From: Robert Love <robert.w.love@intel.com>
To: James.Bottomley@suse.de, linux-scsi@vger.kernel.org
Cc: Bart Van Assche <bart.vanassche@gmail.com>, jeykholt@cisco.com
Subject: [PATCH 02/28] fcoe: make it possible to verify fcoe with sparse
Date: Tue, 20 Jul 2010 15:19:15 -0700 [thread overview]
Message-ID: <20100720221915.17116.93752.stgit@localhost.localdomain> (raw)
In-Reply-To: <20100720221904.17116.78553.stgit@localhost.localdomain>
From: Bart Van Assche <bvanassche@acm.org>
Analyzing fcoe with sparse currently fails. This is because struct
fcoe_rcv_info contains two enum members that have been declared with
__attribute__((packed)). Apparently gcc honors this attribute while sparse
ignores it. The result is that sizeof(struct fcoe_rcv_info)
== sizeof(struct sk_buff::cb) == 48 on a 64-bit system according to gcc, but
not according to sparse. The patch below modifies the definition of
struct fcoe_rcv_info such that gcc and sparse interpret this structure
definition in the same way. The current sparse output is as follows:
$ cd linux-2.6.34
$ make C=2 M=drivers/scsi/fcoe modules
CHECK drivers/scsi/fcoe/fcoe.c
include/scsi/fc_frame.h:81:9: error: invalid bitfield width, -1.
CC [M] drivers/scsi/fcoe/fcoe.o
CHECK drivers/scsi/fcoe/libfcoe.c
include/scsi/fc_frame.h:81:9: error: invalid bitfield width, -1.
drivers/scsi/fcoe/libfcoe.c:56:37: error: invalid initializer
Signed-off-by: Bart Van Assche <bart.vanassche@gmail.com>
Cc: jeykholt@cisco.com
Signed-off-by: Robert Love <robert.w.love@intel.com>
---
include/scsi/fc_frame.h | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/scsi/fc_frame.h b/include/scsi/fc_frame.h
index 4d3e9c7..15427fa 100644
--- a/include/scsi/fc_frame.h
+++ b/include/scsi/fc_frame.h
@@ -66,8 +66,8 @@ struct fcoe_rcv_info {
struct fc_fcp_pkt *fr_fsp; /* for the corresponding fcp I/O */
u32 fr_crc;
u16 fr_max_payload; /* max FC payload */
- enum fc_sof fr_sof; /* start of frame delimiter */
- enum fc_eof fr_eof; /* end of frame delimiter */
+ u8 fr_sof; /* start of frame delimiter */
+ u8 fr_eof; /* end of frame delimiter */
u8 fr_flags; /* flags - see below */
u8 granted_mac[ETH_ALEN]; /* FCoE MAC address */
};
next prev parent reply other threads:[~2010-07-20 22:19 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-20 22:19 [PATCH 00/28] libfc, libfcoe and fcoe updates for scsi-misc Robert Love
2010-07-20 22:19 ` [PATCH 01/28] libfc: fix slowpath error from WARN_ON in fc_fcp_send_data Robert Love
2010-07-20 22:19 ` Robert Love [this message]
2010-07-20 22:19 ` [PATCH 03/28] libfc: IO errors on link down due to cable unplug Robert Love
2010-07-21 3:29 ` Mike Christie
2010-07-27 21:32 ` Vasu Dev
2010-07-27 22:08 ` Mike Christie
2010-07-28 7:32 ` Mike Christie
2010-07-30 20:34 ` Vasu Dev
2010-07-20 22:19 ` [PATCH 04/28] fcoe: cleans up fcoe_disable and fcoe_enable Robert Love
2010-07-20 22:19 ` [PATCH 05/28] fcoe: adds src and dest mac address checking for fcoe frames Robert Love
2010-07-20 22:19 ` [PATCH 06/28] libfc: convert rport lookup to be RCU safe Robert Love
2010-07-20 22:19 ` [PATCH 07/28] libfc: provide space for LLD after remote port structure Robert Love
2010-07-20 22:19 ` [PATCH 08/28] libfcoe: convert FIP to lock with mutex instead of spin lock Robert Love
2010-07-20 22:19 ` [PATCH 09/28] libfc: add discovery-private pointer for LLD Robert Love
2010-07-20 22:19 ` [PATCH 10/28] libfcoe: fcoe: fnic: change fcoe_ctlr_init interface to specify mode Robert Love
2010-07-20 22:20 ` [PATCH 11/28] libfc: Add local port point-to-multipoint flag Robert Love
2010-07-20 22:20 ` [PATCH 12/28] libfc: add FLOGI state to rport for VN2VN Robert Love
2010-07-20 22:20 ` [PATCH 13/28] libfc: track FIP exchanges Robert Love
2010-07-20 22:20 ` [PATCH 14/28] libfcoe: add protocol description of FIP VN2VN mode Robert Love
2010-07-20 22:20 ` [PATCH 15/28] libfcoe: add state change debugging Robert Love
2010-07-20 22:20 ` [PATCH 16/28] libfcoe: fcoe: fnic: add FIP VN2VN point-to-multipoint support Robert Love
2010-07-20 22:20 ` [PATCH 17/28] libfcoe: Fix FIP ELS encapsulation details for FLOGI responses Robert Love
2010-07-20 22:20 ` [PATCH 18/28] fcoe libfcoe: use correct FC-MAP for VN2VN mode Robert Love
2010-07-20 22:20 ` [PATCH 19/28] fcoe: config via separate create_vn2vn module parameter Robert Love
2010-07-20 22:20 ` [PATCH 20/28] libfc: eliminate rport LOGO state Robert Love
2010-07-20 22:20 ` [PATCH 21/28] libfc: add fc_frame_sid() and fc_frame_did() functions Robert Love
2010-07-20 22:21 ` [PATCH 22/28] libfc: add fc_fill_reply_hdr() and fc_fill_hdr() Robert Love
2010-07-20 22:21 ` [PATCH 23/28] libfc: add interface to allocate a sequence for incoming requests Robert Love
2010-07-20 22:21 ` [PATCH 24/28] libfc: don't require a local exchange " Robert Love
2010-07-20 22:21 ` [PATCH 25/28] fcoe: fix offload feature flag change from netdev Robert Love
2010-07-20 22:21 ` [PATCH 26/28] Revert "[SCSI] fcoe: Fix using VLAN ID in creating lport's WWWN/WWPN" Robert Love
2010-07-20 22:21 ` [PATCH 27/28] libfc: Add retry logic to lport state machine when receiving LS_RJT Robert Love
2010-07-20 22:21 ` [PATCH 28/28] fcoe: remove check for zero fabric name Robert Love
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100720221915.17116.93752.stgit@localhost.localdomain \
--to=robert.w.love@intel.com \
--cc=James.Bottomley@suse.de \
--cc=bart.vanassche@gmail.com \
--cc=jeykholt@cisco.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).