From: Robert Love <robert.w.love@intel.com>
To: James.Bottomley@suse.de, linux-scsi@vger.kernel.org
Cc: Joe Eykholt <jeykholt@cisco.com>
Subject: [PATCH 17/28] libfcoe: Fix FIP ELS encapsulation details for FLOGI responses
Date: Tue, 20 Jul 2010 15:20:35 -0700 [thread overview]
Message-ID: <20100720222035.17116.66903.stgit@localhost.localdomain> (raw)
In-Reply-To: <20100720221904.17116.78553.stgit@localhost.localdomain>
From: Joe Eykholt <jeykholt@cisco.com>
When sending a FLOGI LS_ACC, which we only do in point-to-multipoint
mode, the MAC descriptor should have the granted MAC set to
0x0efd00 || D_ID.
When sending an LS_RJT, there should be no MAC descriptor.
When sending either an LS_ACC or LS_RJT, the subcode should indicate
an reply, not a request.
Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
---
drivers/scsi/fcoe/libfcoe.c | 42 ++++++++++++++++++++++++++++--------------
1 files changed, 28 insertions(+), 14 deletions(-)
diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c
index 79df78f..4865e81 100644
--- a/drivers/scsi/fcoe/libfcoe.c
+++ b/drivers/scsi/fcoe/libfcoe.c
@@ -469,11 +469,15 @@ static int fcoe_ctlr_encaps(struct fcoe_ctlr *fip, struct fc_lport *lport,
struct fip_header fip;
struct fip_encaps encaps;
} __attribute__((packed)) *cap;
+ struct fc_frame_header *fh;
struct fip_mac_desc *mac;
struct fcoe_fcf *fcf;
size_t dlen;
u16 fip_flags;
+ u8 op;
+ fh = (struct fc_frame_header *)skb->data;
+ op = *(u8 *)(fh + 1);
dlen = sizeof(struct fip_encaps) + skb->len; /* len before push */
cap = (struct fip_encaps_head *)skb_push(skb, sizeof(*cap));
memset(cap, 0, sizeof(*cap));
@@ -481,6 +485,7 @@ static int fcoe_ctlr_encaps(struct fcoe_ctlr *fip, struct fc_lport *lport,
if (lport->point_to_multipoint) {
if (fcoe_ctlr_vn_lookup(fip, d_id, cap->eth.h_dest))
return -ENODEV;
+ fip_flags = 0;
} else {
fcf = fip->sel_fcf;
if (!fcf)
@@ -497,26 +502,35 @@ static int fcoe_ctlr_encaps(struct fcoe_ctlr *fip, struct fc_lport *lport,
cap->fip.fip_ver = FIP_VER_ENCAPS(FIP_VER);
cap->fip.fip_op = htons(FIP_OP_LS);
- cap->fip.fip_subcode = FIP_SC_REQ;
- cap->fip.fip_dl_len = htons((dlen + sizeof(*mac)) / FIP_BPW);
+ if (op == ELS_LS_ACC || op == ELS_LS_RJT)
+ cap->fip.fip_subcode = FIP_SC_REP;
+ else
+ cap->fip.fip_subcode = FIP_SC_REQ;
cap->fip.fip_flags = htons(fip_flags);
cap->encaps.fd_desc.fip_dtype = dtype;
cap->encaps.fd_desc.fip_dlen = dlen / FIP_BPW;
- mac = (struct fip_mac_desc *)skb_put(skb, sizeof(*mac));
- memset(mac, 0, sizeof(*mac));
- mac->fd_desc.fip_dtype = FIP_DT_MAC;
- mac->fd_desc.fip_dlen = sizeof(*mac) / FIP_BPW;
- if (dtype != FIP_DT_FLOGI && dtype != FIP_DT_FDISC) {
- memcpy(mac->fd_mac, fip->get_src_addr(lport), ETH_ALEN);
- } else if (fip_flags & FIP_FL_SPMA) {
- LIBFCOE_FIP_DBG(fip, "FLOGI/FDISC sent with SPMA\n");
- memcpy(mac->fd_mac, fip->ctl_src_addr, ETH_ALEN);
- } else {
- LIBFCOE_FIP_DBG(fip, "FLOGI/FDISC sent with FPMA\n");
- /* FPMA only FLOGI must leave the MAC desc set to all 0s */
+ if (op != ELS_LS_RJT) {
+ dlen += sizeof(*mac);
+ mac = (struct fip_mac_desc *)skb_put(skb, sizeof(*mac));
+ memset(mac, 0, sizeof(*mac));
+ mac->fd_desc.fip_dtype = FIP_DT_MAC;
+ mac->fd_desc.fip_dlen = sizeof(*mac) / FIP_BPW;
+ if (dtype != FIP_DT_FLOGI && dtype != FIP_DT_FDISC) {
+ memcpy(mac->fd_mac, fip->get_src_addr(lport), ETH_ALEN);
+ } else if (fip->mode == FIP_MODE_VN2VN) {
+ hton24(mac->fd_mac, FIP_VN_FC_MAP);
+ hton24(mac->fd_mac + 3, fip->port_id);
+ } else if (fip_flags & FIP_FL_SPMA) {
+ LIBFCOE_FIP_DBG(fip, "FLOGI/FDISC sent with SPMA\n");
+ memcpy(mac->fd_mac, fip->ctl_src_addr, ETH_ALEN);
+ } else {
+ LIBFCOE_FIP_DBG(fip, "FLOGI/FDISC sent with FPMA\n");
+ /* FPMA only FLOGI. Must leave the MAC desc zeroed. */
+ }
}
+ cap->fip.fip_dl_len = htons(dlen / FIP_BPW);
skb->protocol = htons(ETH_P_FIP);
skb_reset_mac_header(skb);
next prev parent reply other threads:[~2010-07-20 22:20 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-20 22:19 [PATCH 00/28] libfc, libfcoe and fcoe updates for scsi-misc Robert Love
2010-07-20 22:19 ` [PATCH 01/28] libfc: fix slowpath error from WARN_ON in fc_fcp_send_data Robert Love
2010-07-20 22:19 ` [PATCH 02/28] fcoe: make it possible to verify fcoe with sparse Robert Love
2010-07-20 22:19 ` [PATCH 03/28] libfc: IO errors on link down due to cable unplug Robert Love
2010-07-21 3:29 ` Mike Christie
2010-07-27 21:32 ` Vasu Dev
2010-07-27 22:08 ` Mike Christie
2010-07-28 7:32 ` Mike Christie
2010-07-30 20:34 ` Vasu Dev
2010-07-20 22:19 ` [PATCH 04/28] fcoe: cleans up fcoe_disable and fcoe_enable Robert Love
2010-07-20 22:19 ` [PATCH 05/28] fcoe: adds src and dest mac address checking for fcoe frames Robert Love
2010-07-20 22:19 ` [PATCH 06/28] libfc: convert rport lookup to be RCU safe Robert Love
2010-07-20 22:19 ` [PATCH 07/28] libfc: provide space for LLD after remote port structure Robert Love
2010-07-20 22:19 ` [PATCH 08/28] libfcoe: convert FIP to lock with mutex instead of spin lock Robert Love
2010-07-20 22:19 ` [PATCH 09/28] libfc: add discovery-private pointer for LLD Robert Love
2010-07-20 22:19 ` [PATCH 10/28] libfcoe: fcoe: fnic: change fcoe_ctlr_init interface to specify mode Robert Love
2010-07-20 22:20 ` [PATCH 11/28] libfc: Add local port point-to-multipoint flag Robert Love
2010-07-20 22:20 ` [PATCH 12/28] libfc: add FLOGI state to rport for VN2VN Robert Love
2010-07-20 22:20 ` [PATCH 13/28] libfc: track FIP exchanges Robert Love
2010-07-20 22:20 ` [PATCH 14/28] libfcoe: add protocol description of FIP VN2VN mode Robert Love
2010-07-20 22:20 ` [PATCH 15/28] libfcoe: add state change debugging Robert Love
2010-07-20 22:20 ` [PATCH 16/28] libfcoe: fcoe: fnic: add FIP VN2VN point-to-multipoint support Robert Love
2010-07-20 22:20 ` Robert Love [this message]
2010-07-20 22:20 ` [PATCH 18/28] fcoe libfcoe: use correct FC-MAP for VN2VN mode Robert Love
2010-07-20 22:20 ` [PATCH 19/28] fcoe: config via separate create_vn2vn module parameter Robert Love
2010-07-20 22:20 ` [PATCH 20/28] libfc: eliminate rport LOGO state Robert Love
2010-07-20 22:20 ` [PATCH 21/28] libfc: add fc_frame_sid() and fc_frame_did() functions Robert Love
2010-07-20 22:21 ` [PATCH 22/28] libfc: add fc_fill_reply_hdr() and fc_fill_hdr() Robert Love
2010-07-20 22:21 ` [PATCH 23/28] libfc: add interface to allocate a sequence for incoming requests Robert Love
2010-07-20 22:21 ` [PATCH 24/28] libfc: don't require a local exchange " Robert Love
2010-07-20 22:21 ` [PATCH 25/28] fcoe: fix offload feature flag change from netdev Robert Love
2010-07-20 22:21 ` [PATCH 26/28] Revert "[SCSI] fcoe: Fix using VLAN ID in creating lport's WWWN/WWPN" Robert Love
2010-07-20 22:21 ` [PATCH 27/28] libfc: Add retry logic to lport state machine when receiving LS_RJT Robert Love
2010-07-20 22:21 ` [PATCH 28/28] fcoe: remove check for zero fabric name Robert Love
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100720222035.17116.66903.stgit@localhost.localdomain \
--to=robert.w.love@intel.com \
--cc=James.Bottomley@suse.de \
--cc=jeykholt@cisco.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).