [PATCH 1/9] hpsa: add new controllers Stephen M. Cameron
2010-06-16 18:51 ` [PATCH 2/9] hpsa: Make "hpsa_allow_any=1" boot param enable Compaq Smart Arrays Stephen M. Cameron
2010-06-16 18:51 ` [PATCH 3/9] hpsa: make hpsa_find_memory_BAR not require the per HBA structure Stephen M. Cameron
2010-06-16 18:51 ` Stephen M. Cameron [this message]
2010-06-16 18:51 ` [PATCH 5/9] hpsa: factor out the code to reset controllers on driver load Stephen M. Cameron
2010-06-16 18:51 ` [PATCH 6/9] hpsa: Fix hard reset code Stephen M. Cameron
2010-06-16 18:51 ` [PATCH 7/9] hpsa: forbid hard reset of 640x boards Stephen M. Cameron
2010-06-16 18:51 ` [PATCH 8/9] hpsa: separate intx and msi/msix interrupt handlers Stephen M. Cameron
2010-06-16 18:51 ` [PATCH 9/9] hpsa: sanitize max commands Stephen M. Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100616185130.22798.45439.stgit@beardog.cce.hp.com \
--to=scameron@beardog.cce.hp.com \
--cc=James.Bottomley@HansenPartnership.com \
--cc=andriusb@redhat.com \
--cc=dab@hp.com \
--cc=linux-scsi@vger.kernel.org \
--cc=mikem@beardog.cce.hp.com \
--cc=thenzl@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox